共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
针对车道线保持控制中存在的不确定性扰动及时滞问题, 提出一种自校正滑模控制方法. 该方法利用线性矩阵不等式理论给出滑动模态存在的充分条件; 系统在滑动模态下对于存在的非匹配不确定性扰动以及状态时滞具有完全不变性. 接下来引入双极性sigmoid函数代替常规滑模控制中的符号函数并设计自校正律; 在自校正律的作用下使sigmoid函数的边界层厚度以及切换增益可根据系统状态进行自适应调节, 从而达到削弱控制器输出抖振的目的. 基于Lyapunov理论对该方法的稳定性进行了证明, 最后通过车辆的车道线保持仿真实验对该控制方法的可行性及有效性进行了验证. 相似文献
4.
时滞离散系统最优输出跟踪控制的灵敏度法 总被引:1,自引:1,他引:0
针对具有有限时间二次型性能指标的时滞离散系统,研究了最优输出跟踪控制问题.通过引入一个灵敏度参数,将原最优输出跟踪控制问题转化为不含超前项和时滞项的一族两点边值问题.得到的最优输出跟踪控制律由状态向量的线性解析函数和伴随向量级数形式的补偿项组成,其解析函数由一次性求解R iccati矩阵差分方程和矩阵差分方程得到,补偿项由求解伴随向量差分方程的递推公式得到.仿真结果表明了该方法的有效性. 相似文献
5.
针对存在外部干扰、转动惯量矩阵不确定以及执行器故障的航天器姿态跟踪控制问题,本文提出了基于自适应快速非奇异终端滑模的有限时间收敛故障容错控制方案.通过引入能够避免奇异点,且具有有限时间收敛特性的快速非奇异终端滑模面,设计了满足多约束条件有限时间收敛的姿态跟踪容错控制律,利用参数自适应方法使控制器不依赖转动惯量和外部干扰的上界信息.Lyapunov稳定性分析表明:在存在外部干扰、转动惯量矩阵不确定以及执行器故障等约束条件下,本文设计的控制律能够保证闭环系统的快速收敛性,而且对执行器故障具有良好的容错性能.数值仿真校验了该控制律在姿态跟踪控制中的优良性能. 相似文献
6.
具有结构不确定性的时滞系统的最优非脆弱保性能控制 总被引:3,自引:2,他引:3
对一类具有结构不确定性的线性时滞系统的最优非脆弱保性能控制问题进行了研究.以线性矩阵不等式的形式给出了设计非脆弱保性能控制律的一个充分条件.然后给出了在使性能指标上界最小的意义下,最优非脆弱保性能控制律的设计算法.最后用例子演示了方法的有效性. 相似文献
7.
针对永磁直驱同步风力发电机传统PI矢量控制方式鲁棒性差的问题,提出一种非奇异快速终端滑模控制方法.针对滑模控制中的抖振问题,在指数趋近律中引入光滑连续的双曲正切函数代替符号函数;针对滑模控制中的外部扰动问题,采用扩张状态观测器进行在线估计和补偿,得出基于扩张状态观测器的非奇异快速终端滑模控制器.使用Matlab/Sim... 相似文献
8.
张言军 《中国科学:信息科学》2023,(3):535-549
本文研究了一类具有高阶输入–输出时延的非仿射非线性离散不确定系统的自适应输出跟踪控制问题,提出了一种基于隐函数的自适应输出反馈输出跟踪控制方案.该方案主要解决了两个技术问题:一是构造了基于未知参数估计和未来时刻信号估计的隐函数方程解的自适应控制律,解决了因系统高阶时延导致的控制律因果矛盾问题并实现了闭环稳定和渐近输出跟踪;二是针对非仿射非线性控制律难求解问题,提出了基于迭代解的解析自适应控制律,实现了闭环稳定和实用输出跟踪.最后仿真研究证实了所提出控制方案的有效性. 相似文献
9.
李飞 《自动化与仪器仪表》2013,(2)
针对一类离散的不确定切换模糊组合系统,利用平行分布补偿算法(PDC)给出分散切换模糊控制器的设计方法,利用多Lyapunov函数方法,给出使系统稳定且H∞控制问题可解的矩阵不等式条件,并给出分散切换律设计.仿真结果表明方法的有效性. 相似文献
10.
11.
S. Shaw 《Journal of Computer Assisted Learning》1993,9(2):93-99
Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained. 相似文献
12.
European Community policy and the market 总被引:1,自引:0,他引:1
C. Lloyd 《Journal of Computer Assisted Learning》1993,9(2):86-91
Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven. 相似文献
13.
融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。 相似文献
14.
Wayne O’Brien Author Vitae 《Journal of Systems and Software》2008,81(11):1997-2013
Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them. 相似文献
15.
This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives. 相似文献
16.
Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what
is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic
sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and
its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of
an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify
robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can
or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest.
This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January
31–February 2, 2008 相似文献
17.
David Poole 《Computational Intelligence》1989,5(2):97-110
Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given. 相似文献
18.
Watts S. Humphrey 《Annals of Software Engineering》2002,14(1-4):39-72
This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)SM and Team Software Process (TSP){SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical. 相似文献
19.
基于复小波噪声方差显著修正的SAR图像去噪 总被引:4,自引:1,他引:3
提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。 相似文献