模板剂碳链长度对MCM-41晶体结构的影响

The mesoporous molecular sieve （MCM）-41 using ionic liquid as template has been prepared. The typical template of ionic liquid was [C16mim]X. In this article, the use of 1-alkyl-3-methylimidazolium （[Cnmim]Br, where n= 12,14,16,18,20） salts as templates in the synthesis of MCM-41 is reported. The results showed that the synthesized MCM-41 had uniform pore diameter, high surface area and stable framework. The largest surface area of MCM-41 was the one prepared with [C14mim]Br as template. When using [C18min]Br as template, the narrowest pore distribution sample was obtained and the effect of surface tension of template solution to MCM-41 was first discussed.     

Removal of Cd（II） by Nanometer AIO（OH） Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

A new nanometer material, nanometer AlO（OH） loaded on the fiberglass with activated carbon fibers felt（ACF） as the carrier, was prepared by hydrolytic reaction for the removal of Cd（II） from aqueous solution using column adsorption experiment. As was confirmed by XRD determination, the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO（OH）. SEM images showed that AlO（OH） particles were in the form of small aggregated clusters. The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd（II） adsorption on the new adsorbent. The results showed that the maximum adsorption capacity of Cd（II） was 128.50 mg·g^-1 and 117.86 mg·g^-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g, respectively. The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L^-1 HCl solution. Adsorption-desorption cycles showed the feasibility of repealed uses of the composited material. The adsorption capacities were influenced by pH and the initial Cd（II） concentration. The amount adsorbed was greatest at pH 6.5 and the initial Cd（II） concentration of 0.07 mg·L^-1, respectively. Nanometer AlO（OH） played a major role in the adsorption process, whereas the fiberglass and ACF were assistants in the process of removing Cd（II）. In addition, the adsorption capacities for Cd（II） were obviously reduced from 128.50 mg·L^-1 to 64.28 mg·L^-1 when Pb ions were present because Pb ions took up more adsorption sites.     

铈盐引发高吸附量氨基化PGMA高分子微球合成及去除废水中Cr(VI)(英文)

A novel polyglycidylmethacrylate(PGMA) microspheres with high adsorption capacity of Cr(VI) was prepared by cerium(IV) initiated graft polymerization of tentacle-type polymer chains with amino group on polymer microspheres with hydroxyl groups.The micron-sized PGMA microspheres were prepared by a dispersion polym-erization method and subsequently modified by ring-opening reaction to introduce functional hydroxyl groups.The polymer microspheres were characterized by scanning electron microscopy(SEM) and Fourier transform infrared spectroscopy(FTIR).The results indicated that the polymer microspheres had an average diameter of 5 μm with uniform size distribution.The free amino group content was determined to be 5.13 mmol?g?1 for g-PGMA-NH2 mi-crospheres by potentiometric and conductometric titration methods.The Cr(VI) adsorption results indicated that the graft polymerization of tentacle-type polymer chains on the polymer microspheres could produce adsorbents with high adsorption capacity(500 mg?g?1).The polymer microspheres with grafted tentacle polymer chains have poten-tial application in large-scale removal of Cr(VI) in aqueous solution.     

Extraction Equilibria of Trimellitic and [ 1,1′-Biphenyl]-2,2′-dicarboxylic Acid with 1-Octanol, 50%TBP,and 10%TRPO in Kerosene

To explore the feasibility of extracting aromatic acid products from oxidizing coal, two aromatic acids, trimellitic and [1,1′-biphenyl]-2,2′-dicarboxylic acid, were selected as the solutes, and the extraction equilibrium of the acids were studied with 1-octanol, 50% tributyl phosphate （TBP） in kerosene, and 10% trialkylphosphine oxide （TRPO） in kerosene. The results showed that the degree of extraction of [1,1′-biphenyl]-2,2′-dicarboxylic acid was larger than that of trimellitic acid for all of the solvent, and the extraction capacity with TRPO is more effective than the one with TBP. The extraction behavior of aromatic polyacid is different from that of carboxylic acid, and the reactive extraction function of aromatic acids with TBP and TRPO is not as effective as that of carboxylic acid. 1-octanol could be used to remove [1,1′-biphenyl]-2,2′-dicarboxylic acid from the mixture of trimellitic acid and [1,1′-biphenyl]-2,2′-dicarboxylic acid. Because the weak hydrogen bond association exists between -OH in 1-octanol and -COOH in aromatic acid, the extractive selectivity of [ 1, 1′-biphenyl]-2,2′-dicarboxylic to trimellitic acid depends on the stoichiometric ratio.     

La(III) Transport in Dispersion Supported Liquid Membrane Including PC-88A as the Carrier and HCl Solution as the Stripping Solution

The transport of La(III) through a dispersion supported liquid membrane with polyvinylidene fluoride membrane as the liquid membrane support and dispersion solution including HCl solution as the stripping solution and 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) in kerosene as the membrane solution, was studied. As a result, the optimum transport conditions of La(III) were obtained as that concentration of HCl solution was 4.0 mol/L, concentration of PC-88A 0.16 mol/L, and volume ratio of membrane to stripping solution 30:30 in the dispersion phase, and pH value 4.0 in the feed phase. Ionic strength had no obvious effect on the transport of La(III). Under the optimum conditions, when initial concentration of La(III) was 0.8′10-4 mol/L, the transport rate was up to 96.3% during the transport time of 125 min. The kinetic equation was developed based on the law of mass diffusion and theory of interface chemistry. The diffusion coefficient of La(III) in the membrane and the thickness of diffusion layer between feed and membrane phases were obtained as 3.20′10-7 m2/s and 3.22′10-5 m, respectively. The calculated results were in good agreement with experimental results.     

用多粒模型模拟丁二烯气相聚合的颗粒增长

Gas phase polymerization of butadiene by neodymium catalyst was modeled. The effects of mass and heat transfer resistances in the external boundary layer and within particles, sorption of butadiene in polybutadiene,and deactivation of active sites on polymer particle growth and morphology were studied. Simulation results show that the effects of intraparticle mass and heat transfer resistances on the growth rate of polymer particles are insignificant, and that there is no significant effect of mass transfer resistance on the morphology of polymer particles.The simulation results were compared with the experimental results.     

Investigation of Three-liquid-phase Extraction Systems for Simultaneous Separation of Emodin and Rhein

Several three-liquid-phase extraction systems comprised of organic extractant,polymer and salt aqueous solution were applied to isolate and purify simulated herbal extract containing emodin and rhein.Some influential factors on the partitioning behaviors were studied.The results revealed that extractant type and solution pH value were crucial factors for improving the separation performance.The optimal separation results were obtained at pH 8.00 with methyl isobutyl ketone as the extractant,10%（ω） polyethylene glycol with the molecular weight 4000 Da,and 10%（ω） ammonium sulphate.Under the optimized conditions,95%emodin and 97%rhein were simultaneously extracted into the organic phase and polymer-rich phase from simulated herbal solution with the initial concentration of 100×l0^-6（ω）,respectively,and their separation factor of over 10000 was achieved.By adjusting pH value,back extraction rate of both emodin and rhein could be up to about 99%.With the assistance of molecular simulation program XLOGP3 and molecular orbital package,the possible mechanism of extraction was analyzed,and hydrophobic interaction and hydrogen-bonding interaction might be the major driving forces affecting the partitioning behaviors of emodin and rhein.     

疏水缔合聚合物的合成及溶液性质研究

Acrylamide/2-acrylamido alkane sulfonic acid hydrophobic associating copolymers were synthesized by micellar copolymerization. Effects of hydrophobe content, polymer concentration, salinity and surfactant on rheological behavior of copolymers were investigated and the conformation of polymers in solution was studied by means of environmental scanning electronic microscopy and dynamic light scattering. The experimental results showed that in the dilute regime the hydrophobic parts could interact intramolecularly, while in the regime where the polymer concentration was higher than the critical association concentration, intermolecular hydrophobic association became predominant. Within the limit of the solubility, the critical association concentration of the polymer decreased with the increase of the salinity. The experimental results of the solution conformation indicated the presence of the three-dimensional network structure in deionized water and the size of the mesh in the network varied with the polymer concentration. In NaG1 solution, above the critical association concentration, an increase in polymer concentration enhanced the intermolecular association and also enlarged the hydrodynamic radius. It would result in the imorovement of the thickening power of polvmers.     

高Al_(13)含量聚合氯化铝制备γ-Al_2O_3及表征(英文)

In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characterized by energy dispersive X-ray spectroscopy(EDX) ,X-ray diffraction,transmission electron microscope(TEM) and nuclear magnetic resonance(NMR) analyses.The effects of alkaline solution and calcination temperature were investigated.The results showed that alkaline solution including NH3·H2O and NaOH had little effect on the alumina sample formation.The impurities of NH4Cl and NaCl in solution can be removed through repeated washing by EDX analysis.Calcination temperature had a significant effect on alumina crystal phase.The alumina sample can transform completely toγ-Al2O3 in the subsequent heating from 600°C to 800°C.It is very interesting that Al13 can be existed inγ-Al2O3 phase even after calcinations.The results indicate that polyaluminum chloride with high Al13 content is an effective material to prepareγ-Al2O3.     

Peanut Shell Activated Carbon： Characterization,Surface Modification and Adsorption of Pb^2＋ from Aqueous Solution

Metal ion contamination of drinking water and waste water, especially with heavy metal ion such as lead, is a serious and ongoing problem. In this work, activated carbon prepared from peanut shell （PAC） was used for the removal of Pb^2＋ from aqueous solution. The impacts of the Pb25 adsorption capacities of the acid-modified carbons oxidized with HNO3 were also investigated. The surface functional groups of PAC were confirmed by Fourier transform infrared （FTIR） spectroscopy, X-ray photoelectron spectroscopy （XPS）, Boehm titration. The textural properties （surface area, total pore volume） were evaluated from the nitrogen adsorption isotherm at 77 K. The experimental results presented indicated that the adsorption data fitted better with the Langmuir adsorption model. A comparative study with a commercial granular activated carbon （GAC） showed that PAC was 10.3 times more efficient compared to GAC based on Langmuir maximum adsorption capacity. Further analysis results by the Langmuir equation showed that HNO3 [20% （by mass）] modified PAC has larger adsorption capacity of Pb^2＋ from aqueous solution （as much as 35.5 mg·g^-1）. The adsorption capacity enhancement ascribed to pore widening, increased cation-exchange capacity by oxygen groups, and the promoted hydrophilicity of the carbon surface.     

Molecularly imprinted polymers synthesized via semi-covalent imprinting with sacrificial spacer for imprinting phenols

Semi-covalent imprinting with carbonyl group as sacrificial spacer was employed to synthesize molecularly imprinted polymer (MIP) for phenols. A series of semi-covalently imprinted polymers were prepared by varying the templates and porogens. The MIP with 4-chlorophenyl (4-vinyl)phenyl carbonate as template was proved to be the best one, with ethylene glycol dimethacrylate (EGDMA) as cross-linker, 2,2-azobisisobutyronitrile(AIBN), and chloroform as initiator and porogen, respectively. Under such conditions, the corresponding non-covalently imprinted polymer was fabricated with 4-chlorophenol (4-CP) as template and 4-vinylpyridine (4-VP) as functional monomer. The polymer prepared by semi-covalent imprinting displayed superior selectivity to the non-covalently imprinted polymer for phenols. The peak broadening and tailing had been largely reduced on the column packed with semi-covalently imprinted polymer. Meanwhile, the constant retention for these phenols and the good linearity for phenol and 4-CP augured that the semi-covalently imprinted polymer had the potential application as stationary phase for quantitative determination of phenols.     

沉淀聚合法制备磺胺二甲嘧啶分子印迹聚合物

以磺胺二甲嘧啶为模板分子,采用沉淀聚合法制备了分子印迹聚合物,并对其选择性和吸附性能进行了研究.等温静态平衡实验结果表明,该印迹聚合物与相应的空白聚合物相比具有高的选择性和亲和性;Scatchard模型分析结果表明,该印迹聚合物对印迹分子存在一种均匀的结合位点,最大表观结合量为31.866 mg/g.     

红霉素分子印迹聚合物纳米微球的制备及其吸附特性

以红霉素为模板分子、甲基丙烯酸为功能单体、乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了粒径均一的红霉素纳米分子印迹聚合物微球,优化了分子印迹聚合物的合成条件,确定了模板分子与功能单体的最佳摩尔比为1:3,对其进行了表征. 结果表明,所制聚合物对红霉素的实际最大吸附量可达202.12 mg/g,吸附约200 min达到平衡,对红霉素具有良好的选择性吸附能力.     

沉淀聚合法制备对氨基苯甲酸印迹聚合物及其表征

以对氨基苯甲酸为模板分子,采用沉淀聚合法制备了分子印迹聚合物微球,优化了聚合反应条件,静态平衡吸附实验结果表明,该微球对模板分子存在一种均匀的结合位点,最大表观结合量为49.298μmol/g。应用此微球制备的色谱填充柱能够分离对氨基苯甲酸及其位置异构体邻氨基苯甲酸,分离度为1.42。     

Composite Microfiltration Membranes Imprinted with cAMP

Composite microfiltration membranes covered with a thin layer of molecularly imprinted polymer (MIP) selective to adenosine 3′:5′‐cyclic monophosphate (cAMP) were obtained and their separation properties were studied. MIP layers were prepared using photoinitiated copolymerization of dimethylaminoethyl methacrylate (DMAEM) as a functional monomer and trimethylopropane trimethacrylate (TRIM) as a crosslinker in the presence of cAMP as template in ethanol/water mixture. Blank membranes were prepared under the same conditions, but without cAMP. It was found out that pH of aqueous solution of the template has an effect on the binding of cAMP with MIP membranes. It was concluded that the ability of MIP membranes to bind cAMP is a result of both ionic interactions between charged dimethylamino groups of polymer matrix and the phosphorous residue of cAMP molecule and the specific shape of recognizing sites. These sites are complementary to cAMP in terms of three dimensional shape as well as correct position of functional groups involved in the template binding. This paper shows that the binding capability of MIP membranes can be adjusted by varying the values of degree of modification (DM). Atomic Force Microscopy (AFM) and Scanning Force Microscopy (SEM) were used to visualise surfaces and cross sections of membranes to gain better understanding in the analysis of MIP layer deposited on membranes.     

Adsorption isotherms of caffeine on molecular imprinted polymer

A molecular imprinted polymer (MIP) using caffeine as the template and methacrylic acid (MAA) as the functional monomer was prepared. Acetonitrile was used as the porogen with ethylene glycol dimethacrylate (EGDMA) as the crosslinker and 2,2′-azobis(isobutyronitrile) (AIBN) as the initiator. By a linear and nonlinear regression analysis, the experimental parameters in the equilibrium isotherms were estimated. Then, the linear and quadratic equations for concentration and sorbents to adsorption amounts were expressed, and the adsorption equilibrium data were also correlated into the Freundlich isotherm model. Comparisons of caffeine adsorption isotherm on C₁₈ particles as well as the molecular imprinted polymer were made. The results showed that the caffeine-imprinted polymer showed extraordinarily higher adsorption ability than C₁₈ particles.     

Computer simulation and synthesis of stimuli‐responsive polymer by sol‐gel for selective recognition of (4‐chloro‐2‐methylphenoxy)acetic acid

A novel photoresponsive functional monomer bearing a siloxane polymerizable group and azobenzene moieties was synthesized, and then photoresponsive molecularly imprinted sol‐gel polymers were successfully fabricated from the synthesized functional monomer, using (4‐chloro‐2‐methylphenoxy)acetic acid (MCPA) as a molecular template. The photoisomerization properties of the functional monomer are retained after incorporation into the rigid three‐dimensional crosslinked polymer matrix. The template is then removed from the resulting polymer to generate pores, which are complementary to the template in shape, size and functionality. The substrate affinity of the molecularly imprinted polymer (MIP) receptor sites is photoswitchable. This can be attributed to the photoisomerization of azobenzene chromophores within the MIP receptors, resulting in alteration of their geometry and the spatial arrangement of their binding functionalities. The binding affinity of the imprinted recognition sites was switchable by alternate irradiation with UV and visible light, suggesting that azobenzene groups located inside the binding sites could be used as chemical sensors and the trans–cis isomerization could regulate the affinity for MCPA. To study the hydrogen bond interactions between template molecules and functional monomer, computational molecular modeling was employed. The data indicate that the design of the MIP is rational. Copyright © 2012 Society of Chemical Industry     

Preparation and evaluation of a molecularly imprinted polymer for tolazoline

A uniformly sized molecularly imprinted polymer for the peripheral vasodilator drug tolazoline (T‐MIP) was prepared, and a nonimprinted polymer (NIP) was also synthesized in the same way but in the absence of the template. The T‐MIP was prepared with methylacrylic acid as functional monomer and ethylene glycol dimethacrylate as crosslinker by a multistep swelling and polymerization method. These imprinted materials were characterized by scanning electron microscopy, nitrogen adsorption, and static adsorption experiments. Binding studies were also performed to evaluate the uptake of T‐MIP and NIP with the results that T‐MIP had a significantly higher binding capacity for tolazoline (T) than did NIP. The maximum static adsorption capacities of T‐MIP and NIP for T were 78.9 and 38.8 μmol/g, respectively. The T‐MIPs and NIPs were used as stationary phases of solid‐phase extraction (SPE), and a relative selectivity coefficient (k′) value of 5.21 was obtained, which showed that the T‐MIP sorbent had higher selectivity than the NIP sorbent. The method was applied to the determination of T in urine samples. The prepared polymer sorbent showed promise for SPE for gas chromatography determination of T in urine samples. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

N-水杨酰苯胺分子印迹聚合物的制备及识别性能研究

采用分子印迹技术,以N-水杨酰苯胺为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,在甲醇溶液中制备了N-水杨酰苯胺分子印迹聚合物。用平衡吸附及高效液相色谱的方法对聚合物进行了评价,结果表明印迹聚合物对N-水杨酰苯胺有较强的亲和性和良好的选择性。     

分子印迹聚合物结合点的选择性修饰

以槲皮素为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,制备了分子印迹聚合物(MIP),并以重氮甲烷为修饰剂,对MIP的结合点进行了选择性修饰,探讨了模板分子浓度、溶剂及重氮甲烷用量等对修饰效果的影响。结果表明,选择性修饰能明显提高MIP的识别能力与吸附速度,以柚皮素为竞争分子,分离因子可从修饰前的1.60提高到修饰后的3.06,吸附平衡时间从修饰前的100 min降低至修饰后的60 min;在一定范围内提高模板分子浓度,增大重氮甲烷用量,采用形成氢键能力较弱的溶剂,均能提高修饰效果。测定了修饰前后MIP中不同结合点吸附过程的焓变、熵变和自由能变化,从热力学角度对修饰效果和修饰机理作了进一步的分析。