Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Synthesis and properties of optically active substituted polyacetylenes having carboxyl and/or amino groups

Polyacetylenes having carboxyl and/or amino groups in the side chain were synthesized by the polymerization of N-(2-propynyloxycarbonyl)-l-alanine (1) and l-alanine N-propargylamide (2) catalyzed with a rhodium cation complex. Poly(1_0.5-co-2_0.5) exhibited a larger CD signal than the homopolymers. The polymer mixtures obtained by the polymerization of 1 in the presence of poly(2), and those obtained by the polymerization of 2 in the presence of poly(1) showed specific rotations larger than calculated. The polymerization of propargylamine in the presence of poly(1) did not exhibit significant effect, while the polymer mixtures obtained by the polymerization of propiolic acid in the presence of poly(2) exhibited [α]_D of positive sign, although poly(2) alone exhibited [α]_D of negative sign.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Polymerization of cysteine functionalized thiophenes

Different synthetic pathways leading to polythiophenes (PTs) containing units derived from methyl N-(tert-butoxycarbonyl)-S-3-thienyl-l-cysteinate (1) and methyl N-(tert-butoxycarbonyl)-S-(2-thien-3-ylethyl)-l-cysteinate (2) were investigated. The oxidative coupling with FeCl₃ applied to N-deprotected monomer 1 generates a chemically fleeting PT, whereas when applied to N-deprotected monomer 2 generates a mixture of oligomers. Two co-polymers bearing cysteine moieties, poly{[methyl N-(tert-butoxycarbonyl)-S-3-thienyl-l-cysteinate]-co-thiophene} (co-PT1) and poly{[methyl N-(tert-butoxycarbonyl)-S-(2-thien-3-ylethyl)-l-cysteinate]-co-thiophene} (co-PT2), were eventually synthesized through Stille coupling of 2,5-bis(trimethylstannyl)thiophene and 2,5-dibromo derivative of compound 1 and through the post-functionalization with protected cysteine of a tosylate co-polymer, poly{[2-(3-thienyl)ethyl 4-methylbenzenesulfonate]-co-thiophene} (co-PTTs). UV-vis, CD, NMR and GPC analyses evidenced that these polymers are able to form chiral self-assembling structures, due to the formation of a hydrogen bond network and to π-stacks, not only in the solid state but also in solution.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Copolymerization of ethylene and 2-vinylnaphtalene with titanium and zirconium catalysts

Copolymerization of ethylene and 2-vinylnaphtalene (VN) has been investigated with dimethylsilylene(tetramethylcyclopentadienyl)(N-tert-butyl)titanium dichloride (1) and rac-isopropylidenebis(indenyl)zirconium dichloride (2) using methylaluminoxane as a cocatalyst. The copolymerization gave the corresponding copolymer in good yield. The catalyst 1 showed higher incorporation of VN than the catalyst 2. Thermal properties of the resulting copolymers were investigated by DSC in comparison with those of poly(ethylene-co-styrene), and poly(ethylene-co-VN) showed higher T_g than poly(ethylene-co-styrene).     

Synthesis and characterization of fluorene-carbazole and fluorene-phenothiazine copolymers with carbazole and oxadiazole pendants for organic light emitting diodes

We report the synthesis and characterization of new series of the fluorene based polymers with carbazole and oxadiazole pendants for the generation of the white emission out of the EL device. In the fluorene backbone, hole transporting units such as carbazole or phenothiazine were incorporated to improve the EL brightness and efficiency. The PFCzOxd-co-PCzs and PFCzOxd-co-PPTZs in EL spectra showed maximum peaks at around 430 nm and additional large peaks at around 530 and 500 nm, respectively. In case of PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz, the EL spectra of the polymers showed two distinct peaks comprising the maximum at 427 nm, which corresponds to the EL spectra of the conjugated backbone, and additional broad peaks at around 540 and 530 nm, respectively. The CIE coordinates of the devices from PFCzOxd-alt-PCz and PFCzCzPCz-co-PFOxdOxdPCz were (0.28, 0.33) and (0.25, 0.32), respectively, approaching the value of the standard white of National Television System Committee (NTSC) (0.33, 0.33).     

Radical copolymerization of methyl 2-norbornene-2-carboxylate and 2-phenyl-2-norbornene with styrene, alkyl acrylate, and methyl methacrylate: Facile incorporation of norbornane framework into polymer main chain and its effect on glass transition temperature

Radical copolymerization behavior of methyl 2-norbornene-2-carboxylate 1 and 2-phenyl-2-norbornene 2 was investigated. Radical copolymerization of 1 and 2 with styrene, alkyl acrylate, and methyl methacrylate in a variety of monomer combinations afforded copolymers, whose main chains consisted of norbornane framework. Relative monomer reactivity ratios for the copolymerization of 1 and 2 with n-butyl acrylate (n-BA) were determined by the Fineman-Ross method. Temperature-modulated DSC analysis for poly(1 or 2-co-n-BA)s revealed remarkable T_g-raising effect of incorporation of norbornane framework into the polymer main chain, compared to that effect of styrene repeating unit.     

Optically active methacrylic copolymers with side-chain azoaromatic and 9-phenylcarbazole moieties

The synthesis and structural characterization of optically active copolymers such as poly[(S)-(+)-MCPP-co-(S)-MAP-N] and poly[(S)-(+)-MCPP-co-(S)-MAP-C] has been performed in order to obtain a multifunctional photonic material for chiroptical switches and for optical storage applications.The observed chiroptical properties suggest the presence of ordered chiral conformations at least for the chain segments of the macromolecules. Spectroscopic, thermal and chiroptical characterization of these copolymers demonstrate the occurrence of significant electronic interactions between the carbazole chromophores and the azobenzene moieties. The photoinduction of birefringence of copolymer films has been investigated in order to evaluate their behavior as a material for optical data storage. Surface-relief gratings (SRG) have also been inscribed on the material.The results are interpreted in terms of copolymer composition, cooperative behavior and conformational stiffness of the chromophoric co-units.     

Post-polymerization modification and organocatalysis using reactive statistical poly(ionic liquid)-based copolymers

Copoly(ionic liquid)s (coPILs) based on poly(styrene)-co-poly(4-vinylbenzylbutylimidazolium) with different anions (Cl⁻ and HCO₃⁻), denoted as PS-co-PVBnBuImCl 1 and PS-co-PVBnBuImHCO₃2, were used as reactive polymers for the purpose of post-polymerization modification and organic catalysis. While coPIL 1 could be derived into the corresponding poly(N-heterocyclic carbene)-silver transition metal complex referred to as poly(NHC–Ag) by a simple deprotonation/metallation sequence utilizing Ag₂O, coPIL 2 was found to quantitatively react with various electrophiles, including CS₂, isothiocyanate and transition metals (based on Pd and Au) upon formal loss of “H₂CO₃, affording the post-functionalized poly(NHC-CS₂), poly(NHC-isothiocyanate) and poly(NHC-Met) (Met = Au, Pd) copolymers. The catalytic activity of both coPILs 1 and 2 was also examined in cyclic carbonate formation by reaction between CO₂ and propylene oxide and in the benzoin condensation, respectively.     

Synthesis of conjugated polymers with broad absorption bands and photovoltaic properties as bulk heterojuction solar cells

Two new broad absorbing alternating copolymers, poly[1-(2,6-diisopropylphenyl)-2,5-bis(2-thienyl)pyrrole-alt-4,7-bis(3-octyl-2-thienyl)benzothiadiazole] (PTPTTBT-P1) and poly[1-(p-octylphenyl)-2,5-bis(2-thienyl)pyrrole-alt-4,7-bis(3-octyl-2-thienyl)benzothiadiazole] (PTPTTBT-P2), were prepared via Suzuki polycondensation with high yields. The two polymers were found to show characteristic absorption in the visible region of the solar spectrum. Interestingly the absorption of PTPTTBT-P1 was found to cover the visible region from 350 to 650 nm with the broad and flat absorption maximum from 440 to 510 nm in film and the absorption of PTPTTBT-P2 was found to cover the visible region from 350 to 950 nm with the relatively distinct absorption maxima at 425 and 522 nm and very weak absorption maximum at 832 nm in film. The electrochemical band gaps of the polymers were calculated to be 1.88 eV and 1.87 eV, respectively, while the optical band gaps of the polymers were calculated to be 1.94 eV and 1.87 eV, respectively. The photovoltaic properties of polymers were investigated with bulk heterojunction (BHJ) solar cells fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM(1:5 wt%)/TiOx/Al configurations. The maximum power conversion efficiency (PCE) of the solar cell composed of PTPTTBT-P1:PC₇₀BM as an active layer was 1.57% with current density (J_sc) of 8.17 mA/cm², open circuit voltage (V_oc) of 0.52 V and fill factor (FF) of 36%.     

Synthesis and electro-optical properties of helical polyacetylenes carrying carbazole and triphenylamine moieties

Novel chiral acetylene monomers bearing carbazole and triphenylamine groups, namely, (S)-3-butyn-2-yl 2-(9-carbazolyl)ethyl carbonate (1) and (S)-3-butyn-2-yl 4-(diphenylamino)benzoate (2) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] catalyst to give the corresponding polymers with moderate molecular weights (M_n 13.0 × 10³ and 15.5 × 10³) in good yields (86% and 88%). CD spectroscopic studies revealed that poly(1) and poly(2) took predominantly one-handed helical structure in CHCl₃. The helical structures of poly(1) and poly(2) were very stable against heating and addition of MeOH. The solution of poly(1) and poly(2) emitted fluorescence in 0.52% and 7.2% quantum yields, which were lower than those of the corresponding monomers 1 and 2 (22.5% and 76.5%). The cyclic voltammograms of the polymers indicated that the oxidation potentials of the polymers were lower than those of the monomers. The polymers showed electrochromism and changed the color from pale yellow to pale blue by application of voltage, presumably caused by the formation of polaron at the carbazole and triphenylamine moieties. The onset temperatures of weight loss of poly(1) and poly(2) were 225 and 270 °C under air.     

Preparation and properties of polytolan membranes bearing p-hydroxyl groups

The polymerization of a novel monomer p-(t-butyldimethylsiloxy)tolan (1) with TaCl₅-n-Bu₄Sn provided a high molecular weight polymer (poly(1)), whose M_w reached 4.0×10⁶. The poly(1) membrane was prepared by the casting method, and converted into poly[(p-hydroxy)tolan] (poly(2)) with a mixture of trifluoroacetic acid/water. Whereas poly(1) dissolved in low polarity solvents such as toluene and chloroform, poly(2) was practically insoluble in any solvents, although it partly dissolved in methanol and ethanol. The onset weight loss temperatures of poly(1) and poly(2) in air were 320 and 360 °C, respectively, indicating fair thermal stability among substituted polyacetylenes. The oxygen permeability coefficients (P_O2) of poly(1) was 150 barrers, which is relatively small among polytolan derivatives, while that of poly(2) was 8.0 barrers and smaller owing to the presence of polar hydroxyl groups.     

Synthesis and gas permeability of ester substituted poly(p-phenylene)s

Polymerizations of various ester substituted 2,5-dichlorobenzoates [substituent: linear alkyl groups (1a-f), branched alkyl groups (1g-l), cyclohexyl groups (1m-o), phenyl groups (1p-r), and oxyethylene units (1s-v)] were investigated with Ni-catalyzed/Zn-mediated system in 1-methyl-2-pyrrolidone (NMP) at 80 °C. Most of monomers bearing linear and branched alkyl groups successfully polymerized to give relatively high-molecular-weight polymers (M_n = 10,000-20,800). However, the molecular weight of the polymer having eicocyl groups was low because of steric hindrance of long alkyl chain. The polymerizations of cyclohexyl 2,5-dichlorobenzoate and phenyl 2,5-dichlorobenzoate produced low-molecular-weight polymers, while the polymerizations of monomers with alkyl cyclohexyl and alkyl phenyl groups proceeded to afford polymers with relatively high-molecular-weights. The polymers possessing oxyethylene units were obtained, but the molecular weights were low when the oxyethylene chains were long. The gas permeability of membranes of poly(p-phenylene)s with alkyl chains increased as increasing the length of alkyl chain. The membranes of poly(p-phenylene)s with phenyl groups and oxyethylene units exhibited high densities and relatively low gas permeability. However, the CO₂/N₂ separation factor of membrane of poly(p-phenylene) having oxyethylene units was as large as 73.6.     

Nanostructured polymer blend formed from poly(N-vinylpyrrolidone) and end-functional polystyrene

Phase structures of blends of poly(N-vinylpyrrolidone) (PVP) with SO₃H terminated polystyrene (PSS) were investigated. The PVP-PSS blends were macroscopically homogeneous, although the blends of PVP with polystyrene (PS) showed macroscopic phase separation. The PVP-PSS blends, however, showed two glass transitions indicating existence of two phases. Small-angle X-ray scattering measurements revealed the PVP-PSS blends formed mesomorphically ordered morphologies which change with variation of blend composition. The nano-organized phase separation in the PVP-PSS blends was caused due to hydrogen bonding of the PVP with the terminal SO₃H group of the PSS and repulsive interaction between PVP and main chain of the PSS.     

Redox-active conducting polymers incorporating ferrocenes. Preparation, characterization and bio-sensing properties of ferrocenylpropyl and -butyl polypyrroles

The multi-step synthesis of the novel ferrocene-substituted pyrrole monomers, N-(3-ferrocenylpropyl)pyrrole (1), and 3-(4-ferrocenylbutyl)pyrrole (2), have been studied and optimized. A single crystal X-ray structure analysis has been performed on the synthetic intermediate 3-(4-ferrocenylbutyl)-N-(triisopropylsilyl)pyrrole. Monomers 1 and 2 can be electropolymerized to form the homopolymer, poly-2, and the copolymers, pyrrole-co-1 and pyrrole-co-2. The polymers have been characterized using cyclic voltammetry, UV-visible spectroscopy, scanning electron microscopy (SEM) and four-point probe conductivity measurements. The use of pyrrole-co-1 coatings for quantitative sensing and determination of the redox-active enzyme cytochrome C in solution has been demonstrated.     

Synthesis and properties of polyacetylenes having pendent phenylethynylcarbazolyl groups

Novel acetylene monomers substituted with phenylethynylcarbazolyl groups, 3-[(4-octylphenyl)ethynyl]-9-propargylcarbazole (1), 3,6-bis[(4-octylphenyl)ethynyl]-9-propargylcarbazole (2), 9-(4-ethynylphenyl)-3-[(4-octylphenyl)ethynyl]carbazole (3), and 9-(4-ethynylphenyl)-3,6-bis[(4-octylphenyl)ethynyl]carbazole (4) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] and WCl₆-n-Bu₄Sn catalysts. The corresponding polyacetylenes with number-average molecular weights ranging from 9200 to 94?000 were obtained in 20-98% yields. The IR spectra of the polymers revealed that acetylene polymerization took place at the terminal ethynyl group, while the ethynylene group remained intact. The UV-vis absorption band edge wavelengths of W-based poly(3) and poly(4) were longer than those of the other polymers. W-Based poly(4) emitted fluorescence with the highest quantum yield (41%). Poly(1) exhibited excimer-based fluorescence in dilute solution.     

Metallocene-catalyzed synthesis of polyethylenes with side-chain triarylamines: Effects of catalyst structure and triarylamine functionality

The copolymerization of ethylene with 8-triarylamine (TAA) substituted 1-octene monomers (TAA = triphenylamine (M1), N,N-diphenyl-m-tolylamine (M2), N,N-diphenyl-1-naphthylamine (M3)) using various types of group 4 single-site catalytic systems (Cp₂ZrCl₂ (C1), rac-EBIZrCl₂ (C2), rac-SBIZrCl₂ (C3), i-PrCpFluZrCl₂ (C4), Me₂Si(η⁵-C₅Me₄)(η¹-N-^tBu)TiCl₂ (C5)) was investigated to prepare functionalized polyethylene with side-chain TAA groups. The metallocene/methylaluminoxane (MAO) catalytic systems (C1-C4) efficiently lead to the production of high-molecular-weight poly(ethylene-co-M1). While the C4/MAO catalytic system shows the highest comonomer response, the C5/MAO system exhibits the poor compatibility with the M1 comonomer. Copolymerization results of ethylene with M1-M3 using C4/MAO indicate that M1-M3 are well tolerated by both the cationic active species of C4 and MAO cocatalyst, giving rise to the copolymers with high levels of activity and molecular weight. Inspection of the aliphatic region of the ¹³C NMR spectra of the copolymers (P1-P3) having ca. 11 mol% of M1-M3, respectively, reveals the presence of isolated comonomer units with prevailing [EEMEE] monomer sequences in the polymer chain. UV-vis absorption and PL spectra exhibit an apparent low-energy band broadening for P1 and P2 indicative of intrachain aggregate formation. Whereas P2 and P3 undergo completely reversible one-electron oxidation process, P1 shows relatively poor oxidational stability.     

Poly(7-oxanorbornenes) carrying 2,2,6,6-tetramethylpiperidine-1-oxy (TEMPO) radicals: Synthesis and charge/discharge properties

TEMPO-containing 7-oxanorbornene monomers 1-4 (TEMPO = 2,2,6,6-tetramethylpiperidine-1-oxy) were synthesized and polymerized via ring-opening metathesis using a ruthenium carbene catalyst. Monomers 1 and 3 gave polymers with number-average weights of 80?100 and 112?200 in 85 and 96% yields, respectively, whereas monomers 2 and 4 did not provide high molecular weight polymers. Poly(1) and poly(3) were soluble in common solvents including CHCl₃, CH₂Cl₂ and THF, while insoluble in hexane, diethyl ether and MeOH. They were thermally stable up to ca. 240 °C according to the TGA measurements in air. The secondary batteries utilizing the present polymers as cathode-active material demonstrated reversible charge/discharge processes, whose discharge capacities were 107 and 92.8 A h/kg, and displayed excellent high-rate charge and discharge properties. These cells demonstrated excellent cycle life, e.g., the discharge capacities of poly(1) and poly(3) showed less than 10% decrements even after 100 cycles.     

Synthesis and gas permeation properties of various Si-containing poly(diarylacetylene)s and their desilylated membranes

Diarylacetylene monomers having trimethylsilyl groups and other substituents (substituted biphenyl, 1a and 1b; trimethylsilylmethylphenyl, 1c-e) were synthesized and polymerized with TaCl₅-n-Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s (2a-d). Polymers 2a-c had high molecular weights and were soluble in common organic solvents. Free-standing membranes of 2a-c as well as previously reported 2f-h were prepared by the solution-casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid to afford 3a, 3b, and 3f-h. Upon desilylation, biphenyl-containing membranes became less permeable (3a, b), whereas fluorene-containing membranes became more permeable (3f-h). In particular, 3h exhibited extremely high gas permeability (PO₂ = 9800 barrers), which is about the same as that of poly(1-trimethylsilyl-1-propyne). Desilylated membranes 3a and 3f-h showed different gas permeability from that of polymers 2i-k which have the identical chemical structures and obtained directly by the polymerization of the corresponding monomers.