Synthesis and characterization of biodegradable poly(ester‐urethanes) based on bacterial poly(R‐3‐hydroxybutyrate)

A series of poly(R‐3‐hydroxybutyrate)/poly(ε‐caprolactone)/1,6‐hexamethylene diisocyanate‐segmented poly(ester‐urethanes), having different compositions and different block lengths, were synthesized by one‐step solution polymerization. The molecular weight of poly(R‐3‐hydroxybutyrate)‐diol, PHB‐diol, hard segments was in the range of 2100–4400 and poly(ε‐caprolactone)‐diol, PCL‐diol, soft segments in the range of 1080–5800. The materials obtained were investigated by using differential scanning calorimetry, wide angle X‐ray diffraction and mechanical measurements. All poly(ester‐urethanes) investigated were semicrystalline with T_m varying within 126–148°C. DSC results showed that T_g are shifted to higher temperature with increasing content of PHB hard segments and decreasing molecular weight of PCL soft segments. This indicates partial compatibility of the two phases. In poly(ester‐urethanes) made from PCL soft segments of molecular weight (M_n ≥ 2200), a PCL crystalline phase, in addition to the PHB crystalline phase, was observed. As for the mechanical tensile properties of poly(ester‐urethane) cast films, it was found that the ultimate strength and the elongation at the breakpoint decrease with increasing PHB hard segment content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 703–718, 2002     

Controllable synthesis of a novel poly(vinyl alcohol)‐based hydrogel containing lactate and PEG moieties

Tunable hydrogel that contained well‐defined poly(vinyl alcohol) (PVA), labile lactate groups, and hydrophilic poly(ethylene glycol) (PEG) segments was prepared through a combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and esterification reaction. A diol was prepared via the esterification between lactic acid (LA) and PEG. Then the diol was allowed to react with maleic anhydride to produce a diacid. Meanwhile, well‐defined PVA was synthesized by the alcoholysis of poly(vinyl acetate) (PVAc) obtained by RAFT polymerization of vinyl acetate. The hydrogels with tailor‐made structure were generated by crosslinking PVA with LA‐based diacid. The structures and properties of LA‐based intermediates and the hydrogels were characterized with Fourier transform infrared spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. Both LA‐based diol and diacid were semicrystalline and water‐soluble, their melting temperature and glass transition temperature were 52 and ?51, 54 and ?41°C, respectively. The polydispersity indexes of the precursor of PVA samples were within the range of 1.03–1.10. It was found that the thermal stability of hydrogel was higher than that of LA‐based diacid. Both the swelling and release properties of the hydrogels depend on the feeding ratio of PVA/LEM and the chain length of PVA, which reflected that the structure and properties of the hydrogels were controllable. POLYM. ENG. SCI., 54:1366–1371, 2014. © 2013 Society of Plastics Engineers     

Synthesis and chain extension of hydroxyl‐terminated poly(lactic acid) oligomers and application in the blends

Hydroxyl‐terminated poly(lactic acid) prepolymer (LA prepolymer) were prepared via L ‐lactic acid as monomer, 1,4‐butanediol as blocking agent and Sn(II) octoate as catalyst by direct melt polymerization. Then the LA prepolymer was blended with starch followed by in situ chain extending reaction using different content of TDI as chain extender, producing the high molecular weight of poly(ester urethane) in the blends. The LA prepolymer/starch‐TDI blends were characterized by GPC, ¹H‐NMR, SEM, DSC, tensile strength testing, and water resistance. The SEM results of cross‐section show that, compared with the simple PLA/starch blends, almost the starch granules were completely covered by ploy(ester urethane) in the LA prepolymer/starch‐TDI blends system. In comparison to the simple PLA/starch blends, the mechanical properties of LA prepolymer/starch‐TDI blends were increased, such as tensile strength increasing from 18.6 ± 3.8 to 44.2 ± 6.2 Mpa, tensile modulus increasing from 510 ± 62 to 1,850 ± 125 Mpa and elongation at break increasing from 1.8 ± 0.4 to 4.0 ± 0.5 %, respectively. This is attributed to high weight of poly (ester urethane) was formed via in situ reaction of the end of hydroxyl (LA prepolymer) and isocyanate groups and the starch granules were easily covered by ploy(ether urethane) via in situ polymerization in the blends. Moreover, covalent linkage was formed between the two phases interfaces. As a result, the interfacial adhesion was enhance and improved the mechanical property. In addition, the water resistance of LA prepolymer/starch‐TDI blends was much better that of the simple PLA/starch blends. POLYM. COMPOS., 2013 © 2013 Society of Plastics Engineers     

The effect of the soft segment of prepolymers on properties of poly(urethane‐ester) and its biodegradability

The influence of soft‐segment prepolymers prepared through the polymerization of δ‐valerolactone (VL) and 2,2‐dimethyl‐1,3‐propandiol (DP) monomers on the structure and properties of poly(urethane‐ester) as well as its biodegradability were investigated. Poly(urethane‐ester) was prepared in two steps. The first step was the preparation of prepolymers with various chain lengths by polymerizing VL and DP monomers in the presence of a distannoxane catalyst at 100 °C under nitrogen atmosphere. The second step was the preparation of poly(urethane‐ester) by polymerizing 4,4′‐methylene‐bis(phenyl isocyanate) (MDI) and prepolymers with various chain lengths in the absence of catalysts. The poly(urethane‐ester) was characterized through an analysis of functional groups (FTIR), thermal properties (differential thermal analysis/TGA), mechanical properties (tensile tester), crystallinity (XRD) and biodegradability. An increased chain length of the prepolymer used in polymerization with MDI leads to an increase in the thermal properties and crystallinity of poly(urethane‐ester). However, the maximum biodegradability in the activated sludge was observed in the poly(urethane‐ester) prepared by polymerizing MDI and prepolymers with a molar VL/DP ratio of 20/1. The amorphous parts of polymers were more easily decomposed by microorganism enzymes than were the crystalline parts after an incubation period of 30 days. Copyright © 2011 Society of Chemical Industry     

Studies on thermoplastic polyurethanes based on new diphenylethane‐derivative diols. III. The effect of molecular weight and structure of soft segment on some properties of segmented polyurethanes

Two series of poly(ether urethane)s and one series of poly(ester urethane)s were synthesized, containing, respectively, poly(oxytetramethylene) diol (PTMO) of M _n = 1000 and 2000 and poly(ε‐caprolactone) diol of M _n = 2000 as soft segments. In each series the same hard segment, i.e., 4,4′‐(ethane‐1,2‐diyl)bis(benzenethiohexanol)/hexane‐1,6‐diyl diisocyanate, with different content (～ 14–72 wt %) was used. The polymers were prepared by a one‐step melt polymerization in the presence of dibutyltin dilaurate as a catalyst, at the molar ratio of NCO/OH = 1 (in the case of the polymers from PTMO of M _n = 1000 also at 1.05). For all polymers structures (by FTIR and X‐ray diffraction analysis) and physicochemical, thermal (by differential scanning calorimetry and thermogravimetric analysis), and tensile properties as well as Shore A/D hardness were determined. The resulting polymers were thermoplastic materials with partially crystalline structures (except the polymer with the highest content of PTMO of M _n = 2000). It was found that the poly(ether urethane)s showed lower crystallinity, glass‐transition temperature (T_g), and hardness as well as better thermal stability than the poly(ester urethane)s. Poly(ether urethane)s also exhibited higher tensile strength (up to 23.5 MPa vs. 20.3 MPa) and elongation at break (up to ～ 1950% vs. 1200%) in comparison with the corresponding poly(ester urethane)s. Among the poly(ether urethane)s an increase in soft‐segment length was accompanied by an increase in thermal stability, tensile strength, and elongation at break, as well as a decrease in T_g, crystallinity, and hardness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(ester‐urethane)s synthesized using polyoxalate diols

Amorphous poly(ester‐urethane)s (PEUs) were synthesized by reacting polyoxalate diols (PODs), which are oligoester diols prepared from condensation polymerization of dimethyl oxalate (DMO) and alkane diols, with 4, 4′‐diphenylmethane diisocyanate (MDI) and propylene diamine (PDA), a chain extender. Their structure–property relationships were studied, mainly focused on effects of molecular weight and alkylene chain length of the POD. The synthesized PEUs were buried in compost soil at 30°C and incubated to conveniently evaluate their biodegradability. Their hydrolytic characteristics were also examined, and what made poly(oxalate‐urethane) (POU) biodegradable was discussed. Poly(oxalate carbonate‐urethane) (POCU), which can be produced adding a polycarbonate diol (PCD) into the POD and then copolymerizing them with DMO, provided biodegradable polyurethanes with mechanical properties appropriate for practical uses. In addition, the microstructure of these copolyurethanes was characterized. POLYM. ENG. SCI., 45:163–173, 2005. © 2005 Society of Plastics Engineers.     

Novel amphiphilic poly(ester‐urethane)s based on poly[(R)‐3‐hydroxyalkanoate]: synthesis,biocompatibility and aggregation in aqueous solution

BACKGROUND: The aim of this work was to develop polyhydroxyalkanoates (PHAs) for blood contact applications, and to study their self‐assembly behavior in aqueous solution when the PHAs are incorporated with hydrophilic segments. To do this, poly(ester‐urethane) (PU) multiblock copolymers were prepared from hydroxyl‐terminated poly(ethylene glycol) (PEG) and hydroxylated poly[(R)‐3‐hydroxyalkanoate] (PHA‐diol) using 1,6‐hexamethylene diisocyanate as a coupling reagent. The PEG segment functions as a soft, hydrophilic and crystalline portion and the poly[(R)‐3‐hydroxybutyrate] segment behaves as a hard, hydrophobic and crystalline portion. In another series of PU multiblock copolymers, crystalline PEG and completely amorphous poly[((R)‐3‐hydroxybutyrate)‐co‐(4‐hydroxybutyrate)] behaved as hydrophobic and hydrophilic segments, respectively. RESULTS: The formation of a PU series of block copolymers was confirmed by NMR, gel permeation chromatography and infrared analyses. The thermal properties showed enhanced thermal stability with semi‐crystalline morphology via incorporation of PEG. Interestingly, the changes of the hydrophilic/hydrophobic ratio led to different formations in oil‐in‐water emulsion and surface patterning behavior when cast into films. Blood compatibility was also increased with increasing PEG content compared with PHA‐only polymers. CONCLUSION: For the first time, PHA‐based PU block copolymers have been investigated in terms of their blood compatibility and aggregation behavior in aqueous solution. Novel amphiphilic materials with good biocompatibility for possible blood contact applications with hydrogel properties were obtained. Copyright © 2008 Society of Chemical Industry     

Carbohydrate‐based poly(ester‐urethane)s: A comparative study regarding cyclic alditols extenders and polymerization procedures

A set of segmented poly(ester‐urethane)s were prepared from diisocyanates HDI or MDI and using 1,4‐butanediol and D ‐glucose‐derived cyclic diols (1,4 : 3,6‐dianhydro‐D ‐glucitol (isosorbide) or 2,4;3,5‐di‐O‐methylidene‐D ‐glucitol (gludioxol) or mixtures of them) as extenders. Hydroxyl end‐capped polycaprolactone with a molecular weight of 3000 g·mol^?1 was used as soft segment. Two polymerization methods, in solution and in bulk, were applied for the synthesis of these poly(ester‐urethane)s. The influence of the preparation procedure and composition in cyclic extender on synthesis results, structure, and properties of the novel poly(ester‐urethane)s was comparatively evaluated and discussed. The effect of replacement of 1,4‐butanediol by isosorbide or gludioxol on hydrodegradability was also assessed; the hydrolysis rate increased noticeably with the presence of glucitol derived units, although degradation of the polymers took place essentially by hydrolysis of the polyester soft segment. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of polylactide‐block‐poly(butylene adipate) polyurethane thermoplastic elastomer

Polylactide‐block‐poly(butylene adipate) poly(ester‐urethane) (PLAEU) thermoplastic elastomer was obtained by melt chain extending reaction with polylactide‐block‐poly(butylene adipate)‐block‐polylactide (PBLA) and hexamethylene diisocyanate (HDI). PBLA was previously prepared with L ‐lactide and poly(butylene adipate) diol (PBA diol). Experimental parameters including feed ratio, polymerization temperature, and time were optimized. The weight average molecular weight (M_w) of PLAEU surpassed 10⁵ g/mol. In contrast to corresponding PBLA, the crystallinity and melt temperature (T_m) of PLAEU decreased, whereas its glass transition (T_g) shifted to high temperature due to the “pseudoextension” structure of polylactide (PLA) block. Additionally, the crystallinity and T_m of PLAEU were subject to crystallization method and molecular weight. The tensile strength of PLAEU varied from 6.61 to 24.41 MPa and elongation from 190% to 780%. Therefore, the mechanical properties of PLAEU can be regulated by altering the length ratio of PLA to PBA block. The high elasticity of PLAEU can be explained with phase separation mechanism. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Synthesis and characterization of biodegradable block copolymers of poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol)

The synthesis of two low molecular weight linear unsaturated oligoester precursors, poly(propylene fumarate‐co‐sebacate) (PPFS) and poly(ethylene fumarate‐co‐sebacate) (PEFS), are described. PPFS, PEFS, and poly(ethylene glycol) are then used to prepare poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PPFS‐co‐PEG) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PEFS‐co‐PEG) block copolymers. The products thus obtained are investigated in terms of the molecular weight, composition, structure, thermal properties, and solubility behavior. A number of design parameters including the molecular weights of PPFS, PEFS, and PEG, the reaction time in the polymer synthesis, and the weight ratio of PEG to PPFS or to PEFS are varied to assess their effects on the product yield and properties. The hydrolytic degradation of PPFS‐co‐PEG and PEFS‐co‐PEG in an isotonic buffer (pH 7.4, 37°C) is investigated, and it is found that the fumarate ester bond cleaves faster than does the sebacate ester bond. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 295–300, 2004     

Synthesis and characterization of poly(carbonate urethane) networks with shape‐memory properties

In this study, a series of shape‐memory polyurethanes were prepared from polycarbonate diol (PCDL) with a molecular weight of 2000, trimethylol propane, and isophorone diisocyanate (IPDI). The properties of crosslinked poly(carbonate urethane) (PCU) networks with various compositions were investigated. The chemical structures and thermal properties were determined with Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. FTIR analysis indicated that PCU had the structures of IPDI and PCDL and the amido formyl ester in polyurethanes. The gel content of PCU showed that PCU could be effectively formed as crosslinked polyurethane networks. The glass‐transition temperatures of the PCU networks increased slightly with decreasing soft‐segment content in the networks. The values of Young's modulus in the networks at 25°C increased with decreasing soft‐segment content, whereas the tensile stress and breaking elongation decreased significantly. PCU showed shape‐memory effects with a high strain fixity rate. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Maximizing the utility of bio-based diisocyanate and chain extenders in crystalline segmented thermoplastic polyester urethanes: Effect of polymerization protocol

High molecular weight semi crystalline thermoplastic poly(ester urethanes), TPEUs, were prepared from a vegetable oil-based diisocyanate, aliphatic diol chain extenders and poly(ethylene adipate) macro diol using one-shot, pre-polymer and multi-stage polyaddition methods. The optimized polymerization reaction achieved ultra-high molecular weight TPEUs (>2 million as determined by GPC) in a short time, indicating a very high HPMDI – diol reactivity. TPEUs with very well controlled hard segment (HS) and soft segment (SS) blocks were prepared and characterized with DSC, TGA, tensile analysis, and WAXD in order to reveal structure–property relationships. A confinement effect that imparts elastomeric properties to otherwise thermoplastic TPEUs was revealed. The confinement extent was found to vary predictably with structure indicating that one can custom engineer tougher polyurethane elastomers by “tuning” soft segment crystallinity with suitable HS block structure. Generally, the HPMDI-based TPEUs exhibited thermal stability and mechanical properties comparable to entirely petroleum-based TPEUs.     

New thermoplastic segmented polyurethanes with hard segments derived from 4,4′‐diphenylmethane diisocyanate and methylenebis(1,4‐phenylenemethylenethio)dialcanols

New thermoplastic poly(ether–urethane)s and poly(carbonate–urethane)s were synthesized by a one‐step melt polymerization from poly(oxytetramethylene) diol (PTMO) and poly(hexane‐1,6‐diyl carbonate) diol (PHCD) as soft segments, 4,4′‐diphenylmethane diisocyanate, and 2,2′‐[methylenebis(1,4‐phenylenemethylenethio)]diethanol, 3,3′‐[methylenebis(1,4‐phenylenemethylenethio)]dipropan‐1‐ol or 6,6′‐[methylenebis(1,4‐phenylenemethylenethio)]dihexan‐1‐ol as unconventional chain extenders. The effects of the kind and amount of the polymer diol and chain extender used on the structure and properties of the polymers were studied. The polymers were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction analysis, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), TGA coupled with FTIR spectroscopy, and Shore hardness and tensile testing. The obtained high‐molecular‐weight polymers showed elastomeric or plastic properties. Generally, the PTMO‐based polymers exhibited significantly lower glass‐transition temperatures (up to ?48.1 vs ?1.4°C), a higher degree of microphase separation, and ordering in hard‐segment domains in comparison with the corresponding PHCD‐based ones. Moreover, it was observed that the polymers with the PTMO soft segments showed poorer tensile strengths (up to 36.5 vs 59.6 MPa) but higher elongations at break. All of the polymers exhibited a relatively good thermal stability. Their temperatures of 1% mass loss were in the range 270–320°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of new functional poly(urethane‐imide) crosslinked networks

To synthesize new functional poly(urethane‐imide) crosslinked networks, soluble polyimide from 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride, 4,4′‐oxydianiline, and maleic anhydride and polyurethane prepolymer from polycaprolactone diol, tolylene 2,4‐diisocyanate and hydroxyl ethyl acrylate were prepared. Poly(urethane‐imide) thin films were finally prepared by the reaction between maleimide end‐capped soluble polyimide (PI) and acrylate end‐capped polyurethane (PU). The effect of polyurethane content on dielectric constant, residual stress, morphology, thermal property, and mechanical property was studied by FTIR, prism coupler, Thin Film Stress Analyzer (TFSA), XRD, TGA, DMTA, and Nano‐indentation. Dielectric constant of poly(urethane‐imide) thin films (2.39–2.45) was lower than that of pure polyimide (2.46). Especially, poly(urethane‐imide) thin films with 50% of PU showed lower dielectric constant than other poly(urethane‐imide) thin films did. Lower residual stress and slope in cooling curve were achieved in higher PU content. Compared to typical polyurethane, poly(urethane‐imide) thin films exhibited better thermal stability due to the presence of the imide groups. The glass transition temperature, modulus, and hardness decreased with increase in the flexible PU content even though elongation and thermal expansion coefficient increased. Finally, poly(urethane‐imide) thin films with low residual stress and dielectric constant, which are strongly affected by the morphological structure, chain mobility, and modulus, can be suggested to apply for electronic devices by variation of PU. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 113–123, 2006     

Hydrolytic resistance of model poly(ether urethane ureas) and poly(ester urethane ureas)

Poly(ester urethane ureas) (PesURUs) and poly(ether urethane ureas) (PetURUs) synthesized from diphenylmethane-4,4′-diisocyanate and poly(butylene adipate) diol, and poly(tetramethylene oxide) diol or poly(propylene oxide) diol, respectively, were hydrolyzed at 70°C for various periods up to 16 weeks. Differences in thermal and mechanical properties of as-received dry samples are correlated with the number and strength of hydrogen bonds formed between urea/urethane groups of hard segments and polyester or polyether groups of soft segments. Gel permeation chromatography measurements show that the molar mass of linear PesURUs markedly decreases with the hydrolysis time, whereas that of linear PetURUs remains almost unaffected. PesURU crosslinked by polymeric isocyanate has lower crystallinity, but shows somewhat better resistance to hydrolysis than its linear counterpart because of its more stable three-dimensional molecular structure. Water uptake at 37°C, dynamic mechanical thermal analysis, and differential scanning calorimetry thermograms determined for redried hydrolyzed specimens concurrently show that advancing hydrolysis accounts for decrease in the crystallinity (if any) of soft polyester segments, in the efficacy of hydrogen bonding and in crosslinking density. Experimental data indicate that hydrolytic resistance of PetURUs is primarily determined by (1) the hydrolytic stability of individual types of present groups, (2) steric hindrances affecting the access of water molecules to these groups, and (3) the hydrophilicity of backbones. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 577–586, 1998     

Preparation of UV-curable PEG-modified urethane acrylate emulsions and their coating properties. II. Effect of chain length of polyoxyethylene

To prepare self-emulsifiable urethane acrylate, poly(ethylene glycol)-modified urethane acrylates (PMUA), containing polyoxyethylene chains as a terminal group were synthesized by the reaction of a residual isocyanate group with poly(ethylene glycol) (PEG). Five types of PMUA were synthesized using five types of PEG having different molecular weight. As the chain length of polyoxyethylene of PMUA increased, the thermal stability of their emulsions improved and the tensile strength of their UV-cured films were also increased. For PMUA600 prepared using PEG600, the thermal stability of the emulsion and tensile strength of UV-cured film were relatively low. However, the emulsions of PMUAs which were synthesized using PEG2000, PEG4000, and PEG6000 were stable with increasing temperature and the tensile strength of their cured films was greater than that of PMUA 600. When PMUA600 was mixed with PMUA2000, PMUA4000, and PMUA6000, the thermal stability of the emulsions of mechanical properties of their UV-cured films were improved greatly. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2657–2664, 1997     

Structure‐property relationship of L‐tyrosine‐based polyurethanes for biomaterial applications

The structure‐property relationship of L ‐tyrosine‐based polyurethanes was demonstrated by using different polyols and diisocyanates. L ‐tyrosine‐based chain extender, desaminotyrosyl tyrosine hexyl ester (DTH), was used to synthesize a series of polyurethanes. Polyethylene glycol (PEG) or poly caprolactone diol (PCL) was used as the soft segment and hexamethylene diisocyanate (HDI) or dicyclohexylmethane 4,4′‐diisocyanate (HMDI) was used with DTH as the hard segment. The polyurethanes were characterized to investigate the effect of structure on different polyurethane properties. From FTIR and DSC, these polyurethanes exhibit a wide range of morphology from phase‐mixed to phase‐separated structure. The decreasing molecular weight of the PEG soft segment leads to relatively more phase mixed morphology whereas for PCL‐based polyurethanes the extent of phase mixing is less with decreasing PCL molecular weight. Results show that PCL‐based polyurethanes are mechanically stronger than PEG‐based polyurethanes but PCL‐based polyurethanes degrade slower and absorb less water compared with PEG‐based polyurethanes. The HMDI‐based polyurethanes are less crystalline and comparatively more hydrophobic than HDI‐based polyurethanes. The characterization results show that the polyurethane properties are directly related to the structure and can be varied easily for a different set of properties that are pertinent for biomaterial applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(ether urethane) flexible cyanate ester resins: Synthesis,characterization, and performance in commercial epoxy and polyurethane applications

A poly(ether urethane)‐based cyanate ester resin (PEUCER) with a biphenyl polyether backbone obtained from polymeric 4,4′‐diphenylmethanediisocyanate, bisphenol A, polyether polyols of three different molecular weights, and cyanogen bromide was synthesized to obtain a polymer with better functional and physical properties, such as adhesion, flexibility, and thermal stability. The synthesis of the poly(ether urethane)‐based 4,4′‐(oxybiphenyl propane) cyanate ester involved three steps: the formation of the poly(ether urethane) NCO‐terminated prepolymer, the formation of the OH‐terminated poly (ether urethane) prepolymer (PEU–PP), and the esterification reaction of cyanate to produce PEUCER. PEUCER was cyclotrimerized to yield a triazine‐ring‐containing polymer, which possessed better adhesion at high temperatures and better impact resistance. PEU–PP and PEUCER were characterized with wet chemical analysis, spectral methods, and thermal methods. PEUCER showed better performance with respect to thermal and adhesion properties with a single‐part polyurethane lamination adhesive and also showed better performance as a toughening agent in a two‐part epoxy laminate system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

端羟基聚乳酸的扩链改性研究

乳酸与2,2-(1,3-亚苯基)-二恶唑啉(1,3-PBO)直接熔融缩聚成端羟基乳酸预聚物(PLBO),以聚乙二醇(PEG)和六亚甲基二异氰酸酯(HDI)聚合制得的端异氰酸酯基聚乙二醇(PEG-NCO)为扩链剂,以二月桂酸二丁基锡为催化剂,对PLBO进行扩链以制备可完全生物降解的聚酯氨酯(PEU)。采用乌氏黏度法、FTIR、DSC、XRD、TG、SEM等方法对各聚合物的结构和性能进行了表征。结果表明:以n(—OH)/n(—NCO)=1的比例投料、反应温度165℃、反应压力0.096 MPa、反应时间20 min为PLBO扩链反应的最佳条件;PEU的最大黏均分子量为44 700;PEG的引入使得PEU的玻璃化转变温度均小于PLA与PLBO,且柔韧性提高;PEU热稳定性提高,分解过程分为两步,第一步为PEU链段中的PLA失重,第二步为PEG-NCO链段的降解;PEU的结晶度降低,进一步说明扩链后聚合物的柔韧性增强。     

Properties and phase segregation of crosslinked PCL‐based polyurethanes

Polyurethane (PU) films were prepared from different types of poly(ε‐caprolactone) glycols and hexamethylene diisocyanate without using any other ingredients such as solvent, catalyst, or chain extender. Polymers were stabilized by crosslinking formed as allophanate and/or biuret linkages during the curing process. The effects of different components on the product properties such as chemical structure, microphase segregation, mechanical strength, thermo‐mechanical, thermal properties, and surface hydrophilicities were investigated by FTIR‐ATR, atomic force microscope, mechanical tester, dynamic mechanical analyses, thermogravimetric analyzer, differential scanning calorimetry, and contact angle measurements. Phase separation of hard and soft segments significantly varied depending on the type and molecular weight of diol and triol. Films containing urethane‐urea bonds displayed the maximum phase separation and the highest mechanical strength. Polyols having higher molecular weight increased hydrophilicity while urea bonds caused a reverse effect resulted by bidentate hydrogen bonds. Results showed PUs with various properties can be synthesized via environmentally friendly process without using any solvent or catalyst. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39758.