Characteristics of cellulose isolated by a totally chlorine‐free method from Caragana korshinskii

The chemical composition and fiber morphology of Caragana korshinskii were investigated in this study. Isolation of cellulose was performed in a nonsulfur acetic acid/nitric acid system under various conditions. The influence of three factors, i.e., nitric acid concentration (0, 2, 4, 6, 8, or 10%), temperature (95, 100, 110, 115, 120, or 130°C), and reaction time (30, 40, 50, 60, or 90 min) on the cellulose properties (viscosity, yield, and molecular weight) was studied. The cellulose isolated was characterized by using Fourier transform infrared, gas chromatography, high performance liquid chromatography, solid‐state cross‐polarization magic angle spinning carbon‐13 nuclear magnetic resonance, wide‐angle X‐ray diffraction, and thermogravimetric analysis/differential scanning calorimetry techniques. The results showed that the treatment using 80% acetic acid and nitric acid as a catalyst under the given conditions resulted in slight acetylation of the cellulose and increased the degree of crystallinity of cellulose except for significant degradation of lignin and hemicellulosic polymers. The thermal stability of the cellulose declined with an increase in nitric acid concentration. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3251–3263, 2006     

Synthesis and characterization of the new cellulose derivative films based on the hydroxyethyl cellulose prepared from “Stipa Tenacissima” cellulose of Eastern Morocco. I. Solubility study

Hydroxyethyl cellulose Acetate (HECA) was prepared starting from hydroxyethyl cellulose (HEC), acetic anhydride and perchloric acid which was used as catalyst. The synthesized product was characterized by FTIR, ¹³C NMR, and ¹H NMR. Substitution degree (DS) of HECA was determined using FTIR spectra taking a classical titration method as reference. The ¹H NMR spectroscopy was also used to confirm the results obtained by FTIR. The DS is substantially affected by the temperature, the time of reaction and especially the equivalent number (eq. nb.) of the acetic anhydride added. We have studied and discussed in the context of usage in modification reactions, the solubility of the HECA samples by varying their DS. This investigation was based on the determination of the Flory‐Huggins interaction parameters (χ_SP) using the partial Hansen solubility parameters (HSP). HSP of HEC and the HECA samples were calculated from the Van‐Krevlen‐Hoftyze (VKH) method and the T. Lindvig approximation. We have focused our work on predicting and controlling family solvents of HECA with various DS, to facilitate and to optimize the homogenous modification reaction conditions. From results on a range of HECA samples, it is conclude that their prediction solubility taking the value of DS into account is possible, and then the surface modification can relatively be easily realized. The thermal analysis study shows some differences in T_g and thermal degradation between HEC and HECA, moreover these thermal temperatures are influenced by DS values. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Comparative study of cellulose isolated by totally chlorine‐free method from wood and cereal straw

Highly purified cellulose preparations were obtained by pretreatment of dewaxed barley straw, oil palm frond fiber, poplar wood, maize stems, wheat straw, rice straw, and rye straw with 2.0% H₂O₂ at 45°C and pH 11.6 for 16 h, and sequential purification with 80% acetic acid–70% nitric acid (10/1, v/v) at 120°C for 15 min. The purified cellulose obtained was relatively free of bound hemicelluloses (2.3–3.2%) and lignin (0.4–0.6%) and had a yield of 35.5% from barley straw, 39.6% from oil palm frond fiber, 40.8% from poplar wood, 36.0% from maize stems, 34.1% from wheat straw, 23.4% from rice straw, and 35.8% from rye straw. The weight‐average molecular weights of the purified cellulose ranged from 39,030 to 48,380 g/mol. The thermal stability of the purified cellulose was higher than that of the corresponding crude cellulose. In comparison, the isolated crude and purified cellulose samples were also studied by Fourier transform IR and cross‐polarization/magic‐angle spinning ¹³C‐NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 322–335, 2005     

Electroactive Paper Actuator Made with Chitosan‐Cellulose Films: Effect of Acetic Acid

This paper introduces an electroactive paper (EAPap) prepared with cellulose and chitosan films. The fabrication process, performance test, and the effect of acetic acid dosage of the EAPap were investigated. For the fabrication of cellulose EAPap, cellulose fibers were dissolved into a solution using N,N‐dimethylacetamide and lithium chloride. The solution was cast and immersed in water to form a cellulose film, followed by casting chitosan/acetic acid and glycerol aqueous solutions on the cellulose film. A bending EAPap actuator was made by depositing thin gold electrodes on both sides of the cellulose film. The bending displacement of the EAPap actuators was evaluated with respect to voltage, frequency, humidity, and acetic acid dosage. An optimum mole ratio of the acetic acid and chitosan structure unit was found. Also, the effects of chitosan and acetic acid on the actuation behavior of the cellulose‐chitosan laminated films were investigated.

     

Graft copolymerization of acrylic acid onto cellulose: Effects of pretreatments and crosslinking agent

The graft copolymerization of acrylic acid (AA) and 2‐acrylamido 2‐methylpropane sulfonic acid (AASO₃H) onto cellulose, in the presence or absence of crosslinking agent N,N′‐methylene bisacrylamide (NMBA), by using different concentrations of ceric ammonium nitrate (CAN) initiator in aqueous nitric acid solution at either 5 or 30°C was investigated. To investigate the effect of pretreatment of cellulose on the copolymerization, before some grafting reactions cellulose was pretreated with either 2 or 20 wt % NaOH solutions or heated in distilled water/aqueous nitric acid (2.5 × 10^?3 M) at 55°C. To determine how the excess of initiator affects the grafting and homopolymerization, separate reactions were carried out by removing the excess of ceric ions by filtration of the mixture of initiator solution and cellulose before the monomer addition. Extraction‐purified products were characterized by grafting percentage and equilibrium swelling capacity. Pretreatment of cellulose with NaOH solutions decreased the grafting percentage of copolymers. In the case of AA–AASO₃H mixtures, nonpretreated cellulose gave a higher grafting percentage than NaOH‐pretreated cellulose. Filtration also lowered the grafting of AA on the cellulose in the cases of pretreatment with either water or nitric acid. Copolymers with the highest grafting percentage (64.8%) and equilibrium swelling value (105 g H₂O/g copolymer) were obtained in grafting reactions carried out in the presence of NMBA at 5°C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2267–2272, 2001     

Development and material properties of poly(lactic acid)/poly(3‐hydroxybutyrate‐co−3‐hydroxyvalerate)‐based nanocrystalline cellulose nanocomposites

This study is focused on the development and analysis of the thermal and structural behavior of nanocrystalline cellulose (NCC)‐based bionanocomposites (BCs). Nanocrystalline cellulose was prepared by controlled acid hydrolysis of oil palm empty fruit bunch fibers. The resulting NCC was surface modified using TEMPO‐mediated oxidation and solvent exchange methods for surface functionalization and also to improve dispersion of fillers. Solvent exchange NCC reinforced polymer blend containing poly(lactic acid)/poly‐(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) was prepared by using solution casting technique at various NCC loading percentages. The addition of NCC resulted in the improvement of structural, thermal, and mechanical properties of BCs as compared to that of the polymer blend. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44328.     

Preparation,characterization, and antibacterial activities of quaternarized N‐halamine‐grafted cellulose fibers

A viable method for coating of cellulose fiber with quaternarized N‐halamine is reported in this article. The use of quaternary ammonium salt group in combination with N‐halamine group can reinforce the antibacterial activity. The chemical structure of as‐synthesized N‐halamine precursor 4‐(Bromo‐acetic acid methylester)‐4‐ethyl‐2‐ oxazolidinone (BEO) was characterized by ¹H‐NMR. The cellulose fibers were characterized by Fourier transform infrared spectra and X‐ray photoelectron spectra. The spectra data confirmed that the quaternarized N‐halamine‐grafted cellulose fibers were successfully obtained. The antibacterial properties of functional fibers were challenged with both Gram positive and Gram negative bacteria. The antibacterial tests and showed that the as‐prepared antibacterial cellulose fibers exhibited powerful and rapid bactericidal performance against both Gram negative E. coli and Gram positive S. aureus. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42702.     

Impact of lignin extraction methods on microstructure and mechanical properties of lignin‐based carbon fibers

In order to optimize the use of residues of enzymatic hydrolysis of corn stalk (REHCS) and explore the low‐cost and sustainable raw material substitute for carbon fibers, three types of lignin samples were extracted from REHCS by various extraction methods, and then they were converted into carbon fibers (CFs) by electrospinning, thermostabilization, and carbonization under the same process conditions. The microstructure and mechanical properties of the three types of carbonized fibers were different. The CFs from the ethanol organosolv lignin were actually smooth and brittle carbon films. The CFs from the formic acid/acetic acid organosolv lignin had microscopic pores, causing poor mechanical properties. Comparatively, the CFs from the alkaline lignin demonstrated preferable microstructure and mechanical properties. The reasons for the differences were analyzed by characterizing the lignin samples, precursor fibers, and resultant CFs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45580.     

A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment

Cellulose nanofibers (CNFs) were isolated from kenaf fibers and wheat straw by formic acid (FA)/acetic acid (AA), peroxyformic acid (PFA)/peroxyacetic acid (PAA), hydrogen peroxide (H₂O₂) treatment; and subsequently through ball milling treatment. Characterization of extracted cellulose and cellulose nanofibers was carried out through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). TEM images showed that extracted cellulose nanofibers had diameter in the range of 8–100 nm. FTIR and XRD results implied that hemicellulose and lignin were mostly removed from lignocellulosic biomass with an increase in crystallinity, and isolation of cellulose nanofibers was successful. The TGA results showed that decomposition temperature of cellulose nanofibers increased by about 27°C when compared with that of untreated lignocellulosic biomass. No significant change was observed in the decomposition temperature of bleached celluloses after ball milling. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42990.     

Gentamicin‐loaded poly(acrylic acid)‐grafted cotton fibers,part 1: Synthesis,characterization, and preliminary drug release study

This study describes preparation of poly (acrylic acid)‐grafted cotton fibers and release of antibiotic drug gentamicin sulfate from them under physiological conditions. Poly(acrylic acid) has been grafted onto cellulose backbone of cotton fibers via Ce(IV)‐initiated polymerization in aqueous medium. The conditions obtained for optimum grafting were as follows: initiation time 30 min; initiation temperature 37°C; monomer concentration 27.8 mM; grafting temperature 30°C; nitric acid (catalyst) concentration 0.1M. The grafted fibers were characterized by FTIR, TGA, and SEM analysis. The antibiotic drug gentamicin sulfate (GS) was loaded into the grafted fibers by equilibration method and release was studied under physiological conditions. The kinetic release data was interpreted by first‐order kinetic model. Finally, drug‐loaded fibers showed fair antibacterial action against Escherichia coli. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and properties of chemical cellulose from ascidian tunic and their regenerated cellulose fibers

Chemical cellulose (dissolving pulp) was prepared from ascidian tunic by modified paper‐pulp process (prehydrolysis with acidic aqueous solution of H₂SO₄, digestion with alkali aqueous solution of NaOH/Na₂S, bleaching with aqueous NaOCl solution, and washing with acetone/water). The α‐ cellulose content and the degree of polymerization (DPw) of the chemical cellulose was about 98 wt % and 918, respectively. The Japanese Industrial Standard (JIS) whiteness of the chemical cellulose was about 98%. From the X‐ray diffraction patterns and ¹³C‐NMR spectrum, it was found that the chemical cellulose obtained here has cellulose Iβ crystal structure. A new regenerated cellulose fiber was prepared from the chemical cellulose by dry–wet spinning using N‐methylmorpholine‐ N‐oxide (NMMO)/water (87/13 wt %) as solvent. The new regenerated cellulose fiber prepared in this study has a higher ratio of wet‐to‐dry strength (<0.97) than commercially regenerated cellulose fibers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1634–1643, 2002.     

Chiral separation of mandelic acid by temperature‐induced aqueous two‐phase system

BACKGROUND: R‐mandelic acid is an important chiral pharmaceutical intermediate, which is commonly obtained by biotransformation. This work has focused on using novel chiral recognition technology, aqueous two‐phase extraction, for the chiral separation of mandelic acid. RESULTS: The copper (II) formed a 2:1 complex with β‐CD in an alkaline solution, which was isolated from solution by the addition of ethanol. The complex structure was characterized by IR and UV spectroscopy. The chiral recognition system was established by adding Cu₂‐β‐CD into the triton‐114 aqueous two‐phase extraction system, which preferentially recognizes the (R)‐enantiomer rather than the (S)‐enantiomer. Factors affecting the extraction mechanism were analyzed, namely the concentration of Cu₂‐β‐CD and tritonX‐114, the types of salts, pH, and temperature. It was found that the concentration of Cu₂‐β‐CD and temperature were the most important influencing factors for chiral separation of mandedlic acid. The experimental results showed that the ee values increased with pH and concentration of trition‐114, and the maximum ee was 67.91%. The addition of inorganic salt had a strong influence on ee, which decreased when salt was added into the aqueous two‐phase extraction system. CONCLUSION: A novel chiral recognition technology ‐ aqueous two phase extraction is reported in this paper.The tritonX‐114 aqueous two phase system have a good recognition ability for mandelic acid. Copyright © 2012 Society of Chemical Industry     

High‐strength regenerated cellulose fibers spun from 1‐butyl‐3‐methylimidazolium chloride solutions

High‐performance regenerated cellulose fibers were prepared from cellulose/1‐butyl‐3‐methylimidazolium chloride (BMIMCl) solutions via dry‐jet wet spinning. The spinnability of the solution was initially evaluated using the maximum winding speed of the solution spinning line under various ambient temperatures and relative humidities in the air gap. The subsequent spinning trials were conducted under various air gap conditions in a water coagulation bath. It was found that low temperature and low relative humidity in the air gap were important to obtain fibers with high tensile strength at a high draw ratio. From a 10 wt % cellulose/BMIMCl solution, regenerated fibers with tensile strength up to 886 MPa were prepared below 22 °C and relative humidity of 50%. High strengthening was also strongly linked with the fixation effect on fibers during washing and drying processes. Furthermore, an effective attempt to prepare higher performance fibers was conducted from a higher polymer concentration solution using a high molecular weight dissolving pulp. Eventually, fibers with a tensile strength of ～1 GPa and Young's modulus over 35 GPa were prepared. These tensile properties were ranked at the highest level for regenerated cellulose fibers prepared by an ionic liquid–based process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45551.     

Synthesis and characterization of the new cellulose derivative films based on the hydroxyethyl cellulose prepared from esparto “stipa tenacissima” cellulose of Eastern Morocco. II. Esterification with acyl chlorides in a homogeneous medium

Esparto “Stipa tenacissima” cellulose esters derivatives: HECA‐COO? C₄H₈? COOC₂H₅, HECA‐COO? C₈H₁₆? COOC₂H₅, and HECA‐COO? C₆H₄? COOC₂H₅ were successfully prepared in Tetrahydrofuran (THF)/triethylamine system with a degree of substitution (DS), respectively, DS_AD‐Et=0.32, DS_SB‐Et=0.22, and DS_TRP‐Et=0.50 using hydroxyethyl cellulose acetate (HECA; DS_AC=0.50) as intermediate product, and we avoided the drawbacks of cellulose solubility. The structural modifications were investigated using Fourier transform infrared spectroscopy (FTIR), Proton nuclear magnetic resonance (¹H‐NMR), Carbon‐13 nuclear magnetic resonance (¹³C‐NMR), and Distortionless Enhancement by Polarization Transfer 135° (DEPT‐135). The results from these analyses revealed the presence of the characteristic groups indicating that the grafting reaction was successful. The crystallinity and the structure order changes during the esterification reactions were recorded by X‐ray diffraction (XRD), it is found that the crystallinity degree decrease from 63.1% for Esparto “Stipa tenacissima” cellulose to 27.74% for HECA. The thermal stability of the esterified and unmodified cellulose samples was studied by thermogravimetric analysis (TGA)‐differential thermal analysis (DTA); the modified HECA exhibits a decrease in thermal stability relatively to the unmodified HECA, and this may be related to the groups grafted. The resulted cellulose esters HECA‐P_x (x = 1, 2, or 3) were soluble in THF and present an amorphous structure justified by XRD spectra. It was noted by TGA‐DTA analysis that the cellulose esters with low melting range were proved as thermoplastic polymers. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of a vinyl monomer containing β‐cyclodextrin and grafting onto cotton fiber

To chemically bond β‐cyclodextrin (β‐CD), which can form inclusion complexes, acrylamidomethyl CD (CD–NMA) obtained from the acid‐catalyzed reaction of N‐methylolacrylamide (NMA) and β‐CD was grafted onto cellulose fibers using CeIV as the initiator. The double‐bond content of CD–NMA increased with increase in the NMA/CD mol ratio, and a CD–NMA containing a maximum of three molecules of NMA bonded to a CD molecule could be obtained. Since the grafting condition is acidic, the hydrolytic stability of CD–NMA in aqueous nitric acid was studied. The temperature of hydrolysis proved to have a greater effect on the depletion of double bonds from CD–NMA compared with the concentration of the acid. Thus, CD–NMA was grafted onto cellulose fibers at a low temperature, and FTIR analysis of the CD–NMA‐grafted cotton fibers confirmed the chemical bonding of CD–NMA molecules to cellulose. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 438–446, 2001     

High Stiffness Cellulose Fibers from Low Molecular Weight Microcrystalline Cellulose Solutions Using DMSO as Co‐Solvent with Ionic Liquid

There is a need to develop high‐performance cellulose fibers as sustainable replacements for glass fibers, and as alternative precursors for carbon filaments. Traditional fiber spinning uses toxic solvents, but in this study, by using dimethyl sulfoxide (DMSO) as a co‐solvent with an ionic liquid, a novel high‐performance fiber with exceptional mechanical properties is produced. This involves a one‐step dissolution, and cost‐effective route to convert high concentrations of low molecular weight microcrystalline cellulose into high stiffness cellulose fibers. As the cellulose concentration increases from 20.8 to 23.6 wt%, strong optically anisotropic patterns appear for cellulose solutions, and the clearing temperature (T _c) increases from ≈100 °C to above 105 °C. Highly aligned, stiff cellulose fibers are dry‐jet wet spun from 20.8 and 23.6 wt% cellulose/1‐ethyl‐3‐methylimidazolium diethyl phosphate/DMSO solutions, with a Young's modulus of up to ≈41 GPa. The significant alignment of cellulose chains along the fiber axis is confirmed by scanning electron microscopy, wide‐angle X‐ray diffraction, and powder X‐ray diffraction. This process presents a new route to convert high concentrations of low molecular weight cellulose into high stiffness fibers, while significantly reducing the processing time and cost.     

Some properties of bacterial cellulose produced by new native strain Gluconacetobacter sp. A06O2 obtained from Turkish vinegar

The aim of the study was to isolate and identify an acetic acid bacterial strain having high cellulose yield and to investigate some physicochemical properties of bacterial cellulose (BC). Acetic acid bacteria were isolated by using 62 samples (vinegar, fruit, vegetable, and soil) from different region of Turkey. The cellulose production ability of 153 isolates was determined. A strain (A06O2) having high and stable cellulose yield was identified by biochemical tests and 16S rRNA gene sequencing and compared with type strain Gluconacetobacter xylinus NRRL B‐759. Based on the results, strain A06O2 was named at the genus level as Gluconacetobacter, however, species level identification could not be made. Celluloses from both strains were purified to investigate the physicochemical properties such as thermal properties, solubility in various solvents, elemental composition, tensile properties, and surface properties by FTIR and SEM. The results showed that the cellulose samples of two bacterial strains differed in the physicochemical properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication of cellulose membrane with “imprinted morphology” and low crystallinity from spherulitic [Bmim]Cl

In the present study, regenerated cellulose membrane with “imprinted morphology” and low crystallinity was fabricated from the crystal cellulose/[Bmim]Cl solution. Spherulites of 1‐butyl‐3‐methilimidazolium chloride ([Bmim]Cl) and cellulose/[Bmim]Cl solution were observed using polarized optical microscopy under certain condition. The fabricated cellulose membranes presented some particular characteristics compared with the membrane prepared from traditional cellulose/[Bmim]Cl solution. All the fabricated membranes were characterized by optical microscope, Wide‐angle X‐ray diffraction (WAXD), thermo‐gravimetric analysis, and mechanical testing. The images showed that the resulting membranes prepared from crystal cellulose/[Bmim]Cl solution were “imprinted” with patterns which originated from the crystalline structure of [Bmim]Cl. The results of WAXD showed that the obtained cellulose membrane exhibited low diffraction peaks and crystallinity of approximately 24.57%. Furthermore, the low crystallinity led to the low mechanical property (27.5 MPa), thermal stability (315.4 °C), and high moisture regain (9.5%). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43798.     

Stipa tenacessima L cationized fibers as adsorbent of anionic dyes

The extraction of Stipa tenacessima L Alfa fibers was performed using alkaline procedure to remove noncellulosic substances such as pectin, lignin, and hemicellulose. The degree of polymerization of extracted and purified Alfa fibers was determined using viscosimetric method and extracted fibers were used as a cationic ion‐exchange material by treating alkali‐cellulose of Alfa with EpoxyPropylTriMethylAmmonium Chloride (EPTMAC). Evidence of grafting was monitored using IR spectroscopy and thermogravimetry analysis. Two EPTMAC‐Alfa fibers with different %N were prepared and tested as adsorbent of four acid dyes: Acid Blue 25 (AB 25), Acid Yellow 99 (AY 99), Reactive Yellow 23 (RY 23), and Acid Blue 74 (AB 74). The modeling of the adsorption isotherms using Langmuir, Freundlich, and Jossens allowed the determination of isotherm constants leading to characterize the different adsorbent/adsorbate systems prepared. Thermodynamic parameters such as change in free energy (ΔG), the enthalpy (ΔH), and the entropy (ΔS) were also evaluated. Additionally, regeneration of adsorbent solid supports by desorption process in fixed bed column was reported. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Acrylonitrile monomer grafting on gray cotton to impart high water absorbency

Acrylonitrile (AN) monomer was directly grafted onto gray cotton yarn using a KMnO₄—HNO₃ redox system by a chemical initiation technique. The major factors affecting polymerization of AN, such as KMnO₄, nitric acid, and AN concentration as well as the reaction time and temperature of the polymerization, were studied. The water absorbency of grafted fibers depends strongly on their posttreatment. Saponification of AN‐g‐cotton with a hot sodium hydroxide solution developed superabsorbency. Absorbency with distilled water and a saline solution (0.9% NaCl) was studied. Grafting cellulose with AN using a KMnO₄/nitric acid redox system proceeds by a free‐radical mechanism. Use of cotton in the gray form as a starting material rather than a bleached one helps in the better deposition of MnO₂ with subsequent acceleration of the grafting reaction, resulting in better whiteness of the grafted products. The enhancement in the whiteness index could be interpreted in terms of the oxidation of natural coloring matter, which happens to be the objective of the bleaching process. Grafting of AN onto gray cotton results in the elimination of several preparatory treatments including the conventional bleaching operation, ultimately reducing the water consumption as well as minimizing the unwanted effluent generation. The work has the potential of promoting cost‐effective and environmental friendly technologies and techniques. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 887–894, 1999