Study of uranium adsorption using amidoximated polyacrylonitrile‐encapsulated macroporous beads

Polyacrylonitrile beads, containing the amidoximated polyacrylonitrile, were prepared for adsorption of uranium. The synthesized amidoximated polyacrylonitrile chelating beads were evaluated, for their ability to adsorb uranium from aqueous solution, at different temperatures and pH values. The kinetic measurement showed that about 120 min of equilibration time was enough, to remove saturation amount of uranium from the solution. The pseudo first‐order and pseudo second‐order equations were used to analyze the kinetic data, and the rate constants were determined. The equilibrium adsorption data were examined by the Langmuir, Freundlich, and Temkin isotherms. The data showed a better fit to the Langmuir isotherm. The loaded uranium could also be leached out from the beads, by treating with dilute acids. The uranium uptake capacity of the polymeric beads was found to be 3.5 mg/g of the swollen beads. Reusability of the beads was also established by multiple adsorption–desorption experiments. The pore volume and the surface area of the dried beads, measured by BET method, were found to be 1.93 cc/g and 320 m²/g, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of porous chitosan–tripolyphosphate beads for copper(II) ion adsorption

Porous chitosan–tripolyphosphate beads, prepared by the ionotropic crosslinking and freeze‐drying, were used for the adsorption of Cu(II) ion from aqueous solution. Batch studies, investigating bead adsorption capacity and adsorption isotherm for the Cu(II) ion, indicated that the Cu(II) ion adsorption equilibrium correlated well with Langmuir isotherm model. The maximum capacity for the adsorption of Cu(II) ion onto porous chitosan–tripolyphosphate beads, deduced from the use of the Langmuir isotherm equation, was 208.3 mg/g. The kinetics data were analyzed by pseudo‐first, pseudo‐second order kinetic, and intraparticle diffusion models. The experimental data fitted the pseudo‐second order kinetic model well, indicating that chemical sorption is the rate‐limiting step. The negative Gibbs free energy of adsorption indicated a spontaneous adsorption, while the positive enthalpy change indicated an endothermic adsorption process. This study explored the adsorption of Cu(II) ion onto porous chitosan–tripolyphosphate beads, and used SEM/EDS, TGA, and XRD to examine the properties of adsorbent. The use of porous chitosan–tripolyphosphate beads to adsorb Cu(II) ion produced better and faster results than were obtained for nonporous chitosan–tripolyphosphate beads. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Adsorption of cadmium (II) and copper (II) ions from aqueous solution using chitosan composite

The binary chitosan/silk fibroin composite synthesized by reinforcement of silk fibroin fiber into the homogenous solution of chitosan in formic acid was used to investigate the adsorption of two metals of Cu(II) and Cd(II) ions in an aqueous solution. The binary composite was characterized by Fourier transform infrared and scanning electron microscopy. The optimum conditions for adsorption by using a batch method were evaluated by changing various parameters such as contact time, adsorbent dose, and pH of the solution. The experimental isotherm data were analyzed using the Freundlich and Langmuir equations, indicated to be well fitted to the Langmuir isotherm equation under the concentration range studied, by comparing the correlation co‐efficient. Adsorption kinetics data were tested using pseudo‐first‐order and pseudo‐second‐order models. Kinetics studies showed that the adsorption followed a pseudo‐second‐order reaction. Due to good performance and low cost, this binary chitosan/silk fibroin composite can be used as an adsorbent for removal of Cu(II) and Cd(II) from aqueous solutions. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Synthesis and study of optimization of amidoximated PAN‐DVB‐EGDMA beads for the sorption of uranium from aqueous media

Environmental and economic considerations have made the sorption of uranium from aqueous media a very time demanding area of research from last few decades. In this particular work, amidoximated polyacrylonitrile beads were synthesized by the reaction of hydroxyl amine hydrochloride (OH‐NH₂.HCl) with macroporous crosslinked polyacrylonitrile beads, prepared through suspension polymerization techniques, using acrylonitrile (AN) as monomer and divinylbenzene and ethyleneglycoldimethacrylate as crosslinkers, in a variety of relative compositions, to modify suitably the hydrophilicity and physicochemical stability. These beads were also characterized by FT‐IR, scanning electron microscope, and thermogravimetric analysis–differential scanning calorimetry techniques to explain the morphology and chemical functionality. The beads reached its saturation capacity towards uranyl ions well within 1 h of equilibration at ~25°C, under near neutral pH conditions and the observed maximum sorption capacity was found to be ~18 mg g^?1. The beads were also used for the sorption of uranium from various real water samples and showed good sorption from these samples. Reusability of the beads was also established up to the studied four cycles. These synthesized beads can potentially serve the dual purpose of the decontamination of uranium contaminated potable well water as well as to treat acidic radioactive waste generated in nuclear industry before final discharge to environment. POLYM. ENG. SCI., 59:863–872, 2019. © 2018 Society of Plastics Engineers     

Biosorption of phenolic compounds from aqueous solutions onto chitosan–abrus precatorius blended beads

BACKGROUND: This research focuses on understanding the biosorption process and developing a cost‐effective technology for the treatment of water contaminated with phenolic compounds (phenol, 2‐chlorophenol and 4‐chlorophenol), which are discharged into the aquatic environment from a variety of sources and are highly toxic. In order to remove phenolic compounds from water, a new biobased sorbent is developed, blending chitosan with abrus precatorius, both naturally occurring biopolymers. The resulting chitosan–abrus precatorius blended beads (CS/Ab) were characterized by Brunauer, Emmett and Teller (BET) analysis, Fourier Transform Infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) techniques under batch equilibrium and column flow experimental conditions. The binding capacity of the biosorbent was investigated as a function of initial pH, contact time, initial concentration of adsorbate and dosage of adsorbent. RESULTS: The percentage removal of phenol, 2‐CP and 4‐CP increased with increasing adsorbent dose, while the adsorption capacity at equilibrium, q_e (mg g^?1) (amount of phenol, 2‐CP and 4‐CP loaded per unit weight of adsorbent) decreased. The equilibrium time was found to be 240 min for full equilibration of all adsorbates. Adsorption kinetic and isotherm studies showed that the pseudo‐first‐order model and the Langmuir isotherm were the best choices to describe the adsorption behaviors. The maximum monolayer adsorption capacity of phenol, 2‐CP and 4‐CP on to the (CS/Ab) beads was found to be 156 mg g^?1, 204 mg g^?1 and 278 mg g^?1, respectively. CONCLUSION: The experimental results suggested that (CS/Ab) blended beads are effective in the removal of phenolic compounds from aqueous medium. Copyright © 2009 Society of Chemical Industry     

Adsorption isotherms,kinetic, and desorption studies on removal of toxic metal ions from aqueous solutions by polymeric adsorbent

Adsorption of Cd(II), Co(II), and Ni(II) on aminopyridine modified poly(styrene‐alt‐maleic anhydride) crosslinked by 1,2‐diaminoethane as an ion exchange resin has been investigated in aqueous solution. Adsorption behavior of these metal ions on the resin was studied by varying the parameters such as pH (2–6), adsorbent dose (0–4.0 g/L), contact time (0–240 min), and metal ions concentration (20–300 mg/L). Adsorption percentage was increased by increasing each of these parameters. The isotherm models such as: Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich were used to describe adsorption equilibrium. The results showed that the best fit was achieved with the Langmuir isotherm equation, yielding maximum adsorption capacities of 81.30, 49.02, and 76.92 mg/g for Cd(II), Co(II), and Ni(II), respectively. The pseudo‐first‐order, pseudo‐second‐order, and intra‐particle diffusion kinetics equations were used for modeling of adsorption data and it was shown that pseudo‐second‐order kinetic equation could best describe the adsorption kinetics. The intra‐particle diffusion study revealed that external diffusion might be involved in this case. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41642.     

Biosorption of methylene blue from aqueous solution by softstem bulrush (Scirpus tabernaemontani Gmel.)

BACKGROUND: The removal of methylene blue from aqueous solution was studied using softstem bulrush (Scirpus tabernaemontani Gmel.) as the biosorbent. The effects of various parameters including contact time, biosorbent dosage, ionic strength and solution pH on the biosorption were investigated. RESULTS: The sorption capacity increased with an increase in biosorbent dosage and a decrease in ionic strength. The equilibrium time was found to be 240 min for full equilibration. Pseudo‐first‐order, pseudo‐second‐order, Bangham equation and intraparticle diffusion models were applied to fit the kinetic data, and the results showed that the sorption process followed the pseudo‐second‐order model. Equilibrium data conformed to Langmuir and Redlich–Peterson isotherm models, with a maximum monolayer biosorption capacity of 53.8 mg g^?1 for the Langmuir isotherm at 18 °C. The value of ΔG was estimated to be ? 29.24 kJ mol^?1, indicating the spontaneous nature of the biosorption. The biosorption process was strongly pH‐dependent and favourable at alkaline pH. CONCLUSION: Softstem bulrush, which is readily available and inexpensive, could be employed as a promising biosorbent for the removal of dye. Copyright © 2008 Society of Chemical Industry     

Environmentally friendly copolymeric beads of Chlorella vulgaris and poly(methacrylamide) grafted aliginic acid di‐block copolymers for biosorption of zinc ions

The synthesis of biodegradable environmentally friendly copolymeric beads for water treatment biosorption processes is demonstrated. The synthesized poly(methacrylamide) grafted aliginic acid copolymers were characterized using ¹H NMR, Fourier transform infrared spectroscopy, TGA and SEM. The di‐block copolymers showed a morphological change from two‐dimensional layer‐by‐layer structures to three‐dimensional well‐compacted wrinkles as grafting efficiency increased. The copolymeric beads were formed from the di‐block copolymer and algae crosslinked with 5% calcium ions (w/w). These copolymeric beads were then subjected to biosorption investigations for zinc ions as a model heavy metal ion at different pH values and stirring time periods. Batch adsorption experiments showed that the copolymeric beads were effective in zinc ion removal from aqueous solutions with maximum uptake exceeding 89.0 mg g^–1 using higher grafting efficiency copolymeric beads at pH 5.5. Equilibrium pH studies revealed that zinc biosorption was pH dependent and maximum uptake was obtained at pH 5.5. Dynamics studies showed that the biosorption of zinc was rapid with equilibrium attained within 40 min and the data followed pseudo‐second‐order kinetics. The equilibrium biosorption of zinc ions on the copolymeric beads exhibited a Freundlich isotherm fit. © 2012 Society of Chemical Industry     

Synthesis and characterization of glutaraldehyde‐crosslinked calcium alginate for fluoride removal from aqueous solutions

A novel biosorbent was developed by the crosslinking of an anionic biopolymer, calcium alginate, with glutaraldehyde. The glutaraldehyde‐crosslinked calcium alginate (GCA) was characterized by Fourier transform infrared spectroscopy and porosity and surface area analysis. The batch equilibrium and column flow adsorption characteristics of fluoride onto the biosorbent were studied. The effects of the pH, agitation time, concentration of adsorbate, and amount of adsorbent on the extent of adsorption were investigated. The experimental data were fitted to the Langmuir and Freundlich adsorption isotherms. The data were analyzed on the basis of the Lagergren pseudo‐first‐order, pseudo‐second‐order, and Weber–Morris intraparticle diffusion models. The maximum monolayer adsorption capacity of the GCA sorbent as obtained from the Langmuir adsorption isotherm was found to be 73.5 mg/g for fluoride. The χ² and sum of squares of the error analysis were used to correlate the equilibrium isotherm models and kinetics. In addition, breakthrough curves were obtained from column flow experiments. The experimental results demonstrate that the GCA beads could be used for the defluoridation of drinking water through adsorption. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Vinyl triazole carrying metal‐chelated beads for the reversible immobilization of glucoamylase

Poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [poly(EGDMA–VTAZ)] beads with an average diameter of 100–200 μm were obtained by the copolymerization of ethylene glycol dimethacrylate (EGDMA) with 1‐vinyl‐1,2,4‐triazole (VTAZ). The copolymer hydrogel bead composition was determined by elemental analysis and was found to contain 5 EGDMA monomer units for each VTAZ monomer unit. The poly(EGDMA–VTAZ) beads were characterized by swelling studies and scanning electron microscopy (SEM). The specific surface area of the poly(EGDMA–VTAZ) beads was found 65.8 m²/g. Cu²⁺ ions were chelated on the poly(EGDMA–VTAZ) beads. The Cu²⁺ loading was 82.6 μmol/g of support. Cu²⁺‐chelated poly(EGDMA–VTAZ) beads with a swelling ratio of 84% were used in the immobilization of Aspergillus niger glucoamylase in a batch system. The maximum glucoamylase adsorption capacity of the poly(EGDMA–VTAZ)–Cu²⁺ beads was 104 mg/g at pH 6.5. The adsorption isotherm of the poly(EGDMA–VTAZ)–Cu²⁺ beads fitted well with the Langmuir model. Adsorption kinetics data were tested with pseudo‐first‐ and second‐order models. The kinetic studies showed that the adsorption followed a pseudo‐second‐order reaction model. The Michaelis constant value for the immobilized glucoamylase (1.15 mg/mL) was higher than that for free glucoamylase (1.00 mg/mL). The maximum initial rate of the reaction values were 42.9 U/mg for the free enzyme and 33.3 U/mg for the immobilized enzyme. The optimum temperature for the immobilized preparation of poly(EGDMA–VTAZ)–Cu²⁺–glucoamylase was 65°C; this was 5°C higher than that of the free enzyme at 60°C. The glucoamylase adsorption capacity and adsorbed enzyme activity slightly decreased after 10 batch successive reactions; this demonstrated the usefulness of the enzyme‐loaded beads in biocatalytic applications. The storage stability was found to increase with immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and adsorption properties of diethylenetriamine‐modified chitosan beads for acid dyes

This work has demonstrated that the novel chitosan derivative, synthesized by phase transition and grafting diethylenetriamine, has a great potential for the adsorption of acid dyes from aqueous solutions. Four acid dyes with different molecular sizes and structures were used to investigate the adsorption performance of diethylenetriamine‐modified chitosan beads (CTSN‐beads). Results indicated that the adsorption of dyes on CTSN‐beads was largely dependent on the pH value and controlled by the electrostatic attraction. In addition, the adsorption rate (AO10 > AO7 > AR18 > AG25) and adsorption capacities (AO7 > AR18 > AO10 > AG25) were directly related to the molecular size of the dye and the amount of the sulfonate groups on the dye molecules. The equilibrium and kinetic data fitted well with the Langmuir–Freundlich and pseudo‐second‐order model. Furthermore, thermodynamic parameters indicated that the adsorption processes occurred spontaneously and higher temperature made the adsorption easier. The reuse tests indicated that the CTSN‐beads can be recovered for multiple uses. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4090–4098, 2013     

Adsorption of Cr(VI) ions onto poly(ethylene glycol dimethacrylate‐1‐vinyl‐1,2,4‐triazole)

Poly(ethylene glycol dimethacrylate‐1‐vinyl‐1,2,4‐triazole) [poly(EGDMA‐VTAZ)] beads (average diameter = 150–200 μm) were prepared by copolymerizing ethylene glycol dimethacrylate (EGDMA) with 1‐vinyl‐1,2,4‐triazole (VTAZ). Poly(EGDMA‐VTAZ) beads were characterized by swelling studies and scanning electron microscope (SEM). The adsorption of Cr(VI) from solutions was carried at different contact times, Cr(VI) concentrations, pH, and temperatures. High adsorption rates were achieved in about 240 min. The amount of Cr(VI) adsorbed increased with increasing concentration and decreasing pH and temperature. The intraparticle diffusion rate constants at various temperatures were calculated. Adsorption isotherms of Cr(VI) onto poly(EGDMA‐VTAZ) have been determined and correlated with common isotherm equations such as Langmuir and Freundlich isotherm models. The Langmuir isotherm model appeared to fit the isotherm data better than the Freundlich isotherm model. The pseudo first‐order kinetic model was used to describe the kinetic data. The study of temperature effect was quantified by calculating various thermodynamic parameters such as Gibbs free energy, enthalpy, and entropy changes. The dimensionless separation factor (R_L) showed that the adsorption of metal ions onto poly(EGDMA‐VTAZ) was favorable. It was seen that values of distribution coefficient (K_D) decreasing with Cr(VI) concentration in solution at equilibrium (C_e) indicated that the occupation of activate surface sites of adsorbent increased with Cr(VI). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Sorption Studies of Uranium on Novel Imino Diacetamide Grafted Styrene Divinyl Benzene Polymeric Resin

Imino diacetamide styrene divinyl benzene (IDAA SDVB) resin was evaluated for the sorption of uranium from sulphuric acid medium. Uranium sorption on to the resin was fast, the kinetic data fitted well in pseudo second order kinetics model. Sorption of uranium was found to increase with the increase in initial concentration of uranium in aqueous feed solution, the sorption isotherm data fitted closely in to Langmuir isotherm model. The sorption of uranium is observed to decrease with the increase in initial feed acidity thereby, allowing sorption and desorption at lower (0.1 M H₂SO₄) and higher (1.0 M H₂SO₄) acidities, respectively.     

Copper and cadmium extraction from highly concentrated phosphoric acid solutions using calcium alginate gels enclosing bis(2,4,4‐trimethylpentyl)thiophosphinic acid

The availability of alginate gels enclosing Cyanex 302 [bis(2,4,4‐trimethylpentyl)thiophosphinic acid] for the uptake of cadmium and copper from highly concentrated solutions of industrial phosphoric acid wet process phosphoric acid (WPA)] was studied. For this purpose, beads of alginate gels enclosing microdrops of kerosene solutions of the industrial extractant Cyanex 302 at different concentrations were prepared. The experimental procedure gives rise to a composite bead in which alginate is the continuous phase and the organic extractant forms the discrete homogeneously distributed phase within the bead. The equilibrium in this three‐phase system (phosphoric acid–extractant solution–alginate gel) was modelled in terms of the corresponding distribution factors, the main chemical reactions and their equilibrium constants. Retention isotherms of both metal ions were obtained experimentally at four concentrations (1.0, 2.5, 5.0 and 7.5 mol L^?1) of pure phosphoric acid. High metal removal efficiency, due to liquid–liquid extraction processes, was observed even in the most acidic conditions. High values of the extraction constants were estimated, with the distribution coefficients between aqueous and alginate phase being near unity. Finally, the results obtained with industrial WPA are in close agreement with those predicted by the physicochemical model developed in synthetic media. Copyright © 2006 Society of Chemical Industry     

Solvent Extraction of Uranium (VI) from Chloride Solutions using Cyphos IL-101

The solvent extraction of uranium (VI) from chloride solutions by Cyphos IL-101 in xylene has been studied. Distribution coefficients were found to increase with aqueous chloride concentration and extractant concentration. The enthalpy of extraction is endothermic with ΔH = +24 ± 2 kJ·mol^?1. Based upon slope analysis, an anion exchange extraction mechanism is proposed, with formation of a UO₂Cl₄ ^2- complex in association with 4 Cyphos IL-101 ligands. The extraction kinetics were fast, with complete equilibration occurring within 30 seconds. An isotherm for uranium extraction from 1.0 mol·L^?1 chloride solution by 0.1 mol·L^?1 Cyphos IL-101 in xylene shows that 45 mmol·L^?1 uranium can be loaded into the organic phase in equilibrium with 2.1 mmol·L^?1 in the aqueous phase. The absorption spectrum of the uranium loaded solvent between 350 and 550 nm is indicative of the UO₂Cl₄ ^2- complex with only chlorides present in the inner coordination sphere, unlike the more strongly hydrogen bonded Alamine 336 extracted uranium complex. Subject to the same experimental conditions, distribution coefficients for Cyphos IL-101 were significantly greater than for Alamine 336 or Aliquat 336.     

Methacryloylamidoglutamic acid functionalized poly(2-hydroxyethyl methacrylate) beads for UO22+ removal

A novel approach was developed to obtaining high uranium adsorption capacity utilizing 2-methacryloylamidoglutamic acid (MAGA) as a metal-complexing ligand. MAGA was synthesized by using methacryloyl chloride and glutamic acid. Spherical beads with an average size of 150–200 μm were obtained by suspension polymerization of MAGA and 2-hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(2-hydroxyethyl methacrylate–methacryloylamidoglutamic acid) [p(HEMA–MAGA)] beads have a specific surface area of 56.7 m²/g. p(HEMA–MAGA) beads were characterized by swelling studies, FTIR and elemental analysis. The p(HEMA–MAGA) beads with a swelling ratio of 63%, and containing 3.5 mmol MAGA/g were used in the removal of UO₂²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 120 min. The adsorption of uranium(VI) ions onto pHEMA was negligible (1.4 mg/g). The MAGA incorporation significantly increased the uranium adsorption capacity (204.8 mg/g). Adsorption capacity of MAGA incorporated beads increased significantly with pH and then reached the maximum at pH 6.0. Consecutive adsorption and elution operations showed the feasibility of repeated use for p(HEMA–MAGA) chelating beads.     

Preparation and adsorption properties of chitosan–poly(acrylic acid) nanoparticles for the removal of nickel ions

Chitosan (CS) nanoparticles with different mean sizes ranging from 100 to 195 nm were prepared by ionic gelation of CS and poly(acrylic acid) (PAA). Variations in the final solution pH value and CS : PAA volume ratio were examined systematically for their effects on nanoparticle size, intensity of surface charge, and tendency toward particle aggregation. The sorption capacity and sorption isotherms of the CS–PAA nanoparticles for nickel ions were evaluated. The parameters for the adsorption of nickel ions by the CS–PAA nanoparticles were also investigated. The CS–PAA nanoparticles could sorb nickel ions effectively. The sorption rate for nickel ions was affected significantly by the initial concentration of the solution, sorbent amount, particle size, and pH value of the solution. The samples of nanoparticles were well correlated with Langmuir's isotherm model, and the adsorption kinetics of nickel correlated well with the pseudo‐second‐order model. The maximum capacity for nickel sorption deduced from the use of the Langmuir isotherm equation was 435 mg/g, which was significantly higher than that of the micrometer‐sized CS. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and characterization of poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) copolymer beads for heavy‐metal removal

We prepared poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [poly(EGDMA–VTAZ)] beads (average diameter = 150–200 μm) by copolymerizing ethylene glycol dimethacrylate (EGDMA) with 1‐vinyl‐1,2,4‐triazole (VTAZ). The copolymer composition was characterized by elemental analysis and found to contain five EGDMA monomer units for each VTAZ monomer unit. The poly(EGDMA–VTAZ) beads had a specific surface area of 65.8 m²/g. Poly(EGDMA–VTAZ) beads were characterized by Fourier transform infrared spectroscopy, elemental analysis, surface area measurements, swelling studies, and scanning electron microscopy. Poly(EGDMA–VTAZ) beads with a swelling ratio of 84% were used for the heavy‐metal removal studies. The adsorption capacities of the beads for Cd(II), Hg(II), and Pb(II) were investigated in aqueous media containing different amounts of these ions (5–750 mg/L) and at different pH values (3.0–7.0). The maximum adsorption capacities of the poly(EGDMA–VTAZ) beads were 85.7 mg/g (0.76 mmol/g) for Cd(II), 134.9 mg/g (0.65 mmol/g) for Pb(II), and 186.5 mg/g (0.93 mmol/g) for Hg(II). The affinity order toward triazole groups on a molar basis was observed as follows: Hg(II) > Cd(II) > Pb(II). pH significantly affected the adsorption capacity of the VTAZ‐incorporated beads. The equilibrium data were well fitted to the Redlich–Peterson isotherm. Consideration of the kinetic data suggested that chemisorption processes could have been the rate‐limiting step in the adsorption process. Regeneration of the chelating‐beads was easily performed with 0.1M HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4276–4283, 2006     

Pectin‐[(3‐acrylamidopropyl) trimethylammonium chloride‐co‐acrylic acid] hydrogel prepared by gamma radiation and selectively silver (Ag) metal adsorption

Pectin‐[(3‐acrylamidopropyl) trimethylammonium chloride‐co‐acrylic acid] hydrogel has been prepared from the aqueous blend solution of pectin, (3‐acrylamidopropyl) trimethylammonium chloride (APTAC), and acrylic acid (AAc) by applying gamma radiation of different doses (1–25 kGy) from ⁶⁰Co gamma source. The hydrogels were characterized by equilibrium swelling, Fourier transform infrared, differential scanning calorimetry, and scanning electron microscopy. The hydrogels were used in multielement adsorption and it was found that pectin‐(APTAC‐co‐AAc) gel is highly selective toward silver (I) ion among 27 metal ions. The data obtained from equilibrium adsorption studies were fitted in Langmuir and Freundlich adsorption isotherm models and model parameters evaluated. The maximum adsorption capacity of pectin‐(APTAC‐co‐AAc) gel was found to be 67.6413 mg/g of dry gel at sample volume of 25 mL. The kinetic data were tested using pseudo‐first order and pseudo‐second order kinetic models and different adsorption diffusion models such as film diffusion and intra‐particle diffusivity model. Thiourea solution was used for desorption of adsorbed metal ions from the hydrogel. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45906.