Hybrid organic/inorganic dendritic triblock copolymers: Synthesis,nanostructure characterization,and micellar behavior

A new class of amphiphilic dendritic ABA triblock copolymers, which is based on organic linear polyethylene oxide (PEO) and inorganic dendritic carbosiloxane (CSO) was synthesized. The strategy used in synthesizing these materials is based on divergent method using hydrosilylation‐alcoholysis cycles. The reaction conditions and structural features of dendrimers were analyzed by different physicochemical techniques such as: GPC, NMR, UV spectroscopy, DSC, and viscometry. The generational limit of dendrimer after the first generation, OSC‐D‐PEO‐D‐CSO, forced us to employ HSiCl₂CH₃ as branching reagent. Also further hydrosilylation of the third generation yielded an irregular structure species. Self‐assembling and morphological studies of first, OSC‐D‐PEO‐D‐CSO, and second, OSC‐D‐PEO‐D‐CSO, generations in aqueous medium were monitored by using fluorescence, TEM and DLS techniques. However, the dendritic block copolymer with third generation, OSC‐D‐PEO‐D‐CSO, could not be dispersed in aqueous phase. The diameters of denderitic micelles had a narrow distribution in the ranges of 69 and 88 nm, respectively. Although the micelles were stable even in first generation, partition equilibrium constants of pyrene and critical micelle concentration in both of dendritic micelles imply that the micellar behaviors of the supramolecules strongly depend on the hydrophobic block's size in which increasing generation effectively promoted the micelle formation. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and adsorption properties of metal ions of novel azacrown ether crosslinked chitosan

Azacrown ether chitosan (CTSC) was synthesized by the reaction of chitosan with N‐allyl benzo 15‐crown‐5 crown ether. Azacrown ether crosslinked chitosan (CCTSC) was prepared by the crosslinked reaction of CTSC and epichlorodydrin. Their structures were confirmed by infrared spectral analysis and X‐ray diffraction analysis. The adsorption properties of CTSC and CCTSC for metal ions were also investigated. The experimental results showed that the two chitosan derivatives not only had a good capacity to adsorb Pd²⁺ and Ag⁺ but also was highly selective for Pd²⁺ and Ag⁺ in the coexistence system containing other metal ions. At 20°C ± 1°C and pH = 4, the adsorption capacity of CTSC and CCTSC for Pd²⁺ was 186.1 and 173.1 mg/g, respectively; and for Ag⁺ was 90.2 and 56.5 mg/g, respectively. The selectivity coefficients were K = 6.99, K = ∞, K = 35.38, K = ∞ for CTSC and K = 10.66, K = ∞, K = 85.45, K = ∞ for CCTSC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2705–2709, 2006     

Composition and temperature effects on air separation through liquid crystalline alkyl cellulose membranes

The air separation through triheptyl cellulose (THC)/ethyl cellulose (EC) blend membranes containing no more than 20 wt % THC at the temperature range from 298 to 358 K was investigated using a variable volume method. The air-separation ability for the THC/EC membranes were greater than that for the THC-free pure EC membrane. P for the THC/EC membranes was between 1.06–8.89 × 10^?9 cm³ (STP) cm/cm² s cmHg and P/P 3.04–3.66. The THC/EC membrane showed a unique trend in its P/P ? P relationship, i.e., the magnitude of P/P increased simultaneously with that of P. The THC/EC membrane yielded a maximum oxygen concentration in the oxygen-enriched air (OEA) of 39.5% at an OEA flux of 6.99 × 10^?4 cm³ (STP)/s cm² for a pressure difference of 0.43 MPa at 358 K. After 300 h of measurement at 0.40 MPa and 313 K, the efficiency of the concentrating oxygen was almost constant. © 1994 John Wiley & Sons, Inc.     

Application of poly(phthalazinone ether sulfone ketone)s to gas membrane separation

A series of poly(phthalazinone ether sulfone ketone) (PPESK) copolymers containing different component ratios of bis(4‐fluorodiphenyl) ketone and bis(4‐chlorodiphenyl)sulfone with respect to a certain amount of 4‐(4‐hydroxyphenyl)‐2,3‐phthalazin‐1‐one were synthesized by polycondensation. Glass transition temperatures of these polymers were adjusted from 263°C to 305°C by changing the ratios of reactants. Gas permeability and selectivity of the dense membranes of the polymers for three kinds of gases (CO₂, O₂, and N₂) were determined at different temperatures. The result indicated that the membrane of PPESK (S/K = 1/1, mol ratio) had an excellent gas separation property. Permeability of the polymer membranes for CO₂, O₂, and N₂ was P = 4.121 barrier, P = 0.674 barrier, and P = 0.0891 barrier, respectively. Separation factors of α and α were 7.6 and 46, respectively. New material was made into a composite membrane with silicone rubber for blocking up leaks and defects on the surface of its nonsymmetrical membrane. As a result of the test, permeability of the composite membrane was J = 7.2 × 10⁻⁶ cm³ (STP) cm⁻² S⁻¹ cm⁻¹ Hg and J = 0.99 × 10⁻⁶ cm³ (STP) cm⁻² S⁻¹ cm⁻¹ Hg, whereas the α was still higher than 7. These showed that PPESKs had a bright prospect as the potential membrane material for high‐temperature gas separation. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2385–2390, 1999     

Gas permeabilities of poly(trimethylsilylpropyne) membranes surface modified with CF4 plasma

Surface fluorination of poly(trimethylsilylpropyne) (PTMSP) membranes by CF₄ plasma was studied. The surface fluorination of the membranes was carried out in an atmosphere of CF₄ in a capacitively coupled discharge apparatus with external electrodes. Dramatic increase in selectivity (P/P) was observed. The effect of fluorination conditions such as duration of treatment and discharge power on the permeabilities of the membranes was studied. X-ray photoelectron spectrometric data of modified PTMSP membranes showed a drastic alternation in the surface layer. The P and P/P of the membranes were observed to be dependent on the F/C atomic ratio. At F/C > 1, the P/P value of the membranes could be more than four. © 1993 John Wiley & Sons, Inc.     

Permeability of dense (homogeneous) cellulose acetate membranes to methane,carbon dioxide,and their mixtures at elevated pressures

Mean permeability coefficients for CH₄ and CO₂ (P̄ and P̄) in cellulose acetate (CA, DS = 2.45) were determined at 35°C (95°F) and at pressures up to about 54 atm (800 psia). The measurements were made with pure CH₄ and CO₂ as well as with CH₄/CO₂ mixtures containing 9.7, 24.0, and 46.1 mol % CO₂. In the measurements with the pure gases, P̄ was found to decrease with increasing pressure, as expected from the “dual-mode” sorption model. By contrast, P̄ passes through a minimum and then increases with increasing pressure, probably due to the plasticization (swelling) of CA by CO₂. The values of P̄ and P̄ determined with the mixtures containing 9.7 and 24.0 mol % CO₂ decrease with increasing total pressure; this behavior is adequately described by the extended “dual-mode” sorption model for mixtures. By contrast, the values of P̄ and P̄ obtained with the mixture containing 46.1 mol % CO₂ pass through a minimum and then increase as the total pressure is raised, probably also due to the plasticization of CA by CO₂. The CO₂/CH₄ selectivity (≡P̄/P̄) of the CA membrances decreases with increasing total pressure and, at constant pressure, decreases with increasing CO₂ concentration in the feed mixture. The effects of exposing the CA membranes to high-pressure CO₂ prior to the permeability measurements (“conditioning” effects) on P̄ and P̄ have also been studied. © 1996 John Wiley & Sons, Inc.     

Preparation and adsorption behavior for metal of chitosan crosslinked by dihydroxy azacrown ether

A new type of crosslinked chitosan was prepared using Dihydroxy azacrown ether as the crosslinking agent. Its structure was confirmed by elemental analysis, Fourier transform infrared (FTIR) spectra analysis, solid‐state ¹³C nuclear magnetic resonance (NMR) analysis, and X‐ray diffraction analysis. Its static adsorption properties for Ag⁺, Cd²⁺, Hg²⁺, and Co²⁺ were studied. The experimental results showed that the Dihydroxy azacrown ether crosslinked chitosan has good adsorption capacities and high selectivity for adsorption of Ag⁺ with the coexistence of Hg²⁺ and Co²⁺. The selectivity coefficients of crosslinked chitosan are k/ = 5.47, k/ = 4.64, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 530–535, 2002     

Solution and diffusion properties of cyclohexane,cyclohexanol, and cyclohexanone in poly(ethylene glycol) by inverse gas chromatography

The solution and diffusion properties of cyclohexane, cyclohexanol, and cyclohexanone in poly(ethylene glycol) (PEG) and crosslinked PEG have been studied in the temperature range of 368.15 to 403.15 K using inverse gas chromatography (IGC) technique. The infinite dilute activity coefficient (Ω) and diffusion coefficient (D) have been determined for the above solvent/polymer systems. Accordingly, several thermodynamic functions, the diffusion pre‐exponential factor, and activation energy have been attained. The results showed a decrease in Ω and an increase in D with rising temperature. The order of the relative magnitude of Ω and D of the solvents were explained by comparing their interactions with the polymer and their collision diameters, respectively. Moreover, Ω and D in crosslinked PEG were smaller than those in PEG at various temperatures. The analysis of Ω, the infinite dilute selectivity and capacity showed the possibility of using crosslinked PEG as an appropriate membrane material for the separation of cyclohexane, cyclohexanol, and cyclohexanone mixture. A thermodynamic study also implied that the solvent sorptions in the polymers were all enthalpically driven in the experimental range. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Oxygen/nitrogen transport in ionomer composite membranes containing a cobalt Schiff base complex

Different amounts of (N,N′‐disalicylideneethylenediamin)cobalt (CoS) were blended to a cobalt (II)‐neutralized sulfonated EPDM (Co^(II)‐S‐EPDM) ionomer membrane to enhance its oxygen‐enriching ability. Various influence factors on permeabilities and selectivities of the composite membranes, such as the gas pressure difference, the CoS content, and the testing temperature have been investigated. Oxygen permeability coefficients (P) and oxygen/nitrogen separation factors (α) increased simultaneously by decreasing the gas pressure difference or by increasing the CoS content. In comparison with the EPDM matrix, P and α of Co^(II)‐S‐EPDM–CoS (85/15) composite membrane increased from 11.0 Barrer and 4.38 to 37.0 Barrer and 9.60. Obvious enhancement in the oxygen‐enriching property shows that the dual actions of cobaltous ion crosslinking and addition of an abundant cobalt complex may be an effective way to improve a rubbery polymer membrane. As high as 15 wt % of the CoS could be blended. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1071–1077, 1999     

Study on the adsorption properties of novel crown ether crosslinked chitosan for metal ions

We first synthesized N‐benzylidene chitosan (CTB) by the reaction of benzaldehyde with chitosan (CTS). Chitosan‐dibenzo‐18‐crown‐6 crown ether bearing Schiff‐base group (CTBD) and chitosan‐dibenzo‐18‐crown‐6 crown ether (CTSD) were prepared by the reaction of 4,4′‐dibromodibenzo‐18‐crown‐6 crown ether with CTB and CTS, respectively. Their structures were confirmed by Fourier transform infrared spectral analysis and X‐ray powder diffraction analysis. These novel crown ether crosslinked CTSs have space net structures with embedded crown ethers and contain the double structures and properties of CTS and crown ethers. They have stronger complexation with and better selectivity for metal ions than corresponding crown ethers and CTS. Moreover, these novel CTS derivatives can be used to separate and preconcentrate heavy or precious metal ions in aqueous environments. From this practical viewpoint, we studied the adsorption and selectivity properties of CTB, CTBD, and CTSD for Ag⁺, Cu²⁺, Pb²⁺, and Ni²⁺. The experimental results showed that CTBD had better adsorption properties and higher selectivity for metal ions than CTSD. For aqueous systems containing Pb²⁺–Ni²⁺ and Pb²⁺–Cu²⁺, the selectivity coefficients of CTSD and CTBD were K/Ni²⁺ = 24.4 and K/Cu²⁺ = 41.4 and K/Ni²⁺ = 35.5 and K/Cu²⁺ = 55.3, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 29–34, 2002; DOI 10.1002/app.10180     

Facilitated transport of oxygen in ethyl cellulose membranes containing cobalt porphyrins as oxygen carriers

Facilitated transport of oxygen was investigated in ethyl cellulose membranes containing cobalt(II) meso‐tetrakis (substituted phenyl) porphyrins [CoTPP, CoT(2‐Cl)PP, CoT(4‐Cl)PP, CoT(4‐MeO)PP, and CoT(2,4‐2MeO)PP] as fixed oxygen carriers. The oxygen permeability (P) and oxygen/nitrogen selectivity (P/P) of the membranes containing oxygen carriers increase with a decrease in the upstream gas pressure, but the nitrogen permeability (P) is almost independent of the upstream nitrogen pressure. This indicates that the fixed oxygen carriers in the polymer membranes can reversibly interact with oxygen and facilitate oxygen transport in the membranes. The study on the influences of the substituents in the cobalt(II) porphyrins and the fifth ligand (imidazole or pyridine) on the membrane permeation behaviors shows that the porphyrin complex with an electron‐accepting substituent in the meso‐phenyl ring or with imidazole as the fifth ligand could increase the permeability and oxygen/nitrogen selectivity of the membranes much more than that with an electron‐donating substituent or with pyridine as the fifth ligand. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 484–488, 2000     

Hydrolysis reaction of poly(ethylene terephthalate) using ionic liquids as solvent and catalyst

The hydrolysis of poly(ethylene terephthalate) (PET) was studied using ionic liquid 1‐n‐butyl‐3‐methylimidazolium chloride ([Bmim][Cl]) as solvent and acid‐functionalized ionic liquid 1‐methyl‐3‐(3‐sulfopropyl)‐imidazolium hydrogen sulfate ([HSOpmim][HSO₄]) as catalyst. The effects of temperature, time, and dosages of solvent and catalyst on hydrolysis results were examined. Under the optimum conditions of m(PET) : m(H₂O) : m([Bmim][Cl]) : m([HSOpmim][HSO₄]) = 3 : 4 : 6 : 0.6, reaction temperature 170°C and time 4.5 h, the conversion of PET and the yield of terephthalic acid (TPA) were almost 100% and ≥88%, respectively. After easily separated from the product, the ionic liquids could be reused eight times without obvious decrease in the conversion of PET and yield of TPA. Hence, an environmental friendly strategy for chemical recycling of PET was developed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Determination of crystallinity ratio and some physicochemical properties of poly(4‐methyl‐1‐pentene)

It was determined that the thermal stability of poly(4‐methyl‐1‐pentene) (P4MP) was maintained up to 424°C in an inert atmosphere by thermogravimetric analysis. The retention diagrams of ethyl acetate, tert‐butyl acetate, and benzene on P4MP were plotted at temperatures between 30 and 280°C by inverse gas chromatography (IGC) technique. Melting temperature of the polymer was determined as 230 and 239.5°C by IGC and differential scanning calorimetry (DSC), respectively. The percent crystallinity of P4MP was obtained from the retention diagrams at temperatures below melting point. The percent crystallinity obtained by IGC is in good agreement with the ones obtained by DSC. Then, specific retention volume, V, weight fraction activity coefficient, Ω, Flory‐Huggins polymer‐solvent interaction parameter, χ, equation‐of‐state polymer‐solvent interaction parameter, χ, and effective exchange energy parameter, X_eff of octane, nonane, decane, undecane, dodecane, tridecane, n‐butyl acetate, isobutyl acetate, isoamyl acetate with P4MP, were determined between 240 and 280°C by IGC. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization, and adsorption properties of chitosan azacrown ethers bearing hydroxyl group

Two new chitosan azacrown ethers bearing hydroxyl groups (CTS‐DH and CTS‐DO) were synthesized by the reaction of 3‐hydroxyl‐1,5‐diaza‐cycloheptane and 3‐hydroxyl‐1,5‐diaza‐cyclooctane with epoxy‐activated chitosan. Their structures were characterized by elemental analysis, infrared spectra analysis, and X‐ray diffraction analysis. The adsorption and selectivity properties of the hydroxyl azacrown ethers chitosan derivatives for Ag⁺, Cr³⁺, Cd²⁺, and Pb²⁺ were also investigated. The experimental results showed that the two novel chitosan azacrown ethers have good adsorption capacity for Ag⁺, and also showed that the grafted chitosan azacrown ethers have high selectivity for the adsorption of Ag⁺ in the presence of Pb²⁺ and Cd²⁺. The selectivity coefficients of CTS‐DH and CTS‐DO were K = 21, K = 42, K = 20.5, K = 41, respectively. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1793–1798, 2001     

Sorption and transport properties of the semi‐interpenetrating network based on crosslinked poly(vinyl alcohol) and poly(styrene sulfonic acid‐co‐maleic anhydride) as proton‐conducting membranes

This study investigates the sorption and transport properties of hydrocarbon membranes based on poly(vinyl alcohol) network and poly(styrene sulfonic acid‐co‐maleic acid) (PSSA‐MA). The water and methanol self‐diffusion coefficients through an 80 wt % PSSA‐MA interpenetrating SIPN‐80 membrane measured 3.75 × 10^?6 and 5.47 × 10^?7 cm²/s, respectively. These results are lower than the corresponding values of Nafion® 115 (8.89 × 10^?6 cm²/s for water and 8.63 × 10^?6 cm²/s for methanol). The methanol permeability of SIPN‐80 membrane is 4.1 × 10^?7 cm²/s, or about one‐fourth that of Nafion® 115. The difference in self‐diffusion behaviors of Nafion® 115 and SIPN‐80 membranes is well correlated with their sorption characteristics. The solvent uptake of Nafion® 115 increased as the methanol concentration increased up to a methanol mole fraction of 0.63, and then decreased. However, the solvent uptake of the SIPN‐80 membranes decreased sluggishly as the methanol concentration increased. The λ values of water and methanol (i.e., λ and λ) in Nafion® 115 are quite close, indicating no sorption preference between water and methanol. In contrast, the λ value is only one‐third λ for a SIPN‐80 membrane. Accordingly, the SIPN membranes are regarded as candidates for direct methanol fuel cell applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of macrocyclic polyamine derivative of chitosan

A novel macrocyclic polyamine derivative of chitosan was synthesized by a reaction between chitosan and epoxy‐activated macrocyclic polyamine. The copolymer that is obtained contains amino functional groups in its skeleton and secondary amine and more polar hydroxyl groups. Four types of analyses were used to characterize the chemical modifications of the chitosan: elemental, FTIR spectra, solid‐state ¹³C‐NMR, and X‐ray diffraction. The adsorption properties of the macrocyclic polyamine grafted chitosan for Ag⁺, Cu²⁺, Co²⁺, and Cr³⁺ were also investigated. The experimental results showed that the new macrocyclic polyamine derivative of chitosan has high adsorption capacity and good selectivity for Ag⁺ in the presence of Ag⁺, Co²⁺, and Cr³⁺. The selectivity coefficients were K = 6.16, K = 14.81, and K = 2.42, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 924–929, 2003     

Preparation and characterization of dihydroxyl mesocyclic diamine derivative of chitosan

The synthesis of a new dihydroxyl mesocyclic diamine grafting chitosan is presented. This derivative is formed by reaction of dihydroxyl azacrown ether with expoxy‐activated chitosan. The obtained copolymer contains amino functional groups in its skeleton and the secondary amine, and more polar hydroxyl groups. Elemental analysis, fourier transform infrared analysis, as well as solid‐state carbon‐13 nuclear magnetic resonance analysis were used to characterize chemical modifications of the chitosan. The adsorption properties of the dihydroxyl mesocyclic diamine grafted chitosan for Ag⁺, Pb²⁺, Cd²⁺, and Cr³⁺ were studied. The experimented results showed that the novel chitosan derivative has good adsorption capacity and high selectivity for Ag⁺ in the presence of Pb²⁺, Cd²⁺, and Cr³⁺, and its adsorption selectivity is better than that of chitosan. The selectivity coefficients were K = 12.25, K = 6.12, and K = 0.52, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2677–2681, 2002     

Recognition by nonaromatic and stereochemical subunit-containing polyamides of the four Watson-Crick base pairs in the DNA minor groove

In order to develop an optimal subunit as a T‐recognition element in hairpin polyamides, 15 novel chirality‐modified polyamides containing (R)‐α,β‐diaminopropionic acid (^Rβ), (S)‐α,β‐diaminopropionic acid (^Sβ), (1R,3S)‐3‐aminocyclopentanecarboxylic acid (^RSCp), (1S,3R)‐3‐amino‐cyclopentanecarboxylic acid (^RSCp), (1R,3R)‐3‐aminocyclopentanecarboxylic acid (^RRCp) and (1S,3S)‐3‐amino‐cyclopentanecarboxylic acid (^SSCp) residues were synthesized. Their binding characteristics to DNA sequences 5′‐TGC N CAT‐3′/3′‐ACG N′ GTA‐5′ ( N?N′ =A ? T, T ? A, G ? C and C ? G) were systemically studied by surface plasmon resonance (SPR) and molecular simulation (MSim) techniques. SPR showed that polyamide 4 , AcIm‐^Sβ‐ImPy‐γ‐ImPy‐β‐Py‐βDp (β/^Sβ pair), bound to a DNA sequence containing a core binding site of 5′‐TGC A CAT‐3′ with a dissociation equilibrium constant (K_D) of 4.5×10^?8 m. This was a tenfold improvement in specificity over 5′‐TGCTCAT‐3′ (K_D=4.5×10^?7 M ). MSim studies supported the SPR results. More importantly, for the first time, we found that chiral 3‐aminocyclopentanecarboxylic acids in polyamides can be employed as base readers with only a small decrease in binding affinity to DNA. In particular, SPR showed that polyamide 9 (^RRCp/β pair) had a 15‐fold binding preference for 5′‐TGCTCAT‐3′ over 5′‐TGCACAT‐3′. A large difference in standard free energy change for A ? T over T ? A was determined (ΔΔG^o=5.9 kJ mol^?1), as was a twofold decrease in interaction energy by MSim. Moreover, a 1:1 stoichiometry ( 9 to 5′‐TGC T CAT‐3′/3′‐ACG A GTA‐5′) was shown by MSim to be optimal for the chiral five‐membered cycle to fit the minor groove. Collectively, the study suggests that the (S)‐α‐amino‐β‐aminopropionic acid and (1R,3R)‐3‐aminocyclopentanecarboxylic acid can serve as a T‐recognition element, and the stereochemistry and the nature of these subunits significantly influence binding properties in these recognition events. Subunit (1R,3R)‐3‐aminocyclopentanecarboxylic acid broadens our scope to design novel polyamides.     

Variable‐energy positron lifetime study of silicon‐oxide films plasma deposited from hexamethyldisiloxane and oxygen mixtures

Mixtures of hexamethyldisiloxane [HMDSiO, (CH₃)₃SiOSi(CH₃)₃] and oxygen are plasma polymerized at different oxygen pressures (P = 1.3–11.4 Pa) and a fixed monomer pressure (P_m = 2.6 Pa). The discharge power is kept at 100 W throughout the work. Nanometer‐size holes in the deposited films are characterized by variable‐energy positron annihilation lifetime spectroscopy (PALS). Additional information on the film composition and structure is obtained by X‐ray photoelectron spectroscopy and IR absorption spectroscopy. The ortho‐positronium lifetime τ₃ and intensity I₃ increase with the P up to 6.2 Pa and then decrease with the P. PALS measurements after annealing at 400°C show that films prepared at high oxygen pressure have a less stable structure than a film deposited at a lower oxygen pressure. These results are discussed in comparison with plasma deposition of pure HMDSiO, as are the possible effects of oxygen radicals on the film structure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 974–980, 2001     

A zeolite/polymer membrane for separation of ethanol-water azeotrope

A novel membrane effective in the separation of ethanol-water mixtures by pervaporation was made by combining zeolite NaA and poly(vinyl chloride) modified by 2-(2′-butoxyethoxy)ethyl thiolate. Under ambient conditions, a separation factor (α) of 29 and pervaporability (P) of 4 × 10^?4 g m^?1 h^?1 were obtained for the azeotropic mixture whereas, in the absence of zeolite, the respective values were 7 and 7 × 10^?5. A mechanism was proposed relating the preferential water transport at ≈? 50% zeolite content to an interfacial “phase” between the zeolite and the modified polymer.