Chitosan coated cellulose cotton fibers as catalyst for the H2 production from NaBH4 methanolysis

Cellulose cotton fibers (CF) are coated with chitosan (CH) by simple, economic, and environmental friendly method. The CFs are kept in aqueous acetic acid solution to protonate the fibers before coated with CH solution (1.5% w/v in acetic acid aqueous solution (20% v/v)), represented as CF-A-CH. These materials are characterized by ATR-FTIR, XRD, FE-SEM and EDS which shows the successful coating of the CH on the CF surface. The prepared materials are exploited as an effective catalyst for the production of hydrogen (H₂) from NaBH₄ methanolysis reaction. In addition, other polymers (gelatin and agarose) and surfactants (brij-56, pluronic F-127 and urea) as well as CH in solution form are testified as catalyst for NaBH₄ methanolysis reaction. High generation rate (8 times) and increase in amount of H₂ (150 mL) is observe using only 50 μL CH solution. Furthermore, influences of various constraints, which affect the H₂ production, like catalyst types, catalyst amount, NaBH₄ amount, effect of temperature are also explored. A low activation energy (Ea), almost 14.41 ± 0.46 kJ mol⁻¹ is calculated for NaBH₄ methanolysis reaction in presence of CF-A-CH at temperature range 0 °C - 45 °C. Moreover, the catalyst reusability is also analyzed and no decline in percent conversion is found, whereas a little reduction in percent performance is detected after every cycle and only 18% lost is observed in its percent activity after completion of five successive cycles.     

Hydrogen generation by hydrolysis of NaBH4

The hydrolysis of sodium-borohydride (SBH) to produce hydrogen has been studied at various temperatures using salts of nickel (II) or iron (III) as catalyst. Excess of water has been added to a mixture of solid SBH and catalyst to start hydrolysis reaction and the evolved hydrogen measured as a function of time. After a sudden peak a constant hydrogen flow was observed when Ni is used as catalyst. The activation energy has been evaluated from the dependence of the reaction time and of the hydrogen flow on the inverse of temperature. If Ni is substituted by a Fe based catalyst, after the initial increase, a different shape is observed in the hydrogen flow: it reaches a maximum and then monotonously decrease to zero. The different shape has been related to the different activity of the catalyst. The reaction activation energy was evaluated to be 73 KJ/mol.     

Highly efficient acid-treated cobalt catalyst for hydrogen generation from NaBH4 hydrolysis

The effect of cobalt-based catalysts, i.e. CoCl₂(20 wt% Co)/Al₂O₃ treated by different acids, on NaBH₄ hydrolysis was investigated. Five acids were used: oxalic acid, citric acid, acetic acid, sulfuric acid and hydrochloric acid. Two ways of acid treatment were considered: (i) ex-situ addition of acid to CoCl₂(20 wt% Co)/Al₂O₃ at room temperature and (ii) in-situ addition by mixing CoCl₂, Al₂O₃ and acid (one-step process). Both ways showed that adding an acid to the catalyst contributed to an important increase of the catalytic activity towards the NaBH₄ hydrolysis. The best performances were obtained with the catalysts treated with either HCl or CH₃COOH as the global activity of CoCl₂(20 wt% Co)/Al₂O₃ was increased up to 50%.     

Preparation and catalytic activity of wheat straw cellulose based hydrogel-nanometal composites for hydrogen generation from NaBH4 hydrolysis

A novel WSC (wheat straw cellulose) based hydrogel was prepared by solution polymerization and then applied as a template for in situ preparation of Ni and Cu nanoparticles for further utilization as catalyst in hydrogen generation from the hydrolysis of NaBH₄. SEM with EDS, XRD, TGA, XPS and BET surface area analyses were employed to characterize the structure of WSC based hydrogel-nanometal (Ni or Cu) composites. The effects of several parameters such as the mesh size of catalyst, the amount of catalyst, the initial concentration of NaBH₄ and the reaction temperature were studied. Based on the analysis of kinetics of the hydrolysis reaction of NaBH₄ at different temperatures, the activation energy was 32.66 (34.83) kJ mol^?1 for WSC based hydrogel-Ni (Cu) composites. The WSC based hydrogel-Ni (Cu) composites can be used up to 5 times with 100% conversion and 77.5% (70%) activity. When the catalyst was stored for 30 days, the catalyst was remained 70% activity for hydrogel-Ni composites and 65% activity for hydrogel-Cu composites, respectively.     

New insights into the mechanism of H2 generation through NaBH4 hydrolysis on Co-based nanocatalysts studied by differential reaction calorimetry

To our knowledge, the present study is the first investigation by liquid-phase calorimetry of the mechanism of hydrogen generation by hydrolysis of sodium borohydride catalyzed by Co₂B nanoparticles generated in situ. The differential reaction calorimeter was coupled with a volumetric hydrogen measurement, allowing a simultaneous thermodynamic and kinetic study of the reaction. At the end of the reaction, the catalyst was characterized ex situ by TEM, XRD, magnetism, N₂ adsorption, TGA–DTA, and the liquid hydrolysis products were analyzed by Wet-STEM and ¹¹B-NMR. The in situ preparation method made it possible to form nanoparticles (<12 nm) of Co₂B which are the active phase for the hydrolysis reaction. In semi-batch conditions, the Co₂B catalyst formed in situ is subsequently reduced by each borohydride addition and oxidized at the end of the hydrolysis reaction by OH⁻ in the presence of metaborate. A coating of the nanoparticles has been observed by calorimetry and physico-chemical characterization, corresponding to the formation of a 2–3 nm layer of cobalt oxide or hydroxide species.     

Hydrogen generation from Al/NaBH4 hydrolysis promoted by Li-NiCl2 additives

On-demand hydrogen generation from solid-state Al/NaBH₄ hydrolysis activated by Li-NiCl₂ additives are elaborated in the present paper. Hydrogen generation amount and rate can be regulated by changing Al/NaBH₄ weight ratio, Li and NiCl₂ amount, hydrolytic temperature, etc. The optimized Al−10 wt.% Li−15 wt.% NiCl₂/NaBH₄ mixture (weight ratio of 1:1) yields 1778 ml hydrogen/1 g mixture with 100% efficiency within 50 min at 323 K. The improved hydrolytic performance comes from the effect of Li-NiCl₂ additives, which decrease aluminum particle size in the milling process and produce the catalytic promoter BNi₂/Al(OH)₃ in the hydrolytic process. Compared with the conventional reaction of Al and NaBH₄ in water, there is an interaction of Al/NaBH₄ hydrolysis which improves the hydrolytic kinetics of Al/NaBH₄ via the catalytic effect of hydrolysis by-products Al(OH)₃, BNi₂, and NaBO₂. The Al/NaBH₄ mixture may be applied as a portable hydrogen generation material. Our experimental data lay a foundation for designing practical hydrogen generators.     

Metal nanoparticles supported on polyacrylamide water beads as catalyst for efficient generation of H2 from NaBH4 methanolysis

Water beads made from polyacrylamide polymer p-(AAm) were decorated with high efficient metal nanoparticles by inexpensive, fast, simple, and environmental friendly method. These water beads balls were kept in the metal salt solutions for 4 h; to adsorb the metals ions from these aqueous solutions. The metal ions decorated on the p-(AAm) water beads were converted to metal nanoparticles by its reduction with aqueous solution of NaBH₄. The prepared materials p-(AAm) loaded with MNPs (M@p-(AAm)) were characterized by ATR-FTIR, XRD, XPS, FESEM, and EDS which show the successful preparation of MNPs over the surface and within p-(AAm). Afterwards the M@p-(AAm) were investigated as a catalyst for the generation of hydrogen from the methanolysis of NaBH₄. The Ag@p-(AAm) show good catalytic activity for NaBH₄ methanolysis reaction as compared to the other loaded MNPs. In addition, different parameters which effecting H₂ generation were also investigated such as; MNPs types, catalyst amount and temperature of the reaction. Low activation energy (Ea) of 21.37 ± 0.67 kJ mol⁻¹, was calculated for NaBH₄ methanolysis reaction at temperature ranging from 5.0 °C to 35 °C. Moreover, the catalyst reusability was also studied and found no decrease in percent conversion, however percent efficiency was decreases about 37% after completion of four cycles.     

A durable ruthenium catalyst for the NaBH4 hydrolysis

Ru-active carbon (Ru/C) catalysts are prepared by impregnation reduction method for hydrogen generation via hydrolysis of alkaline sodium borohydride (NaBH₄) solution. The corresponding activity and durability of the prepared catalysts are tested in an immobile bed reactor. The variation of hydrogen generation rate with the increasing of flux and concentration of NaBH₄ solution is measured. The durability of the catalysts prepared under various reductive pH values and reductants is tested by using different concentrations of NaBH₄ solution (10 & 15 wt%). It is found that the durability of catalyst in 15 wt% NaBH₄ solution is longer than that in 10 wt% NaBH₄ solution. The deactivation of Ru/C catalysts is considered as the comprehensive effect of three factors: the loss of Ru, the deposition of byproducts on the catalyst surface and the aggregation of Ru particles.     

Monodispersed p(2-VP) and p(2-VP-co-4-VP) particle preparation and their use as template for metal nanoparticle and as catalyst for H2 production from NaBH4 and NH3BH3 hydrolysis

The monodispersed poly(2-vinyl pyridine) (p(2-VP)) and poly(2-vinyl pyridine-co-4-vinyl pyridine) (p(2-VP-co-4-VP)) particles of different compositions were synthesized by a surfactant-free emulsion polymerization system using divinyl benzene (DVB) as cross-linker. The diameter of p(2-VP) and p(2-VP-co-4-VP) particles were measured between 370 and 530 nm. Co, Ni and Cu metal nanoparticles were prepared inside these microgels after quaternization with HCl and loading of metal salts, such as CoCl₂, NiCl₂, and CuCl₂, in ethyl alcohol followed by reduction with NaBH₄. The prepared metal nanoparticles within these particles were used as catalyst for H₂ production via hydrolysis of NaBH₄ and NH₃BH₃. Various parameters of the polymeric microgels such as template, metal types, reuse, the amount of NaOH, and temperature were investigated. From hydrolysis reactions the activation energy (E_a), enthalpy (ΔH), and entropy (ΔS) were calculated for Co metal nanoparticles as catalyst for the NaBH₄ hydrolysis reaction in the temperature range of 0–50 °C. The activation parameters of NaBH₄ hydrolysis catalyzed by Co nanoparticle composite systems were calculated as 46.44 ± 1.1 kJ mol⁻¹ for E_a, 36.39 ± 6.5 kJ mol⁻¹ for ΔH and −170.56 ± 20.1 kJ mol⁻¹ K⁻¹ for ΔS.     

Direct NaBH4/H2O2 fuel cells

A fuel cell (FC) using liquid fuel and oxidizer is under investigation. H₂O₂ is used in this FC directly at the cathode. Either of two types of reactant, namely a gas-phase hydrogen or an aqueous NaBH₄ solution, are utilized as fuel at the anode. Experiments demonstrate that the direct utilization of H₂O₂ and NaBH₄ at the electrodes results in >30% higher voltage output compared to the ordinary H₂/O₂ FC. Further, the use of this combination of all liquid fuels, provides numerous advantages (ease of storage, reduced pumping requirements, simplified heat removal, etc.) from an operational point of view. This design is inherently compact compared to other cells that use gas phase reactants. Further, regeneration is possible using an electrical input, e.g. from power lines or a solar panel. While the peroxide-based FC is ideally suited for applications such as space power where air is not available and a high energy density fuel is essential, other distributed and mobile power uses are of interest.     

Fast hydrogen generation from NaBH4 hydrolysis catalyzed by carbon aerogels supported cobalt nanoparticles

Carbon aerogels (CAs) with oxygen-rich functional groups and high surface area are synthesized by hydrothermal treatment of glucose in the presence of boric acid, and are used as the support for loading cobalt catalysts (CAs/Co). Cobalt nanoparticles distribute uniformly on the surface of ACs, creating highly dispersed catalytic active sites for hydrolysis of alkaline sodium borohydride solution. A rapid hydrogen generation rate of 11.22 L min⁻¹ g_(cobalt)⁻¹ is achieved at 25 °C by hydrolysis of 1 wt% NaBH₄ solution containing 10 wt% NaOH and 20 mg the CAs/Co catalyst with a cobalt loading of 18.71 wt%. Furthermore, various influences are systematically investigated to reveal the hydrolysis kinetics characteristics. The activation energy is found to be 38.4 kJ mol⁻¹. Furthermore, the CAs/Co catalyst can be reusable and its activity almost remains unchanged after recycling, indicating its promising applications in fuel cell.     

Cobalt nanoparticles supported on magnetic core-shell structured carbon as a highly efficient catalyst for hydrogen generation from NaBH4 hydrolysis

A novel recyclable cobalt nanocatalyst, supported on magnetic carbon with core-shell structure, was successfully synthesized by using wetness impregnation-chemical reduction method for hydrogen generation from hydrolysis of NaBH₄. The resultant nanocomposite was characterized to determine the structural and physical-chemical properties by a series of analytical techniques such as FT-IR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), SEM (scanning electron microscope), EDX (energy-dispersive X-ray spectroscopy), TEM (transmission electron microscopy), etc. The results demonstrated that amorphous cobalt nanoparticles were homogeneously surrounded on the surface of the support due to having abundant hydrophilic groups (such as aldehyde and hydroxyl groups) on the surface of carbon layer for the effective immobilization of metal ions. The supported catalyst showed superior catalytic performance towards the hydrolysis reaction of NaBH₄ at room temperature. The total rate of hydrogen generation and activation energy were calculated to be 1403 ml H₂ g_cat^?1 min^?1 and 49.2 kJ mol^?1, respectively, which were comparable to the values of most cobalt-based catalyst reported for hydrogen production from hydrolysis of NaBH₄. Additionally, reusability test revealed that the hydrogen in NaBH₄ substrate could be completely released within 25 min with a minimum hydrogen generation rate of 832 ml H₂ g_cat^?1 min^?1 even after five runs of hydrolytic reaction, implying the as-prepared Co/Fe₃O₄@C composite could be considered as a promising candidate catalyst for portable hydrogen fuel system such as PEMFC (proton exchange membrane fuel cells).     

Mesocellular-foam-silica-supported Ni catalyst: Effect of pore size on H2 production from cellulose pyrolysis

Supported nickel metal can be used as a tar-cracking catalyst in the thermal processing of large organics to give H₂. Though porous supports offer the opportunity to disperse a relatively large amount of nickel, catalytic sites within small pores may be inaccessible to large tar molecules. To investigate this, we prepared nickel catalysts supported on γ-Al₂O₃ and on SBA-15- and mesocellular-foam-(MCF)-type silicas and studied their catalytic activities in the pyrolytic decomposition of cellulose (RT → 800 °C, ∂T/∂t = 40 °C/min). A thermogravimetric analyser-mass spectrometer (TG-MS) was used to study the influence of the Ni catalyst and support materials on the H₂ yield and selectivity. The silica-MCF-supported Ni catalyst decreased char residue and enhanced H₂ yield, producing 1.6 and 3.5× the H₂ yield obtained using SBA-15-supported Ni and γ-Al₂O₃-supported Ni, respectively. MCF, with ultra-large pores (d ∼ 15−50 nm), was thus identified as the most beneficial catalyst support for this application.     

Solution combustion synthesized cobalt oxide catalyst precursor for NaBH4 hydrolysis

In this paper we report the solution combustion synthesis of cobalt oxide nanofoam from solutions of cobalt nitrate and glycine and subsequent use as an effective catalyst precursor for NaBH₄ hydrolysis. The catalytic activity results show that the hydrogen generation rate (HGR) at room temperature was much higher for the solution combustion synthesized material than for commercial Co₃O₄ nanopowder, though their specific surface areas were comparable (∼26–32 m²/g). Using a 0.6 wt.% aqueous solution of NaBH₄ at 20 °C and a 5 wt.% catalyst precursor loading, a HGR of 1.93 L min⁻¹ g_cat⁻¹ was achieved for solution combustion synthesized Co₃O₄. In contrast, at the same conditions, for commercial Co₃O₄ and elemental Co powders HGRs of 0.98 and 0.49 L min⁻¹ g_cat⁻¹ were achieved respectively. This type of synthesis is amenable to many complex metal oxide catalysts as well, such as LiCoO₂, which have also been shown to be good catalyst precursors for hydrolysis of NaBH₄.     

Method of preparing Ru-immobilized polymer-supported catalyst for hydrogen generation from NaBH4 solution

A method of preparing a polymer-supported catalyst for hydrogen generation is introduced in this article. This polymer-supported catalyst is the structure of ruthenium (Ru) nanoparticle immobilized on a monodisperse polystyrene (PSt) microsphere. The diameter of the Ru nanoparticle is around 16 nm, and the diameter of the PSt microsphere is 2.65 um. This preparation method is accomplished by two unique techniques: one is sodium lauryl sulfate/sodium formaldehyde sulfoxylate (SLS/SFS) interface-initiated system, the other is 2-methacrylic acid 3-(bis-carboxymethylamino)-2-hydroxy-propyl ester (GMA-IDA) chelating monomer. By taking advantage of these two techniques, Ru³⁺ ion will be chelated and then reduced to Ru⁽⁰⁾ nanoparticle over PSt surface predominantly. The hydrolysis of alkaline sodium borohydride (NaBH₄) solution catalyzed by this Ru-immobilized polymer-supported catalyst is also examined in this article. It reveals that the hydrogen generation rate is 215.9 ml/min g-cat. in a diluted solution containing 1 wt.% NaBH₄ and 1 wt.% NaOH, and this Ru-immobilized polymer-supported catalyst could be recycled during the reaction.     

Preparation and catalytic activity of PVP-protected Au/Ni bimetallic nanoparticles for hydrogen generation from hydrolysis of basic NaBH4 solution

Poly(N-vinyl-2-pyrrolidone)(PVP)-protected Au/Ni bimetallic nanoparticles (BNPs) were prepared in one-vessel via chemical reduction of the corresponding ions with dropwise addition of NaBH₄, and their catalytic activity in the hydrogen generation from hydrolysis of a basic NaBH₄ solution was examined. The structure, particle size, and chemical composition of the resultant BNPs were characterized by Ultraviolet–visible spectrophotometry (UV–Vis), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM) and High-resolution transmission electron microscopy (HR-TEM). The effects of processing parameters such as metal composition, metal ion concentration, and mole ratio of PVP to metal ion on the hydrolysis of a basic NaBH₄ solution were studied in detail. The results indicated that as-prepared Au/Ni BNPs showed a higher catalytic activity than corresponding monometallic NPs (MNPs) in the hydrogen generation from the hydrolysis reaction of a basic NaBH₄ solution. Among all the MNPs and BNPs, Au/Ni BNPs with the atomic ratio of 50/50 exhibited the highest catalytic activity, showing a hydrogen generation rate as high as 2597 mL-H₂ min⁻¹ g-catalyst⁻¹ at 30 °C, which can be ascribed to the presence of negatively charged Au atoms and positively charged Ni atoms. Based on the kinetic study of the hydrogen generation from the hydrolysis reaction of a basic NaBH₄ solution over the PVP-protected Au/Ni BNPs, the corresponding apparent activation energy was determined as 30.3 kJ/mol for the BNPs with the atomic ratio of 50/50.     

Microstructural control of catalyst-loaded PVDF microcapsule membrane for hydrogen generation by NaBH4 hydrolysis

Polymer microcapsules were prepared and used as catalyst support for hydrogen generation from sodium borohydride. Polyvinylidene fluoride (PVDF) porous microcapsule membranes immobilized with metal salt (cobalt (II) chloride hexahydrate) catalyst and cobalt–boron catalyst were prepared, denoting them as MS and MP method respectively. Non-solvent coagulation bath consisting of a mixture of water and isopropanol (IPA) were used to prepare the microcapsules. The compositions of the non-solvents were changed with a ratio of 10:90 (v/v%)–50:50 (v/v%) with 1 wt% NaOH and 0.5 wt% NaBH₄. The effects of a number of parameters such as the kinds of additives, the size and morphology of the resulting microcapsules were studied on hydrogen generation. The structures and physical–chemical properties of the metal catalyst-loaded microcapsule membranes were characterized using SEM and EDX. The MS method used in preparing the microcapsule showed good performance in hydrogen generation from sodium borohydride. There was also improved performance in hydrogen generation with increasing IPA composition used in the metal salts loaded microcapsule preparation. The control of three regions inside the microcapsules (hollow region, crust region and skin layer) as well as the specific loading of metal catalysts gave a good hydrogen generation performance. The catalyst-loaded microcapsule also maintained an appreciable performance and stability after many runs of hydrolysis reaction for the hydrogen generation.     

NaBH4/H2O2 fuel cells for air independent power systems

The performance and characteristics of direct sodium-borohydride/hydrogen-peroxide (NaBH₄/H₂O₂) fuel cells are studied in the context of potential applications for air independent propulsion for outer space and underwater. Due to the existence of ocean (sea) water as a natural heat sink, this new fuel cell technology is best suited for underwater propulsion/power systems for small scale high performance marine vehicles. The characteristics of such a power system are compared to other options, specifically for the underwater scenario. The potential of this fuel cell is demonstrated in laboratory experiments. Power density over 1.5 W cm⁻², at 65 °C and ambient pressure, have been achieved with the help of some unique treatments of the fuel cell. One such treatment is an in-situ electroplating technique, which results in electrodes with power density 20–40% higher, than that of the electrodes produced by the ordinary ex-situ electroplating method. This unique process also makes repair or reconditioning of the fuel cell possible and convenient.     

Superporous P(2-hydroxyethyl methacrylate) cryogel-M (M:Co,Ni, Cu) composites as highly effective catalysts in H2 generation from hydrolysis of NaBH4 and NH3BH3

Highly porous p(2-hydroxyethyl methacrylate) p(HEMA) cryogels were synthesized via cryopolymerization technique and used as template for Co, Ni, and Cu nanoparticle preparation, then as composite catalyst systems in H₂ generation from hydrolysis of both NaBH₄ and NH₃BH₃. Due to their highly porous and open microstructures, p(HEMA)-Co cryogel composites showed very effective performances in H₂ production from hydrolysis of both chemical hydrides. The characterization of p(HEMA) cryogels, and their metal composites was determined via various techniques including swelling experiments, digital camera images, SEM and TEM images, AAS and TGA measurements. The effect of various parameters on the hydrolysis reaction of NaBH₄ such as metal types, concentration of chemical hydrides, amounts of catalyst, alkalinity of reaction medium and temperature were investigated in detail. It was found that Co nanoparticles are highly active catalysts in H₂ generation reactions from both hydrides. The hydrogen generation rate (HGR) of p(HEMA)-Co was 1596 (mL H₂) (min)⁻¹ (g of Co)⁻¹ which is quite good in comparison to reported values in the literature. Furthermore, kinetic parameters of p(HEMA)-Co metal composites such as energy, enthalpy and entropy were determined as Ea = 37.01 kJmol⁻¹, ΔH# = 34.26 kJmol⁻¹, ΔS# = −176,43 Jmol⁻¹ K⁻¹, respectively.