共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
ZSD热风炉在安钢300m^3高炉上的应用 总被引:1,自引:0,他引:1
安钢1号高炉(300m^3)内燃式热风炉进行技术改造时,采用了ZSD热风炉。该热风炉具有结构简单、气体分布均匀、蓄热能力大等特点。安钢1号高炉1年来的生产实践表明,该热风炉工作状况正常,1994年2月份风温月平均达到了1093℃。 相似文献
3.
高温内燃式热风炉的发展及特征 总被引:6,自引:1,他引:5
霍戈文式热风炉自1969年问世以来,迄今已在十几个国家的几十座高炉推广应用。该热风炉具有结构合理、投资省、占地少、热损失小、风温高、寿命长等优点。武汉钢铁设计研究院运用霍戈文式热风炉的设计思想,应用自己研制开发的组合砖技术成功地为武钢5号高炉和4号高炉设计了高温内燃式热风炉。现在武钢4号、5号高炉的热风炉在单烧高炉煤气的条件下平均风温达1150℃。 相似文献
4.
Conclusions The Chusovoi Metallurgical Plant has now accumulated a significant amount of experience in making its own sinter within a
broad range of basicities—from 1.03 through 3.81.
In order to evaluate sinter and other materials as substitutions for limestone, it would be expedient to express fluxing ability
as the percentage concentration of CaO or the sum CaO+MgO in the material minus the percentage of these oxides used to flux
SiO2. Given sinters of equal basicity, their fluxing ability depends on their content of SiO2 and the basicity of the blast-furnace slag.
To prepare for the possibility of having to melt unfluxed Kachkanar pellets in the blast furnaces, it would be best to organize
the local production of high-basicity sinter.
Chusovoi Metallurgical Plant. Translated from Metallurg, No. 7, pp. 13–14, July, 1999. 相似文献
5.
6.
提高高炉热风炉热风温度对于降低能耗、实现经济绿色发展具有重要意义。以某2 500 m3高炉热风炉为原型,建立了顶燃式热风炉的三维数学模型。采用Fluent软件对热风炉在“两烧一送”工况下烧炉和送风的过程进行多次连续性仿真模拟。选用可实现的k-ε湍流模型、P-1辐射模型和涡流耗散模型分别应用于模拟流体的流动、辐射传热以及化学燃烧。在此基础上,进一步分析了混烧不同比例的焦炉煤气对热风炉内部温度场和热风温度的影响。模拟结果表明,在这两个工作过程中,热风炉蓄热室内部温度相差200 ℃,这是冷风在蓄热室中所吸收的热量;混烧1%和2%焦炉煤气均可以提高热风平均温度20 ℃。 相似文献
7.
介绍了首钢京唐钢铁厂5500 m3高炉BSK顶燃式热风炉的设计创新。优化集成了特大型顶燃式热风炉工艺;研究开发了助燃空气两级高温预热技术和顶燃式热风炉高效陶瓷燃烧器。根据顶燃式热风炉特性设计了合理的拱顶和陶瓷燃烧器结构;采用高效格子砖,优化了蓄热室的热工参数与结构,确定了合理的热风炉蓄热面积。优化热风炉炉体内衬设计;采用了有效的防止热风炉炉壳晶间应力腐蚀的技术措施。根据蓄热室传热计算,合理配置了热风炉炉体耐火材料,提高了耐火材料技术性能。优化热风管道系统耐火材料结构设计,使热风管道系统合理化并满足1300 ℃高风温的要求。高炉投产后热风温达到设计水平,实现月平均风温1300 ℃。 相似文献
8.
卡卢金热风炉是一种现代蓄热式高炉热风炉。相对于内燃式和外燃式热风炉而言,卡卢金顶燃式热风炉淘汰了传统意义上的燃烧室(俗称"燃烧井"),被称为"无燃烧井"热风炉,又叫"顶燃式热风炉",真正实现了高炉煤气的充分燃烧和高风温的目标。该炉凭借其高风温、低投资、长寿命的特点,已经成为炼铁行业中广泛应用的热风炉之一。独立的设计和技术服务使其在世界范围内赢得了高品质的称赞。使用20mm孔径格子砖的热风炉已经成为新一代卡卢金热风炉的标志。从高炉热风炉的发展史,技术改革等方面,阐述了卡卢金热风炉在燃烧器设计,格子砖技术,炉箅子结构,余热利用等方面的优势,并介绍了在中国和国际市场的应用业绩。 相似文献
9.
首钢高炉热风炉高风温技术进步 总被引:1,自引:0,他引:1
本文叙述首钢高炉热风炉现状和技术进步,说明首钢高炉热风炉向大型、高风温方向发展。通过分析首钢北京地区、首秦和迁钢等高炉热风炉投产以来的风温变化,阐明首钢全烧高炉煤气热风炉采用高温空气燃烧预热技术实现风温1250℃。利用仿真和冷态试验等手段从理论和机理上研究了首钢现有不同高炉热风炉结构的流场和温度分布特征,指出了顶燃式和内燃式热风炉存在的问题。首钢高风温试验研究采取加强系统监测、操作制度优化和改善原燃料条件等措施,实现了1250~1280℃的风温。该试验研究结果将在首钢迁钢3#高炉、京唐大型高炉上进一步实施,为国内外高炉提高风温研究提供参考。 相似文献
10.
11.
顶燃式热风炉主要应用于冶金行业的高炉系统,为高炉提供高风温的热空气。在许多工业应用环境中,除加热空气外也有加热煤气的需求。本文分析了顶燃式热风炉技术在煤气加热中的应用情况。由于加热介质变为瓦斯气体,需要对热风炉各个组成系统做针对性的改进。详细介绍了顶燃式热风炉在加热煤气时所做的创新和改进,为冶金装备的拓展使用提供了成功的经验。 相似文献
12.
Conventional stoves with a blast temperature of about 1000°C were previously used to heat the blast for the blast furnaces
at the metallurgical plant in Koshitse, Slovakia. An increase in the useful volume of these furnaces made it necessary to
heat a larger volume of blast and increase its temperature. A new stove with a self-supporting mushroom-shaped dome was built.
The stove was provided with a checkerwork made of high-quality refractories and a lining with keyed joints was installed in
the combustion chamber. The combustion products from the combustion chamber are discharged in the vertical direction. The
lining of the dome is not connected to the outside lining of the stove.
__________
Translated from Metallurg, No. 7, pp. 41–44, July 2006. 相似文献
13.
14.
15.
彭梦珑 《金属材料与冶金工程》1999,(3)
用分析的方法,对冷水江钢铁总厂9#热风炉的能量利用情况进行了量与质的分析,找出了该热风炉能量损失的主要部分是燃烧过程、排烟及传热过程。总结出该热风炉节能的主要方向和途径是:降低空气过剩系数,提高助燃空气的入炉温度和降低排烟温度。 相似文献
16.
Conclusions To improve the methods used in smelting, it is recommended that the 1033-m3 blast furnace at the Chusovoi plant be equipped with an efficient automation system based on the use of programmable controllers
and the “Smelter Adviser” expert system. This will make it possible to more reliably evaluate the current state of the smelting
operation and to use efficient coordinated control actions. The anticipated effects of those actions during smelting are substantiated
by modeling. It is also possible to calculate many different generalized indices of the thermal state of the furnace and coefficients
used in factor analysis. Those indices and coefficients are needed to comparatively analyze and plan the operation of the
blast furnace. The computer-based “Smelter Adviser” expert system can also be used as a trainer to teach blast-furnace operators
new techniques for conducting a heat with the use of information technologies and computer technology.
Ural State Technical Institute, Chusovoi Metallurgical Plant, and AOZT “NTF IPM”. Translated from Metallurg, No. 7, pp. 21–26,
July, 1999. 相似文献
17.
简述了近年来鞍钢高炉热风炉的发展状况,介绍了鞍钢热风炉采用的高温空气燃烧技术、烘炉和保温等技术,同时还介绍了热风炉高辐射微纳米涂料技术、热风炉无波动换炉技术等高风温新技术在热风炉上的应用情况。 相似文献
18.
论述了高炉煤气富化分离对提高热风炉理论燃烧温度的重要意义。计算了PSA法处理后的富化高炉煤气对不同热风炉理论燃烧温度提高的作用 ,为确定采用 PSA法富化分离高炉煤气进行老厂技术改造的可行方案奠定了基础 相似文献
19.
为开发5500m3高炉BSK顶燃式热风炉技术,对顶燃式热风炉的燃烧机制和燃烧特性进行了研究。采用CFD数学仿真模拟研究了BSK顶燃式热风炉环形陶瓷燃烧器的燃烧机制,解析了顶燃式热风炉燃烧室内气体的混合、流动以及燃烧过程,计算分析了顶燃式热风炉燃烧过程的速度场、温度场以及浓度场分布。通过对实体热风炉的冷态测试,验证了CFD数学仿真计算的结果。研究结果表明,BSK顶燃式热风炉采用旋流扩散燃烧技术使燃烧过程速度场、温度场和浓度场分布均匀对称,并可以有效控制火焰长度和火焰形状,使煤气在拱顶空间内充分燃烧。速度场、温度场和浓度场的分布与煤气和助燃空气的初始分布有直接关系。通过燃烧器喷嘴结构优化设计可以显著提高空气与煤气混合的均匀性,改善燃烧室内浓度、温度分布以及火焰形状。 相似文献
20.
Metallurgist - A gas mixing station for admixing natural gas to the blast-furnace gas for heating the hot-blast stove was developed and put into commercial operation at BF No. 2 of EVRAZ ZSMK. 相似文献