A multiscale investigation on controlling bovine serum albumin adsorption onto polyurethane films

Our previous study on castor oil (CO) and poly(ethylene glycol) (PEG)‐based shape memory polyurethane (PU) films indicated that cell spreading on the polymer surface, cell morphology, and adhesion of fibroblast are closely related to the composition of the polymer that influences surface properties. This integrated experimental and computational study is designed to investigate the effect of important parameters such as surface roughness, crystallinity, hydrophilicity, distribution of hard/soft segments, and topology of the surface on protein adsorption for CO‐ and PEG‐based PUs. Analyses indicate that the crystallinity percentage highly promotes bovine serum albumin (BSA) adsorption. Roughness together with topological features determines BSA adsorption rate and concentration. Hydrophilicity and hard segment content seem to have less critical effect on adsorption. Distribution of hard segments into the soft segments emerges as another important factor for protein adsorption. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45669.     

Ozone‐induced grafting of a sulfoammonium zwitterionic polymer onto low‐density polyethylene film for improving hemocompatibility

Ozone‐induced grafting was developed to improve the hemocompatibility of biomaterials based on low‐density polyethylene (LDPE). An LDPE film was activated with ozone and graft‐polymerized with N,N′‐dimethyl(methacryloylethyl)ammonium propane sulfonate (DMAPS). The existence of sulfobetaine structures on the grafted film was confirmed by X‐ray photoelectron spectroscopy and attenuated total reflection/Fourier transform infrared (ATR–FTIR). More DMAPS was grafted onto the LDPE film as the DMAPS concentration increased, as determined by ATR–FTIR. Static contact‐angle measurements indicated that the DMAPS‐grafted LDPE film had a significant increase in hydrophilicity. The blood compatibility of the grafted film was preliminarily evaluated with a platelet‐rich‐plasma (PRP) adhesion study. No platelet adhesion was observed on the grafted film incubated with PRP at 37°C for 180 min. This new sulfoammonium zwitterionic‐structure‐grafted biomaterial might have potential for biomedical applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3697–3703, 2006     

Comparison of two approaches to grafting hydrophilic polymer chains onto polysulfone films

To reduce the surface protein adsorption of polysulfone (PSf) film, we improved the hydrophilicity of this film by photochemical grafting of methoxypoly (ethylene glycol) (MPEG) derivatives on its surface. Grafting was achieved with both the simultaneous method and the sequential method. Surface analysis of the grafted film by X‐ray photoelectron spectroscopy (XPS) revealed that the PEG chains had successfully grafted onto the surface of the film. The grafting efficiencies by simultaneous and sequential methods were 20.8% and 10.2%, respectively. With an atomic force microscope (AFM), the surface topography of PEG‐grafted films by these two methods was compared. Static water contact angle measurement indicated that the surface hydrophilicity of the film had been improved. Protein adsorption measurement showed that the surface protein adsorption of the modified film was significantly reduced compared with that of the unmodified PSf film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3818–3826, 2007     

Microwave-assisted functionalization of polyurethane surface for improving blood compatibility

In order to improve the hemocompatibility of polyurethane (PU), we report a rapid and efficient two-step approach to graft poly(ethylene glycol) (PEG) onto PU surface by a microwave-assisted method, involving diphenylmethane diisocyanate (MDI) – functionalization and subsequent PEG coupling. Compared with conventional heating, the effects of solvent, time and MDI concentrations on the microwave-assisted MDI-functionalization, and the effect of time on the microwave-assisted PEG coupling were studied. PEGs with different molecular weights were successfully grafted onto PU surface under the optimum microwave-assisted conditions within only 20 min, and characterized by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and chemical titration. The hydrophilicity and in vitro blood compatibility of the surfaces were evaluated by water contact angle measurements, blood coagulation time (whole blood clotting time and prothrombin time) and platelet adhesion tests, respectively. All the PU-PEG surfaces had improved surface wettability and hemocompatibility. The results suggested that microwave-assisted functionalization may be a promising method for rapidly and effectively decorating polyurethane surfaces.     

Blend films of O‐carboxymethyl chitosan and cellulose in N‐methylmorpholine‐N‐oxide monohydrate

To introduce N‐methylmorpholine‐N‐oxide (NMMO) process to prepare antibacterial lyocell fiber, the blend films of O‐carboxymethyl chitosan (O‐CMCS) and cellulose were prepared. O‐CMCS in aqueous suspension with particles having a surface mean diameter of 2.24 μm was blended with cellulose in NMMO hydrate. The blend films with different O‐CMCS content were prepared with the blend solutions. SEM confirmed that O‐CMCS remained within the cellulose film in the particle. The mechanical properties of the blend films show little increased value when O‐CMCS was less 5%; however, it decreased sharply when O‐CMCS was over 8%. Thus, the optimum O‐CMCS content may give a good combination of antibacterial action and mechanical properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4601–4605, 2006     

The polydopamine-assisted heparin anchor enhances the hydrophilicity,hemocompatibility, and biocompatibility of polyurethane

Surface heparinization is an effective solution to resolve low endothelialization, poor anticoagulation, and hemocompatibility of polyurethane (PU) used as materials of small-diameter vascular grafts. Here, the effects of polydopamine (PDA) and poly (acrylic acid) (PAA) as crosslinking agents on the surface heparinization were explored. The PU membranes grafted with heparin (Hep) via dopamine (PU/PDA-Hep) showed better hydrophilicity and stability, compared to heparinized PU membranes via acrylic acid (PU/PAA-Hep). The results of X-ray photoelectron spectroscopy demonstrated that heparin was successfully grafted onto the PU surface and the grafting efficiency was high when PDA as a cross-linking agent. The grafted heparin aggregated and formed nanoparticles, and increased the surface roughness of PU membranes. The heparinized membranes demonstrated good anti-adhesion of bovine serum albumin and fibrin protein. In addition, no activated platelets or educts on heparinized PU were found by platelet adhesion tests, implying that heparin-immobilized surfaces had good hemocompatibility. Moreover, the in vitro cytocompatibility assessment showed that the PU/PDA-Hep significantly improved the proliferation of L929 cells and was superior to PU/AA-Hep. These results demonstrated that PDA-assisted surface heparinization was an effective method to improve the anticoagulant and biocompatibility of PU small-diameter vascular materials and could be extended to other implantable materials.     

Grafting sulfobetaine monomer onto silicone surface to improve haemocompatibility

Silicone rubber has been used as a biomaterial for more than two decades and displays good mechanical and optical properties, but its chemical nature, poor antithrombogenicity, as well as its hydrophobicity, prevents its use in many demanding biomedical applications. In order to provide modified silicone with enhanced haemocompatibility, surface modification techniques were used. Ozonization was used to introduce active peroxide groups onto the silicone film surface and, subsequently, graft polymerization of N,N′‐dimethyl‐N‐methacryloyloxyethyl‐N‐(3‐sulfopropyl) ammonium (DMMSA), a zwitterionic sulfobetaine structure, onto the ozone activated silicone surface was conducted. Surface analysis was accomplished by means of attenuated total reflectance‐Fourier‐transform infrared (ATR‐FTIR), and X‐ray photoelectron spectra (XPS), and scanning electron microscopy (SEM) and contact angle measurement. ATR‐FTIR and XPS investigation confirmed the graft polymerization. The grafted film possessed a relatively hydrophilic surface as indicated by contact angle measurement. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet‐rich plasma (PRP) and protein adsorption in bovine fibrinogen using silicone film as the reference. No platelet adhesion was observed for the grafted films incubated in PRP for 120 min. The protein adsorption was reduced on the grafted films after incubated in bovine fibrinogen for 120 min. These results confirmed that the improved blood compatibility was obtained by grafting this new zwitterronic sulfobetaine structure onto silicone film. Copyright © 2003 Society of Chemical Industry     

Diffusion and sorption of benzene vapor through polybutadiene‐, polybutadiene/styrene‐, and polybutadiene/acrylonitrile‐based polyurethanes

A series of polyurethane (PU) films made from toluene diisocyanate (TDI), 1,4‐butanediol (BDO), and hydroxyl‐terminated polybutadiene (HTPB), hydroxyl terminated polybutadiene/styrene (HTBS), or hydroxyl terminated polybutadiene/acrylonitrile (HTBN) was synthesized by solution polymerization. The absorption of benzene vapor was found mainly in the soft phase. The equilibrium adsorption (M_∞) was reduced with increasing hard segment content for all the PUs. The values of M_∞ were in the sequence of HTBN‐PUs > HTBS‐PUs > HTPB‐PUs, which could be explained by the different interaction parameters between soft segments and benzene. The HTBN‐PU film showed the lowest degree of phase segregation and had more hard segments intermixed in the soft phase, restricting the movement of soft segments, and therefore resulted to non‐Fickian behavior, while the HTPB‐PU is antithetical. FTIR and atomic force microscopy were utilized to identify the hydrogen bonding behavior and morphology change of the PU films before and after the absorption of benzene vapor. The tensile strength of the HTBN‐PUs showed a greater decrease than that of HTBS‐PUs and HTPB‐PUs after absorbing benzene vapor. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2984–2991, 2004     

Preparation of aminated poly (L-lactic acid) film coated with multilayers of mussel-inspired heparin-like carboxymethylcellulose sodium and chitosan for anticoagulant materials

In this study, dopamine hydrochloride was grafted onto the sulfated carboxymethylcellulose sodium with different sulfated degree (DA-g-SCMC_S) as heparin-like polysaccharides. By studying the preliminary structure and coagulation time of DA-g-SCMC_S, the DA-g-SCMC2 possessing good anticoagulant properties were selected to be assembled layer by layer on the surface of aminated poly (L-lactic acid) (APLLA) film with chitosan (CS). The characterization properties including morphologies and wettability of DA-g-SCMC2/CS multilayers modified APLLA films were studied by scanning electron microscope and water contact angle instrument. Anticoagulation tests revealed that the (DA-g-SCMC2/CS)₁₅ multilayers modified APLLA film experienced a decrease of 37.5% and 73.68% in the adsorption of bovine serum albumin (BSA) and fibrinogen (FBG), respectively. And the platelet adhesion ability was reduced by 92.42% compared with the APLLA film. The degree of platelet activation (PF4 and TAT) and hemolysis rates of modified APLLA films also decreased significantly. Besides, the modified APLLA films promoted the growth of L929 cells and exhibited remarkable anti-inflammatory and antibacterial abilities. To summarize, the APLLA films modified with heparin-like multifunctional DA-g-SCMC2/CS multilayers exhibit outstanding biocompatibility, cytocompatibility, anti-inflammatory, and antibacterial characteristics, showcasing their potential as anticoagulation materials.     

Protein‐grafted carboxylic poly(ether sulfone) membranes: Preparation and characterization

Carboxylic poly(ether sulfone) membranes were prepared by a controlled acetylating and surface‐oxidating reaction followed by the grafting of bovine serum albumin (BSA) and bovine serum fibrinogen (BFG) onto the surfaces. Attenuated total reflection–Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and Micro BCA Protein Assay Kits confirmed that the proteins were successfully grafted onto the surfaces of the membranes. The protein grafting degrees were measured at different time intervals and under different conditions. The modified membranes showed higher hydrophilicity, lower protein (BSA and BFG) adsorption, and suppressed platelet adhesion values. Because of the binding of calcium ions in blood, the modified membranes showed longer plasma recalcification times, activated partial thromboplastin times, prothrombin times, and whole blood clotting times. The results indicate that the blood compatibility of the poly (ether sulfone) membranes could be improved after surface carboxylic modification and protein immobilization and that the modified membranes could be used in the blood purification field. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Zwitterionic sulfobetaine‐modified non‐woven fabric for blood filtration

Blood filtration requires a high removal ratio of leukocytes and with simultaneous high recovery ratio of platelets and other beneficial components. Problems are often encountered with blood filter materials in terms of high platelet loss. Zwitterions such as phosphorylcholine, sulfobetaine and carboxybetaine show effective resistance against protein adsorption and platelet adhesion. The study reported was aimed at achieving surface modification of poly(butylene terephthalate) non‐woven fabric (PBTNF) using UV radiation‐induced graft copolymerization of a zwitterionic sulfobetaine, N‐(3‐sulfopropyl)‐N‐methacroyloxyethyl‐N,N‐dimethylammonium betaine (SMDB), in order to improve the wettability and platelet recovery ratio of the PBTNF. Attenuated total reflection Fourier transform infrared and X‐ray photoelectron spectroscopy results showed that SMDB was successfully grafted onto the PBTNF. Photoinitiator concentration, monomer concentration and UV irradiation time affected markedly the degree of grafting. Critical wetting surface tension, water wetting time and hemolysis tests showed an improvement in wettability and blood compatibility as a result of graft copolymerization of SMDB. A blood filter material composed of SMDB‐modified PBTNF reduced platelet adhesion and had higher platelet recovery compared to poly(acrylic acid)‐modified PBTNF. It was found that SMDB monomer was successfully grafted onto PBTNF using UV radiation. The degree of grafting of SMDB could be controlled by varying the photoinitiator concentration, monomer concentration and UV irradiation time. SMDB‐modified PBTNF showed significant improvement in wettability and blood compatibility. The zwitterionic structure of SMDB is resistant to platelet adhesion. The SMDB‐modified PBTNF could be a candidate for a blood filter material and in other medical applications. Copyright © 2010 Society of Chemical Industry     

Graft copolymerization of polyethylene glycol methacrylate onto polyethylene film and its blood compatibility

In an attempt to produce surfaces that show low levels of adsorption of protein and adhesion of platelets, different molecular weights of polyethylene glycol methacrylate (PEG‐MA) were grafted onto polyethylene film by a preirradiation grafting process. The extent of grafting was found to be dependent on the storage condition of the irradiated polyethylene film, the preirradiated dose, reaction time and temperature, molecular weight of PEG‐MA, and the type of solvent. The grafting yield was found to decrease rapidly with storage time for irradiated polyethylene film stored at room temperature. On the other hand, the grafting yield in the irradiated polyethylene stored at −130°C remained nearly constant up to 20 days after irradiation. The grafting yield decreased with an increased PEG‐MA molecular weight. Human plasma protein was adsorbed onto control and PEG‐MA‐grafted polyethylene film surfaces, and the relative adsorbed amount of proteins on the surfaces was evaluated by electron spectroscopy for chemical analysis. The adsorbed protein and platelet adhesion on the polyethylene film surface decreased rapidly with the grafting yield. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 631–641, 1999     

Synthesis and physicochemical study of polyester polyols of epoxy resin of 2,4,6‐tris(4‐hydroxyphenyl)‐1,3,5‐triazine and their polyurethanes

Polyester polyols of ricinoleic acid (ETPRA), oleic acid, linoleic acid (ETPLA), and rosin (ETPR) and epoxy resin of 2,4,6‐tris(4‐hydroxyphenyl)‐1‐3‐5‐triazine (ETP) and their polyurethanes (PUs) were synthesized and characterized by Fourier transform infrared spectroscopy, NMR, differential scanning calorimetry, and thermogravimetric analysis techniques. The PU films showed the following density order: ETPRPU600 > ETPRAPU600 > ETPLAPU600. ETPLAPU600 showed good tensile strength and volume resistivity values compared to ETPRAPU600 and ETPRPU600. All three PUs showed good electric strength. ETPLAPU600 showed almost double the electric strength of ETPRAPU600 and ETPRPU600. The incorporation of soft‐segment poly(ethylene glycol) 600 into PU chains resulted in the flexibility of the films. The PU films showed a high water absorption tendency in water, acidic, and saline environments, and they degraded in an alkaline environment. The weight gain tendency of the films was due to surface solvolysis and was also probably due to microcrack formation. The polyester polyols and PUs were thermally stable up to about 167–221 and 184–214°C, respectively, and followed multistep degradation reactions with either fractional or integral order (0.43–2.71) degradation kinetics. Thus, the structure of the PUs affected the studied physicochemical properties of the films. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40203.     

One simple and stable coating of mixed‐charge copolymers on poly(vinyl chloride) films to improve antifouling efficiency

An antifouling surface is highly desirable for many biomedical applications. In this study, poly(vinyl chloride) (PVC) films were endowed with the improved properties of resisting nonspecific protein adsorption and platelet adhesion simply through being coated with a kind of mixed‐charge zwitterionic polymer, poly(3‐sulfopropyl methacrylate–methacrylatoethyl trimethyl ammonium chloride–glycidyl methacrylate) (PSTG), with random moieties of negatively charged 3‐sulfopropyl methacrylate potassium, positively charged [2‐(methacryloyloxy)‐ethyl] trimethylammonium chloride, and glycidyl methacrylate. The PSTG‐grafted PVC films were formed by the simple immersion of an amino‐functionalized PVC film into a PSTG solution. A grafting density of 220.84 µg/cm² of PSTG4‐grafted PVC film was successfully obtained. The PSTG4‐grafted PVC film showed a lower contact angle (37.5 °) than the ungrafted PVC film (98.3 °). The in vitro protein adsorption results show that the bovine serum albumin adsorption amount decreased 6.72 µg/cm² in the case of the PSTG4‐grafted PVC film, whereas that on the ungrafted PVC film was 28.54 µg/cm². So, PSTG‐grafted PVC films could be promising materials for medical devices. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44632.     

Composite films of N,O‐carboxymethyl chitosan and bamboo fiber

To obtain an antibacterial chitosan derivative, composite films of N,O‐Carboxymethyl Chitosan (N,O‐CMCS) and bamboo fiber were prepared. A water‐soluble chitosan derivative‐N,O‐CMCS was synthesized from chitosan with chloroacetic acid in alkaline solution. Composite films with 1–5 wt % N,O‐CMCS content were prepared in NaOH/urea/thiourea solution. The DS of N,O‐CMCS reached 1.70 and the water solubility increased with the increasing of DS. The carboxymethyl group was introduced into chitosan, which led to the decrease of thermal stability and crystallinity. The structural characterization confirmed that N,O‐CMCS was adsorbed on the surface of bamboo fiber. The antibacterial performance of the composite films were enhanced with the increasing of N,O‐CMCS content. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39851.     

Investigation of radiation‐grafted and radiation‐modified N‐vinyl‐2‐pyrrolidone onto polypropylene film

The radiation‐induced graft copolymerization of N‐vinyl‐2‐pyrrolidone (NVP) onto polypropylene films was investigated using the mutual method. The grafted polymer was modified with prepared α,β‐unsaturated nitrile (Scheme 1 ). The water uptake of the grafted and modified grafted films was found to increase with the degree of grafting. It was observed that the swelling behavior of the modified grafted films with α‐cyano‐β‐phenyl crotononitrile improved more than that of the film grafted and modified grafted with α‐cyano‐β‐(2‐thienyl)crotononitrile or α‐cyano‐β‐(2‐pyridyl)crotononitrile. The modification process for the grafted substrate was confirmed by IR spectroscopy. No significant improvement was observed in thermal stability for the modified grafted films compared to the grafted films. Scanning electron microscopy (SEM) of the grafted and modified grafted membranes heated to 150°C showed change in the structure and morphology. Improvement in the hydrophilicity and morphology of these membranes with carbonitriles may increase the permeability of those membranes for some practical applications.     

Preparation of multifunctional thiol‐ and acrylate‐terminated polyurethane: A comparative study on their properties in UV curable coatings

The multifunctional thiol‐ and acrylate‐terminated polyurethane (PU) has been successfully prepared for using as the main resin in the UV curable coatings. The structure and molecule weight of prepared PUs were analyzed by fourier transformed infrared spectroscopy (FTIR) and gel permeation chromatography, respectively. The results showed that the different terminal multifunctional groups have been grafted onto the PU and their difference in molecule weight was significant. Used as the main resin in coatings, the curing kinetic and percentage conversion of the different UV curing coatings system were investigated by real‐time FTIR method, and the effects of terminal functional groups and photoinitiator on the final conversion percentage and conversion rate were also compared. It is observed that the thiol‐terminated PU had higher conversion speed and final conversion percentage due to the remarkable effect of mercapto groups on reducing oxygen inhibition during UV curing process. The shrinkage, viscosity, and adhesion of UV curable coatings with thiol‐ and acrylate‐terminated PUs were also investigated and compared, and the results indicated that the former exhibited lower shrinkage and higher adhesion performances than the latter, along with the lower viscosity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40740.     

Surface modification of polyethylene by plasma pretreatment and UV‐induced graft polymerization for improvement of antithrombogenicity

The purpose of this study was to enhance blood compatibility of polyethylene (PE) films. Glycidyl methacrylate (GMA) was grafted onto the surface of PE by Ar plasma pretreatment and UV‐induced graft polymerization without photo‐initiator, then heparin was immobilized onto the poly (glycidyl methacrylate) segments. The surface compositions and microstructure of GMA graft polymerized PE films were studied by X‐ray photoelectron spectroscopy (XPS) and Attenuated Total Reflectance Fourier Transfer Infrared (ATR‐FTIR) spectroscopy. It was confirmed that heparin was successfully immobilized onto the surface of PE films by XPS analysis. The antithrombogenicity of the samples was determined by the activated partial thromboplastin time (APTT), prothrombin time (PT), thrombin time (TT), and plasma recalcification time (PRT) tests and platelet adhesion experiment. Results indicated that the antithrombogenicity of modified PE was improved remarkably. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2014–2018, 2004     

Controlled drug release through carboxymethyl‐chitosan/poly(vinyl alcohol) blend films

Carboxymethyl‐chitosan (CMCS)/poly(vinyl alcohol) (PVA) blend film was studied for an application as a coating material in the site‐specific drug delivery system. Films were prepared by blending varying amounts of 4 wt% CMCS with 4 wt% PVA, casting and drying at 50°C for 24 h. The cross‐sectional SEM micrograph of the film revealed that an increase in the amount of CMCS in the blend resulted in the film surface less smooth in the dry state and the network less uniform and more porous in the hydrated state, which became appreciable at 50%. The inclusion of CMCS in the blend also made the swelling of the films pH‐dependent, and lead to an increase in the degree of swelling with pH increase. When the permeation of three model drugs, salicylic acid, theophyline, and ornidazole, was studied using a static diffusion vessel, it followed a zero‐order kinetics and increased with an increase in the CMCS content in the blend, a decrease in the molecular weight of drug, an increase in the pH of medium, and a decrease in the film thickness. POLYM. ENG. SCI., 47:1373–1379, 2007. © 2007 Society of Plastics Engineers     

Synthesis and characterization of polyurethane–chitosan interpenetrating polymer networks

A polyurethane–chitosan (PU–CH) coating was synthesized from castor-oil-based PU prepolymer and highly deacetylated and depolymerized chitosan. The films cast with the coating were used for the characterization. X-ray photoelectron spectroscopy, a surface-sensitive technique, indicated the chemical bonding between the chitosan and PU prepolymer as well as the enrichment of chitosan on the surface of the film PU–CH. Electron spin resonance (ESR) spectroscopy using the nitroxyl radical 4-hydroxy-2,2,6,6-tetramethyl piperidine-1-oxyl (4-hydroxy-TEMPO) as a reporter group was used to study the chain mobility in the film PU–CH. It was observed that T_50G of the probe and the first glass transition temperature (T_g1) of the film PU–CH were 10 and 18°C higher than those in the PU film, respectively, and the activation energy (27.0 kJ mol⁻¹) of tumbling for the probe covalently bonded with PU–CH was 12.8 kJ mol⁻¹ higher than that of the probe with the film PU. It suggests that the molecular motion in the PU–CH was restricted by grafted and crosslinked interpenetrating polymer networks (IPNs). The results of the differential thermal analysis and thermogravimetric analysis proved that the thermostability of the film PU–CH was significantly higher than that of the film PU, and the T_g1 value is in good agreement with that calculated from ESR. It could be concluded that the IPNs resulted from the chitosan grafting and crosslinking with PU exist in the film PU–CH. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1321–1329, 1998