Manipulation of electron orbitals in hard-wall InAs/InP nanowire quantum dots

We present a novel technique for the manipulation of the energy spectrum of hard-wall InAs/InP nanowire quantum dots. By using two local gate electrodes, we induce a strong transverse electric field in the dot and demonstrate the controlled modification of its electronic orbitals. Our approach allows us to dramatically enhance the single-particle energy spacing between the first two quantum levels in the dot and thus to increment the working temperature of our InAs/InP single-electron transistors. Our devices display a very robust modulation of the conductance even at liquid nitrogen temperature, while allowing an ultimate control of the electron filling down to the last free carrier. Potential further applications of the technique to time-resolved spin manipulation are also discussed.     

InAs/InP radial nanowire heterostructures as high electron mobility devices

Radial core/shell nanowires (NWs) represent an important class of one-dimensional (1D) systems with substantial potential for exploring fundamental materials electronic and photonic properties. Here, we report the rational design and synthesis of InAs/InP core/shell NW heterostructures with quantum-confined, high-mobility electron carriers. Transmission electron microscopy studies revealed single-crystal InAs cores with epitaxial InP shells 2-3 nm in thickness, and energy-dispersive X-ray spectroscopy analysis further confirmed the composition of the designed heterostructure. Room-temperature electrical measurements on InAs/InP NW field-effect transistors (NWFETs) showed significant improvement in the on-current and transconductance compared to InAs NWFETs fabricated in parallel, with a room-temperature electron mobility, 11,500 cm(2)/Vs, substantially higher than other synthesized 1D nanostructures. In addition, NWFET devices configured with integral high dielectric constant gate oxide and top-gate structure yielded scaled on-currents up to 3.2 mA/microm, which are larger than values reported for other n-channel FETs. The design and realization of high electron mobility InAs/InP NWs extends our toolbox of nanoscale building blocks and opens up opportunities for fundamental and applied studies of quantum coherent transport and high-speed, low-power nanoelectronic circuits.     

Mechanisms of molecular beam epitaxy growth in InAs/InP nanowire heterostructures

InAs/InP axial nanowire heterostructures were grown by the Au-assisted vapour-liquid-solid method in a gas source molecular beam epitaxy system. The nanowire crystal structure and morphology were investigated by transmission electron microscopy for various growth conditions (temperature, growth rate, V/III flux ratio). Growth mechanisms were inferred from the InAs and InP segment lengths as a function of the nanowire diameter. Short InAs segment lengths were found to grow by depletion of In from the Au particle as well as by direct impingement, while longer segments of InAs and InP grew by diffusive transport of adatoms from the nanowire sidewalls. The present study offers a way to control the lengths of InAs quantum dots embedded in InP barriers.     

Self-aligned charge read-out for InAs nanowire quantum dots

A highly sensitive charge detector is realized for a quantum dot in an InAs nanowire. We have developed a self-aligned etching process to fabricate in a single step a quantum point contact in a two-dimensional electron gas and a quantum dot in an InAs nanowire. The quantum dot is strongly coupled to the underlying point contact that is used as a charge detector. The addition of one electron to the quantum dot leads to a change of the conductance of the charge detector by typically 20%. The charge sensitivity of the detector is used to measure Coulomb diamonds as well as charging events outside the dot. Charge stability diagrams measured by transport through the quantum dot and charge detection merge perfectly.     

Transformation of self-assembled InAs/InP quantum dots into quantum rings without capping

Transformation of self-assembled InAs quantum dots (QDs) on InP(100) into quantum rings (QRs) is studied. In contrast to the typical approach to III--V semiconductor QR growth, the QDs are not capped to form rings. Atomic force micrographs reveal a drastic change from InAs QDs into rings after a growth interruption in tertiarybutylphosphine ambient. Strain energy relief in the InAs QD is discussed and a mechanism for dot-to-ring transformation by As/P exchange reactions is proposed.     

Self-assembling InAs and InP quantum dots for optoelectronic devices

Stranski–Krastanov growth in molecular beam epitaxy allows the preparation of self assembling InAs and InP quantum dots on GaAs and Ga_0.52In_0.48P buffer layers, respectively. InAs dots in GaAs prepared by slow growth rates and low temperature overgrowth provide intense photoluminescence at the technologically important wavelength of 1.3 μm at room temperature. Strain induced vertical alignment, size modification and material interdiffusion for stacked dot layers are studied. A blue shift of the ground state transition energy is observed for the slowly deposited stacked InAs dots. This is ascribed to enhanced strain driven intermixing in vertically aligned islands. For very small densely stacked InP and InAs dots the reduced confinement shift causes a red shift of the ground state emission. The InP quantum dots show intense and narrow photoluminescence at room temperature in the visible red spectral range. First InP/Ga_0.52In_0.48P quantum dot injection lasers are prepared using threefold stacked InP dots. We observe lasing at room temperature in the wavelength range between 690–705 nm depending on the size of the stacked InP dots.     

Statistics of electron emission from InAs/GaAs quantum dots

A theoretical treatment for thermal and tunneling emission of electrons from InAs/GaAs quantum dots is performed to achieve “effective emission rates” corresponding to experimentally obtained quantities. From these results, Arrhenius graphs are calculated using parameter values for quantum dots with 20/10 nm base/height dimension. Emission from the electron s shell as direct transitions, as two-step transitions from the s to the p shell, as thermal transitions from s to p followed by tunneling and as direct tunneling from the s and the p shell to the GaAs conduction band is taken into account. Due to the varying emission possibilities, Arrhenius graphs appear with complicated shapes depending on quantities originating from structural and electronic properties of the quantum dots.     

Scanning gate imaging of quantum dots in 1D ultra-thin InAs/InP nanowires

We use a scanning gate microscope (SGM) to characterize one-dimensional ultra-thin (diameter ≈ 30 nm) InAs/InP heterostructure nanowires containing a nominally 300 nm long InAs quantum dot defined by two InP tunnel barriers. Measurements of Coulomb blockade conductance versus backgate voltage with no tip present are difficult to decipher. Using the SGM tip as a charged movable gate, we are able to identify three quantum dots along the nanowire: the grown-in quantum dot and an additional quantum dot near each metal lead. The SGM conductance images are used to disentangle information about individual quantum dots and then to characterize each quantum dot using spatially resolved energy-level spectroscopy.     

Giant fluctuations and gate control of the g-factor in InAs nanowire quantum dots

We study the g-factor of discrete electron states in InAs nanowire based quantum dots. The g values are determined from the magnetic field splitting of the zero bias anomaly due to the spin 1/2 Kondo effect. Unlike to previous studies based on 2DEG quantum dots, the g-factors of neighboring electron states show a surprisingly large fluctuation: g can scatter between 2 and 18. Furthermore electric gate tunability of the g-factor is demonstrated.     

Argon-plasma-induced InAs/InGaAs/InP quantum dot intermixing

We report the first study of argon (Ar)-plasma-enhanced intermixing of InAs/InGaAs/InP self-assembled quantum dots (QDs) in an inductively coupled plasma reactive ion etch system. The Ar-plasma exposure creates point defects, which propagate into the QD structure and enhance the intermixing between the QDs and their barrier layers, hence tuning the energy bandgap of the QDs. By optimizing the plasma exposure time and the annealing temperature, we observe (i) a blueshift of 160?nm and an increase in the photoluminescence (PL) intensity of the QD samples immediately after Ar-plasma exposure for 90?s, and (ii) a further increase in the blueshift of 330?nm, accompanied by 2.5-times increase in the PL intensity and 37?nm narrowing in the PL linewidth after subsequent rapid thermal annealing at 720?°C. The ability to generate a large blueshift without degrading the material quality shows that Ar-plasma exposure is an efficient post-growth technique for tuning the energy bandgap of QD structures.     

Room-temperature photoconductivity in the 1–2.6 µm range in InAs/GaAs heterostructures with quantum dots

We have studied the room-temperature photoconductivity in the wavelength range 1–2.6 μm in InAs/GaAs heterostructures with quantum dots (QDs). Specific features of these heterostructures grown using the metalorganic vapor phase epitaxy (MOVPE) were an increase in the amount of InAs during the formation of a sheet of QDs and the use of alternating low-and-high-temperature regimes during their overgrowth with a GaAs barrier layer. For the first time, the MOVPE-grown multilayer InAs/GaAs heterostructures with quantum dots exhibited photoluminescence in a wavelength range of up to 1.6 μm and the photoconductivity up to 2.6 μm at room temperature. The heterostructures exhibited a room-temperature voltage sensitivity of 3 × 10³ V/W (within a Si-plate filter bandwidth) and a specific detectivity of 9 × 10⁸ cm Hz^1/2 W^?1.     

Tunable double quantum dots in InAs nanowires defined by local gate electrodes

We report on low-temperature transport measurements on single and double quantum dots defined using local gates to electrostatically deplete InAs nanowires grown by chemical beam epitaxy. This technique allows us to define multiple quantum dots along a semiconducting nanowire and tune the coupling between them.     

Optical properties of rotationally twinned InP nanowire heterostructures

We have developed a technique so that both transmission electron microscopy and microphotoluminescence can be performed on the same semiconductor nanowire over a large range of optical power, thus allowing us to directly correlate structural and optical properties of rotationally twinned zinc blende InP nanowires. We have constructed the energy band diagram of the resulting multiquantum well heterostructure and have performed detailed quantum mechanical calculations of the electron and hole wave functions. The excitation power dependent blue-shift of the photoluminescence can be explained in terms of the predicted staggered band alignment of the rotationally twinned zinc blende/wurzite InP heterostructure and of the concomitant diagonal transitions between localized electron and hole states responsible for radiative recombination. The ability of rotational twinning to introduce a heterostructure in a chemically homogeneous nanowire material and alter in a major way its optical properties opens new possibilities for band-structure engineering.     

Room-temperature photoluminescence at 1.55 μm from heterostructures with InAs/InGaAsN quantum dots on GaAs substrates

Room-temperature photoluminescence (PL) at 1.55 μm from heterostructures with InAs/InGaAsN quantum dots (QDs) grown by MBE on GaAs substrates is demonstrated for the first time. The effect of nitrogen incorporated into InAs/InGaAsN QDs on the PL wavelength and intensity was studied. The integral intensity of PL from the new structure with InAs/(In)GaAsN QDs is comparable to that from a structure with InGaAsN quantum wells emitting at 1.3 μm.     

Morphology and composition of InAs/GaAs quantum dots

Surface compositional maps of self-organized InAs/GaAs quantum dots were obtained with laterally resolved photoemission spectroscopy. We found a surface In concentration of about 0.85 at the center of the islands which decreases to 0.75 on the wetting layer. Comparison with concentration values found in the core of similar dots suggests a strong In segregation on the topmost surface layers of the dots and on the surrounding wetting layer. Furthermore, the morphological properties of the dots such as size and density have been measured with plan-view transmission electron microscopy and low energy electron microscopy.     

Deep levels induced by InAs/GaAs quantum dots

Self-organised InAs/GaAs quantum dots (QDs) were formed by molecular beam epitaxy using the Stranski–Krastanov growth mode. Deep-level transient spectroscopy as well as secondary ion mass spectrometry have been used to characterise structures containing the QDs. DLTS depth profiling procedures indicate that deep level-related defects are localised in GaAs in the vicinity of the QD plane. For the first time, we report the presence of a deep level-related trap with an extremely high thermal activation energy of E_c − 1.03 eV. An electron trap at E_c − 0.78 eV can be identified as the well-known level related to the EL2 family. We conclude that a third trap revealed at E_c −0.57 eV is the familiar PL killer related to the intrinsic point defect-oxygen complex. The latter is confirmed by results of the SIMS study, which indicates that the amount of oxygen accumulated at the InAs/GaAs heterointerface is increased. This paper demonstrates that the EL2 and oxygen-related deep-level centers occur by the presence of InAs/GaAs QDs. We present the hypothesis that deep states could be a factor limiting the efficiency of QD-based devices.     

Mobility asymmetry in InGaAs/InAlAs heterostructures with InAs quantum wires

Strong asymmetry of electron mobility in InGaAs/InAlAs heterostructures (lattice matched to InP) with the presence of InAs quantum wires was observed. Self-assembled InAs quantum wires, embedded in an InGaAs matrix close to the hetero-interface, has a strong effect in electron conduction in the interface channel. The low temperature mobility for electrons moving parallel to the quantum wires is much higher than that of electrons moving perpendicular to the wires. The asymmetry in mobility is attributed to the difference in scattering cross section of the quantum wires in these two directions.     

Defects in nanostructures with ripened InAs/GaAs quantum dots

InAs/GaAs quantum dot (QD) structures were grown by molecular beam epitaxy (MBE) with InAs coverages θ continuously graded from 1.5 ML to 2.9 ML. A critical coverage of 2.23 ML is found, above which the islands undergo ripening, which causes a fraction of quantum dots to increase in size and to eventually relax through the formation of pure, edge-type misfit dislocations which propagate towards the surface in the form of V-shaped defects. Concomitant with ripening, extended-defect related traps with activation energies of 0.52 and 0.84 eV were observed, and regarded as the cause of the significant worsening of the optical and electrical properties in high coverage structures. Their relationship with the observed dislocations is discussed.