Visible light photocatalytic activity of TiO2/heat‐treated PVC film

BACKGROUND: Semiconductor TiO₂ has been investigated extensively due to its chemical stability, nontoxicity and inexpensiveness. However, the wide band gap of anatase TiO₂ (about 3.2 eV) only allows it to absorb UV light. TiO₂ nanoparticles modified by conditional conjugated polymers show excellent photocatalytic activity under visible light. However, these conjugated polymers are not only expensive, but also difficult to process. Polyvinyl chloride (PVC) was heat‐treated at high temperature to remove HCl and a C?C conjugated chain structure was obtained. When TiO₂ nanoparticles were dispersed into the conjugated polymer film derived from PVC, this composites film exhibited high visible light photocatalytic activity. RESULTS: The photocatalytic activity of TiO₂/heat‐treated PVC (HTPVC) film was investigated by degrading Rhodamine B (RhB) under visible light irradiation. The photodegradation of RhB follows apparent first‐order kinetics. The rate constants of RhB photodegradation in the presence of the TiO₂/HTPVC films with different mass content of TiO₂ are 16–56 and 4–14 times that obtained in the presence of the pure HTPVC and TiO₂/polymethyl methacrylate (PMMA) composite film, respectively. The TiO₂/HTPVC film showed excellent photocatalytic activity and stability after 10 cycles under visible light irradiation. CONCLUSION: TiO₂/HTPVC film exhibits high visible light photocatalytic activity and stability. Copyright © 2012 Society of Chemical Industry     

Photodegradation of o‐Cresol with Ag Deposited on TiO2 under Visible and UV Light Irradiation

This study investigated the effect of dosage of Ag on the characteristics of TiO₂, quantum yield, and temporal decomposition behavior of o‐cresol in an annular reactor under ultraviolet (UV) and visible light irradiation. In order to extend light absorption and minimize the rapid recombination during photoreaction, the Ag deposited on TiO₂ photocatalysts was prepared by a photodeposition process. The results of diffuse reflectance spectra (DRS) indicated that Ag deposited on TiO₂ promoted the optical absorption in the visible region and made it possible for it to be excited by visible light. The degradation rate of o‐cresol with 0.50 wt % Ag/TiO₂ under visible light irradiation was 2.0 times that with pure TiO₂.     

Modified microwave method for the synthesis of visible light-responsive TiO2/MWCNTs nanocatalysts

Recently, TiO₂/multi-walled carbon nanotube (MWCNT) hybrid nanocatalysts have been a subject of high interest due to their excellent structures, large surface areas and peculiar optical properties, which enhance their photocatalytic performance. In this work, a modified microwave technique was used to rapidly synthesise a TiO₂/MWCNT nanocatalyst with a large surface area. X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy and Brunauer-Emmett-Teller measurements were used to characterise the structure, morphology and the surface area of the sample. The photocatalytic activity of the hybrid nanocatalysts was evaluated through a comparison of the degradation of methylene blue dye under irradiation with ultraviolet and visible light. The results showed that the TiO₂/MWCNT hybrid nanocatalysts degraded 34.9% of the methylene blue (MB) under irradiation with ultraviolet light, whereas 96.3% of the MB was degraded under irradiation with visible light.     

Adsorption and degradation of the cationic dyes over Co doped amorphous mesoporous titania–silica catalyst under UV and visible light irradiation

Cobalt doped amorphous mesoporous titania–silica with Ti/Si mass ratio of 0.8 (Co–TiO₂–SiO₂) was synthesized and used for the photodegradation of six cationic dyes (gentian violet, methyl violet, methylene blue, fuchsin basic, safranine T, and Rhdamine B) under UV and visible light illumination. The catalyst was characterized by a combination of various physicochemical techniques, such as N₂ physisorption, diffuse reflectance UV–vis, X-ray diffraction, and FT-IR.Co–TiO₂–SiO₂ exhibited activity under UV light and had better activity under visible light when compared with that of Degussa P25 TiO₂. The activity of Co–TiO₂–SiO₂ was also compared with that of Co-MCM-41, Co doped mesoporous titania with a crystalline framework (Co–MTiO₂) and titania-loaded Co doped MCM-41 (TiO₂/Co-MCM-41) for the degradation of gentian violet under visible light irradiation. It was also found that the degradation rates of Co–TiO₂–SiO₂ for gentian violet, methyl violet, methylene blue, fuchsin basic and safranine T were greater in alkaline media than in acid and neutral media, while it did not exhibit any significant activity for the photodegradation of Rhdamine B in alkaline media or in acid media under visible light irradiation.     

Two-Functional Direct Current Sputtered Silver-Containing Titanium Dioxide Thin Films

The article reports on structure, mechanical, optical, photocatalytic and biocidal properties of Ti–Ag–O films. The Ti–Ag–O films were reactively sputter-deposited from a composed Ti/Ag target at different partial pressures of oxygen on unheated glass substrate held on floating potential U _fl. It was found that addition of ~2 at.% of Ag into TiO₂ film has no negative influence on UV-induced hydrophilicity of TiO₂ film. Thick (~1,500 nm) TiO₂/Ag films containing (200) anatase phase exhibit the best hydrophilicity with water droplet contact angle (WDCA) lower than 10° after UV irradiation for 20 min. Thick (~1,500 nm) TiO₂/Ag films exhibited a better UV-induced hydrophilicity compared to that of thinner (~700 nm) TiO2/Ag films. Further it was found that hydrophilic TiO₂/Ag films exhibit a strong biocidal effect under both the visible light and the UV irradiation with 100% killing efficiency of Escherichia coli ATCC 10536 after UV irradiation for 20 min. Reported results show that single layer of TiO₂ with Ag distributed in its whole volume exhibits, after UV irradiation, simultaneously two functions: (1) excellent hydrophilicity with WDCA < 10° and (2) strong power to kill E. coli even under visible light due to direct toxicity of Ag.     

Photocatalytic degradation of dyestuff wastewater under visible light irradiation using micron‐sized mixed crystal TiO2 powders

A phase transformation of micron‐sized TiO₂ powder from anatase to rutile was attempted by heat‐treatment in order to generate a new mixed crystal TiO₂ with high associated photocatalytic activity. Heat‐treated micron‐sized TiO₂ powders at different transition stages were characterized by X‐ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FT‐IR) and transmission electron microscopy (TEM) methods. The tests of photocatalytic activity of the heat‐treated micron‐sized TiO₂ powders were conducted by the photocatalytic degradation of Rhodamine B and Acid Red B under visible light irradiation. The results indicate that mixed crystal TiO₂ photocatalyst heat‐treated at 400 °C for 60 min shows the highest photocatalytic activity. It can effectively decompose the Rhodamine B and Acid Red B in aqueous solution after 6 h visible light irradiation. A remarkable improvement in photocatalytic activity of TiO₂ is caused by the formation of combined rutile–anatase phases and separation of photogenerated electron–hole pairs. Copyright © 2007 Society of Chemical Industry     

A Novel Method for Preparing V-doped Titanium Dioxide Thin Film Photocatalysts with High Photocatalytic Activity Under Visible Light Irradiation

The liquid phase deposition (LPD) method was successfully used for preparing V-doped TiO₂ thin film photocatalysts. In this simple and easily-controlled process, V-doped anatase TiO₂ thin films were directly deposited on a soda lime glass substrate placed in an aqueous solution containing Ti- and V-fluoro complex ions, followed by annealing. The thin films were analyzed by XRD, XPS, UV-vis. V⁴⁺ ions were introduced into the lattice of TiO₂ through in-situ substituting Ti⁴⁺. The absorption edge of V-doped TiO₂ films shifted to visible light region. The highly efficient photocatalytic activity was verified by the decomposition of methylene blue under visible light irradiation.     

Efficient decomposition of organic compounds with FeTiO3/TiO2 heterojunction under visible light irradiation

FeTiO₃/TiO₂, a new heterojunction-type photocatalyst working at visible light, was prepared by a simple sol–gel method. Not only did FeTiO₃/TiO₂ exhibit greatly enhanced photocatalytic activity in decomposing 2-propanol in gas phase and 4-chlorophenol in aqueous solution, but also it induced efficient mineralization of 2-propanol under visible light irradiation (λ ≥ 420 nm). Furthermore, it showed a good photochemical stability in repeated photocatalytic applications. FeTiO₃ showed a profound absorption over the entire visible range, and its valence band (VB) position is close to that of TiO₂. The unusually high photocatalytic efficiency of the FeTiO₃/TiO₂ composite was therefore deduced to be caused by hole transfer between the VB of FeTiO₃ and TiO₂.     

Silver-modified TiO2 nanorods with enhanced photocatalytic activity in visible light region

Silver-modified TiO₂ nanorods (SMTN) have been synthesized via controlled hydrolysis of tetrabutyltitanate (TBOT) in ethanol and immersion method by using AgNO₃ as an Ag source. The physical and chemical properties of SMTN were studied by XRD, SEM, TEM, and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activity of the as-prepared products was evaluated by photocatalytic decolorization of Rhodamine B (Rh B) aqueous solution at ambient temperature under visible light irradiation. The experimental results reveal that the TiO₂ nanorods, which are well dispersed and uniform, attached large numbers of silver nanoparticles on the surface, and the major crystalline phase of TiO₂ is anatase. The photocatalytic activity research shows that the SMTN exhibit an enhanced photocatalytic activity in visible light region compared with that of pure TiO₂ nanorods and commercial TiO₂ (P25).     

Visible light driven photodynamic anticancer activity of graphene oxide/TiO2 hybrid

Graphene oxide/TiO₂ hybrid (GOT) was prepared by using Ti(OC₄H₉)₄ and graphene oxide (GO) as reactants. Superior adsorption and photocatalysis performance under visible radiation were achieved in the presence of the GOT rather than in unmodified TiO₂. GO that no toxicity in vitro acted as electron sink in GOT efficiently enhance the photodynamic activities. Consistent with photocatalytic performance of TiO₂, GOT generated reactive oxygen species after visible light irradiation both in cell free condition and in vitro. No dark cytotoxicity was observed using 0–100 μg/mL GOT during long incubation time. In parallel, following exposure of cells to GOT and irradiation, a marked decrease in mitochondrial membrane potential, cell viability, activities of superoxide dismutase, catalase and glutathione peroxidase, as well as increased malondialdehyde production were observed. Moreover, GOT caused significant elevation in caspase-3 activity, and induced apoptotic death. The results indicated that GOT had excellent photodynamic anticancer activity without dark cytotoxicity.     

Iridium,carbon and nitrogen multiple-doped TiO2 Nanoparticles with enhanced photocatalytic activity

The aim of this research is to enhance the photocatalytic activity of TiO₂ nanoparticles for the UV–visible light by multiple-doping with Iridium, carbon and nitrogen. The tridoped TiO₂ photocatalyst were prepared by wet chemical method, and characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet-visible light diffuse reflection spectroscopy and room temperature photoluminescence spectroscopy. Besides, the photocatalytic H₂ evolution performance of Ir-C-N tridoped TiO₂ under UV–visible light irradiation was evaluated. It was found that Ir existed as Ir⁴⁺ by substituting Ti in the lattice of TiO₂; meanwhile, C and N were also incorporated into the surface of TiO₂ nanoparticles in interstitial mode. Meanwhile, Ir-C-N tridoping extended the absorption of TiO₂ into the visible light region and narrowed its band gap to ~3.0 eV, resulting in enhanced photocatalytic H₂ evolution under UV–visible light irradiation. This could be attributed to narrow band gap and proper electronic structure of TiO₂ after Ir-C-N tridoping.     

Photocatalytic Decomposition of Formic Acid Under Visible Light Irradiation Over V-ion-implanted TiO2 Thin Film Photocatalysts Prepared on Quartz Substrate by Ionized Cluster Beam (ICB) Deposition Method

Unique visible-light-responsive TiO₂ photocatalysts (λ>450 nm) were successfully developed by implantation of V ions into the TiO₂ thin films prepared on a quartz substrate by an ionized cluster beam (ICB) deposition method. After V ions implantation into TiO₂ thin film, the photocatalytic activity of the thin films for the decomposition of formic acid into CO₂ and H₂O was found to proceed efficiently under visible light irradiation longer than 450 nm. The TiO₂ thin film photocatalysts were characterized by XRD, UV-vis, XPS, FE-SEM and AFM.     

Photoelectrocatalytic properties of Ag nanoparticles loaded TiO2 nanotube arrays prepared by pulse current deposition

A pulse current deposition technique was adopted to construct highly dispersed Ag nanoparticles on TiO₂ nanotube arrays which were prepared by the electrochemical anodization. The morphology, crystallinity, elemental composition, and UV-vis absorption of Ag/TiO₂ nanotube arrays were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). In particular, the photoelectrochemical properties and photoelectrocatalytic activity under UV light irradiation and the photocatalytic activity under visible light irradiation for newly synthesized Ag/TiO₂ nanotube arrays were investigated. The maximum incident photon to charge carrier efficiency (IPCE) value of Ag/TiO₂ nanotube arrays was 51%, much higher than that of pure TiO₂ nanotube arrays. Ag/TiO₂ nanotube arrays exhibited higher photocatalytic activities than the pure TiO₂ nanotube arrays under both UV and visible light irradiation. The photoelectrocatalytic activity of Ag/TiO₂ nanotube arrays under UV light irradiation was 1.6-fold enhancement compared with pure TiO₂ nanotube arrays. This approach can be used in synthesizing various metal-loaded nanotube arrays materials.     

Photocatalytic activity of undoped and sulfur-doped TiO2 films grown by MOCVD for water treatment under visible light

Titanium dioxide ceramic coatings have been used as catalysts in green technologies for water treatment. However, without the presence of a dopant, its photocatalytic activity is limited to the ultraviolet radiation region. The photocatalytic activity and the structural characteristics of undoped and sulfur-doped TiO₂ films grown at 400 °C by metallorganic chemical vapor deposition (MOCVD) were studied. The photocatalytic behavior of the films was evaluated by methyl orange dye degradation under visible light. The results suggested the substitution of Ti⁴⁺ cations by S⁶⁺ ions into TiO₂ structure of the doped samples. SO₄^2? groups were observed on the surface. S-TiO₂ film exhibited good photocatalytic activity under visible light irradiation, and the luminous intensity strongly influences the photocatalytic behavior of the S-TiO₂ films. The results supported the idea that the sulfur-doped TiO₂ films grown by MOCVD may be promising catalysts for water treatment under sunlight or visible light bulbs.     

Polyvinyl pyrrolidone aided preparation of TiO2 films used in flexible dye-sensitized solar cells

Polyvinyl pyrrolidone (PVP) is introduced to low temperature preparation of a good quality TiO₂ film used in flexible dye-sensitized solar cells (DSSCs). The samples are characterized by scanning electron microscopy and UV–vis absorption spectra, the photovoltaic performance of the DSSC is measured. It is found that PVP can improve the dispersion of TiO₂ particles and the adherence of TiO₂ particles to flexible substrate, as well as the adsorption of sensitized dye to TiO₂ film. Additionally, ultraviolet light irradiation can eliminate organics remained on the surface the TiO₂ film and improve the surface state of TiO₂ film. Under an optimal condition, a flexible DSSC using TiO₂ film doped PVP and UV irradiation treated achieves a light-to-electric energy conversion efficiency of 3.02% under irradiation with a simulate solar light intensity of 100 mW cm⁻².     

Microwave-assisted synthesis of Ag–TiO2/graphene composite for hydrogen production under visible light irradiation

Novel photocatalysts based on silver (Ag), TiO₂, and graphene were successfully synthesized by microwave-assisted hydrothermal method. The prepared photocatalysts were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) specific surface area analysis, X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The influence of silver loading and graphene incorporation on photocatalytic hydrogen (H₂) production of as-prepared samples was investigated in methanolic aqueous solution under visible light irradiation (λ≥420 nm). The results showed that Ag–TiO₂/graphene composite had appreciably enhanced photocatalytic H₂ production performance under visible light illumination compared to pure TiO₂, Ag–TiO₂ and TiO₂/graphene samples. The enhanced photocatalytic hydrogen production activity of Ag–TiO₂/graphene composite under visible light irradiation could be attributed to increased visible light absorption, reduced recombination of photogenerated charge carriers and high specific surface area. This novel study provides more insight for the development of novel visible light responsive TiO²⁻ graphene based photocatalysts for energy applications.     

Ceramic tiles coated with Zr-Ag co-doped TiO2 thin film for indoor air purifying and antimicrobial applications

In this study, Zr-Ag co-doped TiO₂ (ZAT) photocatalyst films having varied numbers of layers (1, 2, 3, and 4) have been developed to coat on ceramic tile substrates by sol-gel spin coating technique. The specimens were tested to determine antibacterial activity against Escherichia coli and the capability to degrade gaseous formaldehyde under visible light. X-ray diffraction, ultraviolet and visible absorption spectroscopy, water contact angle, and scanning electron microscopy were applied to characterize the structural and morphological properties of the samples. The photocatalytic reactivity of the nanocomposite films was investigated by the decolorization of methylene blue (MB) dye under visible light irradiation. The results showed that the two-layer ZAT photocatalyst film on ceramic tile exhibited the highest photocatalytic decolorization of MB, with 60.36% efficiency. The ZAT tile had formaldehyde degradation efficiency up to 32.74% within only 6 h under visible light irradiation, higher than that of the bare ceramic tile (4.90%). Additionally, the ZAT thin films could enhance anti-E. coli activity and could be capable of degrading air pollution.     

Facile preparation of flake-like blue TiO2 nanorod arrays for efficient visible light photocatalyst

Different kinds of oriented TiO₂ nanorod arrays have been actively pursuing in recent years, however, these fabrications relied on the substrates, such as fluorine-doped tin oxide glass (FTO), silicon wafer or other semiconductor precursor layer. Herein, a stable Ti³⁺ and oxygen vacancies doped blue TiO₂ flakes composed of oriented nanorod arrays were synthesized using a facile hydrothermal treatment in diluted hydrochloric acid solution. Such centimeter-scale flake-like TiO₂ product was obtained without any substrate. Since Ti³⁺ self-doped and/or oxygen vacancies TiO₂ could extend the absorption range of TiO₂ to visible light region, the blue TiO₂ sample exhibited excellent photocatalytic activity under visible light irradiation (photocatalytic degradation efficiency can nearly reach up to 100% within 60?min).     

Ag nanoparticles loaded TiO2/MWCNT ternary nanocomposite: A visible-light-driven photocatalyst with enhanced photocatalytic performance and stability

A visible light active photocatalyst, Ag/TiO₂/MWCNT was synthesized by loading of Ag nanoparticles onto TiO₂/MWCNT nanocomposite. The photocatalytic activity of Ag/TiO₂/MWCNT ternary nanocomposite was evaluated for the degradation of methylene blue dye under UV and visible light irradiation. Ag/TiO₂/MWCNT ternary nanocomposite exhibits (~9 times) higher photocatalytic activity than TiO₂/MWCNT and (~2 times) higher than Ag/TiO₂ binary nanocomposites under visible light irradiation. The enhancement in the photocatalytic activity is attributed to the synergistic effect between Ag nanoparticles and MWCNT, which enhance the charge separation efficiency by Schottky barrier formation at Ag/TiO₂ interface and role of MWCNT as an electron reservoir. Effect of different scavengers on the degradation of methylene blue dye in the presence of catalyst has been investigated to find the role of photogenerated electrons and holes. Simultaneously, the Ag/TiO₂/MWCNT shows excellent photocatalytic stability. This work highlights the importance of Ag/TiO₂/MWCNT ternary nanocomposite as highly efficient and stable visible-light-driven photocatalyst for the degradation of organic dyes.     

Preparation of polyaniline-modified TiO2 nanoparticles and their photocatalytic activity under visible light illumination

Titanium dioxide nanoparticles were modified by polyaniline (PANI) using ‘in situ’ chemical oxidative polymerization method in hydrochloric acid solutions. Powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy spectrum (XPS) and UV–vis spectra were carried out to characterize the composites with different PANI contents. The photocatalytic degradation of phenol was chosen as a model reaction to evaluate the photocatalytic activities of the modified catalysts. Results show that TiO₂ nanoparticles are deposited by PANI to mitigate TiO₂ particles agglomeration. The modification does not alter the crystalline structure of the TiO₂ nanoparticles according to the X-ray diffraction patterns. UV–vis spectra reveal that PANI-modified TiO₂ composites show stronger absorption than neat TiO₂ under the whole range of visible light. The resulting PANI-modified TiO₂ composites exhibit significantly higher photocatalytic activity than that of neat TiO₂ on degradation of phenol aqueous solution under visible light irradiation (λ ≥ 400 nm). An optimum of the synergetic effect is found for an initial molar ratio of aniline to TiO₂ equal to 1/100.