Niobium‐Doped Titania Photocatalyst Film Prepared via a Nonaqueous Sol‐Gel Method

Niobium‐doped Titanium dioxide (Nb:TiO₂) transparent films were successfully deposited on glass substrates using a non‐aqueous sol‐gel spin coating technique. The effect of Nb concentration on the structural and photocatalytic properties of Nb:TiO₂ films was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV visible spectroscopy. The films with 12 at.% (atomic percent) Nb doped TiO₂ showed excellent photocatalytic activity through 97.3% degradation of methylene blue (MB) after 2 h of UV irradiation.     

Improved photochromic and fatigue performance of (E)‐dicyclopropylmethylene‐(2,5‐dimethyl‐3‐furylethylidene)‐succinicanhydride doped in polyurethane thin film

Improved photochromic properties and fatigue performance of (E)‐dicyclopropylmethylene‐(2,5‐dimethyl‐3‐furylethylidene)‐succinicanhydride doped in polyurethane thin film were discussed in this study. Fulgide 1‐E doped in polyurethane polymer films was heated at various annealing temperatures. Upon irradiation with UV light (366 nm), fulgide 1‐E undergoes a conrotatory ring closure to the pink‐colored closed form 1‐C . The latter color was switched back to the original color when the films were irradiated with white light. The kinetics of photocoloration and photobleaching processes was followed spectrophotometrically by monitoring the absorbance of the ring‐closed product 1‐C at its λ_max of 525 nm. The first‐order plots of photocoloration reaction show distinct linear line and the slope of which corresponding to the first‐order rate constants k. It was found that for photocoloration reaction, the rate constant of the photocoloration reaction is slower than the photobleaching reaction, and both reactions decrease with increasing the annealing temperatures. It was found that there was almost complete loss of photochemical fatigue resistance of fulgide 1 doped in polyurethane polymer film irrespective of the annealing temperature. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Fabrication and transport properties of poly(N‐vinylcarbazole)‐cellulose triacetate Langmuir‐Schaefer films

Cellulose triacetate (CTA) was doped with poly(N‐vinylcarbazole) during the oxidative polymerization of N‐vinylcarbazole using ferric chloride as an initiator to form polymer blends. The blends were characterized by Fourier transform infrared and UV‐vis spectroscopy. The surface morphology was further studied using both scanning electron microscopy and transmission electron microscopy. Langmuir‐Schaefer films of the polymer blends were fabricated. The DC conductivity of the polymer films at room temperature was found to increase with an increase in CTA content up to a value of 0.001 S cm⁻¹. The temperature‐dependent DC conductivity of the polymer films studied in the range of 300–500 K shows an increase in conductivity with an increase in temperature indicating a semiconducting behavior with a negative temperature coefficient of resistivity. The apparent activation energy also showed a pronounced effect with an increase in the temperature as well as an increase in the content of CTA. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

A redox‐mediator‐doped gel polymer electrolyte applied in quasi‐solid‐state supercapacitors

Methylene blue (MB) redox mediator was introduced into polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) blend host to prepare a gel polymer electrolyte (PVA‐PVP‐H₂SO₄‐MB) for a quasi‐solid‐state supercapacitor. The electrochemical properties of the supercapacitor with the prepared gel polymer electrolyte were evaluated by cyclic voltammetry, galvanostatic charge–discharge, electrochemical impedance spectroscopy, and self‐discharge measurements. With the addition of MB mediator, the ionic conductivity of gel polymer electrolyte increased by 56% up to 36.3 mS·cm^?1, and the series resistance reduced, because of the more efficient ionic conduction and higher charge transfer rate, respectively. The electrode specific capacitance of the supercapacitor with PVA‐PVP‐H₂SO₄‐MB electrolyte is 328 F·g^?1, increasing by 164% compared to that of MB‐undoped system at the same current density of 1 A·g^?1. Meanwhile, the energy density of the supercapacitor increases from 3.2 to 10.3 Wh·kg^?1. The quasi‐solid‐state supercapacitor showed excellent cyclability over 2000 charge/discharge cycles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39784.     

Molecular weight studies of the γ‐irradiation degradation of poly(methyl methacrylate) doped with poly(p‐sulfanilamide)

The protection of some poly(methyl methacrylate) (PMMA) samples against γ rays was investigated in the absence and presence of poly(p‐sulfanilamide). Pure PMMA (without additives) and PMMA–poly(p‐sulfanilamide) blend samples were irradiated with γ rays for different exposure doses (5, 15, 25, 35, 50, 75, and 100 kGy). The viscosity‐average molecular weights were determined and thin‐layer chromatography measurements were carried out after each irradiation dose. The maximum protection against γ rays was found when 1% poly(p‐sulfanilamide) was used. The radiation chemical yield for main scission (G_s) was calculated and had lower values in the case of 1% poly(p‐sulfanilamide). The energy absorption per scission was maximum for 1% poly(p‐sulfanilamide), and this confirmed the obtained G_s data. From thin‐layer chromatography studies, it was observed that both the retention factor (R_f) values and polydispersity of the PMMA samples increased with an increasing exposure dose. The effect of γ irradiation on PMMA films doped with 1% poly(p‐sulfanilamide) was investigated with UV spectroscopy after the extraction of the additives. A change in the intensity of the absorption bands with an increasing irradiation dose was recorded. It is suggested that PMMA films doped with this type of polymer can be used as dosimeters. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effects of an oxygen‐ion beam (O+7, 100 MeV) and γ irradiation on polypyrrole films

Nanostructured polypyrrole films doped with para‐toluene sulfonic acid were prepared by an electrochemical process, and a comparative study of the effects of swift heavy ions and γ‐ray irradiation on the structural and optical properties of the polypyrrole was carried out. Oxygen‐ion (energy = 100 MeV, charge state = +7) fluence varied from 1 × 10¹⁰ to 3 × 10¹² ions/cm², and the γ dose varied from 6.8 to 67 Gy. The polymer films were characterized by X‐ray diffraction, ultraviolet–visible spectroscopy, and scanning electron microscopy. The X‐ray diffraction pattern showed that after irradiation, the crystallinity improved with increasing fluence because of an increase in the crystalline regions dispersed in an amorphous phase. The ultraviolet–visible spectra showed a shift in the absorbance edge toward higher wavelengths, which indicated a significant decrease in the band gap of the polypyrrole film after irradiation. The scanning electron microscopy study showed a systematic change in the surface of the polymer. A similar pattern was observed with the γ irradiation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The Effect of glycerol on the crystalline,thermal, and tensile properties of CaCl2‐doped starch/PVA films

Starch/poly(vinyl alcohol) (PVA) films with the addition of 10 wt% CaCl₂ and various content of glycerol were prepared. The effect of glycerol on the crystalline, thermal, and tensile properties of CaCl₂‐doped starch/PVA films was studied by X‐ray diffraction, thermogravimetric analysis (TGA), and tensile testing, respectively. The effect of glycerol on the miscibility of CaCl₂‐doped starch/PVA films was studied by scanning electron microscopy. The CaCl₂‐doped starch/PVA film became more homogeneous after the addition of glycerol. The addition of glycerol would increase the crystallinity of CaCl₂‐doped starch/PVA film. With the addition of 10 wt% glycerol and 10 wt% CaCl₂, the starch/PVA film showed the highest degree of crystallinity. The TGA results show that the thermal stability of CaCl₂‐doped starch/PVA film increased after the addition of glycerol. The toughness of CaCl₂‐doped starch/PVA films was enhanced with the addition of glycerol. The starch/PVA film with the addition of 10 wt% CaCl₂ and 20 wt% glycerol showed the tensile strength of 17 MPa and the elongation at break of 428%. Moreover, the water sorption of CaCl₂‐doped starch/PVA film decreased after the addition of glycerol at the low and intermediate relative humidity of 33 and 54%. POLYM. COMPOS., 37:3191–3199, 2016. © 2015 Society of Plastics Engineers     

Synthesis,physical properties,and characterization of starch‐based blend films by adding nano‐sized TiO2/poly(methyl metacrylate‐co‐acrylamide)

The purpose of this study was to improve the physical properties and to expand the application range of starch‐based blend films added nano‐sized TiO₂/poly(methyl methacrylate‐co‐acrylamide) (PMMA‐co‐AM). Starch‐based blend films were prepared by using corn starch, polyvinyl alcohol (PVA), nano‐sized PMMA‐co‐AM, nano‐sized TiO₂/PMMA‐co‐AM particles, and additives, i.e., glycerol (GL) and citric acid (CA). Nano‐sized PMMA‐co‐AM was synthesized by emulsion polymerization and TiO₂ nanoparticles were also prepared by using sol–gel method. Nano‐sized TiO₂/PMMA‐co‐AM particles were synthesized by wet milling for 48 h. The morphology and crystallinity of TiO₂, nano‐sized PMMA‐co‐AM and TiO₂/PMMA‐co‐AM particles were investigated by using the scanning electron microscope (SEM) and X‐ray diffractometer (XRD). In addition, the functional groups of the TiO₂/PMMA‐co‐AM particles were characterized by IR spectrophotometry (FTIR). The physical properties such as tensile strength (TS), elongation at break (%E), degree of swelling (DS), and solubility (S) of starch‐based films were evaluated. It was found that the adding of nano‐sized particles can greatly improve the physical properties of the prepared films. The photocatalytic degradability of starch/PVA/nano‐sized TiO₂/PMMA‐co‐AM composite films was evaluated using methylene blue (MB) and acetaldehyde (ATA) as photodegradation target under UV and visible light. The degree of decomposition (C/C₀) of MB and ATA for the films containing TiO₂ and CA was 0.506 and 0.088 under UV light irradiation and 0.586 (MB) and 0.631 (ATA) under visible light irradiation, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Optical parameters and absorption studies of UV‐irradiated azo dye‐doped PMMA films

PMMA and PMMA films doped with different contents of azo dye have been made by using the casting technique. The absorption spectral analysis showed that the doped films have two absorption bands attributed to the π‐π* and n‐π* transition of chromophore groups. These bands disappear upon UV‐irradiation, suggesting that the studied system undergoes a photo degradation process. The absorption coefficient and optical energy gap (E_g) have been obtained from the absorption edge in the 200–900 nm range. It was found that E_g decreases with increasing doping levels, whereas it increases with increasing irradiation time. The width of the tail of localized states in the band gap (ΔE) was evaluated using the Urbach edge method. Some optical parameters were determined from the reflection and transmission spectra in the spectral range of 200–2500 nm. The dependence of the refractive index on irradiation time and doping level have been discussed. It was found that the photo‐induced refractive index changes are very large. These changes suggest the applicability of the studied system in optical devices. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Microwave photocatalysis III. Transition metal ion‐doped TiO2 thin films on mercury electrodeless discharge lamps: preparation,characterization and their effect on the photocatalytic degradation of mono‐chloroacetic acid and Rhodamine B

BACKGROUND: Mercury electrodeless discharge lamps (Hg‐EDLs) were used to generate UV radiation when exposed to a microwave field. EDLs were coated with doped TiO₂ in the form of thin films containing transition metal ions Mⁿ⁺ (M = Fe, Co, Ni, V, Cr, Mn, Zr, Ag). Photocatalytic degradation of mono‐chloroacetic acid (MCAA) to HCl, CO₂, and H₂O, and decomposition of Rhodamine B on the thin films were investigated in detail. RESULTS: Polycrystalline thin doped TiO₂ films were prepared by dip‐coating of EDL via a sol–gel method using titanium n‐butoxide, acetylacetone, and a transition metal acetylacetonate. The films were characterized by Raman spectroscopy, UV/Vis absorption spectroscopy, X‐ray photoelectron spectroscopy (XPS), electron microprobe analysis and by atomic force microscopy (AFM). The photocatalytic activity of doped TiO₂ films was monitored in the decomposition of Rhodamine B in water. Compared with the pure TiO₂ film, the UV/Vis spectra of V, Zr and Ag‐doped TiO₂ showed significant absorption in the visible region, and hence the photocatalytic degradation of MCAA had increased. The best apparent degradation rate constant (0.0125 min^?1), which was higher than that on the pure TiO₂ film by a factor of 1.7, was obtained with the Ag(3%)/TiO₂ photocatalyst. The effect of doping level of vanadium acetylacetonate on the photocatalytic efficiency of the V‐doped TiO₂ was determined. CONCLUSIONS: Transition metal ion‐doped TiO₂ thin films showed significant absorption in the visible region. The metal doped TiO₂ photocatalyst (with an appropriate amount of V, Zr and Ag) on the Hg‐EDLs increased the degradation efficiency of MCAA in a microwave field. Copyright © 2009 Society of Chemical Industry     

Red emission from Eu3+: PVA polymer film

Bright red luminescent Eu³⁺ doped polyvinyl alcohol (PVA) films were made by solution casting technique. The emission performance of these films was studied from the measurement of excitation, emission, and lifetimes. On irradiation with an UV source, the doped films emitted bright red light. Such luminescent polymer films are expected to find potential applications as new optical materials. Emission process in the system was explained by an energy level scheme. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3273–3276, 2006     

Preparation and fluorescence properties of poly(o‐methyl‐acrylamideyl‐benzoic acid)‐ZnS composites

Poly(o‐methyl‐acrylamideyl‐benzoic acid)‐ZnS (P(o‐MAABA)‐ZnS) nanocomposites have been prepared and characterized. The resultant P(o‐MAABA)‐ZnS nanocomposites in solution show two emissions in the purple‐light area (370 nm) and in the blue‐light area (425 nm), which are assigned to the polymer and ZnS nanoparticles, respectively. The coordination between the polymer and Zn²⁺ and the surface chemical composition has been studied by Infrared spectroscopy and X‐ray photoelectron spectroscopy (XPS). The particle size of ZnS nanoparticles was homogeneous and the average size was 3.8 nm, which were characterized by UV absorption spectrum and X‐ray Diffraction. The P(o‐MAABA)‐ZnS composites displays good film formability and the films also show two emissions in 370 and 425 nm. After doped with Tb³⁺, there was effective energy transfer from ZnS nanoparticles to Tb³⁺. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies of solvent effect on the conductivity of 2‐mercaptopyridine‐doped solid polymer blend electrolytes and its application in dye‐sensitized solar cells

Solvents and electrolytes play an important role in the fabrication of dye‐sensitized solar cells (DSSCs). We have studied the poly(ethylene oxide)‐poly(methyl methacrylate)‐KI‐I₂ (PEO‐PMMA‐KI‐I₂) polymer blend electrolytes prepared with different wt % of the 2‐mercaptopyridine by solution casting method. The polymer electrolyte films were characterized by the FTIR, X‐ray diffraction, electrochemical impedance and dielectric studies. FTIR spectra revealed complex formation between the PEO‐PMMA‐KI‐I₂ and 2‐mercaptopyrindine. Ionic conductivity data revealed that 30% 2‐mercaptopyridine‐doped PEO‐PMMA‐KI‐I₂ electrolyte can show higher conductivity (1.55 × 10^?5 S cm^?1) than the other compositions (20, 40, and 50%). The effect of solvent on the conductivity and dielectric of solid polymer electrolytes was studied for the best composition (30% 2‐mercaptopyridine‐doped PEO‐PMMA‐KI‐I₂) electrolyte using various organic solvents such as acetonitrile, N,N‐dimethylformamide, 2‐butanone, chlorobenzene, dimethylsulfoxide, and isopropanol. We found that ac‐conductivity and dielectric constant are higher for the polymer electrolytes processed from N,N‐dimethylformamide. This observation revealed that the conductivity of the solid polymer electrolytes is dependent on the solvent used for processing and the dielectric constant of the film. The photo‐conversion efficiency of dye‐sensitized solar cells fabricated using the optimized polymer electrolytes was 3.0% under an illumination of 100 mW cm^?2. The study suggests that N,N‐dimethylformamide is a good solvent for the polymer electrolyte processing due to higher ac‐conductivity beneficial for the electrochemical device applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42489.     

Gamma‐radiation‐induced graft copolymerization of N‐[4‐(N′‐substituted amino carbonyl)phenyl] maleimide onto poly(vinlyl chloride) films

Three types of N[4‐(N‐substituted amino carbonyl)phenyl] maleimide (RPhMI:N‐substituent (R) = phenyl, cyclohexyl, p‐chlorophenyl) were grafted onto poly(vinyl chloride) (PVC) films by using gamma irradiation. The effects of different parameters on the graft yield were investigated. These parameters included radiation dose and monomer concentration. Thermal properties of the grafted polymer were investigated by the determination of dehydrochlorination rate, thermal gravimetric behavior, and UV stability.     

Light‐control birefringence of oriented poly(vinyl cinnamate) by UV irradiation

The research focused on realizing the birefringence of light‐control polymer films. The photoelastic birefringence exhibits when Poly (vinyl cinnamate) (PVCi) films are stretched below their glass transition temperature (T_g). The birefringence of PVCi decreases when the UV irradiation happens because the side chains of the PVCi photo‐react when the oriented films are exposed to UV light. A method to quantify the birefringence ability of the polymer films is created and verified. Using this method, the decrease of the birefringence through the UV irradiation is quantified. The result shows the birefringence of PVCi can be controlled by altering the UV irradiation time. In addition, oriented PVCi films of different esterification degrees were prepared and irradiated at different time, and the birefringence of them was studied to clarify the birefringence mechanism of light‐control polymer films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of new ionic crosslinked polymer hydrogel combining polystyrene and poly(4‐vinyl pyridine) and its self‐healing through a reshuffling reaction of the trithiocarbonate moiety under irradiation of ultraviolet light

A new ionic crosslinked polymer hydrogel was achieved by the strategy of ionically crosslinking α,ω‐dibromide terminated polystyrene (Br‐PS‐Br) with poly(4‐vinyl pyridine) (P4VP) which was synthesized by reversible addition‐fragmentation chain transfer polymerization using a chain transfer agent containing a trithiocarbonate moiety. The moiety of trithiocarbonate was introduced into the crosslinked network to show the self‐healing characteristics. The chain structure and components of Br‐PS‐Br and P4VP were characterized through ¹H NMR, gel permeation chromatography, Fourier transform IR spectroscopy and elemental analysis. The P4VP (M_n = 25 300 g mol^?1) chains were crosslinked with Br‐PS‐Br (M_n = 2000 g mol^?1) through the quaternization reaction to form a polymer network which was further crosslinked in acetonitrile by irradiation of UV light to fabricate a hydrogel. Such a hydrogel of P4VP/Br‐PS‐Br cut by a razor blade can be rapidly (1 h) and repeatedly (three times) healed through a reshuffling reaction of the trithiocarbonate moiety under irradiation by UV light. © 2018 Society of Chemical Industry     

Thermal,structural, and optical properties of γ‐irradiated poly(vinyl alcohol)/poly(ethylene glycol) thin film

Poly(vinyl alcohol)/poly(ethylene glycol) (PVA/PEG) copolymer was prepared using casting technique. The obtained PVA/PEG thin films have been irradiated with gamma rays with doses ranging from 1.5 to 20 Gy. The resultant effect of gamma irradiation on the thermal properties of PVA/PEG has been investigated using thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The onset temperature of decomposition T_o and activation energy of thermal decomposition E_a were calculated, results indicating that the PVA/PEG thin film decomposes in one main weight loss stage. Also, the gamma irradiation in dose range 4–12 Gy led to a more compact structure of PVA/PEG copolymer, which resulted in an improvement in its thermal stability with an increase in the activation energy of thermal decomposition. The variation of transition temperatures with gamma dose has been determined using DTA. The PVA/PEG thermograms were characterized by the appearance of an endothermic peak due to melting of crystalline phase. In addition, structural property studies using X‐ray diffraction and infrared spectroscopy were performed on both nonirradiated and irradiated samples. Furthermore, the transmission of the PVA/PEG samples and any color changes were studied. The color intensity (E was greatly increased with increasing the gamma dose and was accompanied by a significant increase in the blue and green color components. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Increase of photoluminescence from fullerene‐doped polymers under laser irradiation

Photoluminescence (PL) from fullerene (C₆₀ and C₇₀)‐doped polymers such as poly(methyl methacrylate) (PMMA), polystyrene (PS), poly(methyl phenyl silane) (PMPS) and poly(phenyl silsesquioxane) (PPSQ) increases gradually under laser irradiation in air (but not in vacuum and in nitrogen) and eventually becomes visible to the naked eye. Concomitantly, the PL peak is broadened and, in most cases, blue‐shifted. No such PL increases are observed for pure C₆₀ films made by vacuum vapor deposition and pure polymer films. Among the polymers used, fullerene‐doped PMMA has the greatest PL increase after several hours of laser irradiation and fullerene‐doped PMPS has the highest rate of PL increase at the initial stage of the laser irradiation. To gain an insight into the mechanism of the PL increase, laser‐irradiated fullerene‐doped PMMA samples were analyzed by UV‐Vis spectrophotometer, FT‐IR, mass spectrometry, GPC and NMR. The results show that the PL increase can be attributed to CH₆₀O_n‐polymer (or C₇₀O_n‐polymer) and oxidized fullerene‐polymer adducts formed by some laser‐induced photochemical reactions among fullerenes, oxygen and polymers.     

Synthesis and properties of polymer from bis‐3,4‐ethylenedioxythiophene substituted acenaphthenequinoxaline

A new electrochoromic polymer poly(8,11‐bis(3,4‐ethylenedioxy thiophen‐2‐yl)acenaphtho[1,2‐b]‐quinoxaline) (PBEAQ) was synthesized by electrochemical polymerization of the corresponding monomer (BEAQ) in a 0.1 M tetraethylammonium tetrafluoroborate (TEABF₄) dichloromethane–acetonitrile (2 : 1, v : v) solution. The monomer and polymer were characterized by elemental analysis, ¹H‐NMR, IR, and UV‐vis spectroscopy. The electrochemical and optical properties of polymer were investigated by cyclic voltammetry and UV‐vis spectroscopy. Cyclic voltammetry and spectroelectrochemistry studies demonstrated that the polymer can be reversibly reduced and oxidized (both n‐ and p‐doped) between ?2 V and +1.5 V vs. Ag/Ag⁺. The polymer had a transmissive light blue color in the oxidized state and reddish color in the reduced state. Undoped polymer shows UV‐vis absorption peaks at 615 nm in solution, 650 nm in solid state, and has an optical band gap of 1.5 eV. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effects of the electrolyte content on the electrical permittivity,thermal stability,and optical dispersion of poly(vinyl alcohol)–cesium copper oxide–lithium perchlorate nanocomposite solid‐polymer electrolytes

Solid‐polymer electrolytes (SPEs) in the form of poly(vinyl alcohol) (PVA) doped with various amounts (5, 10, and 15 wt %) of lithium perchlorate trihydrate (LiClO₄·3H₂O) and 2 wt % cesium copper oxide (Cs₂CuO₂) nanoparticles were fabricated by a solvent intercalation method. The obtained nanocomposites were evaluated for their chemical structure and microstructural and morphological behaviors via Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy methods, respectively. The obtained dielectric behaviors, alternating‐current conductivity, dielectric modulus, and dielectric relaxation of the SPEs depended on the volume fraction of the electrolyte. Linear behavior of the current–voltage characteristics for all of the SPE films was observed with a slight deviation at a higher voltage. The thermal behaviors of the PVA–Cs₂CuO₂–LiClO₄ films were evaluated by differential scanning calorimetry and thermogravimetric analysis. The refractive index, band‐gap energy, and optical dispersion were examined with UV–visible spectroscopy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45852.