Lightweight,robust, porous heterocyclic para-aramid aerogel hollow fibers for multifunctional applications

In nature, many fibers with warmth-retention properties, such as the hair of polar bears and rabbits, both have a hollow cross-section structure. The static air in fiber cavities can effectively inhibit heat conduction and serve as an effective thermal insulator. In this work, the high-performance heterocyclic para-aramid polymer was selected as the spinning solution, and aerogel hollow fiber was prepared by coaxial wet spinning and freeze-drying techniques. The effects of spinning solution concentration and lyophilized solvent on the micromorphology, mechanical properties, and specific surface area of heterocyclic para-aramid aerogel hollow fiber (HPAAHF) were systematically studied. The produced HPAAHF possessed excellent mechanical properties (tensible strength ~3.85 MPa), high specific surface area (~ 260.90 m² g⁻¹), and lightweight advantages. The thermal conductivity of HPAAHF was only 0.0278 W m⁻¹ K⁻¹, indicating its excellent thermal insulation properties. The aerogel fabric exhibited outstanding flame retardancy properties, with a total heat release of only 0.7 MJ m⁻² in the cone calorimetric experiment, making it a self-extinguishing fabric. In addition, phase change material was injected into the hollow structure to obtain aerogel-phase change material composite fibers, which exhibited great energy storage prospects. As a result, the high-performance heterocyclic para-aramid polymer-based aerogel hollow fiber was successfully prepared and had multifunctional applications in thermal insulation, flame retardancy, and heat energy storage fields.     

Tailoring Chitosan/LTA Zeolite Hybrid Aerogels for Anionic and Cationic Dye Adsorption

Chitosan (CS) is largely employed in environmental applications as an adsorbent of anionic dyes, due to the presence in its chemical structure of amine groups that, if protonated, act as adsorbing sites for negatively charged molecules. Efficient adsorption of both cationic and anionic dyes is thus not achievable with a pristine chitosan adsorbent, but it requires the combination of two or more components. Here, we show that simultaneous adsorption of cationic and anionic dyes can be obtained by embedding Linde Type A (LTA) zeolite particles in a crosslinked CS-based aerogel. In order to optimize dye removal ability of the hybrid aerogel, we target the crosslinker concentration so that crosslinking is mainly activated during the thermal treatment after the fast freezing of the CS/LTA mixture. The adsorption of isotherms is obtained for different CS/LTA weight ratios and for different types of anionic and cationic dyes. Irrespective of the formulation, the Langmuir model was found to accurately describe the adsorption isotherms. The optimal tradeoff in the adsorption behavior was obtained with the CS/LTA aerogel (1:1 weight ratio), for which the maximum uptake of indigo carmine (anionic dye) and rhodamine 6G (cationic dye) is 103 and 43 mg g⁻¹, respectively. The behavior observed for the adsorption capacity and energy cannot be rationalized as a pure superposition of the two components, but suggests that reciprocal steric effects, chemical heterogeneity, and molecular interactions between CS and LTA zeolite particles play an important role.     

Chitosan-modified palygorskite: Preparation,characterization and reactive dye removal

Chitosan-modified palygorskite (CTS-modified PA) was prepared by surface grafting of PA with chitosan, and the CTS-modified PA was used as an effective adsorbent for the removal of reactive dye. The effects of various experimental parameters such as initial pH, adsorbent dosage, contact time and initial dye concentration on adsorption were investigated. The adsorption behavior of CTS-modified PA showed that the adsorption kinetics and isotherms were in good agreement with the pseudo-second-order equation and the Langmuir equation, and the maximum adsorption capacity of CTS-modified PA calculated by the Langmuir model was 71.38 mg g^− 1, which was much higher than that of the unmodified PA (6.3 mg g^− 1).     

ZnO/Cassava Starch-Based Hydrogel Composite for Effective Treatment of Dye-Contaminated Wastewater

Industrial expansion has increased the discharge of contaminated wastewater. Wastewater can be treated by adsorption with petroleum-based hydrogels but the materials are not biodegradable and therefore cause secondary toxic waste. In this work, hydrogel composites are prepared based on non-biodegradable polyacrylamide and biodegradable materials of cassava starch (CS) and poly(vinyl alcohol). The effect of CS content on the porous structure is studied. The highest water absorption capacity of 74 g g⁻¹ is obtained from a hydrogel 30 wt% of CS. Within 4 h, the hydrogel effectively adsorbs the cationic dyes methylene blue (MB) and crystal violet, and the anionic dyes congo red and reactive orange. The maximum adsorption capacity toward MB is 993 mg g⁻¹. Experimental data indicate a monolayer adsorption via chemisorption. Silica-coated ZnO photocatalyst particles are synthesized via a sol–gel method and coated on the outer surface of the hydrogel. Under sunlight, the hydrogel composite degrades almost 90% of adsorbed dye. The hydrogel composite is capable of effective photodegradation for at least three cycles under artificial UV irradiation and four cycles under sunlight, but adsorption capacity remains higher than 80% at the eighth cycle. The hydrogel composite also shows antibacterial activities, indicating an additional beneficial property for industrial wastewater treatment.     

Affinity microspheres and their application to lysozyme adsorption: Cibacron Blue F3GA and Cu(II) with poly(HEMA-EGDMA)

Lysozyme adsorption onto Cibacron Blue F3GA attached and Cu(II) incorporated poly(2-hydroxyethyl methacrylate–ethylene glycol dimethacrylate) [poly(HEMA-EGDMA)] microspheres was investigated. The microspheres were prepared by suspension polymerization. Various amounts of Cibacron Blue F3GA were attached covalently onto the microspheres by changing the initial concentration of dye in the reaction medium. The microspheres with a swelling ratio of 65%, and carrying different amounts of dye (between 1.4 and 22.5 µmol/g⁻¹) were used in the lysozyme adsorption studies. Lysozyme adsorption on these microspheres from aqueous solutions containing different amounts of lysozyme at different pH values was investigated in batch reactors. The lysozyme adsorption capacity of the dye–metal chelated microspheres (238.2 mg g⁻¹) was greater than that of the dye-attached microspheres (175.1 mg g⁻¹). The maximum lyzozyme adsorption capacities (q_m) and the dissociation constant (k_d) values were found to be 204.9 mg g⁻¹ and 0.0715 mg ml⁻¹ with dye-attached and 270.7 mg g⁻¹ and 0.0583 mg ml⁻¹ with dye–metal chelated microspheres, respectively. More than 90% of the adsorbed lysozyme were desorbed in 60 min in the desorption medium containing 0.5 M KSCN at pH 8.0 or 25 mM EDTA at pH 4.9. © 1999 Society of Chemical Industry     

Removal of Acid Green 68:1 from aqueous solutions by calcined and uncalcined layered double hydroxides

Magnesium aluminum layered double hydroxide (LDH) was synthesized by the co-precipitation method followed by calcination. The resulting materials were characterized by X-ray diffraction (PXRD) and attenuated total reflectance with Fourier transform infrared spectroscopy (FTIR/ATR) and simultaneous thermogravimetric analysis/differential scanning calorimetry coupled to mass spectrometry (TGA–DSC–MS). Calcined and non-calcined LDHs were used as adsorbents to remove azo dye Acid Green 68:1 in an aqueous solution. Adsorption experiment results indicated that calcined LDH possesses greater adsorption capacity (154.8 mg g^− 1) than non-calcined LDH (99.1 mg g^− 1). Isotherms showed that adsorption of the dye was more consistent with the Langmuir model. Kinetic experiments of calcined LDH adsorption showed that for low concentration (50, 100 and 200 mg L^− 1), the system reached the adsorption equilibrium in 1, 2, and 4 h, and for higher concentration after 10 h. The best kinetic model was the pseudo-second order. Adsorption studies also showed that the capacity for adsorption of the dye by calcinated LDH does not significantly diminish with pH level variation.     

Performance of pseudo-specific cryogel in lysozyme purification from chicken egg white

The application of cryogels for biomolecule purification has expanded due to their adsorption efficiency and operational advantages. In this study, polyacrylamide cryogels functionalized with l -phenylalanine (cryogel-Phe) via the glutaraldehyde method were designed for lysozyme adsorption. Cryogel functionalization was confirmed by Fourier-transform infrared spectroscopy and Kjeldahl analysis, indicating the immobilization of 458.65 mg_{phenylalanine} g_cryogel⁻¹. Cryogel-Phe showed high porosity (0.95) and a Young's modulus of 526.71 kPa. Thermogravimetric analysis indicated that thermal degradation occurred above 200°C. Differential scanning calorimetry and X-ray diffraction confirmed that the cryogel material was amorphous. In addition, the column presented a hydraulic permeability of 4.15 × 10⁻¹³ m², axial dispersion ranging from 10⁻⁷ to 10⁻⁶ m² s⁻¹, and a height equivalent to a theoretical plate ranging from 0.10 to 0.21 cm. The highest adsorption of lysozyme (67.65 mg g⁻¹) was obtained using sodium thiocyanate saline solution (0.025 mol L⁻¹, pH 5.0). The ability of the cryogel-Phe column to capture and purify lysozyme was confirmed by high enzymatic activity (1294.17 U ml⁻¹), purity (87.92%), purification factor (11.49), and sulphate-polyacrylamide electrophoresis gel (SDS-PAGE) electrophoresis gel.     

Study of competitive adsorption of malachite green and sunset yellow dyes on cadmium hydroxide nanowires loaded on activated carbon

Cadmium hydroxide nanowires loaded on activated carbon (Cd(OH)₂-NW-AC) was applied for removal of malachite green (MG) and sunset yellow (SY) in single and binary component systems. This novel material was characterized and identified by different techniques such as Brunauer, Emmett and Teller (BET), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis. Unique properties such as high surface area (>1271 m² g⁻¹) and low pore size (<35 Å) and average particle size lower than 50 Å in addition to high reactive atom and presence of various functional groups make it possible for efficient removal of these two dyes. In the single component system in this study, maximum adsorption capacity of 80.6 for SY and 19.0 mg g⁻¹ for MG at 25 °C was reported. The Langmuir model had very well fit with the experimental data (R² > 0.996). A better agreement between the adsorption equilibrium data and mono-component Langmuir isotherm model was found. The kinetics of adsorption for single and binary mixture solutions at different initial dye concentrations were evaluated by the nonlinear first-order and second-order models. The second-order kinetic model had very well fit with the dynamical adsorption behavior of a single dye for lower and higher initial dye concentrations. SY and MG without spectra overlapping were chosen and analyzed with high accuracy in binary solutions. The effect of multi-solute systems on the adsorption capacity was investigated. The isotherm constants for SY and MG were also calculated in binary component systems at concentrations within moderate ranges, the Langmuir isotherm model satisfactorily predicted multi-component adsorption equilibrium data. The competitive adsorption favored the SY in the A mixture solution (both SY and MG concentration at 10 mg L⁻¹) and B mixture solution (25 mg L⁻¹ of SY and 10 mg L⁻¹ of MG). Also, in both cases, kinetic data was fairly described by two-step diffusion model. An endothermic and spontaneous nature for the adsorption of the dyes studied were shown from thermodynamic parameters in single and binary component systems.     

Removal behavior and mechanism of silver from low concentration wastewater using cellulose aerogel modified by thiosemicarbazide

Due to the low concentration of silver in water, most of the cellulose adsorbents exhibited low removal efficiency, which greatly limited their practical applications. Herein, a cellulose aerogel modified by thiosemicarbamide (CAT) was fabricated for reducing and adsorbing silver ions from low concentration wastewater. The characterization results concluded that CAT owned a three-dimensional spongy structure with many circular microspheres and a better specific surface area (19.37 m² g⁻¹), as well as the functional groups of ─C═N⁺─H and ─(C═S)─N. The static batch adsorption experiments demonstrated that CAT could reached the maximum removal percentage of 94.94% and adsorption capacity of 42.12 mg g⁻¹ under the initial concentration of Ag(I) was 15 mg L⁻¹ and the pH value was 7. Meanwhile, the adsorption of Ag(I) on CAT was second-order reaction, and the Langmuir model could better fit the adsorption process. In addition, CAT exhibited wide pH values (1–9) adaptability and excellent adsorption performance for silver through electrostatic interaction, chelation, and reduction. This study probably provides a new method as well as important experimental data and theoretical reference for the removal of silver ions and other metals.     

Functionalized N-doped interconnected carbon nanofibers as an anode material for sodium-ion storage with excellent performance

The electrochemical performance of sodium-ion battery was improved by using functionalized interconnected N-doped carbon nanofibers (FN-CNFs) as the anode. The material was synthesized with polypyrrole as precursor by a simple method. The FN-CNF electrode exhibits excellent rate capability and cycling stability, delivering a capacity of 134.2 mAh g⁻¹ at a high current density of 200 mA g⁻¹ after 200 cycles and retains a capacity of 73 mAh g⁻¹ even at an extremely high current density of 20 A g⁻¹. The superior performance can be attributed to N-doped sites and functionalized groups, which are capable of capturing sodium ions rapidly and reversibly through surface adsorption and surface redox reactions.     

Controllable synthesis of mesoporous alumina with large surface area for high and fast fluoride removal

Gamma phase of mesoporous alumina (MA) with large surface area was successfully synthesized by a facile hydrothermal method followed by thermal treatment for fluoride removal. The as-synthesized MA nanoparticles with average size of 20 nm–150 nm have ordered wormhole-like mesoporous structure. The pore size is 5 nm with a narrow distribution, and the specific surface area reaches 357 m² g⁻¹ while the bulk density is 0.45 cm³ g⁻¹. Glucose as a small-molecule template plays an important role on the morphology, surface area and pore diameter of the MA. As an ionic adsorbent for fluoride removal, the maximum adsorption capacity of MA is 8.25 mg g⁻¹, and the remove efficiency reaches 90% in several minutes at pH of 3. The Langmuir equilibrium model is found to be suitable for describing the fluoride sorption on MA and the adsorption behavior follows the pseudo-second-order equation well with a correlation coefficient larger than 0.99. The larger surface area and relatively narrow pore size of MA are believed to be responsible for improving the adsorption efficiency for fluoride in aqueous solution.     

Removal of trace boron from aqueous solution using iminobis-(propylene glycol) modified chitosan beads

In this paper, a new boron chelating chitosan based polymer with multi-hydroxyl iminobis (propylene glycol) (IBPG) functions was prepared. A cross-linked chitosan (CCTS) with 2.70 mmol g⁻¹ amine content was modified with excess amount of glycidol at pH 7 and boron chelating resin with IBPG functions (4.60 mmol g⁻¹) was obtained. The boron chelating ability of the resulting resin was investigated under different experimental conditions (pH, foreign ions). This prepared material was evaluated by FT–IR spectra and UV spectra analysis. The IBPG modified CCTS resin was demonstrated to have a boron loading capacity of 2.2 ± 0.05 mmol g⁻¹ within 45 min. Desorption and resin regeneration studies were carried out to determine the effectiveness of the synthesized resin with HCl and NaOH respectively. The adsorption test indicated that the chitosan based chelating resin with IBPG functions exhibited higher selectivity of boron (2.05 mmol g⁻¹) in the presence of foreign ions especially Fe(III).     

Highly selective CO2 capture by S-doped microporous carbon materials

S-doped microporous carbon materials were synthesized by the chemical activation of a reduced-graphene-oxide/poly-thiophene material. The material displayed a large CO₂ adsorption capacity of 4.5 mmol g⁻¹ at 298 K and 1 atm, as well as an impressive CO₂ adsorption selectivity over N₂, CH₄ and H₂. The material was shown to exhibit a stable recycling adsorption capacity of 4.0 mmol g⁻¹. The synthesized material showed a maximum specific surface area of 1567 m² g⁻¹ and an optimal CO₂ adsorption pore size of 0.6 nm. The microporosity, surface area and oxidized S content of the material were found to be the determining factors for CO₂ adsorption. These properties show that the as synthesized S-doped microporous carbon material can be more effective than similarly prepared N-doped microporous carbons in CO₂ capture.     

Synthesis of electrically conducting composite adsorbents for wastewater treatment using adsorption & electrochemical regeneration

Electrically conducting adsorbent materials called Nyex™ 1000 & 2000 have already been reported with comparatively low adsorption capacity for various organic, biologically non-degradable and toxic compounds. Two composite adsorbents called CA₁ & CA₂ were synthesized using synthetic graphite-carbon black and expanded graphite-carbon black respectively. The aim of developing the new adsorbents was to increase the adsorption capacity along with good electrical properties. The developed adsorbents were characterized using N₂ adsorption for specific surface area, Boehm surface titration for surface chemistry, bed electrical conductivity, laser size analyzer for average particle size, and scanning electron microscope (SEM) for particle morphology and shape. Then both the composite adsorbents were tested for the adsorption of acid violet 17 followed by an electrochemical regeneration. The adsorption study revealed that both the adsorbents had almost similar kinetic behavior with a significant increase in adsorption capacity for acid violet 17 (300 & 26 mg g⁻¹ respectively) when compared with the adsorption capacity of previously developed electrically conducting materials called Nyex™ 1000 & 2000 (3.5 and 9 mg g⁻¹ respectively). The composite adsorbent CA₂ was successfully electrochemically regenerated by passing an electric charge of 138 C g⁻¹ at a current density of 14 mA cm⁻² for a treatment time of 60 min, whereas, the composite adsorbent CA₁ could not be regenerated successfully. The regeneration efficiencies of CA₂ were obtained at around 120% during five adsorption–regeneration cycles. The amount of actual charge passed of 138 C g⁻¹ for achieving 100% regeneration efficiency was found to be similar with stoichiometrically calculated amount of charge. The amount of electrical energy required to oxidize each mg of adsorbed acid violet onto CA₂ (24 J mg⁻¹) was found to be significantly lower to that of Nyex™ 1000 & 2000 adsorbents (52 J mg⁻¹ & 32 J mg⁻¹ respectively).     

The aminosilane functionalization of cellulose nanocrystal aerogel via vapor-phase reaction and its CO2 adsorption characteristics

The cellulose nanocrystal (CNC) aerogel was functionalized using aminosilane via vapor-phase reaction and then the modified CNC aerogel was characterized by several techniques such as Fourier transform infrared spectroscopy, FE-SEM, and elemental analysis. Finally, the CO₂ adsorption on the aminosilane-grafted CNC aerogel was featured using a dual-site Langmuir adsorption model. The result showed triethylamine significantly enhanced the amine loading, being 7.06 mmol g⁻¹ at 120°C. The primary amine groups in the aminosilane survived the vapor-phase reaction. The amine groups were homogeneously distributed inside the aerogel due to its porous structure. The dual-site Langmuir model could well describe its CO₂ sorption characteristics. The adsorption capacity was up to 2.57 mmolCO₂ g⁻¹ at 25°C and 101.33 kPa, of which the chemisorption entirely dominated, and it decreased only 3%–4% after six runs. Therefore, these features positively suggested the vapor-phase reaction provided a new and feasible method to functionalize CNC aerogel for the capture of CO₂.     

Polymer-derived mesoporous Ni/SiOC(H) ceramic nanocomposites for efficient removal of acid fuchsin

In this paper, magnetic porous Ni-modified SiOC(H) ceramic nanocomposites (Ni/SiOC(H)) were successfully prepared via a template-free polymer-derived ceramic route, which involves pyrolysis at 600 °C of nickel-modified allylhydridopolycarbosilane (AHPCS-Ni) precursors synthesized by the reaction of allylhydridopolycarbosilane (AHPCS) with nickel(II)acetylacetonate (Ni(acac)₂). The resultant Ni/SiOC(H) nanocomposites are comprised of in-situ formed nanoscaled Ni socialized with small amounts of NiO and nickel silicides embedded in the amorphous SiOC(H) matrix. The materials show ferromagnetic behavior and excellent magnetic properties with the saturation magnetization in the range of 1.71–7.08 emu g⁻¹. Besides, the Ni/SiOC(H) nanocomposites are predominantly mesoporous with a high BET surface area and pore volume in the range of 253–344 and 0.134–0.185 cm³ g⁻¹, respectively. The measured porosity features cause an excellent adsorption capacity towards a template dye acid fuchsin with the adsorption capacity Q_t at 10 min of 80.7–85.8 mg g⁻¹ and the Q_e at equilibrium of 123.8–129.8 mg g⁻¹.     

Graphene oxide–tripolyphosphate hybrid used as a potent sorbent for cationic dyes

Graphene oxide–tripolyphosphate material (GPM) was synthesized through an ethanolamine (EA) mediated graphene oxide (GO) self-assembly. The synthesis route to GPM is simple and benign. GPM was composed of GO nanosheets as building blocks and the tripolyphosphate as cross-linkers and chelators of cations in solutions. GPM showed higher potency for adsorption of cationic dyes than anionic dyes, and the adsorption process was through electrostatic and π–π interactions. Adsorption was spontaneous and exothermic, and the adsorption capacity of GPM for cationic dyes (>2540 mg g⁻¹) far exceeded those reported in literature for GO materials.     

Simple self-assembly of SnS2 entrapped graphene aerogel and its enhanced lithium storage performance

In this work, SnS₂ nanoplates entrapped graphene aerogel has been successfully prepared by simple self-assembly of reduced graphene oxide obtained through mild chemical reduction. Structural and morphological investigations demonstrated that SnS₂ nanoplates are highly dispersed in the three dimensional (3D) porous graphene matrix. When served as anode material for lithium-ion batteries, the electrochemical properties of SnS₂/graphene aerogel (SnS₂/GA) were evaluated by galvanostatic discharge–charge tests, cyclic voltammetry and impedance spectroscopy measurement. Compared with pristine SnS₂, the SnS₂/GA nanocomposite achieved a much higher initial reversible capacity (1186 mAh g⁻¹), superior cyclic stability (1004 mAh g⁻¹ after 60 cycles, corresponding to 84.7% of the initial reversible capacity), as well as better rate capability (650 mAh g⁻¹ at a current density of 1000 mA g⁻¹). This significantly improved lithium storage performance can be attributed to the good integration of SnS₂ nanoplates with 3D porous graphene network, which can not only provide much more active sites and easy access for Li ions intercalation, but also prevent the aggregation of SnS₂ nanoplates and facilitate fast transportation of Li ions and surface electrons during the electrochemical process.     

Enhanced selective adsorption of cation organic dyes on polyvinyl alcohol/agar/maltodextrin water-resistance biomembrane

In this study, we designed a novel hydrogel composite membrane based on the combination of polyvinyl alcohol (PVA), agar, and maltodextrin through a facile solution-casting router. From Fourier-transform infrared spectroscopy, contact angle, scanning electron microscopy, and swelling analyses, the formation of hydrogen bonds between surface functional groups of PVA, agar, and maltodextrin was confirmed. As a result, the PVA/agar/maltodextrin membranes exhibited a more hydrophobic nature compared with pure PVA. The thermal stability and integrity of such obtained composite membranes were also elucidated by the evaluation of thermogravimetric analysis and mechanical behavior. Besides, the composite membrane exhibited high selective adsorption for cationic dyes, namely 20.2 mg g⁻¹ for methylene blue and 19.17 mg g⁻¹ for crystal violet at initial dye concentration of 100 mg/L, an adsorbent dosage of 0.1 g, contact time of 180 min, and solution pH 7, while anionic dyes such as congo red and methyl orange are approximately zero. The adsorption kinetics and isotherm of the as-prepared composite membranes were well fitted to the pseudo-second-order and Temkin model. The effect of factors, including contact time, solution pH, PVA content, and initial dye concentration on the adsorption capacity of the as-prepared composite membrane was also investigated in detail. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48904.     

The production of rGO/ RuO2 aerogel supercapacitor and analysis of its electrochemical performances

In this study, ruthenium was bonded to the reduced graphene oxide in an ultrasonic bath. The aerogel of the mixture was produced at −78 °C. Structural characterization of aerogels was done with XRD and FTIR, surface characterization was performed with STEM, and elemental analysis was conducted by EDX analysis. The produced aerogel composites were transformed into electrodes on conductive Nickel foam. IviumStat, a potentiostat/galvanostat device, was used for the electrochemical characterization of the symmetrical supercapacitors. According to CV voltammograms, rGO/RuO₂ aerogels' highest specific capacitance was calculated as 328.6 F g⁻¹ at a potential scan rate of 5 mV s⁻¹. The assembled rGO/RuO₂ aerogel-based supercapacitor cell offered a high energy density value of 31.1 W h kg⁻¹ even at the power density of 8.365 kW kg⁻¹; this is comparable to that of lead-acid and nickel-metal hybrid batteries.