Insensitive current-mode universal filter using dual output current conveyors

A new current-mode universal filter with single input and three outputs employing only three dual output current conveyors and five grounded passive elements is presented. The proposed filter realizes three filter functions simultaneously, all at high impedance outputs. No component matching is required and all the passive and active sensitivities are low. Furthermore, the filter can also realize the notch and all-pass responses. Orthogonal control of the natural angular frequency and the quality factor is achieved.     

Insensitive high-output impedance minimum configuration SITO-type current-mode biquad using dual-output current conveyors and grounded passive components

This paper presents a high-output impedance current mode single-input and three-outputs (SITO)-type multifunction filter which employs three dual-output current conveyors to simultaneously realize low-pass, high-pass and band-pass responses. The proposed circuit uses grounded-virtually grounded passive components (which makes the circuit ideal for integration and tuning). Moreover, it has low active and passive component sensitivities and does not require critical matching conditions and cancellation constraints.     

Insensitive current-mode bandpass filter implemented from two current conveyors

Two configurations for second order bandpass filters with current transfers are introduced. The circuits, which exhibit reduced values for the active and passive insensitivities, only use four passive components and necessitate two current conveyors. SPICE simulated results, which confirm the theoretical analysis, are given and discussed for current conveyors implemented in a translinear form.<>     

High output impedance current-mode universal filter employing dual-output current-controlled conveyors and grounded capacitors

A novel current-controlled two-input three-output current-mode universal filter, which employs only three dual-output controlled-controlled current conveyors (DOCCCIIs) and two grounded capacitors, is presented in this paper. The proposed configuration provides inverting-type lowpass, noninverting-type lowpass, inverting-type bandpass, noninverting-type bandpass, highpass, bandstop and allpass current responses at a high impedance terminal, which enable easy cascadability. The filter also offers an independent electronic control of the natural frequency ω_o and the parameter ω_o/Q through adjusting the bias current of the DOCCCII. No critical matching condition is required for realizing all the filter responses, and all the incremental parameter sensitivities are low. The performances of the proposed circuit are simulated with PSPICE to confirm the presented theory.     

Current-tunable current-mode multifunction filter based on dual-output current-controlled conveyors

In this paper, a current-tunable current-mode multifunction filter with two inputs and two outputs employing only four dual-output current-controlled conveyors (DO-CCCIIs) and two grounded capacitors is proposed. By appropriately connecting the input and output terminals, the proposed circuit can provide lowpass, bandpass, highpass, bandstop and allpass current responses. The filter also offers an independent electronic control of the natural frequency (ω_o) and the quality factor (Q) through adjusting the bias currents of the DO-CCCIIs. No critical matching conditions are imposed for realizing all the filter responses, and all the incremental parameter sensitivities are low. The characteristics of the proposed circuit are simulated using PSPICE to confirm the theory.     

New electronically tunable current-mode universal biquad filter using translinear current conveyors

In this study, a new electronically tunable current-mode universal filter with two inputs and two outputs employing one translinear current conveyor, one translinear current conveyor with controlled current gain and two grounded capacitors is presented. The proposed circuit offers the following attractive features: realisation of low-pass, band-pass, high-pass, band-stop and all-pass current responses from the same configuration; employment of the minimum active and passive components; no requirement of component matching conditions; independent current-control of the parameters natural frequency (ω_o) and quality factor (Q); low active and passive sensitivities; and high impedance output. The characteristics of the proposed circuit are simulated using PSPICE to confirm the theory.     

Electronically tunable current-mode second-order universal filter using minimum elements

A new electronically tunable universal filter with single-input, triple-output employing only four elements (two capacitors and two negative-type second generation current controlled conveyors (CCCII)) is proposed. The proposed filter realises three basic filter functions simultaneously: lowpass, highpass and bandpass. The validity of the proposed filter is verified through PSPICE simulations.     

Novel versatile insensitive universal current-mode biquad employing two second-generation current conveyors

A new universal current-mode biquad with two inputs and three outputs or three inputs and two outputs using only two second-generation current conveyors and four grounded/virtual-grounded passive elements is proposed. The proposed circuit has the following advantages: simultaneous realization of five generic current-mode filter signals from the same configuration; no requirements of any cancellation constraints; employment of two grounded capacitors ideal for integrated circuit implementation; employment of two grounded/virtually grounded resistors suitable for voltage control; orthogonal adjustment of ω₀/Q and ω₀ through two separate grounded/virtually-grounded resistors; high output impedance good for cascadability for the current-mode circuits; and low active and passive sensitivities.     

Quadrature oscillator and universal filter based on translinear current conveyors

This paper presents quadrature oscillator and universal filter based on translinear current conveyors. The proposed circuit can realize as a quadrature oscillator or a universal filter without changing the circuit topology. When it works as a quadrature oscillator, four quadrature current outputs and two quadrature voltage outputs can be obtained. The condition and frequency of oscillation of oscillator can be controlled orthogonally and electronically. When it works as a universal filter, low-pass, band-pass, high-stop, band-stop, and all-pass filtering functions can be obtained simultaneously. The natural frequency and quality factor of filters can be controlled orthogonally and electronically. The proposed topology is simulated using PSPICE simulators and experimental results are also used to confirm workability of new circuit.     

Low component current-mode universal filter

A low component current-conveyor based current-mode universal filter with one input and three outputs is presented. The filter can simultaneously realise lowpass, highpass and bandpass responses. Realisation of notch and allpass responses does not require additional active elements. The proposed circuit enjoys low active and passive sensitivities     

Comment on "Electronically tunable current-mode second-order universal filter using minimum elements"

This comment, relates to a recently published paper by M. Sagbas and K. Fidanboylu (see ibid., vol.40, p.2-4, 2004) which presents a current-mode second-order universal filter for realising lowpass, bandpass and highpass responses. This filter employs two second-generation current controlled conveyors (CCCIIs) and two capacitors. It is shown here that this circuit is not new, simply derived from another filter proposed by S. Ozoguz and C. Acar (see ibid., vol.33, p.948-9, 1997), employing CCCIIs instead of second-generation current conveyors (CCIIs).     

数字可编程的电流模式通用双二阶滤波器

本文提出了一种新的基于MOCCII的等电容和等电阻电流模式通用双二阶滤波器综合方法.通过对双二阶通用滤波传输函数进行分析将其分解成能用无损积分器实现的表达式,完成电路综合.该滤波电路包含4个有源器件、8个接地无源元件,通过控制数字可编程开关在输出端得到电流模式二阶低通、高通、带通、带阻和全通五种滤波功能.电路有很低无源灵敏度.文中对滤波器进行了PSPICE模拟验证.     

Signal limitations of the current-mode filters employing current conveyors

It is well known that second-generation current conveyors (CCII) are widely used for the realization of second-order current-mode universal filters. A filter with high-quality factor (Q) and gain constant (K) suffers from various signal swing restrictions especially at its angular resonance frequency (ω₀). This is due to the terminal voltages of the CCIIs limited by the power supply voltages and maximum allowable terminal currents of the CCIIs. In this paper, signal limitations of the CCII-based current-mode filters are investigated in detail. A filter example is given to exhibit the signal limitations of a universal current-mode filter. The time-domain and frequency-domain results of the proposed filter are also given to verify the theoretical analysis.     

Insensitive grounded-capacitor simulation of grounded inductors using current conveyors

Two new schemes for grounded-inductor simulation with single grounded capacitors using the second-generation current conveyors (c.c. II) are reported. The realised inductors L and their quality factors Q can be independently adjusted and hence are suitable for high-quality applications. L and Q are shown to be quite stable and are practically insensitive to the changes in the active c.c. II parameters.     

Versatile current-mode universal biquadratic filter using DO-CCIIs

In this article, a new three-input and three-output versatile current-mode universal biquadratic filter is proposed. The circuit employs three dual-output current conveyors (DO-CCIIs) as active elements together with three grounded resistors and two grounded capacitors. The proposed configuration exhibits low-input impedance and high-output impedance which is important for easy cascading in the current-mode operations. It can be used as either a single-input and three-output or three-input and two-output circuit. In the operation of single-input and three-output circuit, the lowpass, bandpass and bandreject can be realised simultaneously, while the highpass filtering response can be easily obtained by connecting appropriated output current directly without using addition stages. In the operation of three-input and two-output circuit, all five generic filtering functions can be easily realised by selecting different three input current signals. The filter permits orthogonal controllability of the quality factor and resonance angular frequency, and no component matching conditions or inverting-type input current signals are imposed. All the passive and active sensitivities are low. HSPICE simulation results based on using TSMC 0.18?µm 1P6M CMOS process technology and supply voltages ±0.9?V to verify the theoretical analysis.     

一种新颖的电流模式双二阶OTA-C滤波器设计

提出了一种新颖OTA-C实现的电流模式双二阶通用滤波器。该滤波器具有三个输入端和一个输出端,通过选择不同的输入信号即能实现低通、高通、带通、带阻和全通五种滤波器功能。电路结构简单、中心频率和品质因数可调,灵敏度低,均为0.5。理论分析和SPICE仿真表明所提电路方案正确可行。     

New current-mode current-controlled universal filter with single input and three outputs

In this study, a new current-mode current-controlled universal filter with single input and three outputs is presented. The proposed circuit uses single-output current controlled conveyors (CCCIIs) and can simultaneously realize lowpass, bandpass and highpass filter functions all at high impedance outputs. Realization of notch and allpass responses does not require additional active elements. The circuit enjoys independent current-control of the parameters ω₀ and ω₀/Q without disturbing the gains of the lowpass, bandpass and highpass filters. Both its active and passive sensitivities are low.     

Tunable versatile current-mode universal filter based on plus-type DVCCs

This paper presents a new tunable versatile current-mode universal filter with four inputs and three outputs. The proposed configuration employs three plus-type differential voltage current conveyors, two grounded capacitors and three grounded resistors. Its high impedance outputs enable easy cascading in current-mode operation. The circuit can be used as either a single-input and three-output or four-input and two-output. In the operation of single-input and three-output circuit, the bandpass, highpass and bandreject filtering responses can be realized simultaneously. In the operation of four-input and two-output circuit, both inverting and non-inverting type lowpass, bandpass, highpass, bandreject and allpass filtering responses can be simultaneously realized by selecting different four input current signals. The filter permits orthogonal controllability of the quality factor and resonance angular frequency by adjusting the grounded passive components. No component matching condition is required for realizing all the filter responses, and all the passive and active sensitivities are low. HSPICE simulation results based on using TSMC 0.18 μm 1P6M CMOS process technology and supply voltages ±0.9 V to verify the theoretical analysis.     

Comment: universal voltage-mode filter with three inputs and oneoutput using three current conveyors and one voltage follower

This Comment relates to our recently published Letter (1994) which presents a universal voltage-mode filter with three inputs and one output using three current conveyors, voltage follower, two capacitors and three resistors. It is shown that if we discard one current conveyor from the proposed universal filter configuration, then we obtain a simpler universal voltage-mode filter with three inputs and one output