Study of the effect of rutile/anatase TiO2 nanoparticles synthesized by hydrothermal route in electrospun PVA/TiO2 nanocomposites

Mixed rutile–anatase TiO₂ nanoparticles were synthesized by hydrothermal treatment under acidic conditions and incorporated into poly(vinyl alcohol) (PVA). These nanocomposites were electrospun to produce nanofibers of PVA/TiO₂, which were characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction (XRD), UV–vis diffuse reflectance spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The photocatalytic degradation of Rhodamine B and degradation of the polymer by UV‐C lamps were also investigated. The results showed that TiO₂ nanoparticles did not change the morphology and thermal behavior of the nanofiber polymer, but were effective in modifying the UV absorption of PVA without reducing its stability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The electrorheological properties of polyaniline nanofiber/kaolinite hybrid nanocomposite

A novel polyaniline nanofiber/kaolinite nanoplatelet hybrid nanocomposite was synthesized by means of rapidly mixed in situ polymerization. The resultant polyaniline/kaolinite hybrid nanocomposite was characterized via different techniques, such as X‐ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results show that 2D clay nanoplatelets are coated by the 1D polyaniline nanofibers. The nanoclay platelets can improve the thermal stability of polyaniline nanofibers. An electrorheological effect is found with the suspension of polyaniline nanofiber/kaolinite nanoplatelet hybrid nanocomposite dispersed in silicone oil. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1104‐1113, 2013     

Development of poly(vinylcarbazole)/alumina nanocomposite coatings for corrosion protection of 316L stainless steel in 3.5% NaCl medium

Poly(vinylcarbazole) (PVK) and PVK‐alumina (Al₂O₃) nanocomposite coatings were electrochemically coated on 316 L stainless steel (SS) substrates for corrosion protection of 316 L SS in 3.5 weight (wt) % NaCl medium. The formation of PVK and incorporation of nanoalumina particles in PVK‐Al₂O₃ nanocomposite coatings were confirmed from attenuated total reflectance‐infrared spectroscopy (ATR‐IR). Thermal analysis (TG) results showed enhanced thermal stability for the composites relative to PVK. Incorporation of Al₂O₃ nanoparticles enhanced the micro hardness of PVK coated 316 L SS. The dispersion of alumina nanoparticles was examined via scanning electron microscope (SEM) and tunneling electron microscopy (TEM) and revealed distinct features. The influence of nanoparticles on the barrier properties of PVK and PVK‐Al₂O₃ nanocomposites was evaluated in aqueous 3.5 wt % NaCl by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies. The results proved that PVK nanocomposite coatings provided better protection for 316 L SS than PVK coatings. The drastic increase in impedance values is due to the high corrosion resistance offered by the PVK nanocomposite coatings that arises due to the interaction between Al₂O₃ nanoparticles and PVK. The highest corrosion protection shown by the 2 wt % nano Al₂O₃ incorporated PVK composite coatings proved enhanced corrosion resistance compared to PVK. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44937.     

In situ fabrication of polyaniline‐silver nanocomposites using soft template of sodium alginate

Polyaniline (PANI)‐Ag nanocomposites were synthesized by in situ chemical polymerization approach using ammonium persulfate and silver nitrate as oxidant. Characterizations of nanocomposites were done by ultraviolet–visible ( UV–vis), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM). UV–vis, XRD and FTIR analysis established the formation of PANI/Ag nanocomposites and face‐centered‐cubic phase of silver. PANInanofibers were of average diameter ～ 30 nm and several micrometers in length. Morphological analysis showed that the spherical‐shaped silver nanoparticles decorate the surface of PANI nanofibers. Silver nanoparticles of average diameter ～ 5–10 nm were observed on the TEM images for the PANI‐Ag nanocomposites. Such type of PANI‐Ag nanocomposites can be used as bistable switches as well as memory devices. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Protective properties of PPy‐Au nanocomposite coatings prepared by sonoelectrochemisty and optimized by the Taguchi method

The polypyrrole (PPy) and polypyrrole‐Au (PPy‐Au) nanocomposite films have been sonoelectrochemically synthesized on St‐12 steel electrodes using the galvanostatic technique. Experimental design according to the Taguchi method has been applied to optimize the factors on the synthesis of PPy‐Au nanocomposite coating. Three factors were used to design an orthogonal array L9: Synthesis time (t), Current density (I), and Concentration of HAuCl₄ (C). The synthesized Au nanoparticles during polymerization were characterized by Ultraviolet–visible (UV‐visible) spectroscopy. Characterization of the surfaces was done by scanning electron microscope (SEM), energy dispersive X‐ray spectrum (EDX), and atomic force microscope (AFM). The scanning electron microscopy (SEM) image of PPy shows a smooth surface while PPy‐Au nanocomposite film has a compact morphology. Moreover, energy dispersive X‐ray spectrum (EDX) is evidence for the incorporation of Au nanoparticles. The corrosion protection of coatings was investigated by open circuit potential (OCP) time trends, potentiodynamic polarization technique, and electrochemical impedance spectroscopy (EIS) in a NaCl 3.5% solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41087.     

Preparation and antibacterial activity of polyvinyl alcohol/regenerated silk fibroin composite fibers containing Ag nanoparticles

Polyvinyl alcohol (PVA)/regenerated silk fibroin (SF)/AgNO₃ composite nanofibers were prepared by electrospinning. A large number of nanoparticles containing silver were generated in situ and well‐dispersed nanoparticles were confirmed by transmission electron microscopy (TEM) intuitionally. Ultraviolet (UV)‐visible spectroscopy and X‐ray diffraction (XRD) patterns indicated that nanoparticles containing Ag were present both in blend solution and in composite nanofibers after heat treatment and after subsequent UV irradiation. By annealing the nanofibers, Ag⁺ therein was reduced so as to produce nanoparticles containing silver. By combining heat treatment with UV irradiation, Ag⁺ was transformed into Ag clusters and further oxidized into Ag₃O₄ and Ag₂O₂. Especially size of the nanoparticles increased with heat treatment and subsequent UV irradiation. This indicated that the nanoparticles containing silver could be regulated by heat treatment and UV irradiation. The antimicrobial activity of heat‐treated composite nanofibers was evaluated by Halo test method and the resultant nanofibers showed very strong antimicrobial activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Structural and ultraviolet‐protective properties of nano‐TiO2‐doped polypropylene filaments

Textiles, with appropriate light absorbers and suitable finishing methods, can be used as ultraviolet (UV) protection materials. In this study, we investigated the effects of nano‐TiO₂ particles on the UV‐protective and structural properties of polypropylene (PP) textile filaments. Master batches of PP/TiO₂ nanoparticles were prepared by melt compounding before spinning, and filaments incorporating 0.3, 1, and 3% TiO₂ nanoparticles were spun in a pilot melt‐spinning machine. The structural properties of the nanocomposite fibers were analyzed with scanning electron microscopy, X‐ray diffractometry, differential scanning calorimetry, and tensile tests. The UV‐protection factor was determined to evaluate the UV‐protective properties of the filaments. In conclusion, although the structure and mechanical properties of the nanocomposite filaments were slightly affected by the addition of nano‐TiO₂, the UV‐protective properties of the PP filaments improved after treatment with nano‐TiO₂, and the nanocomposite filaments exhibited excellent UV protection. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of antibacterial temperature‐sensitive silver‐nanocomposite hydrogels from N‐isopropylacrylamide with green tea

This article reports the temperature‐sensitive, green tea (GT)‐based silver‐nanocomposite hydrogels for bacterial growth inactivation. The temperature‐sensitive hydrogels were prepared via free‐radical polymerization using temperature‐sensitive N‐isopropylacrylamide (NIPAM) monomer with GT as the hydrogel matrix. The nanocomposite hydrogels were encapsulated with silver ions via swelling method, which was later reduced to silver nanoparticles using Azadirachta indica leaf extract. The temperature‐sensitive silver nanocomposite hydrogels were analyzed by using Fourier transforms infrared, UV–visible spectroscopy, differential scanning calorimetry–thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The prepared hydrogels exhibited higher phase volume transition temperature than the NIPAM. The inhibition zone study of the inactivation of bacteria on the developed hydrogels was carried out against Gram negative (Escherichia coli) and Gram positive (Staphylococcus aureus), which revealed that the prepared hydrogels are helpful for the inactivation of these bacteria due to the high stabilization of antibacterial properties of the silver nanoparticles. The developed hydrogels are promising for biomedical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45739.     

Preparation and characterization of acrylic acid/itaconic acid hydrogel coatings containing silver nanoparticles

Hydrogel silver nanocomposites have been used in applications with excellent antibacterial performance. Acrylic acid (AA)/itaconic acid (IA) hydrogels silver nanocomposites were prepared and applied as a coating on a textile substrate. Hydrogel matrices were synthesized first by the polymerization of an AA/IA aqueous (80/20 v/v) solution and mixed with 2‐2‐azobis(2‐methylpropionamide) diclorohydrate and N,N′‐methylene bisacrylamide until the hydrogel was formed. Silver nanoparticles were generated throughout the hydrogel networks with an in situ method via the incorporation of the silver ions and subsequent reduction with sodium borohydride. Cotton (C) and cotton/polyester (CP) textile fibers were then coated with these hydrogel silver nanocomposites. The influence of these nanocomposite hydrogels on the properties of the textile fiber were investigated by infrared spectroscopy (attenuated total reflectance), scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and antibacterial tests against Pseudomona aeruginosa and Staphylococcus aureus. The better conditions, in which no serious aggregation of the silver nanoparticles occurred, were determined. It was proven that the textiles coated with hydrogels containing nanosilver had an excellent antibacterial abilities. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2713–2721, 2013     

Hybrid polyaniline–TiO2 nanocomposite Langmuir–Blodgett thin films: Self‐assembly and their characterization

Polyaniline (PANi)–titanium dioxide (TiO₂) nanocomposite materials were prepared by chemical polymerization of aniline doped with TiO₂ nanoparticles. Surface pressure–area (π‐A) isotherms of these nanocomposites show phase transformations in the monolayer during compression process. Multiple isotherms indicate that the monolayer of the nanocomposite material can retain its configuration during compression‐expansion cycles. Langmuir–Blodgett thin films of PANi–TiO₂ nanocomposite were deposited on the quartz and indium tin oxide coated conducting glass substrates. Fourier transfer infrared spectroscopy and UV–visible spectroscopy study indicates the presence of TiO₂ in PANi, whereas X‐ray Diffraction study confirmed the anatase phase of TiO₂ and particle size (～nm) of PANi–TiO₂. The morphology of Langmuir–Blodgett films of these nanocomposites was also characterized by atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41386.     

Fabrication of highly monodisperse CeO2@poly(methyl silsesquioxane) microspheres and their application in UV‐shielding films

Highly monodisperse CeO₂@poly(methyl silsesquioxane) (PMSQ) microspheres were successfully prepared by a facile chemical precipitation technique. The structures and properties of CeO₂@PMSQ were analyzed by Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy techniques. We confirmed that the PMSQ microspheres were uniformly coated by CeO₂ nanoparticles, with about an 8 nm crystallite diameter. Then, CeO₂@PMSQ was incorporated into a poly(vinyl alcohol) (PVA) matrix to fabricate PVA/CeO₂@PMSQ composite films by the casting of homogeneous solutions. The thermal and optical properties of the composite films were investigated by thermogravimetric analysis and UV–visible spectroscopy. The results show the high UV‐shielding efficiency of the composites: for a film containing 2.5 wt % CeO₂@PMSQ microspheres, about 80% UV light at wavelengths between 200 and 360 nm was absorbed, whereas the optical transparency in the visible region still remained very high. The addition of CeO2@PMSQ microspheres improved the thermal stability of the PVA films. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45065.     

Synthesis and characterization of rutile titanium dioxide/polyacrylate nanocomposites for applications in ultraviolet light‐shielding materials

Rutile titanium dioxide (TiO₂)/poly(methyl methacrylate‐acrylic acid‐butyl acrylate) nanocomposites were synthesized via seeded emulsion polymerization and characterized by Fourier transmission infrared, dynamic light scattering, X‐ray diffraction, ultraviolet–visible (UV–vis) spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis to study their UV‐shielding property. The effects of the nanoseed types, surfactant concentrations, and functional monomer amounts on the polymerization conversion, particle size, emulsion stability, and morphologies of the resulting nanocomposites were investigated. The dependence of UV‐shielding performance on the nanoparticle content and dispersion was also explored. The optimized results are obtained with 2 wt% of TiO₂ nanoparticles addition, and the effectiveness of UV shielding is significantly increased by using the synthesized rutile nano‐TiO₂/polyacrylates, for which the nanocomposite coating with a thickness of 200 μm could block up to 99.99% of UV light (≤350 nm) as confirmed by UV–vis spectrometry. POLYM. COMPOS., 36:8–16, 2015. © 2014 Society of Plastics Engineers     

Electrochemical synthesis and In situ spectroelectrochemistry of conducting NMPy‐TiO2 and ZnO polymer nanocomposites for Li secondary battery applications

Poly(N‐methylpyrrole) (PNMPy), poly(N‐methylpyrrole‐TiO₂) (PNMPy‐TiO₂), and poly (N‐methylpyrrole‐ZnO) (PNMPy‐ZnO) nanocomposites were synthesized by in situ electropolymerization for cathode active material of lithium secondary batteries. The charge–discharging behavior of a Li/LiClO₄/PNMPy battery was studied and compared with Li/LiClO₄/PNMPy‐nanocomposite batteries. The nanocomposites and PNMPy films were characterized by cyclic voltammetry, in situ resistivity measurements, in situ UV–visible, and Fourier transform infra‐red (FTIR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The differences between redox couples (ΔE) were obtained for polymer nanocomposites and PNMPy films. During redox scan, a negative shift of potential was observed for polymer nanocomposite films. Significant differences from in situ resistivity of nanocomposites and PNMPy films were obtained. The in situ UV–visible spectra for PNMPy and polymer nanocomposite films show the intermediate spectroscopic behavior between polymer nanocomposites and PNMPy films. The FTIR peaks of polymer nanocomposite films were found to shift to higher wavelengths in PNMPy films. The SEM and TEM micrographs of nanocomposite films show the presence of nanoparticle in PNMPy backbone clearly. The result suggests that the inorganic semiconductor particles were incorporated in organic conducting PNMPy, which consequently modifies the properties and morphology of the film significantly. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41526.     

Synthesis and characterizations of magnetite nanocomposite films for radiation shielding

Polyvinyl alcohol (PVA) films containing magnetite Fe₃O₄ nanoparticles have been prepared by co‐precipitation method for use in gamma ray shielding and protection. Characterizations of the magnetite/PVA nanocomposite films were investigated by X‐ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis spectroscopy, and magnetization measurements. TEM images showed that the synthesized magnetite particles had about 6–11 nm dimensions. Optical study's results revealed that the optical energy band gaps of thin films range between 1.82 and 2.81 eV at room temperature using UV–visible absorption spectroscopy. The saturation magnetization (MS) value measured by vibrating sample magnetometer VSM was found to be 8.1 emu/g with superparamagnetic nature. The radiation shielding properties such as linear attenuation coefficients (μ ) and half‐value thickness (HVT) for the magnetite nanocomposite films have been obtained experimentally for different photon energies. The results imply that these nanocomposites films are promising radiation shielding materials. POLYM. COMPOS., 38:974–980, 2017. © 2015 Society of Plastics Engineers     

High Performance Organic Coatings of Polypyrrole Embedded with Manganese Iron Oxide Nanoparticles for Corrosion Protection of Conductive Copper Surface

Herein, we report the formation of organic composite coating consists of epoxy (EP) reinforced para toluene sulphonic acid (PTSA) doped polypyrrole (PPy)–manganese iron oxide (MnFe₂O₂) as an efficient corrosion inhibitor for copper substrates. The PTSA doped PPy:MnFe₂O₂ nanocomposite was synthesized via in situ polymerization of PPy in the presence of MnFe₂O₂ nanoparticles. Structural features of the prepared samples were characterized through scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), UV–visible spectroscopy and thermogravimetric analysis (TGA). The PTSA doped PPy:MnFe₂O₂ nanocomposite shows excellent conductivity and improved dielectric performance in comparison to pure PPy. The anti-corrosion performance of this organic composite coating was analyzed through Tafel polarization curves, open circuit potential (OCP), corrosion resistance, impedance spectroscopy and oxygen permeability barrier tests. The nanocomposite coating on copper substrate shows superior corrosion protection efficiency (99%) in comparison to pure epoxy (22%). Adhesion strength of the nanocomposite coating shows significant enhancement due to strong dispersions of MnFe₂O₂ nanoparticles in the host matrix. Owing to its improved conductivity, excellent anti-corrosion performance along with superior mechanical properties, the organic nanocomposite coating reported in this work can potentially be used to protect the conductive copper surfaces from harsh corrosive environments.

     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

The optical properties of PVA/TiO2 composite nanofibers

The electrospun nanofibers emerge several advantages because of extremely high specific surface area and small pore size. This work studies the effect of PVA nanofibers diameter and nano‐sized TiO₂ on optical properties as reflectivity of light and color of a nanostructure assembly consisting polyvinyl alcohol and titanium dioxide (PVA/TiO₂) composite nanofibers prepared by electrospinning technique. The PVA/TiO₂ composite spinning solution was prepared through incorporation of TiO₂ nanoparticles as inorganic optical filler in polyvinyl alcohol (PVA) solution as an organic substrate using the ultrasonication method. The morphological and optical properties of collected composites nanofibers were highlighted using scanning electron microscopy (SEM) and reflective spectrophotometer (RS). The reflectance spectra indicated the less reflectance and lightness of composite with higher nanofiber diameter. Also, the reflectance and lightness of nanofibers decreased with increasing nano‐TiO₂ concentration. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Extrusion processing of green biocomposites: Compounding,fibrillation efficiency,and fiber dispersion

The efficiency of twin‐screw extrusion process to fibrillate cellulose fibers into micro/nanosize in the same step as the compounding of green bionanocomposites of thermoplastic starch (TPS) with 10 wt % fibers was examined. The effect of the processing setup on micro/nanofibrillation and fiber dispersion/distribution in starch was studied using two types of cellulose fibers: bleached wood fibers and TEMPO‐oxidized cellulose fibers. A composite with cellulose nanofibers was prepared to examine the nanofiber distribution and dispersion in the starch and to compare the properties with the composites containing cellulose fibers. Optical microscopy, scanning electron microscopy, and UV/Vis spectroscopy showed that fibers were not nanofibrillated in the extrusion, but good dispersion and distribution of fibers in the starch matrix was obtained. The addition of cellulose fibers enhanced the mechanical properties of the TPS. Moisture uptake study revealed that the material containing TEMPO‐oxidized fibers had higher moisture absorption than the other composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39981.     

Structural and thermal characterization of poly(2‐chloroaniline)/red mud nanocomposite materials

We report the synthesis and characterization of a series of conducting poly(2‐chloroaniline) (P2ClAn)/red mud (RM) nanocomposite materials. The polymerization of 2‐chloroaniline in an aqueous medium in the presence of (NH₄)₂S₂O₈ and RM resulted in the formation of a nanocomposite (P2ClAn/RM). The extent of P2ClAn loading in the composites increased with increasing oxidant and monomer concentrations but decreased with RM. The properties of the nanocomposites were characterized with Fourier transform infrared (FTIR), ultraviolet–visible (UV–vis), conductivity measurements, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry analysis. The inclusion of P2ClAn in the composites was confirmed by FTIR studies. The UV–vis spectra of P2ClAn/RM nanocomposites were similar to that of P2ClAn. The conductivity changed in all the composites prepared under various conditions. Thermogravimetric analyses revealed the enhanced thermal stabilities of the nanocomposites with respect to P2ClAn. Morphological images of the as‐synthesized materials were also investigated with scanning electron microscopy and environmental scanning electron microscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006