Fabrication of electrospun eggshell membrane nanofibers by treatment with catechin

Optimum processing conditions for the electrospinning of water‐soluble eggshell membrane (S‐ESM) were investigated. Two biocompatible polymers, poly(ethylene oxide) (PEO) and poly(vinyl alcohol) (PVA), were used to improve the processability of S‐ESM for electrospinning in aqueous media. Uniform nanofibers with average diameters of 240 and 335 nm were successfully electrospun for blend ratios at S‐ESM/PEO = 95 : 5 and S‐ESM/PVA = 60 : 40 with a solutes concentration of 20 and 18 wt %, respectively. Insoluble S‐ESM/PEO and S‐ESM/PVA fibers were achieved after treatment with catechin and required no toxic or synthetic additives. FTIR spectra indicated that the hydrogen bond formed between S‐ESM and catechin was the main interaction that improved the insolubility of S‐ESM/PEO and S‐ESM/PVA nanofibers in water. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Flurbiprofen axetil loaded coaxial electrospun poly(vinyl pyrrolidone)–nanopoly(lactic‐co‐glycolic acid) core–shell composite nanofibers: Preparation,characterization, and anti‐adhesion activity

Flurbiprofen axetil (FA)‐loaded coaxial electrospun poly(vinyl pyrrolidone) (PVP)–nanopoly(lactic‐co‐glycolic acid) core–shell composite nanofibers were successfully fabricated by a facile coaxial electrospinning, and an electrospun drug‐loaded system was formed for anti‐adhesion applications. The FA, which is a kind of lipid microsphere nonsteroidal anti‐inflammatory drug, was shown to be successfully adsorbed in the PVP, and the formed poly(lactic‐co‐glycolic acid) (PLGA)/PVP/FA composite nanofibers exhibited a uniform and smooth morphology. The cell viability assay and cell morphology observation revealed that the formed PLGA/PVP/FA composite nanofibers were cytocompatible. Importantly, the loaded FA within the PLGA/PVP coaxial nanofibers showed a sustained‐release profile and anti‐adhesion activity to inhibit the growth of the IEC‐6 and NIH3T3 model cells. With the significantly reduced burst‐release profile, good cytocompatibility, and anti‐adhesion activity, the developed PLGA/PVP/FA composite nanofibers were proposed to be a promising material in the fields of tissue engineering and pharmaceutical science. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41982.     

Zein nanoparticle‐embedded electrospun PVA nanofibers as wound dressing for topical delivery of anti‐inflammatory diclofenac

Bioactive wound dressings from poly(vinyl alcohol) (PVA) and zein nanoparticles (NPs) loaded with diclofenac (DLF) were prepared successfully by the single jet electrospinning method. DLF‐loaded zein NPs with an average diameter of ～228 nm were prepared using anti‐solvent precipitation method. The formulation of zein:DLF 1:1 exhibited optimum encapsulation efficiency of 47.80%. The NPs were characterized by dynamic light scattering, zeta‐potential measurement, and differential scanning calorimetry. In vitro, drug release profiles of the DLF‐loaded zein NPs, and PVA–zein NPs were also studied within 120 h and showed the release efficiency of nearly 80% from zein NPs. A more controlled release of DLF was achieved by embedding the zein NPs in the PVA nanofibers. Fourier transform infrared spectroscopy was used to analyze possible interactions between different components of the fabricated dressings. The mechanical properties of the developed dressings were also evaluated using uniaxial tensile testing. Young's modulus (E) of the dressings decreased after inclusion of zein NPs within the PVA nanofibers. Moreover, fibroblast culturing experiments proved that the composite dressings supported better cell attachment and proliferation compared to PVA nanofibers, by exhibiting moderate hydrophilicity. The results suggested that the electrospun composite dressing of PVA nanofibers and zein NPs is a promising topical drug‐delivery system and have a great potential for wound healing application. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46643.     

Novel electrospun nanofibers incorporating polymeric prodrugs of ketoprofen: Preparation,characterization, and in vitro sustained release

A facile and efficient protocol for the preparation of nanofibers incorporating polymeric ketoprofen prodrugs and polyvinylpyrrolidone was developed. Polymeric ketoprofen prodrugs were constructed by a two‐step chemo‐enzymatic synthetic route, and nanofibers prepared by electrospinning from dimethylformamide/ethanol (1 : 1, v/v) solutions. The morphological characteristics of the fibers were influenced by the concentration of active agent in the spinning solution; average diameters varied from 196 to 370 nm. In vitro release studies indicated that the ketoprofen release rate from the electrospun fibers was significantly higher than that from the pure polymeric prodrugs. Cumulative drug release from the electrospun fibers reached 40–70% after 3 h and 75–100% after 12 h, while the pure polymeric prodrug released only 7–9% of the active agent over 12 h. Functional nanofibers incorporating polymeric prodrugs therefore comprise potentially effective drug delivery systems for sustained release. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1570–1577, 2013     

5-Fluorouracil-loaded poly(vinyl alcohol)/chitosan blend nanofibers: morphology,drug release and cell culture studies

Electrospun polymeric nanofibers as carriers for anticancer drugs have received a great deal of attention to treat tumor cells. This work was aimed to prepare an optimized nanofibrous sample based on poly(vinyl alcohol) (PVA)/chitosan (CS) blend, and then evaluate it containing 5-fluorouracil (5-FU) in terms of morphology, drug release, and cell culture. The electrospinning conditions to produce PVA/CS (50/50) blend nanofibers with an average diameter of approximately 150.8 nm were adjusted as follows: applied voltage 17 kV, needle tip to collector distance 60 cm, and flow rate 0.1 mL/h. The obtained results from Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) showed that there were no chemical interactions between the polymers and drug during the electrospinning process and the uniform morphology without beads. Moreover, to prolong 5-FU release from the blend nanofibers, three layered samples consisting of PVA/CS blend and poly (ε-caprolactone) (PCL) [PVA/CS-PCL 3-layers] were electrospun. On the other hand, by adding PCL in the PVA/CS blend nanofibers, the samples showed more hydrophobic property. Eventually, thiazolyl blue (MTT) assay along with NIH 3T3 cells culture proved that the sample could kill more than 80% of the cells. This formulation could be a promising candidate for cancer therapy potentially.

     

Crystallinity study of electrospun poly (vinyl alcohol) nanofibers: effect of electrospinning,filler incorporation,and heat treatment

This study aims to explore crystallinity variations of polyvinyl alcohol (PVA) as a result of electrospinning, filler addition, and heat treatment. Pure PVA and PVA nanocomposite fibers containing only nanohydroxy apatite (nHAp) and together with cellulose nanofibers (CNF) were electrospun. Electrospun nanofibers were heat treated at 180 °C for 8 h. The morphology of electrospun fibers was evaluated by scanning electron microscopy (SEM) while Fourier transform infrared spectroscopy, differential scanning calorimetry, and wide angle X-ray scattering were used to analyze nanofibers crystallinity. Un-treated electrospun nanofibers were shrank and lost their porous structure in water, while heat treatment of nanofibers caused stabilization of fibrous mats in boiling water. It was concluded that the crystallinity of electrospun PVA were considerably reduced compared to PVA powder due to formation of metastable—small and/or defective crystals. Adding small content (1 wt%) of nHAp led to increase in electrospun nanofibers crystallinity. However, incorporation of higher content of nHAp and CNF caused reduction of crystallinity most probably due to possible interactions among components which interrupt the orientation of macromolecules. All analyzing methods proved the crystallinity enhancement of nanofibers upon heat treatment which can be attributed mostly to water evaporation from electrospun fibers structure.     

Reactive electrospinning of poly(vinyl alcohol) nanofibers

We aim to couple the electrospinning in‐line with solution chemistry to fabricate novel crosslinked polymer nanofibers. Poly(vinyl alcohol) (PVA) was used as a model polymer due to its high amount of hydroxyl groups. To obtain ideal parameters for electrospinning, pure PVA was explored primarily. To gain crosslinked fibers, PVA was first crosslinked partially with glutaraldehyde (GA) followed by transferring this precursor to a long hot tube which was used as reactor and then electrospun right before gelation. The preheating time and tube‐passing time were determined with viscometer and rheometer. The reactive as‐spun fibers could maintain their original morphology after water immersion due to their high crosslinking degree. The thermal stability and mechanical property of reactive as‐spun fibers were improved drastically compared with pure and GA vapor crosslinked PVA fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of atactic poly(vinyl alcohol)/silver composite nanofibers by electrospinning and their characterization

Poly(vinyl alcohol) (PVA)/silver composite nanofibers were successfully prepared by the electrospinning method. Water‐based colloidal silver in a PVA solution was directly mixed without any chemical or structural modifications into PVA polymer fibers to form organic–inorganic composite nanofibers. The ratio of silver colloidal solution to PVA played an important role in the formation of the PVA/silver composite nanofibers. We prepared two different atactic PVA/silver nanocomposites with number‐average degrees of polymerization of 1700 and 4000 through electrospinning with various processing parameters, such as initial polymer concentration, amount of silver colloidal solution, applied voltage, and tip‐to‐collector distance. The PVA/silver composite nanofibers were characterized by field emission scanning electron microscopy and transmission electron microscopy (TEM). TEM images showed that silver nanoparticles with an average diameter of 30–50 nm were obtained and were well distributed in the PVA nanofibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrospun poly(vinyl alcohol) composite nanofibers with halloysite nanotubes for the sustained release of sodium d‐pantothenate

Poly(vinyl alcohol) (PVA) nanofibers containing halloysite nanotubes (HNTs) loaded with sodium d ‐pantothenate (SDP) were successfully fabricated via simple blend‐electrospinning. SDP was efficiently loaded into the innate HNT lumen with an SDP/HNT mass ratio of 1.5:1 via vacuum treatment. The SDP‐loaded HNT‐inclusion complex was evaluated with drug‐loading efficiency testing, Fourier transform infrared (FTIR) spectroscopy, and X‐ray diffraction. The morphologies of the nanofibers were observed by scanning electron microscopy, which revealed uniform and smooth surfaces of the nanofibers. The addition of HNTs to the composite nanofibers increased the viscosity of the polymer solution, and this suggested shorter fiber diameters. FTIR spectroscopy verified the good compatibility of the SDP and HNTs with PVA. Moreover, the swelling properties were found to quantitatively correlate with weight loss. In vitro drug‐release testing revealed that the HNTs and crosslinking reaction most dramatically affected the sustained release of SDP from the PVA and SDP‐loaded HNT complex. In the drug‐release kinetics model, SDP release depended on the diffusion caused by the deformation of the polymer‐based structures in the medium; it followed Fickian diffusion with acceptable coefficient of determination (r²) values between 0.88 and 0.94. Most importantly, the HNTs as natural biocontainers effectively modulated the release profile by loading the active compound in harmony with the electrospun nanofibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42900.     

Photoluminescent electrospun polymeric nanofibers incorporating germanium nanocrystals

The photoluminescent germanium nanocrystals (Ge-NCs) were successfully incorporated into electrospun polymeric nanofiber matrix in order to develop photoluminescent nanofibrous composite web. In the first step, the synthesis of Ge-NCs was achieved by nanosecond pulsed laser ablation of bulk germanium wafer immersed in organic liquid. The size, the structural and the chemical characteristics of Ge-NCs investigated by TEM, XPS, XRD and Raman spectroscopy revealed that the Ge-NCs were highly pure and highly crystalline having spherical shape within 3–20 nm particle size distribution. In the second step, Ge-NCs were mixed with polyvinyl alcohol (PVA) polymer solution, and then, Ge-NC/PVA nanofibers were obtained via electrospinning technique. The electrospinning of Ge-NCs/PVA nanoweb composite structure was successful and bead-free Ge-NCs/PVA nanofibers having average fiber diameter of 185 ± 40 nm were obtained. The STEM analysis of the electrospun Ge-NCs/PVA nanofibers elucidated that the Ge-NCs were distributed homogeneously in the polymeric nanofiber matrix. The UV–Vis absorption and photoluminescence spectroscopy studies indicated the quantum confinement effect of Ge-NCs on the optical properties of the electrospun Ge-NCs/PVA nanoweb.     

Electrospun biocompatible poly (ε-caprolactonediol)-based polyurethane core/shell nanofibrous scaffold for controlled release of temozolomide

The electrospun biocompatible poly (ε-caprolactonediol)-based polyurethane (PCL-Diol-b-PU) core/shell nanofibrous scaffolds were prepared via the coaxial electrospinning process. Temozolomide (TMZ) as an anticancer drug was loaded into the core of fibers to control the release of TMZ for the treatment of glioblastoma. The properties of nanofibers were characterized using XRD, FTIR, SEM, and TEM analysis. The sustained delivery of TMZ without initial burst release was achieved from all prepared core–shell nanofibrous samples over 30 days. The cytotoxicity results revealed that the TMZ-loaded PCL-Diol-b-PU core–shell nanofibers could be used as a drug delivery implant to deliver TMZ against glioblastoma tumors.     

Preparation of poly(ether sulfone) nanofibers by gas‐jet/electrospinning

Poly(ether sulfone) (PES) nanofibers were prepared by the gas‐jet/electrospinning of its solutions in N,N‐dimethylformamide (DMF). The gas used in this gas‐jet/electrospinning process was nitrogen. The morphology of the PES nanofibers was investigated with scanning electron microscopy. The process parameters studied in this work included the concentration of the polymer solution, the applied voltage, the tip–collector distance (TCD), the inner diameter of the needle, and the gas flow rate. It was found from experimental results that the average diameter of the electrospun PES fibers depended strongly on these process parameters. A decrease in the polymer concentration in the spinning solutions resulted in the formation of nanofibers with a smaller diameter. The use of an 18 wt % polymer solution yielded PES nanofibers with an average diameter of about 80 nm. However, a morphology of mixed bead fibers was formed when the concentration of PES in DMF was below 20 wt % during gas‐jet/electrospinning. Uniform PES nanofibers with an average diameter of about 200 nm were prepared by this electrospinning with the following optimal process parameters: the concentration of PES in DMF was 25 wt %, the applied voltage was 28.8 kV, the gas flow was 10.0 L/min, the inner diameter of the needle was 0.24 mm, the TCD was 20 cm, and the flow rate was 6.0 mL/h. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Composite chitosan/poly(ethylene oxide) electrospun nanofibrous mats as novel wound dressing matrixes for the controlled release of drugs

The aim of this study was to develop novel biomedical electrospun nanofiber mats for controlled drug release, in particular to release a drug directly to an injury site to accelerate wound healing. Here, nanofibers of chitosan (CS), poly(ethylene oxide) (PEO), and a 90 : 10 composite blend, loaded with a fluoroquinolone antibiotic, such as ciprofloxacin hydrochloride (CipHCl) or moxifloxacin hydrochloride (Moxi), were successfully prepared by an electrospinning technique. The morphology of the electrospun nanofibers was investigated by scanning electron microscopy. The functional groups of the electrospun nanofibers before and after crosslinking were characterized by Fourier transform infrared spectroscopy. X‐ray diffraction results indicated an amorphous distribution of the drug inside the nanofiber blend. In vitro drug‐release evaluations showed that the crosslinking could control the rate and period of drug release in wound‐healing applications. The inhibition of bacterial growth for both Escherichia coli and Staphylococcus aureus were achieved on the CipHCl‐ and Moxi‐loaded nanofibers. In addition, both types of CS/PEO and drug‐containing CS/PEO nanofibers showed excellent cytocompatibility in the cytotoxicity assays. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42060.     

Three‐layered electrospun PVA/PCL/PVA nanofibrous mats containing tetracycline hydrochloride and phenytoin sodium: A case study on sustained control release,antibacterial, and cell culture properties

The main objective of this work was to prepare a tailor‐made electrospun nanofibrous samples based on poly(?‐caprolactone) (PCL) containing tetracycline hydrochloride (TC‐HCl) as a middle layer and poly(vinyl alcohol) (PVA) including phenytoin sodium (PHT‐Na) as lateral layers. The characterizations of the three‐layered electrospun samples were carried out by using SEM, ATR‐FTIR spectroscopy along with swelling/weight loss, UV–vis spectrophotometry as well as HPLC, antibacterial and MTT tests. The SEM micrograph images showed that the average diameter of PCL nanofibers was decreased from 243 ± 7 nm to 181 ± 5 nm by adding TC‐HCl. The hydrolytic degradation of PVA nanofibers in the exposure of phosphate buffer solution (PBS) was confirmed by ATR‐FTIR results in which a change at the intensity of the characteristic peak located at 3333 cm^?1 corresponding to hydroxyl groups (? OH) was observed. The UV–vis outcomes revealed a sustained control release of TC‐HCl from the three‐layered nanofibrous samples (PVA/PCL/PVA) with an amount of about 43% compared to the PCL nanofibers which had an ultimate release of the drug about 79%. Furthermore, the HPLC chromatograms showed the released PHT‐Na from PVA nanofibers about 87%. Finally, the MTT assay along with the antibacterial evaluation exhibited that the surfaces of these electrospun three‐layered nanofibrous samples have no cytotoxicity as well as the controlled release of TC‐HCl from them enabled their prolonged use for preventing the bacterium growth such as S. aureus during 24‐h treatment time. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43309.     

Microstructure and characterization of electrospun poly(vinyl alcohol) nanofiber scaffolds filled with graphene nanosheets

Graphene nanosheets (GNSs) have attracted significant scientific attention because of their remarkable features, including exceptional electron transport, excellent mechanical properties, high surface area, and antibacterial functions. Poly(vinyl alcohol) (PVA) solutions filled with GNSs were prepared for electrospinning, and their spinnability was correlated with their solution properties. The effects of GNS addition on solution rheology and conductivity were investigated. The as‐spun fibers were characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC). The results revealed the effects of GNS on the microstructure, morphology, and crystallization properties of PVA/GNS composite nanofibers. The addition of GNSs in PVA solution increased the viscosity and conductivity of the solution. The electrospun fiber diameter of the PVA/GNS composite nanofiber was smaller than that of neat PVA nanofiber. GNSs were not only embedded at the fibers but also formed protrusions on the fibers. In addition, the crystallinity of PVA/GNS fiber decreased with higher GNS content. The possible application of PVA/GNS fibers in tissue engineering was also evaluated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41891.     

Preparation and characterization of poly(vinyl alcohol) nanofiber mats crosslinked with blocked isocyanate prepolymer

Poly(vinyl alcohol) (PVA) nanofibers crosslinked with blocked isocyanate prepolymer (BIP) were successfully prepared using the electrospinning process and subsequent thermal treatment. Fourier transform infrared spectroscopy and solid‐state ¹³C NMR spectroscopy demonstrated that chemical crosslinks between the hydroxyl group of PVA and the isocyanate group of BIP were formed. Thermogravimetric analysis and differential scanning calorimetry results indicated that when the BIP content was increased, the thermal stability of PVA/BIP nanofibers increased, and the crystallinity of PVA decreased. Field emission scanning electron microscopy was used to measure the average diameter (200–300 nm) of the electrospun PVA/BIP nanofibers. The water contact angles were 10.2° and 113° for the pristine PVA nanofibers and PVA nanofibers crosslinked with 8 wt% BIP, respectively. The tensile strength of the crosslinked PVA nanofibers was 53.7 MPa, which was seven times higher than that of pristine PVA. The improved tensile strength and water resistance of the crosslinked PVA/BIP nanofibers were due to a combination of increased crosslinking density and decrease in the number of hydroxyl groups on the surface of the PVA/BIP nanofibers. Copyright © 2010 Society of Chemical Industry     

Biocompatibility studies of electrospun nanofibrous membrane of PLLA‐PVA blend

Electrospinning, self‐assembly, and phase separation are some of the techniques available for the synthesis of nanofibers. Of these techniques, electrospinning is a simple and versatile method for generating ultrafine fibers from a wide variety of polymers and polymer blends. Poly L ‐lactide (PLLA) and Poly (vinyl alcohol) (PVA) are biodegradable and biocompatible polymers which are mainly used for biomedical applications. Nanofibrous membranes with 1:9 ratio of PLLA to PVA (8 to 10 wt % and 10 wt %) were fabricated by electrospinning. The percentage porosity and contact angle of PVA in the PLLA‐PVA nanofibrous mat increased from 80 to 83% and from 39 ± 3° to 55 ± 3°, respectively. The water uptake percentage of PVA nanofibers decreased from 190 to 125% on the addition of PLLA to PVA in the PLLA‐PVA nanofibrous mat. The nanofiber morphology, structure and crystallinity were studied by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT‐IR), and X‐ray diffraction (XRD), respectively. The thermal properties were studied by thermogravimetric analysis (TGA) and differential scanning calorimetery (DSC). The biocompatibility studies of PLLA‐PVA blend were performed using fibroblast cells (NIH 3T3) by MTT assay method. The release of Curcumin (0.5, 1.0, and 1.5 wt %) from PLLA‐PVA blend was found to be ～ 78, 80, and 80%, respectively, in 4 days. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Self‐assembled honeycomb polyurethane nanofibers

Electrospinning uses a high voltage electric field to produce fine fibers. A new phenomenon of self‐assembly in the electrospinning of polyurethane nanofibers is observed. This report is the first known self‐assembling phenomenon in polyurethane electrospun nanofibers. Electrospun polyurethane nanofibers self‐assemble into unique honeycomb patterns on the collector surface. This novel observation opens up new and interesting opportunities for electrospun fibers in the areas of drug delivery devices, protective clothing, filters, and tissue scaffolds. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3121–3124, 2006     

Fabrication and characterization of novel nanofibers from cress seed mucilage for food applications

Cress seed mucilage (CSM) as a new source of biomacromolecule has gained attraction in food science due to its biodegradability and biocompatibility. In this research CSM–poly(vinyl alcohol) (PVA) nanofibers were produced under different conditions by electrospinning technique. Viscosity and electrical conductivity of the produced biopolymers were analyzed. The effect of CSM to PVA volume ratio and applied electrical field were evaluated on nanofiber morphology by scanning electron spectroscopy. The optimum nanofibers showed smooth and uniform surfaces with diameter size range of 95–278 nm. The results of Fourier transform infrared spectroscopy of CSM–PVA nanofiber with volume ratio of 60:40 showed characteristic peaks of CSM and PVA. X‐ray diffractometer data clearly revealed the amorphous structure of the electrospun nanofibers. Thermogravimetric and derivative thermogravimetric analysis indicated that thermal stability of electrospun nanofibers increased in comparison to CSM and PVA. The results of this study indicated that CSM can be applied as a new source of biopolymer for production of nanofibers that could be used for different applications such as delivery systems and packaging film fabrication. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45811.     

PS/PMMA-CdSe/ZnS Quantum Dots Hybrid Nanofibers for VOCs Sensors

Hybrid nanofibers containing CdSe/ZnS quantum dots have been produced by electrospinning of hybrid latexes to characterize the electro-optical behavior of this novel luminescent sensing material. The latexes are synthesized by seeded semi-batch emulsion polymerization yielding cross-linked core-shell PS/QDs/PMMA particles with efficiently encapsulated quantum dots guaranteeing a good optical stability. Addition of polyvinyl alcohol (PVA) or polyethylene oxide (PEO) to the latexes is necessary to produce polymeric dispersions suitable for electrospinning manufacture of the nanometric fibers. The optimized polymeric dispersions are successfully electrospun obtaining fluorescent nanofibers in both cases. The hybrid nanofibers are sensitive to selected solvents (acetone, methanol and THF) and present positive response making them good candidates for the production of VOC sensors.