Enhanced photoresponse and photocatalytic activities of graphene quantum dots sensitized Ag/TiO2 thin film

TiO₂ thin films were fabricated through hydrothermal method. Silver nanoparticles were loaded on TiO₂ thin films via photoreduction technique. Subsequently, the graphene quantum dots (GQDs) were spin‐coated on the Ag/TiO₂ nanocomposites thin films. The crystal structure, surface morphology and UV‐vis absorbance were tested by XRD, SEM and ultraviolet‐visible spectrophotometer. These results indicated that Ag nanoparticles and GQDs are anchored on the TiO₂ nanorods. Absorbance of Ag/TiO₂ and GQDs/Ag/TiO₂ nanocomposite thin films have been extended into the visible region. Visible‐light response of the samples were investigated by electrochemical workstation. The photoresponse of the sample can be enhanced by sensitization of the Ag nanoparticles and GQDs. The enhanced visible‐light response may be due to the surface plasmon resonance of silver nanoparticles and visible absorbance of GQDs. The highest photocatalytic activity has been observed in the 9‐GQDs/Ag/TiO₂ composite thin film. The efficient charge separation and transportation can be achieved by introducing the Ag nanoparticles and GQDs in the TiO₂ thin film.     

Photoactivity of Poly(lactic acid) nanocomposites modulated by TiO2 nanofillers

Photoactivity of poly(lactic acid) (PLA) nanocomposites is of great interest for rational design of products for either short‐term/single‐use or long‐term/durable applications. We prepared PLA/TiO₂ nanocomposite films through a solution mixing/film casting method. Results showed that photodegradability/photostability of PLA could be well modulated by selecting appropriate TiO₂ nanofillers. TiO₂ nanoparticles and nanowires were characterized using X‐ray diffraction, UV–Vis–NIR spectrophotometer, and scanning electron microscopy. Changes in color, weight, structure, thermal stability, and phase transitions of PLA and nanocomposite films before and after UV irradiation were evaluated to study photoactivity characteristics. Pure PLA exhibited moderate photodegradability, but the photodegradability and photostability of PLA nanocomposites (PNA) were significantly enhanced by NanoActive (NA) TiO₂ nanoparticles and A type TiO₂ nanowires, respectively. Pure PLA had a weight loss of 27% after 38 days of UV irradiation. The weight loss of photodegradable (PD) PNA (PNA = PLA with 1% NA TiO₂) reached 38%, whereas that of photostable (PS) nanocomposites (P3AW) (P3AW = PLA with 3% A type TiO₂ nanowire) was only 5%. PD PLA exhibited characteristic peaks of carboxylic acid OH stretching and C?C double bond after UV irradiation in Fourier‐transform infrared spectra, whereas spectra of PS PLA remained almost the same. Thermal decomposition temperatures, glass transition temperatures, and melting temperatures of PD PLAs decreased dramatically after UV irradiation, but no obvious changes were observed for those of PS PLAs. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40241.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

Structure and properties of composite films prepared from cellulose and nanocrystalline titanium dioxide particles

Composite films were successfully prepared from cellulose and two kinds of nanocrystalline TiO₂ particles in a NaOH/urea aqueous solution (7.5 : 11 in wt %) by coagulation with H₂SO₄ solution. The structure, morphology, and properties of the films were characterized by transmission electron microscopy, scanning electron microscopy, X‐ray diffraction, TGA, tensile testing, UV–vis spectroscopy, and antibacterial test. The results indicated that TiO₂ particles in a cellulose matrix maintained the original nanocrystalline structure and properties. TiO₂(I) (anatase) and TiO₂(II) (the mixture of anatase and rutile) particles exhibited a certain miscibility with cellulose. The tensile strength of two kinds of composite films was higher than 70 and 75 MPa, when the content of TiO₂(I) and TiO₂(II) was 4 and 11 wt %, respectively. The cellulose composite films containing nanocrystalline TiO₂ particles displayed distinct antibacterial abilities and excellent UV absorption. This work provides a potential way for preparing functional composite materials from cellulose and inorganic nanoparticles in a NaOH/urea aqueous solution, without a destruction of the structure and properties of the particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3600–3608, 2006     

Microwave photocatalysis III. Transition metal ion‐doped TiO2 thin films on mercury electrodeless discharge lamps: preparation,characterization and their effect on the photocatalytic degradation of mono‐chloroacetic acid and Rhodamine B

BACKGROUND: Mercury electrodeless discharge lamps (Hg‐EDLs) were used to generate UV radiation when exposed to a microwave field. EDLs were coated with doped TiO₂ in the form of thin films containing transition metal ions Mⁿ⁺ (M = Fe, Co, Ni, V, Cr, Mn, Zr, Ag). Photocatalytic degradation of mono‐chloroacetic acid (MCAA) to HCl, CO₂, and H₂O, and decomposition of Rhodamine B on the thin films were investigated in detail. RESULTS: Polycrystalline thin doped TiO₂ films were prepared by dip‐coating of EDL via a sol–gel method using titanium n‐butoxide, acetylacetone, and a transition metal acetylacetonate. The films were characterized by Raman spectroscopy, UV/Vis absorption spectroscopy, X‐ray photoelectron spectroscopy (XPS), electron microprobe analysis and by atomic force microscopy (AFM). The photocatalytic activity of doped TiO₂ films was monitored in the decomposition of Rhodamine B in water. Compared with the pure TiO₂ film, the UV/Vis spectra of V, Zr and Ag‐doped TiO₂ showed significant absorption in the visible region, and hence the photocatalytic degradation of MCAA had increased. The best apparent degradation rate constant (0.0125 min^?1), which was higher than that on the pure TiO₂ film by a factor of 1.7, was obtained with the Ag(3%)/TiO₂ photocatalyst. The effect of doping level of vanadium acetylacetonate on the photocatalytic efficiency of the V‐doped TiO₂ was determined. CONCLUSIONS: Transition metal ion‐doped TiO₂ thin films showed significant absorption in the visible region. The metal doped TiO₂ photocatalyst (with an appropriate amount of V, Zr and Ag) on the Hg‐EDLs increased the degradation efficiency of MCAA in a microwave field. Copyright © 2009 Society of Chemical Industry     

The interfacial effect of TiO2–Ag core–shell micro‐/nanowires on poly(arylene ether nitrile)

Novel TiO₂–Ag core–shell micro‐/nanowires (TiO₂ shell coating on Ag core) have been successfully prepared via a solvent–thermal method. Energy dispersive spectroscopy and X‐ray diffraction analyses revealed that the micro‐/nanowires were composed of Ag, Ti and O elements, and Ag was face‐centered cubic whereas TiO₂ was mainly amorphous. Interestingly, scanning electron microscopy (SEM) and transmission electron microscopy results showed that most of the TiO₂ bristles were perpendicular to and uniformly studded on the surface of the Ag cores. Subsequently, TiO₂–Ag/poly(arylene ether nitrile) (PEN) composite films were prepared via a solution‐casting method in order to investigate the effect of TiO₂–Ag on the PEN matrix. SEM images showed that there was good interfacial adhesion between fillers and PEN matrix owing to the special bristle‐like structure. Thermal analysis results showed that the TiO₂–Ag/PEN composite films possessed excellent thermal properties endowed by the PEN matrix. The dielectric constant of the composite films increased to 9.3 at 100 Hz when the TiO₂–Ag loading reached 40 wt%. Rheology measurements revealed that the network formed by TiO₂–Ag was sensitive to shear stress and nearly time independent. © 2013 Society of Chemical Industry     

Compatibilization and ultraviolet blocking of PLA/PCL blends via interfacial localization of titanium dioxide nanoparticles

In this work, the effect of TiO₂ addition over morphological and ultraviolet (UV) blocking properties of poly(lactic acid) (PLA) and poly(?‐caprolactone) (PCL) blends was investigated. The micrographs showed a partially co‐continuous structure in the PLA/PCL blend with 42/58 (wt %/wt %) and the TiO₂ nanoparticles addition leads to a structural phase inversion, i.e., continuous PCL and partially continuous PLA with a dispersed portion. TiO₂ nanoparticles were observed to be preferably localized at the interface of the two phases due to kinetic effects (large difference between the melting temperatures) and nanoparticle geometry (low aspect ratios). An adhesion improvement between the phases and morphological stability were observed with the addition of TiO₂ nanoparticles. This behavior indicates that the nanoparticles can act as compatibilizers due to their localization at the interface between the two phases. The UV light absorption and transmission percolation threshold occurred with 1.5% TiO₂ in the 42PLA/52PCL blend. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45813.     

UV-curable polyurethane acrylate–Ag/TiO2 nanocomposites with superior UV light antibacterial activity

Polyurethane acrylate (PUA)–Ag/TiO₂ nanocomposites were synthesized through in situ polymerization. The well-dispersed Ag/TiO₂ nanorods serve as photoinitiator. Meanwhile, the PUA–Ag/TiO₂ nanocomposite films exhibit superior activity toward the photocatalytic degradation of Escherichia coli under UV light. The excellent UV curing and antibacterial activities can be ascribed to the synergistic effect of Ag and TiO₂, which promotes the effective electron/hole separation and thus generates various reactive species. Thin films with these nanoparticles are more hydrophilic after UV illumination. And the antibacterial mechanism of the UV-curable PUA–Ag/TiO₂ nanocomposites was proposed.     

Aerosol processing of Ag/TiO2 composite nanoparticles for enhanced photocatalytic water treatment under UV and visible light irradiation

In this study, we investigated the effect of Ag addition on the photocatalytic reactivity of TiO₂ nanoparticles (NPs). Controlled amounts of Ag were incorporated in TiO₂ NPs using aerosol spray pyrolysis and subsequent calcination. Ag/TiO₂ composite NPs containing different amounts of Ag (e.g., 0, 0.5, 1, 2, and 5 wt%) were successfully fabricated. The photodegradation performances of the as-prepared Ag/TiO₂ composite NPs were tested using methylene blue (MB) solution under UV and visible light irradiation. Upon increasing the Ag content to 1 wt%, the resulting Ag/TiO₂ composite NPs exhibited increased photocatalytic reactivity due to lowered bandgap energy, which promoted both charge generation and separation. However, when the Ag content exceeded 1 wt%, the photocatalytic reactivity of the resulting Ag/TiO₂ composite NPs was considerably deteriorated due to the masking effect of the excess Ag on the reactive sites of TiO₂. Hence, the incorporation of an optimized amount of Ag in the TiO₂ matrix promotes the photocatalytic reactivity of Ag/TiO₂ composite NPs by controlling their bandgap energy and charge generation and separation processes. These results could lead to the development of photodegradation active substances for water treatment in organic solutions.     

Preparation and antibacterial activity of polyvinyl alcohol/regenerated silk fibroin composite fibers containing Ag nanoparticles

Polyvinyl alcohol (PVA)/regenerated silk fibroin (SF)/AgNO₃ composite nanofibers were prepared by electrospinning. A large number of nanoparticles containing silver were generated in situ and well‐dispersed nanoparticles were confirmed by transmission electron microscopy (TEM) intuitionally. Ultraviolet (UV)‐visible spectroscopy and X‐ray diffraction (XRD) patterns indicated that nanoparticles containing Ag were present both in blend solution and in composite nanofibers after heat treatment and after subsequent UV irradiation. By annealing the nanofibers, Ag⁺ therein was reduced so as to produce nanoparticles containing silver. By combining heat treatment with UV irradiation, Ag⁺ was transformed into Ag clusters and further oxidized into Ag₃O₄ and Ag₂O₂. Especially size of the nanoparticles increased with heat treatment and subsequent UV irradiation. This indicated that the nanoparticles containing silver could be regulated by heat treatment and UV irradiation. The antimicrobial activity of heat‐treated composite nanofibers was evaluated by Halo test method and the resultant nanofibers showed very strong antimicrobial activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,physical properties,and characterization of starch‐based blend films by adding nano‐sized TiO2/poly(methyl metacrylate‐co‐acrylamide)

The purpose of this study was to improve the physical properties and to expand the application range of starch‐based blend films added nano‐sized TiO₂/poly(methyl methacrylate‐co‐acrylamide) (PMMA‐co‐AM). Starch‐based blend films were prepared by using corn starch, polyvinyl alcohol (PVA), nano‐sized PMMA‐co‐AM, nano‐sized TiO₂/PMMA‐co‐AM particles, and additives, i.e., glycerol (GL) and citric acid (CA). Nano‐sized PMMA‐co‐AM was synthesized by emulsion polymerization and TiO₂ nanoparticles were also prepared by using sol–gel method. Nano‐sized TiO₂/PMMA‐co‐AM particles were synthesized by wet milling for 48 h. The morphology and crystallinity of TiO₂, nano‐sized PMMA‐co‐AM and TiO₂/PMMA‐co‐AM particles were investigated by using the scanning electron microscope (SEM) and X‐ray diffractometer (XRD). In addition, the functional groups of the TiO₂/PMMA‐co‐AM particles were characterized by IR spectrophotometry (FTIR). The physical properties such as tensile strength (TS), elongation at break (%E), degree of swelling (DS), and solubility (S) of starch‐based films were evaluated. It was found that the adding of nano‐sized particles can greatly improve the physical properties of the prepared films. The photocatalytic degradability of starch/PVA/nano‐sized TiO₂/PMMA‐co‐AM composite films was evaluated using methylene blue (MB) and acetaldehyde (ATA) as photodegradation target under UV and visible light. The degree of decomposition (C/C₀) of MB and ATA for the films containing TiO₂ and CA was 0.506 and 0.088 under UV light irradiation and 0.586 (MB) and 0.631 (ATA) under visible light irradiation, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Bi2O3 nanoparticles incorporated porous TiO2 films as an effective p‐n junction with enhanced photocatalytic activity

Porous TiO₂ films decorated with Bi₂O₃ nanoparticles are fabricated via alkali‐hydrothermal of titanium (Ti) plate by varying the reaction time. The amorphous TiO₂ is transformed into anatase after annealing the films at 500°C in air. The p‐type Bi₂O₃ nanoparticles are successfully assembled on the surface of porous n‐type TiO₂ films through the ultrasonic‐assisted successive ionic layer adsorption and reaction (SILAR) technique to form Bi₂O₃/TiO₂ nanostructure by the two cycles. The obtained Bi₂O₃/TiO₂ films are consisted of a well‐ordered and uniform porous structure with an average pore diameter of about 100‐200 nm containing homogeneously dispersed Bi₂O₃ nanoparticles of ~5 nm diameter. Moreover, the resultant composites present excellent photocatalytic performance toward methyl blue (MB) degradation under UV and visible light irradiation, which could be mainly ascribed to the enhanced light adsorption capacity of unique composite structure and the formation of p‐n heterojunctions in the porous Bi₂O₃/TiO₂ films. This research is helpful to design and construct the highly efficient heterogeneous semiconductor photocatalysts.     

Simultaneous Laser‐Induced Reduction and Nitrogen Doping of Graphene Oxide in Titanium Oxide/Graphene Oxide Composites

Titanium oxide/graphene oxide nanocomposite thin films were grown by ultraviolet (UV) matrix‐assisted pulsed laser evaporation (MAPLE) technique in controlled oxygen or nitrogen atmospheres. The effect of graphene oxide addition and laser‐induced reduction as well as nitrogen doping on the wetting behavior and photoactive properties of titanium oxide thin films was investigated. Hydrophobic to hydrophilic conversion of titanium oxide films takes place progressively as the relative amount of graphene oxide in the MAPLE composite target increases. Nitrogen doping leads to further decrease of the static contact angle of the composite films. The photoactive properties of the synthesized materials were investigated through the evolution of contact angle under UV light irradiation. Wetting properties of both TiO₂ and TiO₂/GO nanocomposite thin films improved upon exposure to UV light.     

Fabrication of TiO2‒Ag nanocomposite thin films via one-step gas-phase deposition

In this work, TiO₂‒Ag nanocomposite thin films were fabricated for the first time via simultaneous plasma-enhanced chemical vapor deposition and physical vapor deposition of TiO₂ and Ag nanoparticles in the gas-phase, respectively. The presence of Ag nanoparticles in the prepared nanocomposites has been confirmed using transmission electron microscopy and energy dispersive X-ray spectrometry techniques. The obtained electron microscopy images showed that the average size of TiO₂‒Ag nanoparticles was larger than that of pristine TiO₂. Moreover, the temperature of the anatase transformation into the rutile phase was decreased due to the presence of Ag nanoparticles in the TiO₂ matrix, while the photocatalytic activity of the produced nanocomposite (estimated by studying the degradation of methylene blue aqueous solution under UV irradiation) was 35% greater than that of pristine TiO₂. Therefore, the addition of Ag nanoparticles into the TiO₂ matrix significantly affected the morphology, phase transformation temperature, and photocatalytic performance of the fabricated material.     

Structural stability of photodegradable poly(l-lactic acid)/PE/TiO2 nanocomposites through TiO2 nanospheres and TiO2 nanotubes incorporation

Photodegradation of PLA/PE, PLA/PE/TiO₂ nanospheres and PLA/PE/TiO₂ nanotubes was obtained under simulated sunlight. The nanocomposites were analyzed by infrared spectroscopy, scanning electron microscopy and tensile-deformation measurements. TiO₂ nanospheres and TiO₂ nanotubes were found to present different effects on the crystallinity of PLA and a straight correlation between structural organization and photostability was observed. According to the results, TiO₂ promotes the degradation of PLA and PE, affecting the organizational level of the polymers. By adding TiO₂ nanoparticles to the PLA/PE films, vibration modes characteristic of degradation products were promptly observed and the lifetime of the polymer decreased when compared to the PLA/PE without TiO₂ nanoparticles. Mechanical measurements showed an improvement of the mechanical properties when adding the TiO₂ nanoparticles.     

Two-Functional Direct Current Sputtered Silver-Containing Titanium Dioxide Thin Films

The article reports on structure, mechanical, optical, photocatalytic and biocidal properties of Ti–Ag–O films. The Ti–Ag–O films were reactively sputter-deposited from a composed Ti/Ag target at different partial pressures of oxygen on unheated glass substrate held on floating potential U _fl. It was found that addition of ~2 at.% of Ag into TiO₂ film has no negative influence on UV-induced hydrophilicity of TiO₂ film. Thick (~1,500 nm) TiO₂/Ag films containing (200) anatase phase exhibit the best hydrophilicity with water droplet contact angle (WDCA) lower than 10° after UV irradiation for 20 min. Thick (~1,500 nm) TiO₂/Ag films exhibited a better UV-induced hydrophilicity compared to that of thinner (~700 nm) TiO2/Ag films. Further it was found that hydrophilic TiO₂/Ag films exhibit a strong biocidal effect under both the visible light and the UV irradiation with 100% killing efficiency of Escherichia coli ATCC 10536 after UV irradiation for 20 min. Reported results show that single layer of TiO₂ with Ag distributed in its whole volume exhibits, after UV irradiation, simultaneously two functions: (1) excellent hydrophilicity with WDCA < 10° and (2) strong power to kill E. coli even under visible light due to direct toxicity of Ag.     

Polyvinyl alcohol-based fiber membranes with high strength and ultraviolet shielding properties for enhancing the shelf life of grapes

Currently, the rising environmental concerns caused by nonbiodegradable food packaging materials have promoted the research and development of biodegradable alternatives. Polyvinyl alcohol (PVA) was selected as the substrate, and zinc oxide nanoparticles (ZnONPs) and titanium dioxide nanoparticles (TiO₂NPs) were blended and modified with PVA, respectively. Based on the electrostatic spinning technology to prepare fiber membranes with high strength and UV blocking properties for grapes preservation. The study indicated that the tensile strength of PVA fiber membranes increased by 243% and 209% when ZnONPs and TiO₂NPs were added at 1%, respectively. Under UV radiation, the PVA/ZnO composite membranes exhibited superior UV absorption than the PVA/TiO₂ composite membranes. After conducting TG tests, it was found that the addition of ZnONPs decreased the thermal stability of the fiber membranes, while TiO₂NPs could improve the thermal stability. Both composite membranes could extend grapes' shelf life, but the PVA/ZnO composite membranes were more effective at maintaining freshness than the PVA/TiO₂ composite membranes.     

Hydrophobic and tribological behaviors of a poly(p‐phenylene benzobisoxazole) fabric composite reinforced with nano‐TiO2

1H,1H,2H,2H‐Perfluorooctyl trichlorosilane (PFTS) was used to modify TiO₂ nanoparticles, and hydrophobic PFTS–TiO₂ nanoparticles were obtained by an ultrasonic reaction method. The PFTS–TiO₂ surface morphological and hydrophobic properties were analyzed with scanning electron microscopy (SEM), Fourier transform infrared spectrometry, and contact angle (CA) testing. Then, the poly(p‐phenylene benzobisoxazole) fabric–phenolic composite filled with PFTS–TiO₂ as a lubricant additive was fabricated by a dip‐coating process. The tribological properties of the composite were investigated, and the wear surface morphology was observed by SEM. The experimental results show that the water CA of the composite filled with PFTS–TiO₂ was 158°, and the composite containing 4 wt % PFTS–TiO₂ exhibited excellent antifriction and abrasion resistance. The hydrophobic surface of the composite showed excellent durable performance with a static water CA of 126.7° after abrasion. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45077.     

Effect of titanium dioxide on the UV‐C ageing behavior of silicone rubber

The ultraviolet (UV)‐C ageing behavior of silicone rubber (SiR) incorporated with titanium dioxide nanoparticles (nano‐TiO₂) was studied under UV‐C radiation. The SiR incorporated with nano‐TiO₂ displayed excellent physical properties when exposed to UV‐C radiation. With the increase of the ageing time, the SiR with nano‐TiO₂ showed no significant change in crosslinking density and Shore A hardness. Moreover, compared with the SiR without nano‐TiO₂, the SiR incorporated with nano‐TiO₂ also exhibited high retention ratio in tensile properties, especially elongation at break. It was found that nano‐TiO₂ was a good ultraviolet light stabilizer during the UV ageing process of SiR and the optimum content of nano‐TiO₂ was 2 phr. The results of Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy showed the appearance of O? H and C?O and the decrease of the intensity of SiC₂O₂ in SiR samples during the process of UV‐C ageing. Based on these results, a possible UV ageing mechanism of SiR could be proposed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46099.     

Preparation and characterization of TiO2 and polymer nanocomposite films with high refractive index

Novel nanocomposite films of TiO₂ nanoparticles and hydrophobic polymers having polar groups, poly (bisphenol‐A and epichlorohydrin) or copolymer of styrene and maleic anhydride, with high refractive indices, high transparency, no color, solvent‐resistance, good thermal stability, and mechanical properties were prepared by incorporating surface‐modified TiO₂ nanoparticles into polymer matrices. In the process of preparing colloidal solution of TiO₂ nanoparticles, severe aggregation of particles can be reduced by surface modification using carboxylic acids and long‐chain alkyl amines. These TiO₂ nanoparticles dispersed in solvents were found not to aggregate after mixing with polymer solutions. Transparent colorless free‐standing films were obtained by drying a mixture of TiO₂ nanoparticles colloidal solution and polymer solutions in vacuum. Transmission electronic microscopic studies of the films suggest that the TiO₂ nanoparticles of 3–6 nm in diameter were dispersed in polymer matrices while maintaining their original size. Thermogravimetric analysis results indicate that the nanocomposite film has good thermal stability and the weight fraction of observed TiO₂ nanoparticles in the film is in good accordance with that of theoretical calculations. The refractive index of nanocomposite films of TiO₂ and poly(bisphenol‐A and epichlorohydrin) was in the range of 1.58–1.81 at 589 nm, which linearly increased with the content of TiO₂ nanoparticles from 0 to 80 wt %. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007