β‐cyclodextrin‐conjugated hyaluronan hydrogel as a potential drug sustained delivery carrier for wound healing

In order to develop a potential drug sustained delivery carrier suitable for wound healing, a series of β‐cyclodextrin conjugated hyaluronan hydrogels (β‐CD‐HA) with adjustable crosslink densities were synthesized and characterized, meanwhile the delivery kinetics and mechanism of diclofenac as a model anti‐inflammatory drug from these hydrogels were investigated. By controlling the feeding molar ratio of β‐CD/HA, a β‐CD substitution degree of 4.65% was obtained by ¹H‐NMR analysis. The incorporation of β‐CD modification had little effect on the internal porous structure, water swelling ratio, and rheological property of HA hydrogel, which however were influenced by the crosslink density. Although the crosslink density had an influence on the drug loading and release profile by altering the water swelling property, the interaction between β‐CD and drug was the primary factor for the high loading capacity and long‐term sustained delivery of diclofenac. The semiempirical equation fit showed that the release of diclofenac from HA‐based hydrogels followed a pseudo‐Fickian diffusion mechanism. By the aid of β‐CD and controlled crosslink density, a β‐CD‐HA hydrogel with a diclofenac sustained delivery period of over 28 days and desirable physicochemical properties was achieved, which will be a promising drug sustained delivery carrier for wound healing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43072.     

Synthesis and characterization of grafting β‐cyclodextrin with chitosan

Two new adsorbents [β‐cyclodextrin–chitosan (β‐CD–CTS) and β‐cyclodextrin‐6–chitosan (β‐CD‐6‐CTS)] were synthesized by the reaction of β‐cyclodextrin (β‐CD) with epoxy‐activated chitosan (CTS) and the sulfonation of the C‐6 hydroxyl group of β‐cyclodextrin with CTS, respectively. Their structures were confirmed by IR spectral analysis and X‐ray diffraction analysis, and their apparent amount of grafting was determined by ultraviolet spectroscopy. The adsorption properties of β‐CD‐CTS and β‐CD‐6‐CTS for p‐dihydroxybenzene were studied. The experimental results showed that the two new adsorbents exerted adsorption on the carefully chosen target. The highest saturated capacity of p‐dihydroxybenzene of β‐CD‐CTS and β‐CD‐6‐CTS were 51.68 and 46.41 mg/g, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 860–864, 2004     

Pyromellitic dianhydride‐modified β‐cyclodextrin microspheres for Pb(II) and Cd(II) adsorption

In this work, the pyromellitic dianhydride (PMDA)‐grafted β‐cyclodextrin (β‐CD) microspheres have been prepared for the removal of lead and cadmium metal ions in aqueous solution by a batch‐equilibration technique. The effects of the pH of the solution, contact time, and initial metal concentration were studied. The adsorption capacities for the two metal ions increase significantly as a large number of carboxyl groups are present on the microspheres surface. The equilibrium process is better described by the Langmuir isotherm than the Freundlich isotherm. The maximum adsorption capacities are 135.69 and 92.85 mg g^?1 for Pb(II) and Cd(II), respectively. Kinetic studies show good correlation coefficients for a pseudosecond‐order kinetic model, confirming that the sorption rate is controlled by chemical adsorption. The regeneration of the adsorbent can be carried out by treating the loaded microspheres with 0.2 (mol L^?1) HCl obtaining high desorption rate for the two metal ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Chitosan and chitosan/β‐cyclodextrin microspheres as sustained‐release drug carriers

The main aim of this study was to compare two microspheres, chitosan (CTS) and CTS/β‐cyclodextrin (β‐CD), made by spray‐drying, as pulmonary sustained drug‐delivery carriers. Theophylline (TH) was used as a model drug. The characteristics of the microspheres and in vitro release were studied. The yield of CTS/β‐CD microspheres was 46.1%, which was higher than that of the CTS microspheres (36.5%). The drug loads of the CTS and CTS/β‐CD microspheres were 22.7 and 21.1%, respectively, whereas the encapsulation efficiencies were 90.7 and 91.4%, respectively. The distribution of 50% [(diameter) d (0.5)] of the CTS microspheres was below 6.49 μm and that of the CTS/β‐CD microspheres was below 4.90 μm. Scanning electron microscopy showed that both microspheres yielded a spherical shape with smooth or wrinkled surfaces. Fourier transform infrared spectroscopy demonstrated that the carbonyl group of TH formed hydrogen bonds with the amide group of CTS and the hydroxyl group of β‐CD. The swelling ability of the two microspheres was more than three times their weight, and their humidity rates attained equilibrium within 24 h. The ciliary beat movement times of CTS and CTS/β‐CD microspheres were 493.00 and 512.33 min, respectively, which indicated that the two microspheres effectively reduced the ciliotoxicity and possessed better adaptability. In vitro release of TH from CTS/β‐CD microspheres was slower than that from CTS microspheres at pH 6.8 and provided a sustained release of 72.0% within 12 h. The results suggest that CTS/β‐CD microspheres are a promising carrier for sustained release for pulmonary delivery. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1183–1190, 2007     

Preparation and characterisation of a novel copper‐imprinted polymer based on β‐cyclodextrin copolymers for selective determination of Cu2+ ions

A novel ion‐imprinted polymer (IIP) using (6‐O‐butene diacid ester)‐β‐cyclodextrin (β‐CD‐MAH) as the functional monomer and copper ions as the template was developed for Cu²⁺ sensing. First, reactive β‐cyclodextrin (β‐CD) monomers with vinyl carboxylic acid functional groups were synthesised and were co‐polymerised with styrene via radical polymerisation. Then, the β‐CD copolymers were complexed with Cu²⁺ in order to obtain the IIP. The imprinting effect was realised by removing the template ions from the imprinted polymer. The structure, composition and morphology of the IIP were characterised by Fourier transform IR spectroscopy, energy‐dispersive spectroscopy and field‐emission SEM. The adsorption capacity was investigated by UV–visible spectroscopy in batch operation mode. The maximum adsorption capacity for the Cu²⁺ template ions was 28.91 mg g^?1, and the adsorption selectivity was clearly illustrated from the increased sorption affinity towards Cu²⁺ ions over other competing ions. The adsorption was affected by the pH of the aqueous medium, and enhanced adsorption capacity was observed at pH 5. The prepared IIP could be used 10 times after its regeneration without significant loss of the adsorption capacity. © 2018 Society of Chemical Industry     

Fabrication of polymer/drug‐loaded hydroxyapatite particle composite fibers for drug sustained release

The aim of this study is to fabricate polymer/hydroxyapatite (HA) particle composite fibers for drug encapsulation and sustained release. Firstly, drug‐loaded hydroxyapatite particles are synthesized in one step, then by electrospinning of the blends of drug‐loaded hydroxyapatite particles and polymer solution the drug‐loaded polymer/hydroxyapatite particle composite fibers are successfully prepared. Effect of loading ratio of drug‐loaded hydroxyapatite particles in the fibers and pH value of the release medium on the drug release kinetics are both investigated, and the results demonstrate that, as compared with the polymer/drug electrospun fibers, the drug in the polymer/drug‐loaded hydroxyapatite particle composite fibers shows a sustained release manner, and the drug release rate can be regulated by both the loading ratio of drug‐loaded hydroxyapatite particles in the composite fibers and pH value of the buffer solution. The results indicate that the developed drug‐loaded polymer/hydroxyapatite particle composite fibers show great potential in bone regeneration and other related biomedical fields. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42871.     

Development and Characterization of Biphasic Hydroxyapatite/β‐TCP Cements

Biphasic calcium phosphate bioceramics composed of hydroxyapatite (HA) and β‐tricalcium phosphate (β‐TCP) have relevant properties as synthetic bone grafts, such as tunable resorption, bioactivity, and intrinsic osteoinduction. However, they have some limitations associated to their condition of high‐temperature ceramics. In this work self‐setting Biphasic Calcium Phosphate Cements (BCPCs) with different HA/β‐TCP ratios were obtained from self‐setting α‐TCP/β‐TCP pastes. The strategy used allowed synthesizing BCPCs with modulated composition, compressive strength, and specific surface area. Due to its higher solubility, α‐TCP was fully hydrolyzed to a calcium‐deficient HA (CDHA), whereas β‐TCP remained unreacted and completely embedded in the CDHA matrix. Increasing amounts of the non‐reacting β‐TCP phase resulted in a linear decrease of the compressive strength, in association to the decreasing amount of precipitated HA crystals, which are responsible for the mechanical consolidation of apatitic cements. Ca²⁺ release and degradation in acidic medium was similar in all the BCPCs within the timeframe studied, although differences might be expected in longer term studies once β‐TCP, the more soluble phase was exposed to the surrounding media.     

Fabrication of citric acid crosslinked β‐cyclodextrin/hydroxyethylcellulose hydrogel films for controlled delivery of poorly soluble drugs

β‐cyclodextrin grafted hydroxyethylcellulose (βCD‐g‐HEC) hydrogel films were prepared for the controlled release of poorly soluble model drug (ketoconazole) using citric acid as crosslinking agent. The active βCD and carboxyl content of the hydrogel films were determined by phenolphthalein assay and acid–base titration. The films were characterized by solid state ¹³C NMR, ATR–FTIR, thermogravimetric analysis, and differential scanning calorimetric, and analyzed for tensile strength, swelling ratio, drug loading, release, hemocompatibility, in vitro cytotoxicity, and implantation test. An increase in the concentration of βCD in feed increased the active βCD content of the hydrogel films but reduced their extent of interpolymer crosslinking. The βCD‐g‐HEC hydrogel films with high active βCD content showed maximum drug loading whereas those with high crosslinking density were capable of controlling the drug release for long duration. Hemolysis assay and in vitro cytotoxicity study revealed the biocompatible nature of the hydrogel films whereas implantation test indicated their minimal inflammatory effect. From the overall results, βCD‐g‐HEC hydrogel films were found to be better alternative to the previously reported βCD‐HPMC and βCD‐CMC hydrogel films for enhanced loading and long‐term release, respectively, of the poorly soluble drugs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46452.     

β‐cyclodextrin/poly(vinyl alcohol) hydrogels containing phenylpropionic acid and naphthylamine: dual pH‐sensitive release

Hydrogel composed of β‐cyclodextrin (β‐CD) and poly(vinyl alcohol) was prepared in a strong alkaline condition using epichlorohydrin as a crosslinker. Phenylpropionic acid (PPA) and naphthylamine (NA) were loaded in the cavities of β‐CD residues to endow the hydrogel with a dual pH‐sensitive characteristic. In release experiments using fluorescein isothiocyanate‐dextran (FITC‐dextran) as a dye, PPA/NA‐loaded hydrogel exhibited an extensive release not only in acidic conditions (e.g. pH 3.0) but also in alkaline conditions (e.g. pH 9.0). PPA and NA will be highly ionized at the alkaline and the acidic pH and they could promote swelling of the hydrogel, causing an extensive release at those pH values. However, the release was suppressed at mid pH values (e.g. pH 5.0 and pH 7.4), possibly due to the formation of salt bridges between PPA^? and NA⁺. In fact, the degree of swelling at mid pH was lower than that observed at strong acidic pH and alkaline pH. According to SEM images, the pore size and the texture compactness of hydrogels which had been subjected to swelling at different pH values could also account for the dual pH‐sensitive releases. The hydrogels exhibited dual pH sensitivities in terms of FITC‐dextran release and swelling. These hydrogels might be used as a pH‐sensitive vehicle for water‐soluble drugs. © 2013 Society of Chemical Industry     

Altering associations of doxorubicin‐loaded alginate esters micelles in presence of β‐cyclodextrin

The aim of this article was to evaluate the effects of β‐cyclodextrin (β‐CD) on doxorubicin (DOX)‐loaded alginate esters (SA‐C₁₆) micelles (DOX/SA‐C₁₆) in aqueous solution. DOX was physically loaded into SA‐C₁₆ micelles by an o/w emulsion method with a substantial encapsulation efficiency (EE) level (36.12%), and DOX/SA‐C₁₆ was distributed in size diameters of approximately 254 nm. SA‐C₁₆ as carriers for the DOX can lead to the formation of associative networks in aqueous solutions between the hydrophobic tails of SA‐C₁₆ and DOX, and the dried morphology of DOX/SA‐C₁₆ aggregate was spherical shape. Addition of β‐CD to the system of DOX/SA‐C₁₆ facilitated decoupling of these associations via inclusion complex formation between β‐CD cavities and the polymer hydrophobic tails that produced the release of DOX immediately, and the EE level was dropped to 0.08%, and at the same time the size distribution of aggregate was increased to about 413 nm, moreover, the aggregate was relatively large and becoming irregular spherical shape. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40702.     

Preparation and characterization of a temperature‐sensitive nonwoven poly(propylene) with increased affinity for guest molecules

A temperature‐sensitive hydrogel with the capability of inclusion complex formation with guest molecules was successfully grafted onto the surface of nonwoven polypropylene (nonwoven PP). This was carried out by the use of N‐isopropylacrylamide monomer and a modified cyclodextrin (acrylamidomethyl‐β‐cyclodextrin (β‐CD‐NMA)). Fourier‐transform infra red (FT‐IR) and elemental analyses confirmed the presence of poly(N‐isopropylacrylamide) (PNIPAAm) and β‐CD‐NMA components on the surface of the textile. Equilibrium swelling ratio measurements showed that the grafted hydrogel maintained its temperature‐sensitive property compared to a nongrafted hydrogel. The effect of β‐CD‐NMA and crosslink agent concentrations on the grafting yield was studied. The β‐CD‐NMA content into the PNIPPAM‐ β‐CD‐NMA grafted nonwoven PP (PNIPAAm‐β‐CD‐NMA‐PP) was estimated by FT‐IR through a new procedure. The estimated amounts of β‐CD‐NMA in PNIPAAm‐β‐CD‐NMA‐PP were determined to be 0.9, 1.9 mg g^?1 for 0.019M and 0.049M concentrations of β‐CD‐NMA in monomer solution, respectively. The PNIPAAm‐β‐CD‐NMA‐PP showed a remarkable increase in absorbance affinity of 8‐anilino‐1‐naphthalenesulfonic acid ammonium salt at 20°C from 0.93 to 3.33 µmol g^?1 compared to PNIPAAm‐PP. Furthermore, the results showed a temperature‐sensitive loading affinity for PNIPAAm‐β‐CD‐NMA‐PP in absorbance of guest molecules due to the presence of β‐CD‐NMA. The use of hydrophobic guest molecules such as fragrance oils and antibiotics in modified fabrics can provide new applications in textile and pharmaceutical industry. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40497.     

Investigation on β‐polypropylene/PP‐g‐MAH/ surface‐treated calcium carbonate composites

β‐Polypropylene composites containing calcium carbonate treated by titanate coupling agent (T‐CaCO₃) and maleic anhydride grafted PP (PP‐g‐MAH) were prepared by melt compounding. The crystallization, morphology and mechanical properties of the composites were investigated by means of differential scanning calorimetry, wide‐angle X‐ray diffraction, polarized light microscopy, scanning electron microscopy and mechanical tests. It is found that both T‐CaCO₃ and NT‐C are able to induce the formation of β‐phase, and NT‐C greatly increases the β content and decreases the spherulitic size of PP. PP‐g‐MAH facilitates the formation of β‐form PP and improves the compatibility between T‐CaCO₃ and PP. Izod notched impact strength of β‐PP/T‐CaCO₃ composite is higher than that of PP/T‐CaCO₃ composite, indicating the synergistic toughening effect of T‐CaCO₃ and β‐PP. Incorporation of PP‐g‐MAH into β‐PP/T‐CaCO₃ composite further increases the content of β‐crystal PP and improves the impact strength and tensile strength when T‐CaCO₃ concentration is below 5 wt%. The nonisothermal crystallization kinetics of β‐PP composites is well described by Jeziorny's and Mo's methods. It is found that NT‐C and T‐CaCO₃ accelerate the crystallization rate of PP but the influence of PP‐g‐MAH on crystallization rate of β‐PP composite is marginal. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Functionalized bacterial cellulose nanowhiskers as long‐lasting drug nanocarrier for antibiotics and anticancer drugs

A nano drug carrier based on sustainable and biocompatible nanocellulose was developed for use in prolonged drug releases. The grafting of β‐cyclodextrin (βCD) on bacterial cellulose nanowhiskers (BCNC) using citric acid (CA) as a green linker was performed. This led to the formation of functionalized BCNC‐grafted‐βCD (BCNC‐g‐βCD). Broad‐spectrum antibiotic Ciprofloxacin (CIP) and anticancer drugs Doxorubicin (DOX) and Paclitaxel (PTX) were used as model drugs. These model drugs were conjugated to BCNC‐g‐βCD to form the drug‐nanocarrier systems (BCNC‐g‐βCD‐drug). The change in the nanowhiskers’ surface chemistry, morphology, and crystallinity was characterized by FTIR, solid‐state ¹³C NMR, scanning electron microscopy (SEM), atomic force microscopy (AFM), and x‐ray diffraction (XRD). The functionalized nanowhiskers showed a significant increase in the drug payloads, which ranged from 495 ±4–810 ±7 μg/mg, along with a radical improvement in the drug release profiles. For all of the developed drug‐conjugated nanocarriers, the initial burst releases were reduced effectively. The observed drug releases showed a sustained and controlled manner, with cumulative releases of 75–90 % over 5–5.5 days. Nevertheless, an improved drug release performance was observed in the acidic pH of 6.4 that mimicked extracellular tumor cells. In vitro drug release data were fitted zero‐order kinetic model with drug release constants (K₀) of 0.68, 0.74, and 0.79 μg drug/h (at pH 6.4 and 37 °C) for BCNC‐g‐βCD‐CIP, BCNC‐g‐βCD‐DOX, and BCNC‐g‐βCD‐PTX nanosystems, respectively. The observed higher payloads along with the slow releases of drugs from the developed nanocarrier suggests its promising potential for reducing the frequent daily dosing and minimizing systemic toxicity of loaded drugs.     

Preparation of bimodal porous copolymer containing β‐cyclodextrin and its inclusion adsorption behavior

A novel insoluble bimodal porous polymer containing β‐cyclodextrin (β‐CD) was prepared to adsorb aromatic amine compound. The process involved copolymerization of styrene and methyl methacrylate with a maleic acid derivative of β‐CD, subsequently, above formed copolymer was foamed by supercritical CO₂. The chemical properties and physical structure of obtained copolymer was analyzed using Fourier transform infrared spectra, Thermal gravimetric analysis, X‐ray diffraction, scanning electron microscope, and N₂ adsorption techniques. The inclusion adsorption of aromatic amine compounds on β‐CD copolymer was carried out in a batch system. The quantities of aromatic amine compounds adsorbed on β‐CD copolymer reached equilibrium within 60 min. The adsorption kinetic could be fitted to a pseudo‐second‐order kinetic equation, and the linear correlation coefficients varied from 0.9828 to 0.9935. With the influence of molecular structure and hydrophobicity of the aromatic amine compound, the sequence of quantity of aromatic amine compounds adsorbed on β‐CD copolymer is p‐toluidine > aniline > benzidine > o‐toluidine. The adsorption equilibrium data of aromatic amine compound adsorbed on β‐CD copolymer were fitted to Freundlich and Langmuir models, respectively. The linear correlation coefficients of Langmuir model varied from 0.9516 to 0.9940, and the linear correlation coefficients of Freundlich varied from 0.9752 to 0.9976. It is concluded that Freundlich model fits better than Langmuir model, because the adsorption of aromatic amine compound on β‐CD copolymer is a chemical process. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Isothermal crystallization and melting behavior of polypropylene with lanthanum complex of cyclodextrin derivative as a β‐nucleating agent

A novel highly active β‐nucleating agent, β‐cyclodextrin complex with lanthanum (β‐CD‐MAH‐La), was introduced to isotactic polypropylene (iPP). Its influence on isothermal crystallization and melting behavior of iPP was investigated by differential scanning calorimeter (DSC), wide‐angle X‐ray diffraction (WAXD), and polarized light microscopy (PLM). WAXD results demonstrated that β‐CD‐MAH‐La was an effective β‐nucleating agent, with β‐crystal content of iPP being strongly influenced by the content of β‐CD‐MAH‐La and the isothermal crystallization temperature. The isothermal crystallization kinetics of pure iPP and iPP/β‐CD‐MAH‐La was described appropriately by Avrami equation, and results revealed that β‐CD‐MAH‐La promoted heterogeneous nucleation and accelerated the crystallization of iPP. In addition, the equilibrium melting temperature (T) of samples was determined using linear and nonlinear Hoffman‐Weeks procedure. Finally, the Lauritzen‐Hoffman secondary nucleation theory was applied to calculate the nucleation parameter (K_g) and the fold surface energy (σ_e), the value of which verify that the addition of β‐CD‐MAH‐La reduced the creation of new surface for β‐crystal and then led to faster crystallization rate. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of guar gum bonded with β‐cyclodextrin microspheres and the absorption on basic fuchsine

β‐Cyclodextrin microspheres (β‐CDMs) were prepared and then bonded to guar gum (GG). The structures of the precursor material and product were characterized by X‐ray diffraction and Fourier transform infrared spectroscopy. Phenolphthalein and spectrophotometry were used to determine the content of β‐cyclodextrin (β‐CD) in products. By changing environmental conditions and types of adsorbents, the adsorption capacities of polymers on basic fuchsine were studied. The results indicate that the absorption capacity was decreased accordingly when the pH value was reduced. The increase of temperature had no obvious influence on improving the absorption capacity from 40 to 60°C. When the mass ratio of chloropropyl hydroxyl GG to β‐CDMs to sodium carbonate was 0.6 : 0.8 : 1.0, with the reaction time of 2 h, the best adsorption capacity of 24 mg/g was achieved; this was in accordance with the results of the measurement of the content of β‐CD in the products. The higher content of β‐CDM was beneficial for improving the absorption capacity. By comparing its properties with the absorption capacity of traditional flocculating agents polyacrylamide and polaluminum chloride, the best absorption results for GG bonded with β‐CDMs were obtained. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of a vinyl monomer containing β‐cyclodextrin and grafting onto cotton fiber

To chemically bond β‐cyclodextrin (β‐CD), which can form inclusion complexes, acrylamidomethyl CD (CD–NMA) obtained from the acid‐catalyzed reaction of N‐methylolacrylamide (NMA) and β‐CD was grafted onto cellulose fibers using CeIV as the initiator. The double‐bond content of CD–NMA increased with increase in the NMA/CD mol ratio, and a CD–NMA containing a maximum of three molecules of NMA bonded to a CD molecule could be obtained. Since the grafting condition is acidic, the hydrolytic stability of CD–NMA in aqueous nitric acid was studied. The temperature of hydrolysis proved to have a greater effect on the depletion of double bonds from CD–NMA compared with the concentration of the acid. Thus, CD–NMA was grafted onto cellulose fibers at a low temperature, and FTIR analysis of the CD–NMA‐grafted cotton fibers confirmed the chemical bonding of CD–NMA molecules to cellulose. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 438–446, 2001     

Complexation of Surfactant/β‐Cyclodextrin to Inhibit Surfactant Adsorption onto Sand,Kaolin, and Shale for Applications in Enhanced Oil Recovery Processes. Part I: Static Adsorption Analysis

Surfactant adsorption onto solid surfaces is a major issue during surfactant flooding in enhanced oil recovery applications; it decreases the effectiveness of the chemical injection making the process uneconomical. Therefore, it was hypothesized that the adsorption of surfactant onto solid surfaces could be inhibited using a surfactant delivery system based on the complexation between the hydrophobic tail of anionic surfactants and β‐cyclodextrin (β‐CD). Proton nuclear magnetic resonance spectroscopy was used to confirm the complexation of sodium dodecyl sulfate (SDS)/β‐CD. Surface tension analysis was used to establish the stoichiometry of the complexation and the binding constant (K_a). Static adsorption testing was applied to determine the adsorption of surfactant onto different solids (sandstone, shale, and kaolinite). The release of the surfactant from the β‐CD cavity was qualitatively evaluated through bottle testing. The formation of the inclusion complex SDS/β‐CD with a 1:1 stoichiometry was confirmed. The K_a of the complexations increases as salinity and hardness concentration increases. The encapsulation of the surfactant into the β‐CD cavity decreases the adsorption of surfactant onto solid surfaces up to 79 %. Qualitative observations indicate that in the presence of solid adsorbents partially saturated with crude oil, the β‐CD cavity releases surfactant molecules, which migrate towards the oil–water interface.     

Adsorption of guanosine,cytidine, and uridine on a β‐cyclodextrin derivative grafted chitosan

A β‐cyclodextrin derivative grafted chitosan (CDD‐C) was synthesized with chitosan and carboxymethyl‐β‐cyclodextrin (β‐CD). Its structure was characterized by elemental, infrared spectra, and X‐ray diffraction analyses. The degree of substitution by the carboxymethyl‐β‐CD moiety achieved 0.27 with the addition of DMF to the reaction solution. The results are in agreement with the expectations. The static adsorption properties for guanosine, cytidine, and uridine were studied. Experimental results demonstrated that CDD‐C had higher adsorption capability for guanosine than cytidine and uridine, and the adsorption capacity for guanosine was 74.20 mg/g. The adsorption capacity was greatly influenced by pH, time, and temperature. The introduction of chitosan enhanced the adsorption ability and adsorption selectivity of β‐CD for guanosine. This novel derivative of chitosan is expected to have wide applications in separation, concentration, and analysis of guanosine, cytidine, and uridine in biological sample. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3050–3055, 2007     

2‐Naphthol‐containing β‐cyclodextrin–epichlorohydrin copolymers: synthesis,characterization and fluorescence studies

Fluorescent 2‐naphthol (NOH)‐containing β‐cyclodextrin (β‐CD)–epichlorohydrin (EP) copolymers were synthesized. Polymerization was confirmed through viscosity and FT‐IR spectroscopic measurements. Under certain conditions, the copolymers were water‐soluble (molar ratio of EP/β‐CD <22:1), while under other conditions water‐insoluble gels were formed (EP/β‐CD ≥ 22:1). Increase of the EP content to EP/β‐CD ≤ 39:1 increased the fluorescence intensity of the copolymer and shifted the emission maximum from 422 nm toward 352 nm (measured at pH ≥ 12). Further increases in the EP content resulted in a slight decrease in the fluorescence intensity. The fluorescence properties of our system at EP/β‐CD < 22 were sensitive to pH variation, while at EP/β‐CD ≥ 22 no pH effect was observed. These variations can be explained in terms of the exposure of the fluorophore to solvent in soluble versus insoluble polymers, as well as changes in the mode of association (host–guest complexation, trapping within the polymer network, covalent bonding, etc) of NOH with the polymers. Crystallographic studies on a single crystal grown in the absence of EP, but under basic conditions, suggest that host–guest complexation is not an important mode for NOH incorporation. Copyright © 2005 Society of Chemical Industry