Preparation of nano-TiO2/polyurethane emulsions via in situ RAFT polymerization

Stable nano-TiO₂/polyurethane (PU) emulsions were prepared via in situ reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of 2-hydroxyethyl acrylate (HEA)-capped PU macromonomer, using azobisisobutyronitrile (AIBN) as a radical initiator and 2-{[(butylsulfanyl)carbonothioyl]sulfanyl} propanoic acid (BCSPA) anchored onto TiO₂ nanoparticles (TiO₂-BCSPA) as a RAFT agent. When the molar ratio of AIBN to TiO₂-BCSPA was changed from 1:3 to 1:10, the polydispersity index (PDI) of polymers in the emulsions decreased from 1.83 to 1.06, due to more effective RAFT polymerization in the emulsions. The TiO₂ nanofillers were well-dispersed throughout the polymer films. The tensile strengths of the nanocomposite films were significantly enhanced due to coordination bonding between the TiO₂ nanofillers and the –COOH end groups of the polymers, as evidenced by the FT-IR spectral data.     

Synthesis of TiO2-polymer nanocomposite in supercritical CO2 via RAFT polymerization

Polymer chains of PMMA were grown from nano titania (n-TiO₂) spherical surfaces by the Reversible Addition Fragmentation Chain Transfer Polymerization process (RAFT) using the green solvent, supercritical carbon dioxide (scCO₂). The RAFT agent (1), 4-cyano-4-(dodecylsulfanylthiocarbonylsulfanyl)pentanoic acid, with an available carboxyl group was first coordinated to the n-TiO₂ surface, with the SC(SC₁₂H₂₅) moiety subsequently used for RAFT polymerization of MMA to form the n-TiO₂/PMMA nanocomposites. The livingness of polymerization was verified using GPC, while the morphology of the nanocomposites was studied using thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and dynamic light scattering (DLS). The rate of polymerization and molecular weights at different pressures in scCO₂ and in non-pressurized and pressurized organic solvent (THF) were compared, showing that increased CO₂ pressure provided a higher rate of polymerization and longer chain lengths indicating the utility of this approach.     

New strategy for preparation of LLDPE nanocomposites through tandem catalytic system

Tandem catalytic system composed of the ethylene trimerization catalyst CrCl₃/bis(2-butylsulfanyl-ethyl)amine) (SNS) ( I ) and the ethylene copolymerization catalyst zirconocene dichloride ( II ) has been introduced for preparation of linear low-density polyethylene (LLDPE). The catalytic behavior of the novel catalyst ( I ) activated by modified methyl aluminoxane was tested that afforded 1-hexene (1-C₆) with the activity of 141,370 g 1-C₆/mol-Cr h. The butyl branches in the polymers prepared by tandem catalysis method were determined utilizing Fourier transform infrared (FTIR) spectroscopy for the first time. The higher Cr/Zr molar ratio led to increasing the butyl content within the prepared copolymer up to 10.38 butyl branches per 1000 C in the polymer chain. LLDPE nanocomposites having different types of nanofillers (TiO₂, Santa Barbara Amorphous-15, and Fe₃O₄ magnetic nanoparticles) were prepared and analyzed by FTIR, scanning electron microscopy (SEM), differential scanning calorimetry, and thermogravimetric analysis. Increasing the sonication time up to 60 min enhanced the nanoparticles dispersion in the polymeric matrix. SEM images of the nanocomposites with various amounts of nanofillers, showed the best dispersion of the nanofillers in the presence of 50 mg nanofiller in toluene solvent. The presence of the nanofillers also increased the hydrophilicity of the polymer surface. Antibacterial activity against Gram-negative bacteria was also observed for the prepared nanocomposites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47497.     

The Effect of Surface Modification of TiO2 with Diblock Copolymers on the Properties of Epoxy Nanocomposites

The TiO₂ nanoparticles were modified by diblock copolymers, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), via reversible addition-fragmentation chain transfer (RAFT) polymerization, and the epoxy nanocomposites containing different TiO₂ and with different contents were prepared. Subsequently, the effects of TiO₂ content on the mechanical and thermal properties of nanocomposites were investigated. The results indicated that after grafting copolymers onto TiO₂, the dispersion of TiO₂ and interaction with epoxy matrix could be significantly increased, therefore, the mechanical properties of the nanocomposites were improved greatly. When the TiO₂-PMMA-b-PS content was 1 wt%, the impact strength and flexural strength reached their the best, and increased up to 96% and 43%, respectively. Furthermore, the thermal stability of the nanocomposites was also distinctly improved.     

Synthesis,characterisation and flame,thermal and electrical properties of poly (<Emphasis Type="Italic">n</Emphasis>-butyl methacrylate)/titanium dioxide nanocomposites

Nanocomposites based on poly (n-butyl methacrylate) (PBMA) with various concentrations of titanium dioxide (TiO₂) nanoparticles were synthesised by in situ free radical polymerisation method. The formation of nanocomposite was characterised by FTIR, UV, XRD, DSC, TGA, impedance analyser and flame retardancy measurements. FTIR and UV spectrum ascertained the intermolecular interaction between nanoparticles and the polymer chain. The XRD studies indicated that the amorphous region of PBMA decreased with the increase in content of metal oxide nanoparticles. The SEM revealed the uniform dispersion of nanoparticles in the polymer composite. The DSC and TGA studies showed that the glass transition temperature and thermal stability of the nanocomposites were increased with the increase in the concentration of nanoparticles. The conductivity and dielectric properties of nanocomposites were higher than pure PBMA and the maximum electrical property was observed for the sample with 7 wt% TiO₂. As the concentration of nanoparticles increased above 7 wt%, the electrical property of nanocomposite was decreased owing to the agglomeration of nanoparticles in the polymer. Nanoparticles could impart better flame retardancy to PBMA/TiO₂ composite and the flame resistance of the materials improved with the addition of nanoparticles in the polymer matrix.     

Production and characterization of nanocomposites based on poly(amide-imide) containing 4,4′-methylenebis(3-chloro-2,6-diethylaniline) using nano-TiO2 surface-coupled by 3-aminopropyltriethoxysilane

In this work, the poly(amide-imide) (PAI) was synthesized from the polymerization reaction of 4,4′-methylenebis(3-chloro-2,6-diethyl trimellitimidobenzene) as a diacid with 4,4′-methylenebis(3-chloro-2,6-diethylaniline) under green condition using molten tetra-n-butylammonium bromide and triphenylphosphite. Ultrasonic technique was used for preparation of PAI/TiO₂ nanocomposites (PAI/TiO₂ NCs). For the improvement of TiO₂ nanoparticles (NPs) dispersion and enhancing interactions between NPs and polymeric matrix the surface of TiO₂ was successfully modified by silane coupling agent (3-aminopropyltriethoxysilane). The resulting NCs were characterized by FT-IR, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The TGA of the obtained NCs proves the enhancement in the thermal stability with an increase in the percentage of titania NPs. TEM and FE-SEM images showed that the NPs were uniformly dispersed in the polymer matrix. The shielding effect of nano TiO₂ under UV radiation was examined by UV–vis.     

Effect of neodymium‐doped titanium dioxide nanoparticles on the structural,mechanical, and electrical properties of poly(butyl methacrylate) nanocomposites

Nanocomposites based on neodymium‐doped titanium dioxide (Nd‐TiO₂)/poly(n‐butyl methacrylate) (PBMA) have been prepared by an in situ polymerization of butyl methacrylate monomer with varying concentrations of Nd‐TiO₂ nanoparticles. The resulting nanocomposites have been analyzed by ultraviolet (UV)–Visible spectroscopy, Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and impedance analyzer (TGA). The results of UV and FTIR spectroscopy have indicated the interaction of nanoparticles with the PBMA matrix. Spherically shaped nanoparticles with an average size of 10–25 nm have been revealed in the TEM and their homogeneous dispersion, and interaction of polymer matrix has been confirmed by SEM and XRD studies. The thermal stability and glass transition temperature of the composites were significantly enhanced by the addition of nanoparticles. The AC conductivity and dielectric properties of nanocomposites have been found to be higher than pure PBMA, and the maximum electrical properties have been observed for 7 wt% composite. The reinforcing nature of the nanoparticles in PBMA has been reflected in the improvement in tensile strength measurements. The result indicated that the tensile strength of nanocomposites have greatly enhanced by the addition of Nd‐TiO₂ nanoparticles whereas the elongation at break decreases with the loading of nanofillers. To understand the mechanism of reinforcement, tensile strength values have been correlated with various theoretical modeling. The research has been found to be promising in the development of novel materials with enhanced tensile strength, dielectric constant, and thermal properties, which may find potential applications in energy storage and nanoelectronic devices. J. VINYL ADDIT. TECHNOL., 25:9–18, 2019. © 2018 Society of Plastics Engineers     

Synthesis and dielectric properties of polyaniline/titanium dioxide nanocomposites

Two series of polyaniline–TiO₂ nanocomposite materials were prepared in base form by in situ polymerization of aniline with inorganic fillers using TiO₂ nanoparticles (P25) and TiO₂ colloids (Hombikat), respectively. The effect of particle sizes and contents of TiO₂ materials on their dielectric properties was evaluated. The as-synthesized polyaniline–TiO₂ nanocomposite materials were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR), thermal analysis (DTA/TGA), and X-ray diffraction (XRD). Dielectric properties of polyaniline–TiO₂ nanocomposites in the form of films were measured at 1 KHz–1 MHz and a temperature range of 35–150 °C. Higher dielectric constants and dielectric losses of polyaniline–TiO₂ nanocomposites than those of neat PANI were found. PANI–TiO₂ nanocomposites derived from P25 exhibited higher dielectric constants and losses than those from Hombikat TiO₂ colloids. Electrical conductivity measurements indicate that the conductivity of nanocomposites is increased with TiO₂ content. The dielectric properties and conductivities are considered to be enhanced due to the addition of TiO₂, which might induce the formation of a more efficient network for charge transport in the base polyaniline matrix.     

Synthesis, characterization and enhanced photocatalytic activity of TiO2/SiO2 nanocomposite in an aqueous solution and acrylic-based coatings

In this study, TiO₂/SiO₂ nanocomposites were synthesized via a sol-gel route by adding tetraethylorthosilicate (TEOS) to a solution containing different molar ratios of Degussa P25 TiO₂ nanoparticles. FTIR, TGA, EDAX and XRD techniques were used to characterize the modified nanoparticles. Photocatalytic activity of the nanoparticles in an aqueous solution and into the acrylic based coating was evaluated using colour coordinate data measurements, SEM analysis, gloss measurements and FTIR spectroscopy, in the presence of Rhodamine B (Rh.B) dyestuff, as a pollutant model, before and after exposure to the UVA (340 nm) irradiation and compared to their unmodified counterparts.The results showed that silica grafting effectively reduced the photocatalytic activity of the TiO₂ nanoparticles as evidenced by absorption spectra and colour changes of Rh.B aqueous solutions during the UVA irradiation. The results revealed the effectiveness of sol-gel route for preparation of TiO₂/SiO₂ nanocomposites. The optimum result was obtained with 1% molar ratio of TiO₂:TEOS. Addition of TiO₂/SiO₂ nanocomposites into the acrylic based coating revealed reduction of photo-degradation of Rh.B compared to untreated nanoparticles. Finally, inclusion of TEOS treated TiO₂ nanoparticles into the aqueous organic coatings, provides photocatalytic property and as a result, it can possibly be considered for self-cleaning coatings.     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

Morphology and kinetic mechanism of facile one-step preparing TiO2/polyacrylate/TiO2 multilayer core–shell hybrid emulsion via miniemulsion polymerization

In this paper, we report a facile method for the preparation of TiO₂/polyacrylate/TiO₂ multilayer core–shell hybrid emulsion through polymerization. The chemical compositions of the copolymer were studied with Fourier transform infrared. TEM images reveal that nanocomposites show different core–shell structures with different TiO₂ contents. As the weight percentage of TiO₂ is 2 wt% (based on monomer, same below), there are no TiO₂ cores in some nanocomposites. When TiO₂ increases to 3 wt%, the TiO₂/polymer/TiO₂ multilayer core–shell composite particles are prepared. But the TiO₂ shells disappeared when the TiO₂ content kept increasing. TGA shows that the TiO₂ dispersed in latex films uniformly and the thermal stabilization improved with increasing TiO₂ contents. The effect of operating variables such as polymerization temperature and the concentrations of polymerizable emulsifier, initiator, extremely hydrophilic monomer, modified TiO₂ and HD on the kinetic behaviors was investigated. The formation mechanism of TiO₂/polymer/TiO₂ multilayer core–shell structure was inferred.     

Preparation of polymer/inorganic nanoparticles composites through ultrasonic irradiation

In this paper, ultrasonic induced encapsulating emulsion polymerization was first used to prepare the novel polymer/inorganic nanoparticles composites. The behaviors of several inorganic nanoparticles (SiO₂, Al₂O₃, TiO₂) under ultrasonic irradiation, such as dispersion, crushing, and activation, were studied. The dispersion stability, morphology, and structure of the ultrasonic irradiated nanoparticles were characterized by means of transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and spectrophotometry, respectively. The results show that the inorganic nanoparticles in the aqueous solution can redisperse more effectively by ultrasonic irradiation than by conventional stirring. This is the basis for preparation of polymer/inorganic nanoparticles composites. By this technique, the long‐term stable latex, which mainly consists of polymer/inorganic nanoparticles composite latex particles, were successfully prepared. TEM, FTIR, thermogravimetric analysis, X‐ray photoelectron spectroscopy, spectrophotometry, and element analysis confirmed that well‐dispersed nanoparticles were encapsulated by the formed polymer, and the thickness of encapsulating polymer layer was in the range of 5–65 nm. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1478–1488, 2001     

Preparation and properties of transparent PMMA/ZrO2 nanocomposites using 2-hydroxyethyl methacrylate as a coupling agent

Transparent PMMA/ZrO₂ nanocomposites were prepared by in-situ bulk polymerization of methyl methacrylate (MMA)/ZrO₂ dispersions that were firstly synthesized using nonaqueous synthesized ZrO₂ nanocrystals and the function monomer, 2-hydroxyethyl methacrylate (HEMA), as the ligand. The dispersion behavior of ZrO₂ nanoparticles in MMA, structure, mechanical and thermal properties of the PMMA/ZrO₂ nanocomposites were investigated comprehensively. It was found that ZrO₂ nanoparticles were well dispersed in MMA with HEMA ligand, but the MMA/ZrO₂ dispersions easily destabilized in air as well as at elevated temperatures. The destabilization temperature of the dispersion is raised by increasing the molar ratio of HEMA/ZrO₂ to match the bulk polymerization temperature. The PMMA/ZrO₂ nanocomposites showed an interesting chemical structure (namely, highly cross-linked structure even at ZrO₂ content as low as 0.8 wt% and hydrogen bonding interaction between polymer matrix and ZrO₂ nanoparticles), with enhanced rigidity without loss of the toughness and improved thermal stability. The relationship between the structure and the properties of the PMMA/ZrO₂ nanocomposites based on the HEMA coupling agent was discussed.     

Hybrid composites of conductive polyaniline and nanocrystalline titanium oxide prepared via self-assembling and graft polymerization

After TiO₂ nanoparticles were surface modified, conductive polyaniline (PANI) layer was chemically grafted on the surface of the self-assembled monolayer (SAM) coated TiO₂ nanoparticles, resulting in PANI/SAM-TiO₂ composites. In the preparation process of the hybrid composites, γ-aminopropyltriethoxysilane was used as a coupling agent to form a dense aminopropylsilane monolayer with active sites for the graft polymerization of aniline. The resulted composite nanoparticles were characterized by using TEM, FTIR, TGA, and UV-vis-diffuse reflectance spectroscopy. The thermogravimetric analysis confirmed that the inserted SAM layer improved the thermal stability of the PANI-TiO₂ nanocomposites. Compared with neat-TiO₂ nanoparticles without any surface modification, moreover, the PANI/SAM-TiO₂ nanocomposites showed better photocatalytic activity in photodegradation of methyl orange under sunlight, which was partly attributed to the sensitizing effect of PANI.     

Synthesis and characterization of PMMA/SiO2 organic–inorganic hybrid materials via RAFT‐mediated miniemulsion polymerization

In this article, we first carried out the surface modification of SiO₂ using silane coupling agent KH570, and then prepared PMMA/SiO₂ organic–inorganic hybrid materials by conventional free radical polymerization and RAFT polymerization in miniemulsion, respectively. The kinetics comparisons of these two polymerizations were studied. PMMA/SiO₂ hybrid materials were characterized by gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis. Experimental results indicated that the polymerization behavior of MMA in miniemulsion showed controlled/living radical polymerization characteristics under the control of RAFT agent. Incorporation of RAFT agent and SiO₂ nanoparticles improved the thermal properties of polymers, the thermal stability of polymers increased with increasing content of SiO₂ nanoparticles. The structures and morphologies of SiO₂, modified SiO₂, and PMMA/SiO₂ hybrid materials were characterized by FT‐IR and TEM. TEM results showed that the addition of modified SiO₂ nanoparticles to miniemulsion polymerization system obtained different morphology latex particles. Most of modified SiO₂ nanoparticles were wrapped by polymer matrix after polymerization. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Investigation of surface modification of rutile TiO2 nanoparticles with SiO2/Al2O3 on the properties of polyacrylic composite coating

Surface modification and characterization of TiO₂ nanoparticles as an additive in a polyacrylic clear coating were investigated. For the improvement of nanoparticles dispersion and the decreasing of photocatalytic activity, the surface of nanoparticles was modified with binary SiO₂/Al₂O₃. The surface treatment of TiO₂ nanoparticles was characterized with FTIR. Microstructural analysis was done by AFM. The size, particle size distribution and zeta potential of TiO₂ nanoparticles in water dispersion was measured by DLS method. For the evaluation of particle size and the stability of nanoparticles in water dispersions with higher solid content the electroacoustic spectroscopy was made. To determine the applicability and evaluate the transmittance of the nano-TiO₂ composite coatings UV–VIS spectroscopy in the wavelength range of 200–800 nm was employed. The results showed that surface treatment of TiO₂ nanoparticles with SiO₂/Al₂O₃ improves nanoparticles dispersion and UV protection of the clear polyacrylic composite coating.     

Synthesis of conductive PSt-g-PANi/TiO2 nanocomposites by metal catalyzed and chemical oxidative polymerization

Well-defined polymer-TiO₂ nanocomposites of core–shell structure were prepared by two-steps, surface-initiated atom transfer radical polymerization (ATRP) of styrene and in situ chemical oxidative polymerization of aniline monomers from the surfaces of the TiO₂ nanoparticles. The methods used include the following: initially, the ATRP initiator was covalently attached to the surface of TiO₂ nanoparticles by esterification of 2-bromo-2-methyl propionic acid with hydroxyl group. The metal-catalyzed radical polymerization of styrene with modified TiO₂ nanoparticles was performed using a copper catalyst system to give the TiO₂-based core hybrids linking PSt segments (TiO₂-PSt hybrids). Next, the TiO₂-PSt reacted with HNO₃/H₂SO₄ to produce a nitro group containing polystyrene to form TiO₂-PSt-NO₂, and obtained TiO₂-PSt-NO₂ was treated with hydrochloric acid/SnCl₂, and converted to an amine group containing polystyrene (TiO₂–PSt-NH₂). Finally, surface oxidative graft copolymerization of aniline, using the –NH₂ moieties of TiO₂/PSt-NH₂ as the anchoring sites. Characterization of these well-defined nanocomposites included FTIR, thermogravimetric analysis, transmission electron microscopy, and X-ray diffraction.     

Ferromagnetic polyaniline/TiO2 nanocomposites

Novel ferromagnetic semiconducting polyaniline PANI/TiO₂ nanocomposites were synthesized by the oxidative polymerization of aniline with ammonium peroxydisulfate in an aqueous medium, in the presence of colloidal TiO₂ nanoparticles (d ∼ 4.5 nm), without added acid. The morphological, magnetic, structural, and optical properties of the PANI/TiO₂ nanocomposites prepared at initial aniline/TiO₂ mole ratios 80, 40, and 20 were studied by scanning electron microscopy, superconducting quantum interference device, X‐ray powder diffraction, FTIR, Raman, and UV‐Vis spectroscopies. The emeraldine salt form of linear PANI chains as well as the presence of phenazine units, branched PANI chains, and anatase crystalline structure of TiO₂ in PANI/TiO₂ nanocomposites was confirmed by FTIR and Raman spectroscopies. The electrical conductivity of synthesized composites was ∼10⁻³ S cm⁻¹. The room temperature ferromagnetic response with coercive field of H_c ∼ 300 Oe and the remanent magnetization of M_r ∼ 4.35 × 10⁻⁴ emu/g was detected in all investigated PANI/TiO₂ nanocomposites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Surface modification of Cr2O3 nanoparticles with 3-amino propyl trimethoxy silane (APTMS). Part 1: Studying the mechanical properties of polyurethane/Cr2O3 nanocomposites

The surface of Cr₂O₃ nanoparticles was modified with various amounts of 3-amino propyl trimethoxy silane (APTMS). Thermal gravimetric analysis (TGA), turbidimeter and Fourier transform infrared (FTIR) spectroscopy were utilized in order to investigate APTMS grafting on the nanoparticles. Then, polyurethane nanocomposites were prepared using various loadings of silane modified Cr₂O₃ nanoparticles. The nanoparticles dispersion in the coating matrix was studied by a field emission scanning electron microscopy (FESEM). Dynamic mechanical thermal analysis (DMTA) and tensile test were utilized in order to investigate the mechanical properties of the nanocomposites. Results obtained from FTIR, TGA and turbidimeter measurements revealed that the organic functional groups of the silane were successfully grafted on the surface of the nanoparticles. The mechanical properties of the polyurethane were significantly enhanced using 2 wt% Cr₂O₃ nanoparticles modified with 0.43 g silane/5 g pigment compared with other samples.     

Effect of Tio2 Nanoparticles on the Antibacterial and Physical Properties of Low-Density Polyethylene Film

In this study, TiO₂ nanoparticles were incorporated into low-density polyethylene by melt blending. Morphological properties and dispersion behavior of TiO₂ nanocomposite were characterized through field emission scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectroscopy. Thermal stability of the nanocomposites was determined by thermogravimetric analysis. Moreover, the mechanical properties of nanocomposites were determined. Antimicrobial activity of TiO₂ nanocomposites was investigated by in vitro test. Dispersion of the nanoparticles was good in nanocomposites_. According to thermogravimetric analysis, incorporation of TiO₂ nanoparticles into low-density polyethylene enhanced the thermal stability. Mechanical properties of nanocomposites were improved by TiO₂ nanoparticles. Results showed that the antibacterial effect of low-density polyethylene –TiO₂ nanocomposite was significantly enhanced by TiO₂nanoparticles (p?2 nanoparticles not only can improve the properties of low-density polyethylene but they also have the potential to be used as an active food packaging film.