Synthesis of versatile TIPNO-based alkoxyamines

The versatile chloromethyl TIPNO-based alkoxyamine was efficiently transformed into other valuable functionalised TIPNO-based alkoxyamines such as amino alkoxyamines which are interesting initiators for block copolymers and bisalkoxyamines in good yield and in two steps at the most. One bisalkoxyamine has allowed to prepare well-defined polystyrene-b-poly(n-butyl acrylate)-b-polystyrene symmetrical triblock copolymer. The last representative example of such alkoxyamines is a styrenic alkoxyamine which was copolymerized with styrene to afford branched polystyrene. Finally, for the first time branched poly(n-butyl acrylate) by nitroxide mediated radical polymerization was obtained and was a efficient macroinitiator of styrene, which indicates that the radical polymerization mediated by this styrenic alkoxyamine is living.     

Nitroxide-mediated polymerization of styrene initiated from the surface of fumed silica. Comparison of two synthetic routes

Nitroxide-mediated free radical polymerization of styrene was performed from 13 nm diameter fumed silica in two steps. First, an alkoxyamine, based on N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) nitroxide (DEPN) was covalently attached onto silica. Polystyrene chains with controlled molecular weights and narrow polydispersities were then grown from the alkoxyamine-functionalized nanoparticles surface in the presence of a ‘free’ sacrificial styrylDEPN alkoxyamine. Two strategies were investigated in order to immobilize the alkoxyamine initiator on the silica surface. In a first route, we synthesized a unimolecular alkoxyamine initiator carrying triethoxysilyl end groups reactive towards the silica surface. In a second route, the alkoxylamine was formed in situ by the simultaneous reaction of a polymerizable acryloxy propyl trimethoxysilane (APTMS), azobisisobutyronitrile (AIBN) and DEPN used as radical trap. In both cases, the grafting of both the initiator and the polystyrene chains was characterized and quantified by several techniques which allowed us to evaluate and compare the two strategies.     

SG1-based alkoxyamine bearing a N-succinimidyl ester: A versatile tool for advanced polymer synthesis

This paper reports the preparation of a MAMA-SG1 (BlocBuilder™) derived alkoxyamine bearing a N-succinimidyl (NHS) ester group 1, valuable for functional and advanced polymer synthesis. This alkoxyamine was exploited following two strategies: (i) a post-functionalization approach based on the transformation of α-NHS chain ends of polymers previously obtained by nitroxide mediated polymerization (NMP) from 1 (path A) and (ii) a pre-functionalization approach based on the functionalization of alkoxyamine 1 prior to NMP (path B). Path A was demonstrated by derivatization of α-NHS functionalized polystyrenes with ethanolamine, yielding hydroxyl-functionalized polystyrenes. Path B was illustrated by two examples: first, a OH functional alkoxyamine initiator, prepared by reaction of 1 with ethanolamine, was used for the synthesis of polystyrene-b-poly(d,l-lactide) by combining NMP and ring-opening polymerization. Secondly, a poly(propylene oxide)-SG1 macroalkoxyamine, obtained from reaction of 1 with NH₂-functionalized poly(propylene oxide), was used as a macroinitiator for NMP of styrene to obtain a PS-b-PPO block copolymer.     

First nitroxide-mediated free radical dispersion polymerizations of styrene in supercritical carbon dioxide

Controlled/living character has been demonstrated for the first time in nitroxide-mediated free radical dispersion polymerizations in supercritical carbon dioxide. Styrene was polymerized in the presence of N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) nitroxide (SG1) at 110 °C. Stabilization was achieved using the inistab concept (initiator+stabilizer), employing a poly(dimethylsiloxane) (PDMS) based azo initiator as well as a polymeric alkoxyamine macroinitiator with the expected structure SG1-polystyrene-PDMS-polystyrene-SG1. In the presence of sufficient amounts of the inistab, the polymerizations proceeded to high conversion to yield the polymeric product as a powder. Control was indicated by the number-average molecular weights increasing linearly with conversion in reasonable agreement with the theoretical values. Although the molecular weight distributions were broad in many cases, chain extensions in bulk and solution using styrene indicated high degrees of ‘living’ character.     

Synthesis and characterization of polystyrene-b-tetraaniline stars from polystyrene stars with surface reactive groups prepared via ATRP

Functionalized star polymers with tetraaniline on their surface have been successfully prepared by substitution reaction of N-succinimidyl-terminated star polymers with tetraaniline. A novel functional initiator bearing N-succinimidyl group was used in atom transfer radical polymerization (ATRP) of styrene, and polystyrenes (PSts) having N-succinimidyl groups with narrow molecular weight distribution were obtained. The star polymers with reactive N-succinimidyl groups on their surface were synthesized by ATRP of divinylbenzene (DVB). The N-succinimidyl-terminated PSt, polymer stars with surface N-succinimidyl groups and the PSt-b-tetraaniline stars were characterized by ¹H NMR spectroscopy, FT-IR and gel permeation chromatography.     

Surface-initiated nitroxide-mediated radical polymerization of 2-(dimethylamino)ethyl acrylate on polymeric microspheres

2-(Dimethylamino)ethyl acrylate (DMAEA) was grafted from the surface of alkoxyamine-functionalized crosslinked poly(styrene-co-chloromethylstyrene) microspheres by nitroxide-mediated radical polymerization (NMRP). Latex particles (∼60 nm diameter) bearing chloromethyl groups were synthesized by emulsion polymerization. N-tert-butyl-N-(1-diethyl phosphono-2,2-dimethylpropyl)nitroxide (SG1) was then immobilized on the particle surface. Microspheres grafted with the homopolymer pDMAEA, as well as block copolymers poly(styrene-b-DMAEA) and poly(butyl acrylate-b-DMAEA) were prepared by surface-initiated NMRP in N,N-dimethylformamide at 112 °C, with the addition of free SG1 to ensure that control is maintained. Particle size increases with number average molecular weight (M_n) of untethered polymers. The polymerizations exhibit linear first order kinetic plots and slight curvature of evolution of M_n with conversion. The functional microspheres were analyzed by infrared spectroscopy, transmission electron microscopy and thermal analysis, as well as their dispersibility in water; the results support the formation of surface-grafted pDMAEA on the microspheres.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Synthesis and reactivity of functionalized alkoxyamine initiators for nitroxide‐mediated radical polymerization of styrene

The synthesis and examination of different functionalized (2,2,6,6‐tetramethyl‐1‐piperidinyloxy free radical) TEMPO‐containing alkoxyamine initiators for nitroxide‐mediated radical polymerization of styrene are reported. Initiators with ester and carbonate functional groups were synthesized by a low‐temperature radical‐abstraction reaction of the functionalized ethylbenzene in the presence of TEMPO to introduce the functional groups onto the initiating chain‐end of polystyrene. An initiator with two alkoxyamine groups symmetrically located at each end of a carbonate bond was also synthesized and used for nitroxide‐mediated styrene polymerization. Styrene polymerization using these initiators followed first‐order kinetics up to approximately 60 min at 140 °C or 30% monomer conversion. Alkoxyamines bearing an acetoxy or tert‐butylcarbonate group at the p‐position of 1‐(2,2,6,6‐tetramethyl‐1‐piperidinyloxy)ethylbenzene behave in a similar way to the unfunctionalized initiator. With an initiator containing two alkoxyamine groups, the resulting polymer molecular weight was twice that of the polymer obtained from initiators with only one alkoxyamine group, as expected from propagation from both chain‐ends. Upon hydrolysis of the carbonate bond, it was revealed that equivalent polymer chain growth occurred from each alkoxyamine site in the difunctional initiator. Copyright © 2003 Society of Chemical Industry     

Kinetics of nitroxide-controlled radical polymerization during the non-stationary state

The activation-deactivation equilibrium of nitroxide-controlled radical polymerization of styrene at 123 °C was investigated. For this purpose the reaction solution was examined time dependently during the initial phase of the polymerization by using an SEC column combination providing a very good separation of the low-molecular weight species. By time-dependent measurement of the alkoxyamine concentration the activation rate of the alkoxyamines PhEt-TIPNO (N-tert-butyl-N-(2-methyl-1-phenyl-propyl)-O-(1-phenyl-ethyl)-hydroxylamine) k_act = 3.2 × 10⁻³ s⁻¹ and PhEt-BIPNO (N-tert-butyl-N-(1-isopropyl-2-methyl-propyl)-O-(1-phenyl-ethyl)-hydroxylamine) k_act = 6.4 × 10⁻³ s⁻¹ can be determined directly.Considering the Persistent Radical Effect theory, the measurement of the free nitroxide concentration allows to determine the pseudo-equilibrium constant of dissociation/combination between dormant and active species for polystyryl-TIPNO and polystyryl-BIPNO, K = 7.5 × 10⁻⁹ mol/L and 1.08 × 10⁻⁸ mol/L, respectively.     

Preparation and characterization of novel grafted polyethylene based azo-polymers bearing oligo(ethylene glycol) spacers

Novel grafted azo-polymers were prepared from commercial low density polyethylene plates (PE). First, precursor polymers were synthesized by reacting PE in the presence of acryloyl chloride using gamma radiation. Further esterification of the resulting grafted polymers with four new amino-nitro substituted azobenzene derivatives bearing oligo(ethylene glycol) segments: N-methyl-N-{4-[(E)-(4-nitrophenyl)diazenyl]phenyl}-N-(5-hydroxy-3-oxapentas-1-yl)amine (RED-PEG-2), N-methyl-N-{4-[(E)-(4-nitrophenyl)diazenyl]phenyl}-N-(8-hydroxy-3,6-dioxaoctas-1-yl)amine (RED-PEG-3), N-methyl-N-{4-[(E)-(4-nitrophenyl)diazenyl]phenyl}-N-(11-hydroxy-3,6,9-trioxaundecas-1-yl)amine (RED-PEG-4) and N-methyl-N-{4-[(E)-(4-nitrophenyl)diazenyl]phenyl}-N-(17-hydroxy-3,6,9,12,15-pentaoxaheptadecas-1-yl)amine (RED-PEG-6) led to the formation of branched azo-polymers. These polymers were characterized and their thermal and optical properties were studied. Besides, the influence of the irradiation dose, irradiation time and the structure of the dyes on the properties of the obtained polymers are discussed.     

Facile preparation of bimodal polyethylene with tunable molecular weight distribution from ethylene polymerization catalyzed by binary catalytic system in the presence of diethyl zinc

A series of novel honeycomb films of tri- and octa-arm polystyrene-b-poly(tert-butyl acrylate) star polymers prepared by atom transfer radical polymerization and nitroxide mediated radical polymerization, respectively, have been fabricated. The type of solvents, specifically their miscibility in water is one of essential parameters to construct ordered pore structures. The tri- and octa-arm star polymers yield well-ordered microporous film specifically in 10 to 30 g/L CHCl₃ solution. The contact angle of glass slide substrate (54.57°) is adjusted to 41.06° by plasma treatment and to 12.21° by coating the glass slide with highly hydrophilic hyperbranched polyglycidol. The ordered honeycomb films are created on the hydrophobic substrates, but the ordered films are not formed on the hydrophilic substrates. Microspheres with the diameters ranging from hundreds of nanometers to several micrometers are also obtained by a slight modification of breath figure method.     

Star polymers via atom transfer radical polymerization from adamantane-based cores

A series of novel multifunctional initiators derived from adamantane-based derivatives have been used in the syntheses of various styrenic and (meth)acrylic star polymers by atom transfer radical polymerization (ATRP). Conditions were identified in each system to produce star polymers with nearly monomodal molecular distributions. These synthesized star polymers have glass transition temperatures similar to those known for high-molecular-weight linear polymers. We obtained a series of adamantane-contained star polymers covering a wide range of molecular weights by adjusting the monomer-to-initiator ratio and the solvent polarity. Because of reaction heterogeneity and inevitable termination processes, the occurrence of star-star coupling led to a lower than predicted molecular weight polydispersity. When hydrolyzed from their cores by NaOH, the values of M_w of the arms of the PMMA star polymer did not change with reaction time, at least for the first 48 h of the reaction, which implies that no significant PMMA hydrolysis occurs within this interval of time.     

Organic/inorganic hybrid composites prepared by polymerization compounding and controlled free radical polymerization

A new method to produce highly filled and well dispersed polymer solid composites using controlled free radical polymerization has been developed. Grafting of polymers onto ultrafine silica was done in bulk polymerization at 120 °C in presence of N-tert-butyl-1-diethylphosphono2,2-dimethyl propyl nitroxide (DEPN) as a nitroxide stable free radical. Optimum conditions for tert-butyl hydroperoxide grafting onto fumed silica were first determined. The percentage of grafting, the architecture of grafted polymers, the length of chains, and the polydispersity index can be controlled at will using this approach. The effect of the number of grafted polymer chains combined with its molecular weight on the processing of these materials was investigated. The syntheses performed in this work gave grafting percentages of polymers and copolymers ranging from 12 to 88 wt%. All ‘synthesized’ composites gave stable suspensions in toluene and tetrahydrofuran.     

Reversible cross-linking reactions of alkoxyamine-appended polymers under bulk conditions for transition between flow and rubber-like states

Reversible cross-linking reactions of alkoxyamine-appended polymers with low glass transition temperature (T_g) were successfully carried out under bulk conditions. The low-T_g polymers with alkoxyamine units in the side chains were synthesised by radical copolymerisation of 2-ethylhexyl acrylate and two kinds of alkoxyamine-containing acrylate monomers. By heating the low-T_g polymers under bulk conditions at 100 °C, cross-linked polymers were formed by radical exchange reactions between alkoxyamine units, and a transition from a liquid-like flowable polymer state to a rubber-like polymer state was confirmed. A de-cross-linking reaction was also accomplished by radical exchange reactions between the cross-linked polymers and an added alkoxyamine-containing small molecule or stable nitroxyl radical, which resulted in transition to the flowable state again. The structural transition between low-T_g linear polymers and cross-linked polymers were characterised by ¹H and ¹³C NMR spectroscopy, Fourier transform infrared spectroscopy, rheology measurement, swelling experiment, and gel permeation chromatography measurement.     

Nitroxide-mediated radical polymerization of styrene: Experimental evidence of chain transfer to monomer

Chain transfer to monomer during nitroxide-mediated radical polymerization of styrene has been investigated for 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) and N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) nitroxide (SG1) mediated polymerizations at 125 and 110 °C, respectively. A novel technique employing a fluorescence-labelled polystyrene-TEMPO macroinitiator enabled separate detection of the total chain distribution and the distribution of chains containing the original macroinitiator, thus directly confirming the presence of chains not containing macroinitiator. Chain transfer to monomer results in a low molecular weight tail, which can be very much pronounced, in particular in the number distributions. Quantitative analysis of the total number of chains in both the TEMPO and the SG1 systems, correcting for the contribution of thermal initiation of styrene, yielded chain transfer to monomer constants in agreement with the literature.     

Synthesis of complex architectures of comb block copolymers

The synthesis of comb block copolymers by ring opening metathesis polymerization (ROMP), ring opening polymerization (ROP), and atom transfer radical polymerization (ATRP) is described. Block copolymers were synthesized by the ROMP of oxanorbornene and norbornene monomers followed by hydrogenation of the olefins along the backbone. One block of these diblock copolymers possessed initiators either for the ROP of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione or the ATRP of butyl acrylate. The synthesis and characterization of comb polymers with arms composed of poly(lactic acid) and poly(butyl acrylate) are described. These polymers had well-defined peaks in the size exclusion chromatography spectra which indicated that no homopolymers were synthesized. A comb block copolymer with polymeric arms of poly(styrene-b-vinylpyridine) is described. Vinylpyridine was polymerized from a comb polymer with poly(styrene) arms by ATRP at high dilution of the comb polymer.     

Application of a new unimolecular initiator in the synthesis of (α,ω) ketone functionalized polystyrene in nitroxide mediated polymerization

The ketone functionalized N‐alkoxyamine, a derivative of 4‐oxo‐2,2,6,6‐tetramethylpiperidin‐1‐oxyl (4‐oxo‐TEMPO) was synthesized and applied as an initiator in the nitroxide mediated polymerization of styrene in bulk at 120°C. In the presence of the prepared initiator: 1‐phenyl‐1‐(4‐oxo‐2,2,6,6‐tetramethylpiperidinoxy)propanone polymers with well‐defined molecular weight were obtained. By contrast, when an accelerator such as acetic anhydride (10%) was added to the system, lower control of polymerization was observed. Additionally, the functionality of polymers was evaluated on the basis of a quantitative investigation of UV–visible spectra of 2,4‐dinitrophenylhydrazone formed from the polymers and the synthesized initiator. The UV–vis spectra of the hydrazone derivatives obtained from polymers by means of 2,4‐dinitrophenylhydrazone made it possible to confirm that the polymers prepared in the presence of the ketone functionalized N‐alkoxyamine retain the ketone functionality on the polymer chain. The functionality for the obtained polymers exceeded 1 significantly. The obtained (α, ω) telechelic polymers are of great importance in the synthesis of new biohybrid materials such as bioconjugates with proteins or peptides as well as new polymer nanostructures. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A novel amphiphilic AB2 star copolymer synthesized by the combination of ring-opening metathesis polymerization and atom transfer radical polymerization

A new amphiphilic AB₂ star copolymer was synthesized by the combination of ring-opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP). Two different routes (methods A and B) were employed firstly to prepare the poly(oxanorbornene)-based monotelechelic polymers as the hydrophobic arm bearing dibromo-ended group via ROMP in the presence of two different terminating agents catalyzed by first generation Grubbs catalyst. The values of capping efficiency (CE) of the polymers were determined by NMR, which were 94% and 67% for methods A and B, respectively. Then, the dibromo-ended ROMP polymers were used as the macroinitiators for ATRP of 2-(dimethylamino)ethyl methacrylate (DMAEMA) to produce two hydrophilic arms. The prepared amphiphilic AB₂ star copolymers poly(7-oxanorborn-5-ene-exo,exo-2,3-dicarboxylic acid dimethyl ester)-block-bis[poly(2-(dimethylamino)ethyl methacrylate)] (PONBDM_n-b-(PDMAEMA_m)₂) with a fixed chain length of hydrophobic PONBDM and various hydrophilic PDMAEMA chain lengths can self-assemble spontaneously in water to form polymeric micelles, which were characterized by dynamic light scattering, atom force microscopy, and transmission electron microscopy measurements.     

Synthesis, characterization and self-assembly behavior of six-armed star block copolymers with triphenylene core

Hexa-armed star block copolymers, s-[poly(l-lactide)-b-poly(styrene-co-N-acryloxysuccinimide)]₆ (s-[PLLA-b-poly(St-co-NAS)]₆) with triphenylene core have been successively prepared by the combination of ring-opening polymerization and atom transfer radical copolymerization, and they were used in the self-assembly in tetrahydrofuran, and the micelles with triphenylene core and PLLA as inner layer as well as poly(St-co-NAS) as shell were formed. After shell was cross-linked, PLLA was hydrolyzed in aqueous NaOH solution, the hollow spheres were formed. The structures, molecular weight and polydispersity index of the polymers were characterized by their ¹H NMR and FT-IR spectra, as well as GPC. Their morphologies were studied by TEM. The influence factors on the formation of various morphologies are under investigation.     

Syntheses of AB2 3- and AB4 5-miktoarm star copolymers by combination of the anionic ring-opening polymerization of hexamethylcyclotrisiloxane and nitroxide-mediated radical polymerization of styrene

AB₂ 3- and AB₄ 5-miktoarm star copolymers were prepared by combination of the anionic ring-opening polymerization (AROP) of hexamethylcyclotrisiloxane (D₃) and the TEMPO-mediated radical polymerization of styrene (St). Initially, two kinds of dendritic multifunctional initiators were prepared. One has a 4-bromobutoxy group and two TEMPO-based alkoxyamines and the other has a 4-bromobutoxy group and four TEMPO-based alkoxyamines. Treatment of the multifunctional initiators with tert-butyllithium gave the corresponding lithiobutoxy derivatives, and AROP of D₃ by the lithiobutoxy derivatives gave poly(D₃) with M_w/M_n of 1.07-1.12. Nitroxide-mediated radical polymerization of St by the poly(D₃)s at 120 °C gave AB₂ 3- and AB₄ 5-miktoarm star copolymers with M_w/M_n of 1.15-1.28. Their structures were analyzed by means of ¹H NMR and SEC measurements.