Synthesis and characterization of amphiphilic graft copolymer poly(ethylene oxide)-graft-poly(methyl acrylate)

A novel well-defined amphiphilic graft copolymer of poly(ethylene oxide) as main chain and poly(methyl acrylate) as graft chains is successfully prepared by combination of anionic copolymerization with atom transfer radical polymerization (ATRP). The glycidol is protected by ethyl vinyl ether first, then obtained 2,3-epoxypropyl-1-ethoxyethyl ether (EPEE) is copolymerized with EO by initiation of mixture of diphenylmethyl potassium and triethylene glycol to give the well-defined poly(EO-co-EPEE), the latter is deprotected in the acidic conditions, then the recovered copolymer [(poly(EO-co-Gly)] with multi-pending hydroxyls is esterified with 2-bromoisobutyryl bromide to produce the ATRP macroinitiator with multi-pending activated bromides [poly(EO-co-Gly)_(ATRP)] to initiate the polymerization of methyl acrylate (MA). The object products and intermediates are characterized by NMR, MALDI-TOF-MS, FT-IR, and SEC in detail. In solution polymerization, the molecular weight distribution of the graft copolymers is rather narrow (M_w/M_n < 1.2), and the linear dependence of Ln [M₀]/[M] on time demonstrates that the MA polymerization is well controlled.     

High molecular weight methyl ester of microbial poly(β,l-malic acid): Synthesis and crystallization

High molecular weight poly(α-methyl β,l-malate) (M_n ∼ 25,000, PD ∼ 1.7) was prepared from microbial poly(β,l-malic acid) (M_n ∼ 29,000, PD ∼ 1.3) by methylation with diazomethane in dry acetone without substantial cleavage of the polyester main chain. The thermal properties of this poly(malate) were assessed and its crystal structure was preliminary examined. Two crystal forms were identified by X-ray diffraction, their occurrence being dependent on crystallization conditions. The kinetics of nonisothermal and isothermal crystallizations from the melt were studied and modelled using the Avrami approach. Results were compared to those recently reported by us for low molecular weight poly(α-methyl β,l-malate) (M_n ∼ 3000, PD ∼ 1.3).     

Synthesis and characterization of highly soluble 9,10-diphenyl-substituted poly(2,6-anthracenevinylene)

We report the synthesis and optoelectronic properties of highly soluble poly(9,10-bis(3′,4′-di(2″-ethylhexyloxy))phenyl)-2,6-anthracenevinylene) (HSM-PAV). The key intermediate for the synthesis of HSM-PAV is 2,6-dimethyl-9,10-dibromoanthracene, and the high solubility of HSM-PAV is from the incorporation of lateral 3,4-di(2-ethylhexyloxy)phenyl moieties into the 9,10-positions of anthracene units. The increase of side alkyloxy groups endows HSM-PAV with higher molecular weight (M_n = 3.2 × 10⁴) and better electroluminescence performances (L_max = 590 cd/m², LE_max = 0.27 cd/A) compared with the poly(2,6-anthracenevinylene) with lateral monoalkyoxy moieties (M_n = 1.9 × 10⁴, L_max = 340 cd/m², LE_max = 0.17 cd/A). The electrical conductivity of doped HSM-PAV film with iodine is 5 × 10⁻² S cm⁻¹ that is several order higher than that of doped 9,10-anthracene-based polymers, further demonstrating that linkage position has a dramatic effect on the optoelectronic properties of anthracene-based conjugated polymers.     

Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)

Plasticization of semicrystalline poly(l-lactide) (PLA) with a new plasticizer - poly(propylene glycol) (PPG) is described. PLA was plasticized with PPG with nominal M_w of 425 g/mol (PPG4) and 1000 g/mol (PPG1) and crystallized. The plasticization decreased T_g, which was reflected in a lower yield stress and improved elongation at break. The crystallization in the blends was accompanied by a phase separation facilitated by an increase of plasticizer concentration in the amorphous phase and by annealing of blends at crystallization temperature. The ultimate properties of the blends with high plasticizer contents correlated with the acceleration of spherulite growth rate that reflected accumulation of plasticizer in front of growing spherulites causing weakness of interspherulitic boundaries. In PLA/PPG1 blends the phase separation was the most intense leading to the formation of PPG1 droplets, which facilitated plastic deformation of the blends that enabled to achieve the elongation at break of about 90-100% for 10 and 12.5 wt% PPG1 content in spite of relatively high T_g of PLA rich phase of the respective blends, 46.1-47.6 °C. Poly(ethylene glycol) (PEG), long known as a plasticizer for PLA, with nominal M_w of 600 g/mol, was also used to plasticize PLA for comparison.     

Synthesis and properties of various poly(diphenylacetylenes) containing tert-amine moieties

The polymerization of diphenylacetylene derivatives possessing tert-amine moieties, such as triphenylamine, N-substituted carbazole and indole, was examined in the presence of TaCl₅-n-Bu₄Sn (1:2) catalyst. A polymer with high molecular weight (M_w = 570 × 10³) was obtained in good yield by the polymerization of diphenylamine-containing monomer 1b, whereas the isopropylphenylamine derivative (1c) gave a polymer with relatively low molecular weight (M_w = 2.4 × 10³). The polymerization of monomer 1d containing cyclohexylphenylamine group did not proceed; however, carbazolyl- and indolyl-containing monomers also produced polymers. Poly(1b), poly(2f) and poly(4b) could be fabricated into free-standing membranes by casting toluene solutions of these polymers. The gas permeability of poly(1b) was too low to be evaluated accurately whereas poly(4b) possessing two chlorine atoms in the repeating unit showed higher gas permeability than that of poly(1b); furthermore, poly(2f) having trimethylsilyl and 3-methylindolyl groups exhibited relatively high gas permeability (). In the cyclic voltammograms of diphenylamino group-containing polymers, poly(1b) and poly(2b), the intensities of oxidation and reduction peaks decreased more than those of carbazolyl-containing poly(2a). The molar absorptivity (?) of poly(1b) at ∼700 nm increased with increasing applied voltage in the UV-vis spectrum.     

Branched poly(arylene ether ketone)s with tailored thermal properties: Effects of AB/AB2 ratio, core (B3) percentage, and reaction temperature

A series of poly(ether ketone) copolymers were prepared by nucleophilic aromatic polymerization reactions of the AB monomer 4-fluoro-4′-hydroxybenzophenone, 1, and the AB₂ monomer bis(4-fluorophenyl)-(4-hydroxyphenyl)phosphine oxide, 2, in the presence of 3 or 5 mol% of a highly reactive core molecule, tris(3,4,5-trifluorophenyl)phosphine oxide (B₃), 4. All of the copolymers prepared in the presence of a core molecule were sufficiently soluble in N-methylpyrrolidinone, NMP, to allow the determination of their molecular weights and polydispersity indices, PDIs. Number-average molecular weights, M_ns, of 3200-6800 Da were determined and the PDI values ranged from 1.41 to 4.07. The M_n was controlled by the mol% of 4 present in the reaction mixture with higher molar percentages leading to lower M_n values. Lower reaction temperatures and lower ratios of AB/AB₂ monomers afforded copolymers with lower PDI values. As expected, the crystallinity of the samples decreased with an increasing AB₂ content or an increase in PDI. The copolymers also exhibited excellent thermo-oxidative stability with a number of samples suffering 5% weight losses at temperatures, in air, well in excess of 450 °C.     

Conformational characteristics of poly(ethylene oxide) (PEO) in methanol

The conformational characteristics of poly(ethylene oxide) (PEO) in methanol at 25 °C were investigated by static light scattering and viscometry for high molar mass (M_w) PEO fractions covering M_w = 3.42 × 10⁵-5.05 × 10⁶ g mol⁻¹. No trace of downturn in the plot of angular dependence of Kc/R_θ at low angle was found. Experimental scaling laws for the second virial coefficient (A₂), the third virial coefficient (A₃), the radius of gyration and the intrinsic viscosity ([η]) were determined. The exponents characterizing these scaling laws confirmed that the PEO chain in methanol has a flexible conformation with relatively large excluded volume, but methanol is not as good solvent as water. On the other hand, the low value of interpenetration function (Ψ) and the relatively higher order of the dimensionless parameter Π are considered to be an indication of local chain stiffness. All the results obtained in this study allow us to conclude that the overall chain conformation of PEO assumed in methanol is basically a random coil, but is intermittently mixed with helical structure.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Morphology and crystal structures of poly(2,6-naphthalene terephthalate) and poly(2,6-naphthalene naphthalate)

The morphology and crystal structures of poly(2,6-naphthalene terephthalate) (PNT) and poly(2,6-naphthalene naphthalate) (PNN), prepared by confined thin film melt/solution polymerization (CTFMP/CTFSP), were characterized by transmission electron microscopy, electron diffraction and molecular modeling. The unit cells of PNT and PNN are both monoclinic (P12₁/a1 space group) with parameters a=8.18 Å, b=5.80 Å, c=14.9 Å and β=101.9° for PNT, and a=7.85 Å, b=5.97 Å, c=17.1 Å and β=99.5 for PNN, respectively. Simulated ED patterns from the proposed unit cells agree well with the observed ED patterns. The crystal structures of PNT and PNN are also compared with those of poly (p-phenylene naphthalate) (PPN) and poly(2,6-oxynaphtalate) (PONA).     

Synthesis of poly(methyl methacrylate)-silica nanocomposites using methacrylate-functionalized silica nanoparticles and RAFT polymerization

Well-defined poly(methyl methacrylate)-silica nanocomposites were produced by “grafting through” using reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of silica nanoparticle was modified covalently by attaching methacryl group to the surface using 3-methacryloxypropyldimethylchlorosilane. Polymerization of methyl methacrylate (MMA) using the 4-cyano-4-(dodecylsulfanylthiocarbonyl)sulfanyl pentanoic acid RAFT agent, produced the PMMA-SiO₂ nanocomposites. Characterization of these well-defined nanocomposites included FT-IR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), transmission electron microscopy (TEM) and dynamic mechanical analysis. These results show that the T_g values are higher and the mechanical strength of the PMMA-SiO₂ nanocomposites is slightly improved when compared to bulk PMMA. Further, the molecular weight of the PMMA (up to M_n = 100,000) is controlled and the SiO₂ are well dispersed in the PMMA matrix.     

Double propagation based on diepoxide, a facile route to high molecular weight poly(propylene carbonate)

Poly(propylene carbonate) (PPC) with number average molecular weight (M_n) higher than 200 kg/mol was prepared via the terpolymerization of carbon dioxide, propylene oxide and diepoxide using Y(CCl₃OO)₃-ZnEt₂-glycerine coordination catalyst. When equimolar ZnEt₂ and diepoxide were used, double propagation active species were generated in situ by nucleophilic attack of metal alkoxide on diepoxide, leading to PPC of doubled M_n value. The molecular weight of PPC has dramatic influence on its thermal and mechanical performances. PPC with M_n of 227 kg/mol showed modulus of 6900 MPa, while the modulus of PPC with M_n of 109 kg/mol was only 4300 MPa. Moreover, when M_n increased from 109 to 227 kg/mol, a 37 °C increase of the onset degradation temperature was observed.     

Crystallization, structure and properties of plasticized poly(l-lactide)

Poly(l-lactide) (PLA) was plasticized with poly(ethylene glycol)s having M_w of 400 and 600 g/mol. In addition to poly(ethyne glycol)s with hydroxyl end groups, monomethyl ethers of poly(ethylene glycol) having M_w of 550 and 750 g/mol, with chains terminated with hydroxyl groups and methyl groups, were used. The effect of different end groups on the plasticization of both amorphous and semicrystalline PLA was studied. The crystallization, structure, thermal and tensile properties of PLA and PLA with 5 and 10 wt% of plasticizers were explored. No marked effect induced by different end groups of plasticizers was found. All the plasticizers used decreased T_g and increased the ability of PLA to cold crystallization. While an amorphous plasticized PLA could be deformed to about 550%, a semicrystalline PLA with the same total plasticizer content exhibited nonuniform plasticization of the amorphous phase and less ability to the plastic deformation. Nevertheless, a 20% elongation at break was achieved for a semicrystalline PLA with 10 wt% of the plasticizer. The plastic deformation of both neat and plasticized PLA was associated with crazing.     

Structure-property behavior of poly(dimethylsiloxane) based segmented polyurea copolymers modified with poly(propylene oxide)

Poly(propylene oxide) (PPO) was incorporated in a controlled manner between poly(dimethylsiloxane) (PDMS) and urea segments in segmented polyurea copolymers and their solid state structure-property behavior was investigated. The copolymers contained PDMS segments of MW 3200 or 7000 g/mol and an overall hard segment content of 10-35 wt%. PPO segments of MW 450 or 2000 g/mol were utilized. Equivalent polyurea copolymers based on only PDMS as the soft segment (SS) component were used as controls. The materials (with or without PPO) utilized in this study were able to develop microphase morphology as determined from dynamic mechanical analysis (DMA) and small angle X-ray scattering (SAXS). DMA and SAXS results suggested that the ability of the PPO segments to hydrogen bond with the urea segments results in a limited inter-segmental mixing which leads to the formation of a gradient interphase, especially in the PPO-2000 co-SS containing copolymers. DMA also demonstrated that the polyureas based on only PDMS as the SS possessed remarkably broad and nearly temperature insensitive rubbery plateaus that extended up to ca. 175 °C, the upper temperature limit depending upon the PDMS MW. However, the incorporation of PPO resulted in more temperature sensitive rubbery plateaus. A distinct improvement in the Young's modulus, tensile strength, and elongation at break in the PPO-2000 and PDMS-7000 containing copolymers was observed due to inter-segmental hydrogen bonding and the formation of a gradient interphase. However, when PPO was incorporated as the co-SS, the extent of stress relaxation and mechanical hysteresis of the copolymers increased relative to the segmented polyureas based on the utilization of only PDMS as the soft segment component.     

Physicochemical characterization of poly(tert-butyl acrylate-b-methyl methacrylate) prepared with atom transfer radical polymerization by inverse gas chromatography

Poly(tert-butyl acrylate) (PtBuA) was synthesized by atom transfer radical polymerization (ATRP) using methyl-2-bromo propionate (MBP) as an initiator in bulk at 80 °C. The successive ATRP of methyl methacrylate in diphenyl ether at 80 °C using previously obtained PtBuA as a macroinitiator led to formation of poly(tert-butyl acrylate-b-methyl methacrylate) (poly(tBuA-b-MMA)). The synthesized macroinitiator and block copolymer have controlled molecular weight and low polydispersity (M_w/M_n<1.2). The block copolymer was characterized by gel permeation chromatography (GPC) and ¹H NMR. The retention diagrams of poly(tBuA-b-MMA) for some aliphatic esters and aromatic hydrocarbons were obtained using inverse gas chromatography (IGC) technique. The glass transition temperatures, T_gs of poly(tBuA-b-MMA) were determined by both differential scanning calorimeter (DSC) and IGC. It was observed that the block copolymer represents three T_gs at 50, 75 and 100 °C by IGC although it represents only one T_g at 71 °C by DSC. After the column was quenched from 180 to 0 °C, the T_g at 100 °C shifted to 105 °C however others did not change. Specific retention volumes, and the thermodynamical polymer-solvent interaction parameters such as Flory-Huggins, , equation-of-state, and effective exchange energy, X_eff were found for all studied solvents. Partial molar heat of sorption, , partial molar heat of mixing, and molar heat of vaporization, ΔH_v, were determined. In addition, the solubility parameter of the corresponding block copolymer, δ₂ was determined as 11.0 (cal/cm³)^1/2 at 25 °C.     

Preparation and characterization of graft copolymers of methyl methacrylate and poly(n-hexyl isocyanate) macromonomers

Living poly(n-hexyl isocyanate) (PHIC) was deactivated with methacryloyl chloride to produce methacryl-terminated poly(n-hexyl isocyanate) (PHIC-MA) rodlike macromonomers. Radical copolymerization of methyl methacrylate (MMA) with PHIC-MA was performed using 2,2′-azobis(isobutyronitrile) as an initiator in benzene at 60 °C to prepare poly(methyl methacrylate)-graft-poly(n-hexyl isocyanate) (PMMA-graft-PHIC) graft copolymers. The monomer reactivity ratios of MMA (M₁) and PHIC-MA (M₂) were evaluated as r₁=11.5 and r₂=∼0, exhibiting remarkably lower reactivity of PHIC-MA macromonomer than that of common macromonomers. The resultant graft copolymers were characterized using gel permeation chromatography equipped with low-angle laser light-scattering to determine the molecular weights, and equipped with a refractive index detector and an ultraviolet light detector to estimate a PHIC weight fraction of PMMA-graft-PHIC at the ith elution volume of the GPC chromatogram. There are 2-3 PHIC grafts per PMMA molecule, and the PHIC rodlike chains might be difficult to introduce into the PMMA main chains having higher molecular weights. A specific dimension of PMMA-graft-PHIC in solution was discussed in detail.     

Influence of metal coordination on conductivity behavior in poly(butadiene-acrylonitrile)-CoCl2 system

The metal complex formation and the electrical properties of amorphous solid polymer electrolytes, based on poly(butadiene-acrylonitrile) copolymer (PBAN) and CoCl₂, have been studied over the homogeneity region of the system limited by the CoCl₂ concentration of 1.89 mol kg⁻¹. It has been found that ionic conductivity is carried out by the unipolar anion transfer at lower CoCl₂ concentrations (up to 0.10 mol kg⁻¹). As the CoCl₂ concentration increases, electronic conductivity appears in addition to ionic conductivity, and the former becomes dominant, starting from 0.38 mol kg⁻¹. It has been shown that the nature of charge carriers is determined by the composition of metal complexes formed by CoCl₂ and the macromolecular solvent PBAN. At lower concentrations, the [Co₂L₂Cl₄]⁰ dimers are the predominant species (L being macromolecule side groups CN), and their dissociation is followed by the formation of mobile Cl⁻ anions and immobile binuclear [Co₂Cl₃]⁺ complexes. As CoCl₂ concentration increases, polynuclear [Co_nL₂Cl_2n]⁰ (n > 2) complexes appear (L being CN and CC groups of PBAN). Specific features of chemical bonds in π-complexes of transition metals result in the appearance of electronic charge carriers. The abrupt increase in conductivity observed at the highest CoCl₂ concentration is connected with the formation of a percolation network of polynuclear [Co_nL₂Cl_2n]⁰ complexes.     

Synthesis of amphiphilic triblock copolymer of polystyrene and poly(4-vinylbenzyl glucoside) via TEMPO-mediated living radical polymerization

4-Vinylbenzyl glucoside peracetate 1 was polymerized with α,α′-bis(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)-1,4-diethylbenzene 2 in chlorobenzene using (1S)-(+)-10-camphorsulfonic acid anhydrous (CSA) as an accelerator ([1]=0.4 M,[1]/[2]/[CSA]=75/1/1.3) at 125 °C for 5 h. The polymerization afforded poly(4-vinylbenzyl glucoside peracetate) having TEMPO moieties on both sides of the chain ends, 3, with a molecular weight (M_w,SLS) of 8500, a polydispersity index (M_w/M_n) of 1.09, and an average degree of polymerization of the 1 unit (x) of 17. Styrene (St) was polymerized with 3 in chlorobenzene at 125 °C (St/chlorobenzene=1/2, w/w). The polymerization successfully afforded polystyrene-poly(4-vinyl glucoside peracetate)-polystyrene, 4, when the polymerization time was below about 2 h. Polymer 4 with the M_w,SLS of 12,500, 17,900, and 29,400, the compositions (y-x-y) of 20-17-20, 45-17-45, and 100-17-100, and the M_w/M_n of 1.12, 1.14 and 1.17 were modified by deacetylation using sodium methoxide in dry-THF into polystyrene-poly(4-vinyl glucoside peracetate)-polystyrene, 5. The solubility of polymer 5 was examined using a good solvent for polystyrene such as toluene and for the saccharide such as H₂O.     

Synthesis and properties of polyacetylenes carrying N-phenylcarbazole and triphenylamine moieties

Novel acetylene monomers containing N-phenyl-substituted carbazole (Cz) and triphenylamine (TPA) groups, namely, 3-ethynyl-9-phenylcarbazole (1) and p-(N,N-diphenylamino)phenylacetylene (2) were synthesized, and polymerized with several Rh-, W-, and Mo-based catalysts. Poly(1) and poly(2) with high number-average molecular weights (15?500-974?000) were obtained in good yields (77-97%), when [(nbd)RhCl]₂-Et₃N (nbd = norbornadiene) was used as a catalyst. The polymers exhibited UV-vis absorption peaks derived from the Cz and TPA moieties at 250-350 nm and polyacetylene backbone above 350 nm. The UV-vis absorption band edge wavelengths of the polymers were longer than those of the corresponding monomers. Poly(2) exhibited a UV-vis absorption peak at a longer wavelength than poly(1) did, which indicates that poly(2) has main chain conjugation longer than that of poly(1). The molecular weights and photoluminescence quantum yields of the polymers obtained by the polymerization using [(nbd)RhCl]₂-Et₃N were larger than those of the Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃]-based counterparts. The cyclic voltammograms of the polymers indicated that they had clear electrochemical properties; the onset oxidation voltage of poly(1) was higher than those of N-alkyl-substituted Cz derivatives. The polymers showed electrochromism and changed the color from pale yellow to blue by application of voltage, presumably caused by the formation of charged polaron at the Cz and TPA moieties. The temperatures for 5% weight loss of the polymers were around 350-420 °C under air, indicating the high thermal stability.