Differential metabolomics using stable isotope labeling and two-dimensional gas chromatography with time-of-flight mass spectrometry

This work describes an approach to differential metabolomics that involves stable isotope labeling for relative quantification as part of sample analysis by two-dimensional gas chromatography/mass spectrometry (GCxGC/MS). The polar metabolome in control and experimental samples was extracted and differentially derivatized using isotopically light and heavy (D6) forms of the silylation reagent N-methyl-N-tert-butyldimethylsilyl)trifluoroacetamide (MTBSTFA). MTBSTFA derivatives are of much greater hydrolytic stability than the more common trimethylsilyl derivatives, thus diminishing the possibility of isotopomer scrambling during GC analysis. Subsequent to derivatization with MTBSTFA, differentially labeled samples were mixed and analyzed by GCxGC/MS. Metabolites were identified, and the isotope ratio of isotopomers was quantified. The method was tested using three classes of metabolites; amino acids, fatty acids, and organic acids. The relative concentration of isotopically labeled metabolites was determined by isotope ratio analysis. The accuracy and precision, respectively, in quantification of standard mixtures was 9.5 and 4.77% for the 16 amino acids, 9.7 and 2.83% for the mixture of 19 fatty acids, and 14 and 4.53% for the 20 organic acids. Suitability of the method for the examination of complex samples was demonstrated in analyses of the spiked blood serum samples. This differential isotope coding method proved to be an effective means to compare the concentration of metabolites between two samples simultaneously.     

Relative quantification of carboxylic acid metabolites by liquid chromatography-mass spectrometry using isotopic variants of cholamine

Labeling reagents that differ only in their isotopic composition offer a powerful approach to achieve relative quantification between samples by ESI-MS. Heavy and light isotopic forms of cholamine, which contain a positively charged quaternary ammonium group, were synthesized and tested as new labeling reagents for the relative quantification of carboxylic acid-containing metabolites, specifically fatty acids. The positive charge on cholamine ensures that the labeled product is also positively charged under all LC-MS conditions, regardless of mobile-phase pH. This leads to high ionization efficiency and correspondingly high detection sensitivity, demonstrated here for the analysis of fatty acids in positive ion mode ESI-MS after reversed-phase separation under acidic conditions. Good accuracy and precision were obtained by mixing heavy- and light-labeled hydrolyzed egg lipid extracts in different known ratios. The relative quantification results for 10 observed fatty acids had an average absolute error of 4.6% and an average coefficient of variation (CV) of 2.6%. The labeling strategy yielded a median CV of 6% when employed for fatty acid analysis of eggs from chickens fed various dietary supplements.     

Fractionation of isotopically labeled peptides in quantitative proteomics.

The goal of quantitative proteomics is to examine the expression levels of all of the proteins in a biological system and recognize those that change as a function of some stimulus. Quantification is now frequently based on derivatization of peptides with isotopically distinguishable labeling agents. This study examines the extent to which isotopic forms of peptides having the same amino acid sequence are resolved by reversed-phase chromatography and assesses the degree to which resolution of these isotopically different forms of a peptide impact quantification. Three derivatizing agents were examined, the do and d3 forms of N-acetoxysuccinimide, the do and d4 forms of succinic anhydride, and the do and d8 forms of the commercial ICAT reagent Peptide mixtures from control and experimental samples were derivatized individually, mixed, subjected to reversed-phase chromatography, and analyzed by ESI-MS. When partial resolution of the isotopic forms of a peptide occurs, the largest error in assessing the true isotope ratio in a sample occurs when sampling at the extremes of a peak. Early in the elution of a peak, the sample will be enriched in the deuterated species, whereas the opposite is true at the tailing edge of a peak. Acetylated peptides showed the lowest degree of separation. Resolution of the deuterated and nondeuterated forms in this case was 0.023. This amounts to slightly over a 1-s difference in their peak maxima and can cause a typical error of +/- 6% at the leading and tailing edges of a peak. In contrast, resolution of the deuterated and nondeuterated forms of the ICAT reagent were calculated to be 0.45. This means that in a peak of 1-min width (W1/2), the peak maxima will vary by approximately 30 s, and measurement errors of -83 and +500% can occur at the leading and tailing edges of a peak. It is concluded that resolution of isotopic forms of a peptide can cause substantial quantification errors in quantitative proteomics.     

Detection of chlorinated and brominated byproducts of drinking water disinfection using electrospray ionization-high-field asymmetric waveform ion mobility spectrometry-mass spectrometry.

The lower limit of detection for low molecular weight polar and ionic analytes using electrospray ionization-mass spectrometry (ESI-MS) is often severely compromised by an intense background that obscures ions of trace components in solution. Recently, a new technique, referred to as high-field asymmetric waveform ion mobility spectrometry (FAIMS), has been shown to separate gas-phase ions at atmospheric pressure and room temperature. A FAIMS instrument is an ion filter that may be tuned, by control of electrical voltages, to continuously transmit selected ions from a complex mixture. This capability offers significant advantages when FAIMS is coupled with ESI, a source that generates a wide variety of ions, including solvent clusters and salt adducts. In this report, the tandem arrangement of ESI-FAIMS-MS is used for the analysis of haloacetic acids, a class of disinfection byproducts regulated by the US EPA. FAIMS is shown to effectively discriminate against background ions resulting from the electrospray of tap water solutions containing the haloacetic acids. Consequently, mass spectra are simplified, the selectivity of the method is improved, and the limits of detection are lowered compared with conventional ESI-MS. The detection limits of ESI-FAIMS-MS for six haloacetic acids ranged between 0.5 and 4 ng/mL in 9:1 methanol/tap water (5 and 40 ng/mL in the original tap water samples) with no preconcentration, derivatization, or chromatographic separation prior to analysis.     

Quantification and identification of components in solution mixtures from 1D proton NMR spectra using singular value decomposition

One-dimensional proton NMR spectra of complex solutions provide rich molecular information, but limited chemical shift dispersion creates peak overlap that often leads to difficulty in peak identification and analyte quantification. Modern high-field NMR spectrometers provide high digital resolution with improved peak dispersion. We took advantage of these spectral qualities and developed a quantification method based on linear least-squares fitting using singular value decomposition (SVD). The linear least-squares fitting of a mixture spectrum was performed on the basis of reference spectra from individual small-molecule analytes. Each spectrum contained an internal quantitative reference (e.g., DSS-d6 or other suitable small molecules) by which the intensity of the spectrum was scaled. Normalization of the spectrum facilitated quantification based on peak intensity using linear least-squares fitting analysis. This methodology provided quantification of individual analytes as well as chemical identification. The analysis of small-molecule analytes over a wide concentration range indicated the accuracy and reproducibility of the SVD-based quantification. To account for the contribution from residual protein, lipid or polysaccharide in solution, a reference spectrum showing the macromolecules or aggregates was obtained using a diffusion-edited 1D proton NMR analysis. We demonstrated this approach with a mixture of small-molecule analytes in the presence of macromolecules (e.g., protein). The results suggested that this approach should be applicable to the quantification and identification of small-molecule analytes in complex biological samples.     

Two trace analytical methods for determination of hydroxylated PCBs and other halogenated phenolic compounds in eggs from Norwegian birds of prey

Two new trace analytical methods are presented for identification and quantification of phenolic compounds in complex biological matrixes such as bird of prey eggs. One method is based on derivatization with methyl chloroformate prior to GC/high-resolution MS (HRMS) analysis in electron impact ionization mode. Alternatively, the underivatized phenolic analytes were separated and detected by HPLC coupled to time-of-flight MS (TOF-MS) in the negative ion electrospray ionization mode. For both methods, the egg samples were homogenized and dried with acidified sodium sulfate, cold column-extracted, and cleaned up by gel permeation chromatography and subsequently a Florisil column. Recovery rates for pentachlorophenol (PCP), tetrabromobisphenol A (TBBPA), and selected hydroxylated PCBs (HO-PCBs) from spiked hen's eggs (spiking level 1 ng/g of wet weight (ww)) were in the range of 56-98% for the HPLC/MS method and 57-108% for GC/MS including derivatization. Typical detection limits of the HPLC/TOF-MS method were 5 pg/g ww (1-2 pg injected) for HO-PCBs and PCP and 20 pg/g ww (3 pg injected) for TBBPA. The GC/HRMS method achieved detection limits of approximately 1 pg/g ww in predatory bird eggs for all analytes (0.2 pg injected for derivatized TBBPA and 0.05 pg injected for derivatized HO-PCBs and PCP). Eight eggs from four different Norwegian predatory bird species were analyzed. The concentrations determined with the two different quantification methods corresponded well with each other. PCP and TBBPA were found in all samples at concentrations up to 1350 and 13 pg/g ww, respectively (GC/HRMS values). A total of 55 penta- to nonachloro-HO-PCB congeners were detected in the eight eggs, 10 of those could be structurally identified. The maximum HO-PCB congener concentration was found for 4-HO-CB 187 in a peregrine falcon egg with estimated 388 pg/g ww. Another peregrine falcon egg was highest contaminated with sum HO-PCBs (estimated 2.1 ng/g ww). This level was 1.2 per thousand of the sum PCBs value for the same egg. Furthermore, indications were found that the HO-PCB congener distribution pattern could be species specific for predatory birds.     

Simultaneous quantification of opiates, cocaine, and metabolites in hair by LC-APCI-MS/MS

A quantitative LC-APCI-MS/MS method for simultaneous measurement of opiates, cocaine, and metabolites in hair was developed and validated. Cocaine and opiates were extracted from pulverized hair via sonication in methanol at 37 degrees C for 3 h. Samples were cleaned up using solid-phase extraction. LC separation was achieved in 20 min with identification and quantification by selected reaction monitoring. Calibration by linear regression analysis utilized deuterated internal standards and a weighting factor of 1/x (R(2) > 0.998). Limits of quantification (LOQ) ranged from 17 to 50 pg/mg for cocaine and metabolites and were 83 pg/mg for opiates. Standard curves were linear from the LOQ to 5000 pg/mg for cocaine and metabolites, except benzoylecgonine (2500 pg/mg). Opiate standard curves were linear from the LOQ to 12500 pg/mg. Accuracy ranged from 84 to 115% for all quantitative analytes. Precision, % relative standard deviation, was less than 11.0% for all analytes. Methanolic sonication produced less than 5% hydrolysis of cocaine and 6-acetylmorphine. The method should be useful for studying cocaine and opiate distribution into hair.     

Electrogenerated chemiluminescence derivatization reagents for carboxylic acids and amines in high-performance liquid chromatography using tris(2,2'-bipyridine)ruthenium(II)

2-(2-Aminoethyl)-1-methylpyrrolidine and N-(3-aminopropyl)pyrrolidine (NAPP) were found to be selective and sensitive derivatization reagents for carboxylic acid by high-performance liquid chromatography (HPLC) with electrogenerated chemiluminescence detection using tris(2,2'-bipyridine)ruthenium(II). Free fatty acids and ibuprofen were used as model compounds of carboxylic acids, and the derivatization conditions were optimized with myristic acid as a representative of free fatty acids. All the fatty acids tested were reacted with NAPP to produce highly sensitive derivatives under the mild reaction conditions of room temperature for 30 min in acetonitrile containing 2-bromo-1-ethylpyridinium tetrafluoroborate and 9-methyl-3,4-dihydro-2H-pyrido[1,2-a]pyrimidin-2-one. The chemiluminescence intensities were similar for all fatty acids. The derivatives obtained from 10 free fatty acids were completely separated by reversed-phase chromatography under isocratic elution conditions. The on-column detection limits (signal-to-noise ratio of 3) with proposed HPLC separation and chemiluminescence detection were 70 and 45 fmol for myristic acid and ibuprofen, respectively. The free fatty acids in human plasma were successfully determined using the present method. Histamine, a model compound of primary amines, was also determined after precolumn derivatization with 3-(diethylamino)propionic acid at room temperature for 60 min in acetonitrile containing N,N'-dicyclohexylcarbodiimide and 3,4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine with the detection limit of 70 fmol.     

Characterization of vegetable oils by electrospray ionization mass spectrometry fingerprinting: classification, quality, adulteration, and aging

An improved approach for the direct infusion electrospray ionization mass spectrometry (ESI-MS) analysis of vegetable oils is described. The more polar components of the oils, including the fatty acids, are simply extracted with methanol/water (1:1) solution and analyzed by direct infusion ESI-MS in both the negative and positive ion modes. This fingerprinting analysis was applied to genuine samples of olive, soybean, corn, canola, sunflower, and cottonseed oil, to admixtures of these oils, and samples of aged soybean oil. ESI-MS fingerprints in the positive ion mode of the extracts divide the oils into well-defined groups, as confirmed by principal component analysis, whereas ESI-MS fingerprints in the negative ion mode clearly differentiate olive oil from the five other refined oils. The method is also shown to detect aging and adulteration of vegetable oils.     

In situ derivatization/solid-phase microextraction: determination of polar aromatic amines

A solid-phase microextraction GC/MS method for the trace determination of a wide variety of polar aromatic amines in aqueous samples was developed. Prior to extraction the analytes were derivatized directly in the aqueous solution by diazotation and subsequent iodination in a one-pot reaction. The derivatives were extracted by direct-SPME using a PDMS/DVB fiber and analyzed by GC/MS in the full-scan mode. By diazotation/iodination, the polarity of the analytes was significantly decreased and as a consequence extraction yields were dramatically improved. The derivatization proved to be suitable for strongly deactivated aromatic amines and even the very polar diamino compounds can efficiently be enriched after derivatization. We investigated 18 anilines comprising a wide range of functional groups, which could be determined simultaneously. The method was thoroughly validated, and the precision at a concentration of 0.5 microg/L was 3.8-11% relative standard deviation for nonnitrated analytes using aniline-d(5) as internal standard and 3.7-10% for nitroaromatic amines without internal standard. The in situ derivatization/SPME/GC/MS method was calibrated over the whole analytical procedure and was linear over 2 orders of magnitude. Using 10-mL samples, detection limits of 2-13 ng/L were achieved for 15 of the 18 analytes. For two aminodinitrotoluene isomers and a diaminonitrotoluene, detection limits ranged from 27 to 38 ng/L. By allowing quantification at the 0.1 microg/L level, analysis of all target compounds meets EU drinking water regulations. The method provides high sensitivity, robustness, and high sample throughput by automation. Finally, the method was applied to various real water samples and in wastewater from a former ammunition plant the contents of several aromatic amines were quantified.     

Analysis of underivatized amino acids and their D/L-enantiomers by sheathless capillary electrophoresis/electrospray ionization mass spectrometry

Capillary electrophoresis/electrospray ionization-mass spectrometry (CE/ESI-MS) was applied to the analysis of underivatized amino acids and the separation of their D/L-enantiomers. Under full-scan mode, all standard protein amino acids were separated and detected at low-femtomole levels using a 130-cm-long, 20-microm-i.d., 150-microm-o.d. underivatized fused-silica capillary with 1 M formic acid as the background electrolyte. The CE/ESI-MS technique was also applied to the separation of L-arginine from L-canavanine (a close analogue of arginine where the terminal methylene linked to the guanidine group of arginine is replaced by an oxygen atom) in a complex mixture containing all standard protein amino acids. The utility of CE/ESI-MS in the analysis of real-world samples was demonstrated by the identification of two metabolic diseases (PKU and tyrosinemia) through blood analysis with minimal sample preparation. In addition, the on-line separation of 11 underivatized L-amino acids from their D-enantiomers was achieved by using a 30 mM solution of (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid as the background electrolyte.     

Dried blood spot analysis by digital microfluidics coupled to nanoelectrospray ionization mass spectrometry

Dried blood spot (DBS) samples on filter paper are surging in popularity as a sampling and storage vehicle for a wide range of clinical and pharmaceutical applications. For example, a DBS sample is collected from every baby born in the province of Ontario, Canada, for quantification of approximately one hundred analytes that are used to screen for 28 conditions, including succinylacetone (SA), a marker for hepatorenal tyrosinemia. Unfortunately, the conventional methods used to evaluate DBS samples for newborn screening and other applications are tedious and slow, with limited options for automated analysis. In response to this challenge, we have developed a method to couple digital microfluidics (DMF) to nanoelectrospray ionization mass spectrometry (nESI-MS) for SA quantification in DBS samples. The new system is formed by sandwiching a pulled glass capillary emitter between the two DMF substrates such that the capillary emitter is immobilized without external seals or gaskets. Moreover, we introduce a new feedback control system that enables high-fidelity droplet manipulation across DBS samples without manual intervention. The system was validated by application to on-chip extraction, derivatization, and analysis of SA and other analytes from DBS samples, with comparable performance to gold-standard methods. We propose that the new methods described here can potentially contribute to a new generation of analytical techniques for quantifying analytes in DBS samples for a wide range of applications.     

Electrogenerated chemiluminescence derivatization reagent, 3-isobutyl-9,10-dimethoxy-1,3,4,6,7,11b-hexahydro-2H-pyrido[2,1-a]isoquinolin-2-ylamine,for carboxylic acid in high-performance liquid chromatography using tris(2,2'-bipyridine)ruthenium(II)

3-Isobutyl-9,10-dimethoxy-1,3,4,6,7,11b-hexahydro-2H-pyrido[2,1-a]isoquinolin-2-ylamine (IDHPIA) was found to be a selective and highly sensitive derivatization reagent for carboxylic acid by high-performance liquid chromatography (HPLC) with electrogenerated chemiluminescence detection using tris(2,2'-bipyridine)ruthenium(II). Free fatty acids and phenylbutylic acid were used as model compounds of carboxylic acids, and the derivatization conditions were optimized with myristic acid. Under the mild reaction conditions of room temperature for 45 min in acetonitrile containing 2-bromo-1-ethylpyridinium tetrafluoroborate and 9-methyl-3,4-dihydro-2H-pyridol1,2-a]pyrimidin-2-one, all the fatty acids tested were reacted with IDHPIA to produce highly sensitive derivatives. The chemiluminescence intensity was essentially the same for all fatty acids. The derivatives obtained from 10 free fatty acids were completely separated by reversed-phase chromatography under isocratic elution conditions. The on-column detection limit (signal-to-noise ratio of 3) with proposed HPLC separation and chemiluminescence detection was 0.5 and 0.6 fmol for myristic acid and phenylbutylic acid, respectively. IDHPIA was 100-fold more sensitive than previously developed reagents (Morita, H.; Konishi, M. AnaL Chem. 2002, 74, 1584-1589). The free fatty acids in human serum were successfully determined using the present method.     

Solid-phase microextraction in combination with GC/MS for quantification of the major volatile free fatty acids in ewe cheese

This work describes a method for quantification of the major free fatty acids of ewe cheese that contribute to its distinct and strongly marked flavor. A headspace SPME method in combination with GC/MS was used for the extraction, identification, and quantification of butanoic, hexanoic, octanoic and decanoic acids in ewe cheeses. The method used for sample preparation was simple. A fiber coated with 85-microm polyacrylate film was chosen to extract the free fatty acids. To perform a reliable quantification, several factors were taken into consideration for reliable quantification, namely, (i) the influence of addition of water, of an electrolyte or of a hygroscopic salt, on the release of free fatty acids from the matrix; (ii) the linear relationship between the amount of analyte adsorbed by the SPME polymer film and the initial concentration of the analyte in the cheese sample; and (iii) the competition for adsorption by fiber. Water removal with sodium sulfate promoted a more efficient extraction of volatile free fatty acids; biases due to competition or linear range excesses were controlled by choosing the appropriate amount of sample for each ewe cheese. The method of standard additions was used with success for the quantification of free fatty acids. Calibration curves that were constructed for the major short-chain free fatty acids (butanoic, hexanoic, octanoic, and decanoic acids) spiked into cheese followed linear relationships with highly significant (p < 0.001) correlation coefficients (r > 0.999). Coefficients of variation of <7.9% indicated that the technique was reproducible. A marked increase in concentration of short-chain free fatty acids was observed during cheese ripening, ranging from 0.35 to 9.33 mg/100 g for butanoic acid, 0.363 to 4.34 mg/100 g for hexanoic acid, 0.343 to 2.0 mg/100 g for octanoic acid, and 1.291 to 3.85 mg/100 g for decanoic acid. The limits of quantification were registered at levels of parts per million. The absolute quantification of butanoic acid was also carried out by using isotope dilution assays (IDA). The levels of acid obtained with this method were similar to those obtained by the standard additions method.     

Poly(ethylene glycol)-based stable isotope labeling reagents for the quantitative analysis of low molecular weight metabolites by LC-MS

Stable isotope labeling (SIL) in combination with liquid chromatography-mass spectrometry is one of the most widely used quantitative analytical methods due to its sensitivity and ability to deal with extremely complex biological samples. However, SIL methods for metabolite analysis are still often limited in terms of multiplexing, the chromatographic properties of the derivatized analytes, or their ionization efficiency. Here we describe a new family of reagents for the SIL of primary amine-containing compounds based on pentafluorophenyl-activated esters of 13C-containing poly(ethylene glycol) chains (PEG) that addresses these shortcomings. A sequential buildup of the PEG chain allowed the introduction of various numbers of 13C atoms opening extended multiplexing possibilities. The PEG derivatives of rather hydrophilic molecules such as amino acids and glutathione were successfully retained on a standard C18 reversed-phase column, and their identification was facilitated based on m/z values and retention times using extracted ion chromatograms. The mass increase due to PEG derivatization moved low molecular weight metabolite signals out of the often noisy, low m/z region of the mass spectra, which resulted in enhanced overall sensitivity and selectivity. Furthermore, elution at increased retention times resulted in efficient electrospray ionization due to the higher acetonitrile content in the mobile phase. The method was successfully applied to the quantification of intracellular amino acids and glutathione in a cellular model of human lung epithelium exposed to cigarette smoke-induced oxidative stress. It was shown that the concentration of most amino acids increased upon exposure of A549 cells to gas-phase cigarette smoke with respect to air control and cigarette smoke extract and that free thiol-containing species (e.g., glutathione) decreased although disulfide bond formation was not increased. These labeling reagents should also prove useful for the labeling of peptides and other compounds containing primary amine functionalities.     

Enhancement of amino acid detection and quantification by electrospray ionization mass spectrometry

A new strategy for amino acid analysis is reported involving derivatization with an N-hydroxysuccinimide ester of N-alkylnicotinic acid (Cn-NA-NHS) followed by reversed-phase chromatography and electrospray ionization mass spectrometry (RPC-MS). Detection sensitivity increased as the N-alkyl chain length of the nicotinic acid derivatizing agent was increased from 1 to 4. N-Acylation of amino acids with the Cn-NA-NHS reagents in water produced a stable product in roughly 1 min using a 4-fold molar excess of derivatizing agent in 0.1 M sodium borate buffer at pH values ranging from 8.5 to 10. Some O-acylation of tyrosine was also observed, but the product hydrolyzed within a few minutes at pH 10. The cystine product also degraded slowly over the course of a few days from reduction of the disulfide bond to form cysteine. The retention time of Cn-NA derivatized amino acids was lengthened in reversed-phase chromatography to the extent that polar amino acids were retained beyond the solvent peak, particularly in the cases of the C3-NA and C4-NA derivatives. Complete resolution of 18 amino acids was achieved in 28 min using the C4-NA-NHS reagent. Compared to N-acylation with benzoic acid, derivatization with C4-NA-NHS increased MS detection sensitivity 6-80-fold. This was attributed to the surfactant properties of the Cn-NA-NHS reagents. The quaternary amine increased the charge on amino acid conjugates while the presence of an adjacent alkyl chain further increased ionization efficiency by apparently enhancing amino acid migration to the surface of electrospray droplets. Further modification of the Cn-NA-NHS reagents with deuterium was used to prepare coded sets of derivatizing agents. These coding agents were used to differentially code samples and after mixing carry out comparative concentration measurements between samples using extracted ion chromatograms to estimate relative peak areas of derivatized amino acids.     

Fluorine speciation analysis using reverse phase liquid chromatography coupled off-line to continuum source molecular absorption spectrometry (CS-MAS): identification and quantification of novel fluorinated organic compounds in environmental and biological samples

Driven by increasing demand for the monitoring of industrial perfluorinated compounds (PFCs), the identification of novel fluorine containing compounds (FOCs) and the tracking of organofluorine drugs and their degradation products, there is a clear need for sensitive, fluorine-specific detection of unknown FOCs. Here we report the first ever direct fluorine-specific (speciation) method; capable of individually detecting untargeted FOCs in environmental and biological samples through the application of continuum source molecular absorption spectrometry (CS-MAS) using a commercial CS-AAS. Two model FOCs (2,4,6, trifluorobenzoic acid (TFBA) and 5-fluoroindol-5-carboxylic acid (FICA)) were used, achieving fluorine-specific detection across a range of 0.1 to 300 ng/mL fluorine, corresponding to a limit of detection of 4 pg F and 5.26 nM for both compounds. Both TFBA and FICA showed a similar response to CS-MAS detection, potentially enabling the quantification of fluorine content in novel FOCs without having molecular standards available. This paper also reports the use of reverse-phase high performance liquid chromatography (RP-HPLC) coupled off-line with CS-MAS for the identification of single organofluorines in a mixture of FOCs via fraction collection. The linear range of both FOCs was determined to be from 1 to 500 ng/mL. The limits of detection of those species were just above 1 ng/mL (100 pg) and can therefore compete with targeted analytical methods such as ESI-MS. Finally, as a proof of principle the analysis of a fluoride-containing groundwater sample from Ghana demonstrated that this method can be used in the detection of novel FOCs, with identification achieved through parallel ESI-MS. Coupled HPLC-CS-MAS/ESI-MS is the first analytical methodology capable of selectively detecting and identifying novel FOCs, making possible the quantification of all fluorine containing compounds in one sample. This is the necessary analytical requirement to perform fluoronomics.     

制丝加料前后非挥发性有机酸和高级脂肪酸变化分析

应用中甲酯衍生化和气相色谱法,分析烟叶样品的非挥发性有机酸和高级脂肪酸的含量,重复性较好.且分析时间较短。共鉴定制丝加料前后的6种非挥发性有机酸和4种高级脂肪酸的含量,结果表明:加料后,非挥发性有机酸和高级脂肪酸的含量均有不同程度的上升。     

Characterization of archaeological beeswax by electron ionization and electrospray ionization mass spectrometry

To better detect and identify beeswax in ancient organic residues from archaeological remains, we developed a new analytical methodology consisting of the analysis of (i) the trimethylsilylated organic extract by GC/MS and (ii) the crude extract by ESI-MS. Selective scanning modes, such as SIM or MRM, permit separate quantification of each chemical family (fatty acids, monoesters, monohydroxyesters, and diesters) and allow an improvement in sensitivity and selectivity, allowing the crude extract to be treated without further purification. GC/MS (SIM) was revealed to be a powerful method for the detection of components, with a detection limit down to a total lipid extract in the range of approximately 50 ng in a complex matix, such as archaeological degraded material, whereas ESI-MS/MS is instead used for the detection of nonvolatile biomarkers. Identification by GC/MS (SIM) and ESI-MS/ MS (MRM) of more than 50 biomarkers of beeswax in an Etruscan cup at the parts-per-million level provides the first evidence for the use of this material by the Etruscans as fuel or as a waterproof coating for ceramics.