Effect of drug loading on the properties of temperature‐responsive polyester–poly(ethylene glycol)–polyester hydrogels

Hydrogels that can undergo gelation upon injection in vivo are promising systems for the site‐specific delivery of drugs. In particular, some thermo‐responsive gels require no chemical additives but simply gel in response to a change from a lower temperature to physiological temperature (37 °C). The gelation mechanism does not involve covalent bonds, and it is possible that incorporation of drugs into the hydrogel could disrupt gelation. We investigated the incorporation of drugs into thermo‐responsive hydrogels based on poly(?‐caprolactone‐co‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(?‐caprolactone‐co‐lactide) (PCLA–PEG–PCLA). Significant differences in properties and in the response to incorporation of the anti‐inflammatory drug celecoxib (CXB) were observed as the PEG block length was varied from 1500 to 3000 g mol^?1. Linear viscoelastic moduli of a PCLA–PEG–PCLA hydrogel containing a 2000 g mol^?1 PEG block were least affected by the incorporation of CXB and this gel also exhibited the slowest release of CXB, so the incorporation of phenylbutazone, methotrexate, ibuprofen, diclofenac and etodolac was also investigated for this hydrogel. Different drugs resulted in varying degrees of syneresis of the hydrogels, suggesting that they interact with the polymer networks in different ways. In addition, the drugs had varying effects on the viscoelastic and compressive moduli of the gels. The results showed that the effects of drug loading on the properties of thermo‐responsive hydrogels can be substantial and depend on the drug. For applications such as intra‐articular drug delivery, in which the mechanical properties of the hydrogel are important, these effects should thus be studied on a case‐by‐case basis. © 2019 Society of Chemical Industry     

Novel polyurethane‐based thermosensitive hydrogels as drug release and tissue engineering platforms: design and in vitro characterization

Poloxamer P407 (P407) is a Food and Drug Administration approved triblock copolymer; its hydrogels show fast dissolution in aqueous environment and weak mechanical strength, limiting their in vivo application. In this work, an amphiphilic poly(ether urethane) (NHP407) was synthesized from P407, an aliphatic diisocyanate (1,6‐hexanediisocyanate) and an amino acid derived diol (N‐Boc serinol). NHP407 solutions in water‐based media were able to form biocompatible injectable thermosensitive hydrogels with a lower critical gelation temperature behavior, having lower critical gelation concentration (6% w/v versus 18% w/v), superior gel strength (G′ at 37 °C about 40 000 Pa versus 10 000 Pa), faster gelation kinetics (<5 min versus 15–30 min) and higher stability in physiological conditions (28 days versus 5 days) compared to P407 hydrogels. Gel strength and PBS absorption at 37 °C increased whereas dissolution rate (in phosphate‐buffered saline (PBS) at 37 °C) and permeability to nutrients (studied using fluorescein isothiocyanate–dextran model molecule) decreased as a function of NHP407 hydrogel concentration from 10% to 20% w/v. By varying the concentration, NHP407 hydrogels were thus prepared with different properties which could suit specific applications, such as in situ drug/cell delivery or bioprinting of scaffolds. Moreover, deprotected amino groups in NHP407 could be exploited for the grafting of bioactive molecules obtaining biomimetic hydrogels. © 2016 Society of Chemical Industry     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

pH‐sensitive swelling and release behaviors of anionic hydrogels for intelligent drug delivery system

The pH‐sensitive swelling and release behaviors of the anionic P(MAA‐co‐EGMA) hydrogels were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. There was a drastic change of the equilibrium weight swelling ratio of P(MAA‐co‐EGMA) hydrogels at a pH of around 5, which is the pK_a of poly (methacrylic acid) (PMAA). At a pH below 5, the hydrogels were in a relatively collapsed state but at a pH higher than 5, the hydrogels swelled to a high degree. When the molecular weight of the pendent poly(ethylene glycol) (PEG) of the P(MAA‐co‐EGMA) increased, the swelling ratio decreased at a pH higher than 5. The pK_a values of the P(MAA‐co‐EGMA) hydrogels moved to a higher pH range as the pendent PEG molecular weight increased. When the feed concentration of the crosslinker of the hydrogel increased the swelling ratio of the P(MAA‐co‐EGMA) hydrogels decreased at a pH higher than 5. In release experiments using Rhodamine B (Rh‐B) as a model solute, the P(MAA‐co‐EGMA) hydrogels showed a pH‐sensitive release behavior. At low pH (pH 4.0) a small amount of Rh‐B was released while at high pH (pH 6.0) a relatively large amount of Rh‐B was released from the hydrogels. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Self‐Healing,Injectable Gelatin Hydrogels Cross‐Linked by Dynamic Schiff Base Linkages Support Cell Adhesion and Sustained Release of Antibacterial Drugs

A new class of dynamic hydrogels made through Schiff base bonds based on gelatin (type A and B) and polyethylene glycol dibenzaldehyde (diBA‐PEG, 2000 and 4000 g mol^?1) is developed. Hydrogels form in situ by mixing aqueous solutions of gelatin and diBA‐PEG at a carefully adjusted pH. Compression test shows that the samples based on gelatin A are able to withstand at least ten cyclic loading/unloading without crack formation and significant permanent deformation. Self‐healing behavior of the hydrogel is proved by rheological measurements and also visual method. This hydrogel is proven to be injectable and nontoxic. Performance of the hydrogel in loading and delivery of clindamycin hydrochloride, as an antibacterial model drug, is evaluated against Staphylococcus aureus via antibacterial activity test. In vitro release of clindamycin hydrochloride is studied through an innovative method and it becomes clear that the release of clindamycin hydrochloride from this hydrogel follows a zero‐order kinetics.     

Thermoreversible hydrogel. XVII. Investigation of the drug release behavior for [N‐isopropylacrylamide‐co‐trimethyl acrylamidopropyl ammonium iodide‐co‐3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate] copolymeric hydrogels

A series of copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm), trimethyl acrylamidopropyl ammonium iodide (TMAAI), and 3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate (DMAPS). Results showed that the swelling ratios of these copolymeric hydrogels increased with an increase of TMAAI content. The drug release behavior of the ionic thermosensitive hydrogels related to their ionicity and drug types. Results indicated that the release ratio of caffeine in the hydrogels was not affected by the ionicity of hydrogels, but increased with increasing of the swelling ratio. The anionic solute (phenol red) strongly interacted with cationic hydrogel (very large K_d), so the phenol red release ratio in cationic gels was very low. On the other hand, CV was adsorbed only on the skin layer of the cationic hydrogel because of the charge repulsion, and released rapidly. Therefore the release ratio was highest for cationic hydrogel to cationic drug. In addition, the partition coefficients (K_d) and the drug delivery behavior of the present gels were also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1592–1598, 2002     

Effect of poly(ethylene glycol)-derived crosslinkers on the properties of thermosensitive hydrogels

Three crosslinkers, poly(ethylene glycol) diacrylate (PEGDA), glycerol ethoxylate triacrylate (GETA) and citric acid-(PEG acrylate)₃ (CA-PEGTA) derived from poly(ethylene glycol) (PEG) were synthesized at first. The three series of poly (N-isopropylacrylamide) (PNIPAAm) hydrogels were prepared by photopolymerization with the crosslinkers and compared with a hydrogel based on commercial crosslinker, N,N′-methylene bis-acrylamide (NMBA). The influence of the crosslinker structures and contents on the swelling behaviour, mechanical properties, and drug release of the hydrogels was investigated. The results showed that the hydrogels based on PEGDA and NMBA exhibited the highest and the lowest swelling ratio, respectively. The content of crosslinker of all hydrogel series showed good thermosensitivity and thermo-reversibility. The critical gel transition temperature (CGTT) appeared at 32 °C for the hydrogel based on NMBA, but appeared at about 34 °C for other hydrogels due to higher hydrophilicity of the crosslinker. In the mechanical properties, three-arms crosslinker GETA and CA-PEGTA led to higher mechanical strength than a linear crosslinker PEGDA. A hydrogel based on GETA (NG6) showed the highest shear modulus of 656.9 kPa and Young’s modulus of 1655.0 kPa. The hydrogels containing higher content of crosslinker revealed lower swelling ratio and higher mechanical strength. In the drug release, the hydrogels with higher swelling ratios showed higher drug absorbed. The highest release percentage of caffeine and vitamin B12 for hydrogel based on PEGDA (NP6) could reach 68.3% and 75.4%, respectively. In addition, the bound water and toxicity of the hydrogels were also investigated.

     

An autonomous self‐healing hydrogel based on surfactant‐free hydrophobic association

Self‐healing hydrogels are attractive for a variety of applications including wound dressings and coatings. This paper describes the facile preparation and characterization of an autonomous self‐healing hydrogel system comprising surfactant‐free hydrophobic associations. The hydrogel comprised a copolymer of benzyl methacrylate (B), octadecyl methacrylate (O), and methacrylic acid (MA). The hydrogels were prepared via a controlled dehydration procedure to achieve the formation of strong intermolecular hydrophobic associations of the octadecyl groups above a critical polymer concentration. Fractured hydrogels healed within 30 min without any external intervention. Increasing hydrogel polymer content from 31 wt % to 39 wt % resulted in a threefold increase in the shear modulus and 50% reduction of the relaxation time. Addition of 4 mM NaCl to a hydrogel of 31 wt % polymer content resulted in 2.5 times longer relaxation time and 24% decrease in shear modulus. The hydrogels swelled up water by up to four times its weight, which corroborates the robustness of the hydrophobic association crosslinks. The bulk properties of the hydrogels are discussed in terms of the hydrophobic associations of the O‐groups and the electrostatic interaction of the MA‐groups in the polymer chains. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44800.     

Synthesis and evaluation of sucrose‐containing polymeric hydrogels for oral drug delivery

Biodegradable and biocompatible copolymeric hydrogels based on sucrose acrylate, N‐vinyl‐2‐pyrrolidinone, and acrylic acid were designed and synthesized. Because of the growing importance of sugar‐based hydrogels as drug delivery systems, these new pH‐responsive sucrose‐containing copolymeric hydrogels were investigated for oral drug delivery. The sucrose acrylate monomer was synthesized and characterized. The copolymeric hydrogel was synthesized by free‐radical polymerization. Azobisisobutyronitrile (AIBN) was the free‐radical initiator employed and bismethyleneacrylamide (BIS) was the crosslinking agent used for hydrogel preparations. Homopolymeric vinyl pyrrolidone hydrogels were also prepared by the same technique. The hydrogels were characterized by differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). These results indicate the pH‐responsive nature of the hydrogels. The gels swelled more in SIF than in SGF. A model drug, propranolol hydrochloride (PPH), was entrapped in these gels and the in vitro release profiles were established separately in both enzyme‐free SGF and enzyme‐free SIF. The drug release was found to be faster in SIF. About 93 and 99% of the entrapped drug was released over a period of 24 h in SGF and SIF, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2597–2604, 2002     

Novel thermosensitive hydrogel composites based on poly(d,l‐lactide‐co‐glycolide) nanoparticles embedded in poly(n‐isopropyl acrylamide) with sustained drug‐release behavior

To reach sustained drug release, a new composite drug‐delivery system consisting of poly(d,l ‐lactide‐co‐glycolide) (PLGA) nanoparticles (NPs) embedded in thermosensitive poly(N‐isopropyl acrylamide) (PNIPAAm) hydrogels was developed. The PNIPAAm hydrogels were synthesized by free‐radical polymerization and were crosslinked with poly(ethylene glycol) diacrylate, and the PLGA NPs were prepared by a water‐in‐oil‐in‐water double‐emulsion solvent‐evaporation method. The release behavior of the composite hydrogels loaded with albumin–fluorescein isothiocyanate conjugate was studied and compared with that of the drug‐loaded neat hydrogel and PLGA NPs. The results indicate that we could best control the release rate of the drug by loading it to the PLGA NPs and then embedding the whole system in the PNIPAAm hydrogels. The developed composite hydrogel systems showed near zero‐order drug‐release kinetics along with a reduction or omission of initial burst release. The differential scanning calorimetry results reveal that the lower critical solution temperature of the developed composite systems remained almost unchanged (<1°C increase only). Such a characteristic indicated that the thermosensitivity of the PNIPAAm hydrogel was not distinctively affected by the addition of PLGA NPs. In conclusion, an approach was demonstrated for the successful preparation of a new hybrid hydrogel system having improved drug‐release behavior with retained thermosensitivity. The developed systems have enormous potential for many biotechnological applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40625.     

A facile preparation of pH‐temperature dual stimuli‐responsive supramolecular hydrogel and its controllable drug release

A series of pH‐temperature dual stimuli‐responsive random copolymers poly[N,N‐dimethylaminoethyl methacrylate‐co‐poly(poly(ethylene glycol) methyl ether methacrylate][poly(DMAEMA‐co‐MPEGMA)] were synthesized by free radical polymerization. The supramolecular hydrogel was formed by pseudopolyrotaxane, which was prepared with the host‐guest interactions between α‐cyclodextrin (α‐CD) and poly(ethylene glycol) (PEG) side chains. Fourier transform infrared (FT‐IR), nuclear magnetic resonance (¹H NMR), and X‐ray diffraction (XRD) confirmed the structures of the hydrogels. The pH‐temperature dual stimuli responsive properties of the hydrogels were characterized by rheometer. Finally, the controllable drug release behavior of the hydrogel, which was used 5‐fluorouracil (5‐Fu) as the model drug, was investigated at different temperatures and different pH values. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43279.     

Preparation and application in drug controlled delivery of pH‐sensitive P(CE‐co‐DMAEMA‐co‐MEG) hydrogel

A pH‐sensitive hydrogel [P(CE‐co‐DMAEMA‐co‐MEG)] was synthesized by the free‐radical crosslinking polymerization of N,N‐dimethylaminoethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate(MPEG‐Mac) and methoxyl poly(ethylene glycol)‐poly(caprolactone)‐methacryloyl methchloride (PCE‐Mac). The effects of pH and monomer content on swelling property, swelling and deswelling kinetics of the hydrogels were examined and hydrogel microstructures were investigated by SEM. Sodium salicylate was chosen as a model drug and the controlled‐release properties of hydrogels were pilot studied. The results indicated that the swelling ratios of the gels in stimulated gastric fluids (SGF, pH = 1.4) were higher than those in stimulated intestinal fluids (SIF, pH = 7.4), and followed a non‐Fickian and a Fickian diffusion mechanism, respectively. In vitro release studies showed that its release rate depends on different swelling of the network as a function of the environmental pH and DMAEMA content. SEM micrographs showed homogenous pore structure of the hydrogel with open pores at pH 1.4. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40737.     

Effects of clay concentration on the morphology and rheological properties of xanthan gum‐based hydrogels reinforced with montmorillonite particles

This work presents results of the morphology and rheological properties of xanthan gum (XG)‐based hydrogels reinforced by montmorillonite (MMT) particles. The results show that hydrogels exhibit self‐supporting characteristics when a critical MTT concentration of approximately 2.0% w/w is used. Wide‐angle, small‐angle X‐ray diffraction patterns and transmission electron microscopy reveal that for concentrations up to about 1.0% w/w the MTT particles are homogeneously distributed and exfoliated in the XG matrix. MTT particles aggregate at higher concentrations, contributing to the formation of junction points leading to hydrogels consolidation. Fourier transform infrared analysis indicates that the mechanism that enables the hydrogels formation might be attributed to hydrogen bonds crosslinking XG molecules with the surface of MTT particles. The storage modulus is higher as MTT concentration increases, but the loss modulus remains practically unchanged. Increasing temperature produces a drop in storage modulus, but the drop is minimized over a wider temperature range, as the MTT concentration is higher. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44517.     

Rheological properties of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semi‐interpenetrating networks

For the increasing demands of multifunctional materials in applications such as drug delivery system, a pH‐ and temperature‐responsive polyelectrolyte copolymer gel system was studied using rheometry. Rheological properties, determined by plate–plate rheometry in oscillatory shear, of hydrogels formed by free radical initiated copolymerization of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methylpropanesulphonic acid (AMPS) in the presence of methylene bisacrylamide (MBAA) as crosslinker are compared with the properties of semi‐interpenetrating network (SIPN) polyelectrolyte gels made by incorporation of poly(ethylene glycol) with molar mass 6000 g mol^?1 (PEG6000). Based on our systematic studies for this PEG/SIPN system, the effects of initiator and crosslinker concentration, relative proportions of comonomer units in the main chains, PEG6000 content and temperature on viscoelastic properties, unusual high storage moduli at small strain for the SIPN were discussed. The SIPN gel with characteristics of PEG molecules as well as pH and temperature responsiveness from AMPS and NIPA units has potential application in drug delivery system design. Ice‐like rheological behavior of the PEG/AMPS‐NIPA SIPN gels at low temperature was first time reported and water remains homogeneous without phase separation in PEG/AMPS‐NIPA SIPN hydrogels at low temperature may be considered as an ideal candidate for water storage material. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dual‐Crosslinked Human Serum Albumin‐Polymer Hydrogels for Affinity‐Based Drug Delivery

A dual‐crosslinked in situ gelling drug delivery scaffold based on dextran (DEX), thiolated serum albumin, and poly(ethylene glycol) (PEG) is presented. Dextran–vinyl sulfone conjugates with varied molecular weight and degrees of substitution are synthesized by controlling the reaction time and temperature with divinyl sulfone. Dextran–human serum albumin (sHSA) hydrogels are prepared using a thiol‐vinyl sulfone Michael addition reaction with thiolated albumin as the crosslinker. Poly(ethylene glycol) dithiol is added as a third component to the crosslinked dextran–human serum albumin hydrogel to facilitate additional crosslinking, and reduce gelation time, while modulating the physicochemical properties of the Dex–sHSA–PEG network. The onset of gelation of the modular three‐component dual‐crosslinked hydrogel network ranges from 45 min to 1.5 h depending on gel constituent concentrations and the gelation temperature (25 or 37 °C). All gels remain stable for over a 25 d period under physiological conditions. In vitro drug release assays show that dual‐crosslinked Dex–sHSA–PEG hydrogels can deliver doxorubicin in a sustained manner over 7 d. Finally, a Tetrazolium‐based assay shows the biocompatible nature of the Dex–sHSA–PEG hydrogels and capacity to deliver doxorubicin successfully to MCF‐7 breast cancer cells.     

Thermosensitive PCL‐PEG‐PCL hydrogels: Synthesis,characterization, and delivery of proteins

In this work, a biodegradable and injectable in situ gel‐forming controlled drug delivery system based on thermosensitive poly(ε‐caprolactone)‐poly(ethylene glycol)‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) hydrogels was studied. A series of PCL‐PEG‐PCL triblock copolymers were synthesized and characterized by ¹H‐NMR and gel permeation chromatography (GPC). Thermosensitivity of the PCL‐PEG‐PCL triblock copolymers was tested using the tube inversion method. The in vitro release behaviors of two model proteins, including bovine serum albumin (BSA) and horseradish peroxidase (HRP), from PCL‐PEG‐PCL hydrogels were studied in detail. The in vivo gel formation and degradation of the PCL‐PEG‐PCL triblock copolymers were also investigated in this study. The results showed that aqueous solutions of the synthesized PCL‐PEG‐PCL copolymers can form in situ gel rapidly after injection under physiological conditions. The PCL‐PEG‐PCL hydrogels showed the ability to control the release of incorporated BSA and HRP. The released HRP was confirmed to conserve its biological activity by specific enzymatic activity assay. The in vivo gel formation and degradation studies indicated that PCL‐PEG‐PCL copolymers hydrogels can sustain at least 45 days by subcutaneous injection. Therefore, owing to great thermosensitivity and biodegradability of these copolymers, PCL‐PEG‐PCL copolymers hydrogels show promise as an in situ gel‐forming controlled drug delivery system for therapeutic proteins. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of highly swellable hydrogels of water‐soluble carboxymethyl chitosan and poly(ethylene glycol)

Highly swellable hydrogels were produced by crosslinking of high molecular weight carboxymethylated chitosan (CmCHT) with poly(ethylene glycol) (PEG) oligomers. The hydrogel swelling capacity could be controlled via the crosslinking density and ranged from 900% to 5600%. The hydrogels showed good homogeneity with a high interconnected porosity in the swollen state and with nanodomains rich in CmCHT and others rich in PEG diglycidyl ether. Oscillatory frequency sweep analysis showed a storage modulus of 27 kPa for the hydrogel with the highest crosslinking density, which together with the exhibited enzyme degradability with lysozyme at 59 days indicate that these hydrogels have potential use in delivery systems or soft tissue regeneration. © 2017 Society of Chemical Industry     

Preparation a novel pH‐sensitive blend hydrogel based on polyaspartic acid and ethylcellulose for controlled release of naproxen sodium

Hydrogels based on pH‐sensitive polymers are of great interest as potential biomaterials for the controlled delivery of drug molecules. In this study, a novel, pH‐sensitive hydrogel was synthesized by poly(aspartic acid) (PASP) crosslinked with 1,6‐hexanediamine and reinforced with ethylcellulose (EC). The loading and release characteristics of naproxen sodium (NS) were studied. The PASP–EC blend hydrogels had pH‐sensitive characteristics and were strongly dependent on the pH value. The release kinetics for NS from the PASP–EC blend hydrogels and PASP hydrogel were evaluated in simulated gastric fluid (pH = 1.05) and simulated intestinal fluid (pH = 6.8) at 37°C. The results showed that the drug‐loaded hydrogels were resistant to simulated gastric fluid, and hence, they could be useful for oral drug delivery. Compared with the PASP hydrogel, the PASP–EC blend hydrogels showed a lower release rate of NS in the same pH conditions. It was evident that the presence of hydrophobic groups (EC) retarded the release of NS and led to sustained release. The kinetics of NS release from the drug‐loaded hydrogels conformed to the Korsmeyer–Peppas model. The release exponent of the model was 0.7291, which indicated multiple drug release. The PASP–EC blend hydrogels were biodegradable and pH sensitive; there would be a wide range of applications for them in controlled drug‐delivery systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly{N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid} hydrogels for drug delivery

A novel pH‐sensitive hydrogel system composed of itaconic acid (IA) and N‐[3‐(dimethylamino) propyl] methacrylamide was designed. This system was prepared by aqueous copolymerization with N,N‐methylene bisacrylamide as a chemical crosslinker. The chemical structure of the hydrogels was characterized by Fourier transform infrared (FTIR) spectroscopy. The microstructure and morphology of the hydrogels were evaluated by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The SEM study of hydrogels on higher magnification revealed a highly porous morphology with uniformly arranged pores ranging from 40 to 200 μm in size. XRD analysis revealed the amorphous nature of the hydrogels, and it was found that an increase in the IA content in the monomer feed greatly reduced the crystallinity of the hydrogels. Swelling experiments were carried out in buffer solutions at different pH values (1.2–10) at 37°C ± 1°C to investigate their pH‐dependent swelling behavior and dimensional stability. An increase in the acid part (IA) increased the swelling ratio of the hydrogels. Temperature‐sensitive swelling of the hydrogels was investigated at 20–70°C in simulated intestinal fluid. The hydrogels swelled at higher temperatures and shrank at lower temperatures. 5‐Aminosalicylic acid (5‐ASA) was selected as a model drug, and release experiments were carried out under simulated intestinal and gastric conditions. 5‐ASA release from the poly N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid‐80 (PDMAPMAIA‐80) hydrogel was found to follow non‐Fickian diffusion mechanism under gastric conditions, and a super case II transport mechanism was found under intestinal conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermo‐responsive injectable hydrogel system based on poly(N‐isopropylacrylamide‐co‐vinylphosphonic acid). I. Biomineralization and protein delivery

To achieve the injectable hydrogel system in order to improve bone regeneration by locally delivering a protein drug including bone morphogenetic proteins, thermo‐responsive injectable hydrogels composed of N‐isopropylacrylamide (NIPAAm) and vinyl phosphonic acid (VPAc) were prepared. The P(NIPAAm‐co‐VPAc) hydrogels were also biomineralized by urea‐mediation method to create functional polymer hydrogels that deliver the protein drug and mimic the bone extracellular matrix. The loosely cross‐linked P(NIPAAm‐co‐VPAc) hydrogels were pliable and fluid‐like at room temperature and could be injected through a small‐diameter aperture. The lower critical solution temperature (LCST) of P(NIPAAm‐co‐VPAc) hydrogel was influenced by the monomer ratio of NIPAAm/VPAc and the hydrogel with a 96/4 molar ratio of NIPAAm/VPAc exhibited an LCST of ～34.5°C. Water content was influenced by temperature, NIPAAm/VPAc monomer ratio, and biomineralization; however, all hydrogels maintained more than about 77% of the water content even at 37°C. In a cytotoxicity study, the P(NIPAAm‐co‐VPAc) and biomineralized P(NIPAAm‐co‐VPAc) hydrogels did not significantly affect cell viability. The loading content of bovine serum albumin in hydrogel, which was used as a model drug, gradually increased with the amount of VPAc in the hydrogel owing to the ionic interaction between VPAc groups and BSA molecules. In addition, the release behavior of BSA from the P(NIPAAm‐co‐VPAc) hydrogels was mainly influenced by the drug loading content, water content, and biomineralization of the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009