共查询到20条相似文献,搜索用时 31 毫秒
1.
A new cellulose‐based superabsorbent polymer, carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide), was prepared by the free‐radical grafting solution polymerization of acrylic acid (AA) and acrylamide (AM) monomers onto carboxymethyl cellulose (CMC) in the presence of N,N′‐methylenebisacrylamide as a crosslinker with a redox couple of potassium persulfate and sodium metabisulfite as an initiator. The influences of reaction variables such as the initiator content, crosslinker content, bath temperature, molar ratio of AA to AM, and weight ratio of the monomers to CMC on the water absorbency of the carboxymethylcellulose‐graft‐poly(acrylic acid‐co‐acrylamide) copolymer were investigated. The copolymer's structures were characterized with Fourier transform infrared spectroscopy. The optimum reaction conditions were obtained as follows: the bath temperature was 50°C; the molar ratio of AA to AM was 3 : 1; the mass ratio of the monomers to CMC was 4 : 1; and the weight percentages of the crosslinker and initiator with respect to the monomers were 0.75 and 1%, respectively. The maximum water absorbency of the optimized product was 920 g/g for distilled water and 85 g/g for a 0.9 wt % aqueous NaCl solution. In addition, the superabsorbent possessed good water retention and salt resistance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1382–1388, 2007 相似文献
2.
Lianxia Deng Haiping Zhang Mingying Yang Namita Mandal Liangjun Zhu 《Polymer Composites》2014,35(3):509-515
A series of superabsorbent polymer composites based on sericin hydrolyzed with alkaline protease (AP) were prepared by grafting with acrylic acid (AA) and acrylamide (AM). The properties of the superabsorbent polymers (SAP) by using hydrolyzed sericin with different amount of alkaline protease (nAPh‐sericin) were compared. It was found that the polymer prepared from 5APh‐sericin (the mass ratio of AP to sericin was 5.0 mg g−1) showed the highest graft percentage and water absorbency, this phenomenon may be attributed to the change of molecular weight of resulting sericin molecules. The molecular structure of the grafted polymers was proved by thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) measurements. Comparing with PAA‐AM (poly AA‐co‐AM) and 0APh‐sericin/PAA‐AM polymer, 5APh‐sericin/PAA‐AM polymer had the most excellent water retention capacity and enzyme degradability. The morphological features of the polymers with different drying methods were evidenced by SEM images. The water absorbencies of 5APh‐sericin/PAA‐AM polymer prepared with freeze‐drying were 896 g g−1 in deionized water, 424 g g−1 in tap water, and 83 g g−1 in 0.9 wt% aqueous NaCl solution. POLYM. COMPOS., 35:509–515, 2014. © 2013 Society of Plastics Engineers 相似文献
3.
Yanfei Wang Xiang Zhang Haodong Wei Bing Zhang Xu Xiang Rongfeng Chen 《Polymer Composites》2015,36(2):229-236
A novel poly(acrylic acid‐co‐acrylamide)/halloysite nanotubes [PAA‐AM/HNTs] superabsorbent composite was synthesized by free radical polymerization with using HNTs as an inorganic additive. The composite was characterized by Fourier transform infrared spectroscopy, scanning electron microscope, and thermogravimetric analysis. The results revealed that HNTs and PAA‐AM were combined well together to form a porous structure with a pore size of about 10 μm, and HNTs were uniformly distributed in the composite. The thermal stability was improved by adding HNTs in the composite. The influences of contents of initiator and halloysite, neutralization degree of AA, and molar ratio of AM to AA on water absorbency were investigated. The water absorbency and the water retention capacity were improved after adding HNTs into PAA‐AM. The composite containing 10% HNTs had the highest water absorbency of 1276 g/g in distilled water. Moreover, PAA‐AM/HNTs composite also had a high swelling rate within 60 min and could maintain 78% initial swelling capability after five reswelled test. The substantial enhancement of swelling properties enables PAA‐AM/HNTs suitable for numerous practical applications. POLYM. COMPOS., 36:229–236, 2015. © 2014 Society of Plastics Engineers 相似文献
4.
Starch and montmorrilonite (MMT) were used as raw materials for synthesizing starch‐graft‐poly[acrylamide (AM)–acrylic acid (AA)]/MMT superabsorbent nanocomposite by graft and intercalation copolymerization reaction of starch, AM, and AA in the presence of organic MMT micropowder in aqueous solution. Major factors affecting water absorbency such as weight ratio of monomers to starch, weight ratio of AM to AA, neutralization degree of AA, amount of crosslinker, initiator, and MMT were investigated. The superabsorbent nanocomposite synthesized under optimal synthesis conditions exhibits absorption of 1120 g H2O/g sample and 128 g H2O/g sample in deionized water and in 0.9 wt % NaCl solution, respectively. IR spectra showed that the graft copolymerization between OH groups on MMT and monomers took place during the reaction, and that crystal interlayer was pulled open in the superabsorbent nanocomposite. X‐ray diffraction analysis showed that the crystal interlayer of MMT was pulled open to 2.73 nm, and thus formed nanometer exfoliation composite material. Thermogravimetric analysis showed that starch‐graft‐poly (AM–AA) superabsorbent nanocomposite (8 wt % MMT) has good thermal stability. This superabsorbent nanocomposite with excellent water absorbency and water retention, being biodegradable in nature, economical and environment friendly, could be especially useful in industry, agricultural, and horticultural applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
5.
A series of novel multifunctional poly (acrylic acid‐co‐acrylamide) (PAA‐AM)/organomontmorillonite (O‐MMT)/sodium humate (SH) superabsorbent composites were synthesized by the graft copolymerization reaction of partially neutralized acrylic acid and acrylamide on O‐MMT micropowder and SH with N,N′‐methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator in an aqueous solution. The superabsorbent composites were characterized by means of Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The effect of the relative weight ratio of SH to O‐MMT on the water absorbency was studied, and the results indicated that the best water absorbency of 591 g/g in distilled water was obtained when an O‐MMT content of 20 wt % and an SH content of 30 wt % were incorporated. The superabsorbent composite possessed a good capacity for water retention; even after 30 days, 24.4 wt % of water could still be saved by the sand soil containing 1.0 wt % superabsorbent composite. The results from this study show that the water absorbency of a superabsorbent composite is improved by the simultaneous introduction of O‐MMT and SH into a PAA‐AM network in comparison with the incorporation of only O‐MMT or SH. Also, in comparison with PAA‐AM/MMT/SH, an appropriate amount of O‐MMT can benefit the developed composites with respect to their water absorbency, salt resistance, and capacity for water retention in sand soil. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 相似文献
6.
Design and synthesis of the agricultural and ecological superabsorbent materials with cost‐efficient and fertilizer‐release characteristics has recently attracted considerable interests. In this work, the novel poly(sodium‐potassium acrylate‐co‐acrylamide)/plant ash (PNa‐KA‐co‐AM/PA) superabsorbent composites with potassium‐release characteristics were prepared using partially neutralized acrylic acid (Na‐KA), acrylamide (AM), and plant ash (PA) as raw materials, ammonium persulfate (APS) as the initiator, and N,N′‐methylenebisacrylamide (MBA) as the crosslinker. The structure, morphologies, and thermal stability of the composites were characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, and TGA techniques, respectively. The effects of MBA concentration and PA content on water absorbency were studied, and the swelling properties of the composites in saline solutions and various pHs solution as well as their potassium‐release capabilities were also evaluated. Results indicate that the composites exhibit better thermal stability, salt‐resistant performance, pH‐stability, and potassium‐release properties, and can act as a fertilizer and an effective water‐saving material for agricultural and ecological application. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 相似文献
7.
A series of poly(acrylic acid‐co‐acrylamide)/kaolin [poly(AA‐co‐Am)/kaolin] composites were prepared by aqueous solution copolymerization of partially neutralized acrylic acid and acrylamide in the presence of kaolin nanopowder, which was synthesized to act as a release carrier of urea fertilizer. The superabsorbent composite was swollen in aqueous solution of urea to load urea, and the effect of urea concentration on the swelling was investigated. Furthermore, the effects of the contents of crosslinker, kaolin, and acrylamide, the neutralization degree of acrylic acid, and temperature, pH, and ionic strength of release medium on water absorbency and diffusion coefficient of urea release from poly(AA‐co‐Am)/kaolin were studied systematically. It was found that urea loading percentage could be adjusted by urea concentration of swelling medium, and urea diffusion coefficient could be regulated through the contents of crosslinker, kaolin, and acrylamide, and the neutralization degree of acrylic acid. Additionally, temperature and ionic strength of release medium may also affect the urea release process. The conclusions obtained could provide theoretical basis for urea diffusion behavior in superabsorbent used in agriculture. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007 相似文献
8.
A novel superabsorbent composite, poly(acrylic acid‐co‐acrylamide)/potassium humate (PAA‐AM/KHA), was prepared by aqueous solution polymerization from acrylic acid, acrylamide, and potassium humate (KHA) with N,N′‐methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator. The effects of incorporated KHA on the water absorbency, swelling rate, and reswelling capability were investigated. The swelling property of PAA‐AM/KHA in various saline solutions was studied systematically. The results show that the comprehensive properties and especially salt‐resistant ability of PAA‐AM/KHA were enhanced. There was a linear relationship between the saturated water absorbency and the minus square root of the ionic strength of the external medium, and the water absorbency of PAA‐AM/KHA in various salt solutions had the following order: NH4Cl(aq) = KCl(aq) = NaCl(aq) > MgCl2(aq) > CaCl2(aq) > AlCl3(aq) > FeCl3(aq). Moreover, the polymeric net structure of PAA‐AM/KHA was examined with respect to that of poly(acrylic acid‐co‐acrylamide). The results indicate that the polymeric net of PAA‐AM/KHA was improved by the introduction of a moderate amount of KHA into the superabsorbent composite and made more suitable for agriculture and horticulture applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008 相似文献
9.
黄原胶/膨润土复合高吸水性树脂的制备与性能研究 总被引:1,自引:0,他引:1
采用水溶液聚合法制备了黄原胶(XG)/膨润土有机-无机复合SAP(高吸水性树脂)。通过单因素试验法和正交试验法优选出制备复合SAP的最佳工艺条件。结果表明:丙烯酸(AA)、丙烯酰胺(AM)、XG与膨润土之间发生了接枝共聚反应;当m(AA)∶m(AM)=5∶1、AA中和度为75%、w(膨润土)=5%、w(引发剂)=1.0%和w(交联剂)=0.08%时,相应的复合SAP具有最大的吸水倍率(863.8 g/g)和吸盐水倍率(109.4 g/g)。 相似文献
10.
Da-Ting Tian Shi-Rong Li Xin-Ping Liu Jing-Shou Wang Sheng Hu Cheng-Mei Liu Hong-Quan Xie 《应用聚合物科学杂志》2012,125(4):2748-2754
A new konjac glucomannan (KGM)-based superabsorbent polymer, KGM-g-poly(acrylic acid-co-acrylamide), was prepared by the free radical grafting solution polymerization of acrylic acid (AA) and acrylamide (AM) monomers onto KGM in the presence of N,N′-methylenebisacrylamide as a crosslinker with potassium persulfate as an initiator. The effects of reaction parameters, including the amount of crosslinking agent and initiator, the weight ratio of both (AA + AM) to KGM and AM to (AA + AM), neutralization degree of AA, bath temperature, and reaction time, on the water absorbency of the superabsorbent were investigated. The Fourier transform infrared spectroscopy was used to characterize the structures of the copolymer. The maximum water absorbency of the optimized product was 650 g/g for distilled water and 70 g/g for a 0.9 wt % aqueous NaCl solution. Furthermore, the water retention of the copolymer in soils was studied. The effect of the copolymers on the aggregate distribution of soils was also evaluated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012 相似文献
11.
A novel poly(acrylate‐co‐acrylamide)/expanded vermiculite (EVMT) superabsorbent composite was synthesized by aqueous solution polymerization method. The water absorbency of the superabsorbent composite still reaches 850 g/g when 50 wt % EVMT is added, which is significant in decreasing the production cost of the superabsorbent composites. By controlling the molar ratio of acrylic acid monomer and acrylamide monomer, and neutralization degree of acrylic acid, the hydrophilic groups on the composite can be adjusted, and it is found that the collaborative absorbent effect of ? CONH2, ? COOK, and ? COOH groups is superior to that of single ? CONH2, ? COOK, or ? COOH group. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 735–739, 2007 相似文献
12.
A novel starch‐graft‐poly(acrylamide)/attapulgite superabsorbent composite was synthesized by graft copolymerization reaction of starch, acrylamide (AM), and attapulgite micropowder using N.N‐methylene‐bisacrylamide (MBA) as a crosslinker and ammonium persulphate (APS) as an initiator in aqueous solution, followed by hydrolysis with sodium hydroxide. The effects on water absorbency, such as amount of crosslinker, initiator, attapulgite, weight ratio of acrylamide to starch in the feed, gelatinization conditions of starch and molar ratio of NaOH to acrylamide, and so forth, were investigated. These superabsorbent composites were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The water absorbencies for these superabsorbent composites in water and saline solution were investigated, and water retention tests were carried out. Results obtained from this study showed that the water absorbency of superabsorbent composite synthesized under optimal synthesis conditions with an attapulgite content of 10% exhibit absorption of 1317 g H2O/g sample and 68 g H2O/g sample in distilled water and in 0.9 wt % NaCl solution, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1351–1357, 2005 相似文献
13.
A series of superabsorbent composites were prepared from acrylic acid (AA), acrylamide (AM), and Cloisite® 30B by aqueous solution polymerization technique using ammonium peroxodisulfate (APS) as initiator. The interaction of the organically modified nanoclay with PAA‐co‐PAM copolymer was verified by FTIR, whereas the morphology of the composite was studied by Scanning Electron Microscopy (SEM). The water absorbency in deionized water and saline water of the synthesized nanohydrogels was measured by calculating their percentage swelling ratio. The effects of copolymerization, monomer ratio, clay content, and temperature on the water absorbency were studied. The results indicated a considerable increase in swelling ratio by proper monomer proportion and incorporation of optimum clay percentage into the copolymer matrix. It was found that the nanohydrogel acquired highest water absorbency with 2% clay loading. The reswelling ability and water retention capacity of the PAA‐co‐PAM hydrogel and PAA‐co‐PAM/clay nanohydrogel were also measured. The water absorbency was found to increase after each reswelling for which it may be useful as recyclable superabsorbent material. The results of water retention capacity of the nanohydrogel were also encouraging and find application in agriculture, especially in drought‐prone areas. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
14.
Shuming Tao Jun Liu Kemo Jin Xiaoyun Qiu Yuan Zhang Xueqin Ren Shuwen Hu 《应用聚合物科学杂志》2011,120(4):2103-2111
Triple polymer coated with controlled‐release water retention fertilizer (TCWF) and enhanced mechanical property was developed by coating polyethylene (first layer), poly (acrylic acid‐co‐acrylamide) superabsorbent (second layer), and poly (butyl methacrylate) (third layer) consecutively on the granule core urea in the fluidized‐bed coater. The inner layer possessed controlled‐release property, the middle layer had water absorbent characteristic, and the thin outer layer aimed to protect the fragile layer of the superabsorbent. The relationship between the thickness of coating layer and the nutrient releasing properties was established. The effects of polymerization parameters on the water absorbency of the superabsorbent were studied and optimized as well. The nutrients release behaviors of this triple‐coated urea in both water and soil were investigated and compared. The results showed that TCWF not only performed as a good controlled‐release fertilizer but also had excellent water retention capacity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
15.
Buning Zhang Yingde Cui Guoqiang Yin Xinming Li Liewen Liao Xibin Cai 《Polymer Composites》2011,32(5):683-691
A novel superabsorbent polymer composite was synthesized by graft copolymerization of cottonseed protein and acrylic monomers in order to explore the new application of cottonseed protein in nonfood field. This composite was synthesized by solution based copolymerization, using partly neutralized acrylic acid, acrylamide and cottonseed protein as raw material, N,N‐methylene bisacrylamide as crosslinking agent, potassium persulphate and sodium sulfite as the initiators. The effects of the certain variables of the copolymerization on the water absorbency of the synthesized composite were measured. The chemical structure of the composite was characterized by means of Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetry analysis. The swelling properties of the composite were carried out under varying pH conditions. Further, the saline sensitivity, swelling kinetics and water retention ability of the composite was investigated. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers 相似文献
16.
P(AA/AM/APEG)/纳米二氧化硅复合高吸水树脂的合成及性能 总被引:1,自引:0,他引:1
以丙烯酸(AA)、丙烯酰胺(AM)、烯丙基聚氧乙烯醚(APEG)为单体,再引入纳米二氧化硅(nano-SiO_2),以过硫酸铵为引发剂,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,采用水溶液聚合法制备了P(AA/AM/APEG)/纳米二氧化硅有机/无机复合高吸水性树脂,考察了交联剂加量、引发剂加量、纳米二氧化硅加量对树脂吸水倍率的影响,并用红外光谱和扫描电镜对产物进行了表征。结果表明:合成最佳条件加入纳米二氧化硅能提高树脂的吸水性能,粒径在80~120目时,复合树脂吸水倍率达到1 865 g/g,P(AA/AM/APEG)树脂吸水倍率为1 681g/g;温度在20~60℃时,复合吸水树脂吸水倍率变化幅度不大;pH在6~8时,其吸水性能最好,吸水倍率为1 865~1 444 g/g;此外,复合树脂具有较好的保水性能,树脂常温下保存15 d,其保水率达到83.2%。红外光谱和扫描电镜分析表明,纳米二氧化硅成功接枝到聚合物上并形成海绵状结构。 相似文献
17.
This article reports the cointercalation of acrylic acid (AA) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) in the interlayer region of Mg2Al layered double hydroxide (LDH) and the application of this inorganic–organic composite material in the field of water superabsorbent. The monomers of AA and AMPS were cointercalated into galleries of Mg2Al−LDH (denoted as AA−AMPS/LDH) with various molar ratios by ion‐exchange method, which was confirmed by powder X‐ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), and elemental analysis. The polymer‐based superabsorbent was prepared through in situ free‐radical aqueous copolymerization of AA and AMPS, with AA−AMPS/LDH as additive, N,N′‐methylenebisacrylamide (NMBA) as crosslinker and potassium persulfate (KPS) as initiator. The composition of this poly(AA‐co‐AMPS)/LDH was demonstrated as a good water superabsorbent. The LDH content, water absorbency, thermal stability, and swelling rate of this superabsorbent were also investigated in detail. Results showed that the incorporation of a 5 wt % AA−AMPS/LDH into polymer matrix increased its water absorbency significantly by 27.7% (in water) and by 51.5% (in 0.9 wt % NaCl solution). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
18.
Modification of a nicotinic acid functionalized water‐soluble acrylamide sulfonate copolymer for chemically enhanced oil recovery
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Shaohua Gou Man Liu Zhongbin Ye Lihua Zhou Wenchao Jiang Xiaoxiao Cai Yang He 《应用聚合物科学杂志》2014,131(8)
N,N‐Diallyl nicotinamide (DANA) and acrylic acid (AA) were used to react with acrylamide (AM) and synthesize a novel nicotinic acid functionalized water‐soluble copolymer AM/AA/DANA by redox free‐radical polymerization. Then, the acrylamide/sodium acrylamido methanesulfonate/acrylic acid/N,N‐diallyl nicotinamide (AM/AMS/AA/DANA) was obtained by the introduction of the ? SO3? group into AM/AA/DANA after sulfomethylation. The optimal reaction conditions, such as the monomer ratio, initiator concentration, reaction temperature, and pH of the copolymerization or sulfomethylation, were investigated. Both AM/AA/DANA and AM/AMS/AA/DANA were characterized by IR spectroscopy, 1H‐NMR, scanning electron microscopy, and intrinsic viscosity testing. We found that the AM/AMS/AA/DANA had a remarkable temperature tolerance (120°C, viscosity retention rate = 39.8%), shear tolerance (1000 s?1, viscosity retention rate = 23.3%), and salt tolerance (10 g/L NaCl, 1.5 g/L MgCl2, 1.5 g/L CaCl2, viscosity retention rates = 37.4, 27.5, and 21.6%). In addition, the result of the core flood test showed that the about 13.1% oil recovery could be enhanced by 2.0 g/L AM/AMS/AA/DANA at 70°C. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40165. 相似文献
19.
Superabsorbents used in agricultural and ecological projects with low‐cost, slow‐release fertilizers and environmentally friendly characteristics have been extensively studied. The use of a natural polymer as the matrix and then further polymerization with some functional material has become the preferred method. In this work, with natural guar gum (GG), partially neutralized acrylic acid, and sodium humate (SH) as the raw materials, ammonium persulfate as the initiator, and N,N′‐methylenebisacrylamide (MBA) as the crosslinker, GG‐g‐poly(sodium acrylate) (PNaA)/SH superabsorbents were synthesized through a solution polymerization reaction and were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The effects of the SH content and MBA concentration on the water absorbency were investigated. The results showed that the introduction of SH into the GG‐g‐PNaA system could improve the water absorbency, swelling rate, pH‐resistant property, and reswelling capability, and the superabsorbent containing 15 wt % SH had the highest water absorbency of 532 g/g of sample in distilled water and 62 g/g of sample in a 0.9 wt % NaCl solution. The slow release in water and water retention in sandy soil tests revealed that the superabsorbent could act as a fertilizer as well as an effective water‐saving material for agricultural applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
20.
Tao Wan Runqiu Huang Qihua Zhao Lei Xiong Lili Qin Xuemei Tan Guojun Cai 《应用聚合物科学杂志》2013,130(5):3404-3410
A novel wheat straw composite superabsorbent was prepared by graft polymerization with acrylic acid (AA), acrylamide (AM), and maleic anhydride‐modified wheat straw in aqueous solution, using N,N‐methylene‐bis‐acrylamide (MBA) as a cross‐linker and ammonium persulfate (APS) and sodium bisulfite (SBS) as redox initiators. Factors influencing the degree of carboxylation, such as reaction time, reaction temperature, and the amount of maleic anhydride, were investigated. Morphologies and structure of the wheat straw composite superabsorbent were characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and X‐ray diffraction (XRD). Water absorption of wheat straw composite superabsorbent was rapid, requiring 13.1 min to reach 63% of equilibrium absorbency (781 g/g). FTIR spectra indicate that maleic anhydride has been reacted onto the wheat straw backbone and the structure of wheat straw graft copolymer is formed. SEM data show that the fibrous morphology of wheat straw disappears and gel aggregates with many large microporous holes are formed after wheat straw graft modification. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3404–3410, 2013 相似文献