Curing kinetics,thermal, and adhesive properties of acetylene‐terminated benzoxazine

The acetylene‐terminated benzoxazine monomer (BB‐apa) has been synthesized using 2,2‐bis(4‐hydroxyphenyl)butane, 3‐aminophenylacetylene, and paraformaldehyde. The structure of the monomer was characterized by FTIR spectroscopy and ¹H NMR spectra, which indicated that the reactive oxazine ring and acetenyl groups existed in molecular structure of BB‐apa. The polymerization behavior was monitored by FTIR and non‐isothermal differential scanning calorimetry (DSC), which showed that the BB‐apa had completely cured with multiple polymerization mechanisms according to oxazine ring‐opening and ethynyl addition polymerization. The curing kinetics results revealed that the introduction of ethynyl groups can accelerate the ring‐opening polymerization of benzoxazine, leading to a lower curing temperature and apparent activation energy. Moreover, the thermoset derived from the BB‐apa exhibits higher thermal stability and lap shear strength (at 350 °C) with the glass transition temperature of 353 °C compared with the traditional benzoxazine polymer without ethynyl groups (BB‐a). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44547.     

Thermal analysis and mechanical characterization of maleimide‐functionalized benzoxazine/epoxy copolymers

Maleimide‐functionalized benzoxazine is copolymerized with epoxy to improve toughness and processibility without compromising the thermal properties. The incorporation of maleimide functionality into the benzoxazine monomer results in a high performance polymer. All three possible polymerization reactions are confirmed using Fourier transform infrared (FT‐IR) spectroscopy. While maleimide‐functionalized benzoxazine has a glass transition temperature, T_g, of 252°C, a further 25°C increase of T_g is observed when copolymerized with epoxy. The flexural properties are also measured, and the copolymers exhibit a flexural modulus of 4.2–5.0 GPa. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1670–1677, 2006     

Remarkable improvement of thermal stability of main‐chain benzoxazine oligomer by incorporating o‐norbornene as terminal functionality

A new main‐chain benzoxazine oligomer with o‐norbornene functionality as end groups has been designed and synthesized. As compared to traditional main‐chain type benzoxazine polymers, this benzoxazine oligomer with o‐norbornene terminal functionality can undergo further crosslinking polymerization after general ring‐opening polymerization of oxazine rings. Another main‐chain benzoxazine oligomer has also been designed based on the reaction of bisphenol‐A, 4,4′‐diaminodiphenylmethane, paraformaldehyde, and phenol for comparison. The structure of the synthesized oligomers is confirmed by ¹H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy (FTIR). The molecular weight has been determined by using gel permeation chromatography (GPC). The benzoxazine oligomer containing o‐norbornene functionality can polymerize with multiple polymerization mechanisms rather than the single mechanism common to traditional 1,3‐benzoxazine resins. The polymerization mechanisms are monitored by in situ FTIR and differential scanning calorimetry (DSC). Moreover, the thermoset derived from the benzoxazine oligomer containing o‐norbornene functionality exhibits high thermal stability with the transition temperature of 360 °C and a high T_d5 of 404 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45408.     

Synthesis and characterization of 4,4′‐diaminodiphenyl methane‐based benzoxazines and their polymers

A series of diamine‐based benzoxazine precursors have been prepared using 4,4′‐diaminodiphenyl methane, formaldehyde, and different phenol derivatives including phenol, p‐cresol, and 2‐naphthol. Their chemical structures were identified by FTIR, ¹H NMR, and elemental analysis. The curing reactions of those precursors were monitored by FTIR and DSC. The obtained materials exhibited higher glass transition temperature and char yields than the corresponding bisphenol‐A based polybenzoxazines. The polybenzoxazine prepared from phenol showed the highest char yields of 65% and thermal stability with 5 and 10% weight‐loss temperatures at 346 and 432°C, respectively. The polybenzoxazine prepared from 2‐naphthol exhibited the highest glass transition temperature at 244°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

An m‐phenylenediamine‐based benzoxazine with favorable processability and its high‐performance thermoset

A novel aromatic diamine‐based benzoxazine (P‐mPDA) is successfully synthesized from m‐phenylenediamine (m‐PDA), 2‐hydroxybenzaldehyde, and formaldehyde. The polymerization behavior of P‐mPDA and the properties of its thermoset are studied. The results indicate that P‐mPDA owns favorable processability including low polymerization temperature, low liquefying temperature, and wide processing window. Even lower polymerization temperature (polymerization onset temperature as low as 80 °C) can be achieved by the promotion of catalysts. The ring‐opening polymerization of P‐mPDA first generates polybenzoxazine with N, O‐acetal‐type structure and arylamine Mannich‐type structure, following which rearrangement from N, O‐acetal‐type structure to phenolic Mannich‐type structure proceeds at elevated temperature. Furthermore, the polymerized P‐mPDA shows outstanding performance such as extremely high glass transition temperature (T_g) of 280 °C, high char yield above 53% at 800 °C under nitrogen and excellent mechanical property. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43368.     

Synthesis and characterization of 2‐oxazoline‐benzoxazine compound and its polymer

A novel 2‐oxazoline‐benzoxazine (POB) was synthesized with 2‐(hydroxylphenyl)‐2‐oxazoline, 1,3,5‐triphenylhexahydro‐1,3,5‐triazine and paraformaldehyde. The chemical structure of the monomer was confirmed by FTIR, ¹H‐NMR, ¹³C‐NMR, and MS. The curing behavior of the monomer was studied by DSC and FTIR, and the ring opening reaction of the monomer was found to occur from 187.5°C. The results of DMA and TGA demonstrated that the thermal properties of polymer for POB monomer (P‐m) are better than polymer for POB precursor (P‐p), because that the oligomer in benzoxazine precursor decreased the perfection of the polymer's network structure; it was also found that the thermal properties of P‐m and P‐p are much better than the common polybenzoxazine and the composite material of benzoxazine and 2‐oxazoline. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci , 2008.     

Curing reaction mechanism and heat resistance properties of hexa‐(4‐carboxyl‐phenoxy)‐cyclotriphosphazene/bisphenol A aniline benzoxazine blends

A blend system of hexa‐(4‐carboxyl‐phenoxy)‐cyclotriphosphazene (HCPCP) and bisphenol A aniline benzoxazine (BA‐a) was prepared, and its curing reaction mechanism and heat resistance properties were studied. The curing reaction mechanism of the blend was explored by differential scanning calorimetry, Fourier transform infrared spectroscopy, and modeling software using model compounds Ar‐COOH and hexachlorocyclotriphosphazene (HCCP). The heat resistance properties of the cured blends were studied by thermogravimetric analysis and dynamic mechanical analysis. The polymerization of benzoxazine was catalyzed by HCPCP through phosphazene ring and acid groups, and phosphazene played a predominant role. Compared with the materials with a single functional group (Ar‐COOH and HCCP), HCPCP containing two functional groups (phosphazene ring and acid) exhibited weaker catalytic effects, mainly due to the high molecular weight of HCPCP obstructing movement and causing steric hindrance. In addition, HCPCP had a positive effect on the thermal stability of polybenzoxazine from 250 to 400 °C. When the HCPCP content reached 3%, the cured blend had the highest glass‐transition temperature (222.2 °C), which is higher by 20 °C than that of cured benzoxazine. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46389.     

Curing behaviors and thermal properties of benzoxazine and N,N′‐(2, 2, 4‐trimethylhexane‐1, 6‐diyl) dimaleimide blend

A blend of bisphenol‐A based benzoxazine (BA‐a)/N, N′‐(2, 2, 4‐Trimethylhexane‐1, 6‐diyl) dimaleimide (TBMI) with the ratio of 1:1 was prepared and its curing behaviors were studied by differential scanning calorimetry (DSC), Fourier Transform Infrared (FTIR). The curing mechanism was proposed based on the semiquantitative analysis from FTIR spectra. The model compound was used to study the catalysis effect of BA‐a on the curing reaction of TBMI. It was found the curing reactions of BA‐a and TBMI not only proceeded simultaneously, but their coreactions also occurred. The research further indicated that negative oxygen ions from ring opening of benzoxazine mainly promoted the polymerization of maleimide groups, even though the amine group of benzoxazine had a positive effect on the reaction of maleimide groups. Besides, BA‐a and TBMI blends showed improved thermal properties based on the results from DMA and TGA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polyether‐based main‐chain‐type polytriazole elastomer with benzoxazine via a 1,3‐dipolar cycloaddition reaction

A novel functional polyether‐based elastomer with a benzoxazine structure in its main chain was successfully synthesized via a 1,3‐dipolar cycloaddition reaction. Benefitting from a facile one‐pot synthesis strategy, the elastomer was prepared at low temperature (80°C) and was characterized clearly afterward. The azide‐terminated polyether and acetylene‐terminated benzoxazine were used as the soft and hard segments, respectively, in the polymer chain. Because the triazole rings served as stable linkage between the soft and hard segments, the elastomer possessed good thermal stability (the 5% weight loss temperature could exceed 350°C) compared to traditional elastomers, such as polyurethane. The rigid benzoxazine rings provided the product with good mechanical properties (the tensile strength of the elastomer could exceed 30 MPa). Furthermore, the ring‐opening polymerization of oxazine rings in the structure gifted the elastomer with possibility of thermally induced structural transformation. The thermally induced structural transformation could conveniently realize the conversion of the elastomer to a thermosetting resin. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42820.     

Synthesis and curing behavior of a novel benzoxazine‐based bisphthalonitrile monomer

A novel bisphthalonitrile containing benzoxazine units (BZ‐BPH) was synthesized via a solventless method from 4,4′‐dihydroxybiphenyl, paraformaldehyde, and 4‐aminophenoxylphthalonitrile. The chemical structure of BZ‐BPH was confirmed by ¹H‐NMR and ¹³C‐NMR analyses. The curing behavior was investigated with DSC, FTIR, TGA, and rheology techniques. The monomer manifested a two‐stage thermal polymerization pattern. The first stage was attributed to the ring‐opening polymerization of benzoxazine moiety, and the second to the polymerization of phthalonitriles. Study about the effect of the catalysts including 4,4′‐diaminodiphenylsulfone and FeCl₃ on the polymerization of BZ‐BPH was performed, and the result indicated that the addition of these agents could increase the curing rate and lower the curing temperature. Additionally, the cured product showed excellent thermal and thermo‐oxidative stability, the high char yield was 76.0% by weight at 800°C in nitrogen atmosphere and 81.2% by weight at 600°C in air, and temperature at 5% weight loss (T_5%) in nitrogen and air was 477.9°C and 481.7°C, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and cure behavior of organoclay‐modified allyl‐functional benzoxazine resin and the properties of their nanocomposites

A new type of polybenzoxazine‐clay nanocomposites were prepared by the in‐situ polymerization of allyl‐functional benzoxazine monomer, bis(3‐allyl‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl)isopropane (B‐ala), in the presence of two different types of organoclay, allyldimethylstearylammonium‐montmorillonite and propyldimethylstearylammonium‐montmorillonite. The organoclays were mixed with molten B‐ala, followed by pouring into glass mold and then gradual curing up to 250°C. DSC and IR were used to follow the cure behavior of B‐ala in the presence of organoclay, indicating that organoclays catalyzed the ring opening of cyclic benzoxazine structure. The XRD of the nanocomposites showed featureless patterns, suggesting the exfoliation of the organoclay into the matrix. The viscoelastic properties of the hybrids showed that the glass transition temperatures (T_g) of the nanocomposites shifted to lower temperature in the presence of small amount of organoclay, but T_g started to increase with the increase of the organoclay content. This result suggests that, in the presence of organoclay, the curing reaction of ally and benzoxazine occurred in a different way, resulting in a different network structure. However, the presence of dispersed layered silicates into the matrix enhanced the thermal stability over the neat thermoset resin. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Synthesis and characterization of new polybenzoxazines from renewable resources for bio‐composite applications

Renewable natural resources such as eugenol, furfurylamine, stearylamine, and jute fiber were used to prepare polybenzoxazine composites. The purity of eugenol which is extracted from clove was confirmed by gas chromatography. FTIR, ¹H, and ¹³C NMR spectroscopic analysis were used to determine the structure of eugenol and the benzoxazine monomers namely 6‐allyl‐3‐furfuryl‐8‐methoxy‐3,4‐dihydro‐2H‐1,3‐benzoxazine (EF‐Bz) and 6‐allyl‐3‐octadecyl‐8‐methoxy‐3,4 dihydro‐2H‐1,3‐benzoxazine (ES‐Bz) synthesized from it. The curing analysis from differential scanning calorimetric analysis shows that the onset of curing is shifted to lower temperature (161°C) for EF‐Bz, when compared with ES‐Bz (174°C). The thermal stability analyzed from thermogravimetric analysis shows that the polybenzoxazine EF‐Pbz has higher thermal stability (T_5% = 361°C) with that of ES‐Pbz (T_5% = 313°C). The storage modulus, tensile, and flexural strength of the EF‐Bz/Jute fiber composite show high value when compared with ES‐Bz/Jute fiber composites. POLYM. COMPOS., 37:1821–1829, 2016. © 2014 Society of Plastics Engineers     

Study on microemulsion polymerization of N‐butyl maleimide

By using sodium dodecyl sulfate (SDS) as an emulsifier, polymerization of N‐butyl maleimide (NBMI) was carried out in ternary oil‐in‐water microemulsion, initiated with potassium persulfate (KPS). The kinetics of microemulsion polymerization were measured by dilatometry. The effects of initiator concentration, polymerization temperature, monomer concentration, and emulsifier concentration on polymerization kinetics were investigated. On this basis, the polymerization kinetics were discussed. The experiment result showed that the microemulsion polymerization kinetics of N‐butyl maleimide were almost consistent with the prediction of the Smith‐Ewart theory in conventional emulsion polymerization, except that the emulsifier showed a special effect on polymerization. At the same time, the polymer was characterized by IR, ¹H‐NMR, DSC, and TGA. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 805–809, 2000     

Dielectric and thermal behaviors of fluorine‐containing dianhydride‐modified polybenzoxazine: A molecular design flexibility

Fluorine‐containing copolybenzoxazines were successfully prepared by reacting bisphenol‐AF/aniline‐based benzoxazine resin (BAF‐a) with 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA) in N,N‐dimethylacetamide solvent. The dielectric and thermal properties as well as flexibility of the resulting copolymer films were investigated. The incorporation of fluorine groups into polybenzoxazine was found to substantially decrease the dielectric constant of the resulting copolybenzoxazine to as low as 2.6. The formation of ester linkages between the hydroxyl groups in the poly(BAF‐a) and the carbonyl groups in the 6FDA resulted in substantially enhanced flexibility of the copolybenzoxazines. Moreover, the copolymers showed superior degradation temperature and significant improvement in char yield, up to 464 °C and 56%, respectively. The glass‐transition temperature of the copolybenzoxazines was increased with increasing dianhydride content and exhibited a maximum value of 290 °C at 2.5/1 mole ratio of poly(BAF‐a) to 6FDA. Therefore, the fluorine‐containing dianhydride‐modified polybenzoxazines are appropriate for applications as polymeric films for coatings and as a good electrical insulation material with high thermal resistance. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45204.     

Synthesis and characterization of a novel siloxane‐imide‐containing polybenzoxazine

A novel siloxane‐imide‐containing polybenzoxazine based on N,N′‐bis(N‐phenyl‐3,4‐dihydro‐2H‐benzo[1,3]oxazine)‐5, 5′‐bis(1,1′,3,3′‐tetramethyldisiloxane‐1,3‐diyl)‐bis(norborane‐2,3‐dicarboximide) (BZ‐A1) was successfully synthesized. The thermal properties of BZ‐A1 are superior to those of conventional polybenzoxazines lacking siloxane groups. Polymerized BZ‐A1 possesses extremely low surface free energy (γ_s = 15.1 mJ m^?2) after curing at 230 °C for 1 h. Moreover, the surface free energy of polymerized BZ‐A1 is more stable than conventional bisphenol A‐type polybenzoxazine during thermal curing and annealing processes, indicating that polymerized BZ‐A1 is more suitable for applications requiring low surface free energy materials for high temperatures over long periods of time. Copyright © 2010 Society of Chemical Industry     

Morphology and properties of poly(benzoxazine‐co‐urethane)s based on bisphenol‐S/aniline benzoxazine

Poly(benzoxazine‐co‐urethane) was prepared by melt‐blending bisphenol‐S/aniline‐type benzoxazine (BS‐a) with isocyanate‐terminated polyurethane (PU) prepolymer based on 2,4‐toluene diisocyanate and poly(ethylene glycol), followed by thermally activated polymerization of the blend. The copolymerization reaction between BS‐a and PU prepolymer was monitored using Fourier transform infrared spectroscopy. The morphology, dynamic mechanical properties, and thermal stability of the poly(benzoxazine‐co‐urethane) were studied using scanning electron microscopy, dynamic mechanical analysis, and thermogravimetry. Homogeneous morphology is shown in scanning electron micrographs of the fracture surfaces of poly(benzoxazine‐co‐urethane)s with different urethane weight fractions, and the roughness of the surface increases with urethane content increasing. Correspondingly, a single glass transition temperature (T_g) is shown on the dynamic mechanical analysis curves of the poly(benzoxazine‐co‐urethane)s, and the T_g is higher than that of the polybenzoxazine. With increase in the urethane content, the T_g and water absorption of poly(benzoxazine‐co‐urethane) increase, whereas the storage modulus and thermal stability decrease. POLYM. ENG. SCI., 53:2633–2639, 2013. © 2013 Society of Plastics Engineers     

Reinforcement of polybenzoxazine matrix with organically modified mica

Novel polybenzoxazine–clay hybrids were prepared by the in situ polymerization of the typical benzoxazine monomer, bis(3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl)isopropane (B‐a) in the presence of aminolauric acid‐modified mica (ALA‐mica). Various ratios of ALA‐mica were dispersed into solutions of B‐a in N,N‐dimethylacetamide, followed by casting into film form. The hybrids were thermally cured up to 230°C, affording transparent nanocomposite films up to 10 wt% of mica loadings. The cure behavior was monitored by both IR and differential scanning calorimetry, indicating the catalytic effect of the modified mica. The morphology of the nanocomposites was studied by XRD, showing a featureless pattern, which suggests the disordered dispersion of mica into polybenzoxazine matrix. The dynamic mechanical properties of some hybrids show that the nanocomposites have higher storage modulus over the whole temperature range than the neat polybenzoxazine. Thermogravimetric analysis results confirmed that the thermal stability and char yield of polybenzoxazine resin increased apparently by hybridization with mica corresponding to the mica content. POLYM. COMPOS., 28:680–687, 2007. © 2007 Society of Plastics Engineers     

Triazine‐containing benzoxazine and its high‐performance polymer

A new synthetic route was designed to significantly increase the content of triazine structure in benzoxazine resin. 2,4,6‐Tri(4‐hydroxylphenyl)‐13,5‐s‐triazine (TP) was synthesized by cyclotrimerization of 4‐cyanolphenol and then benzoxazine monomer‐containing triazine [2,4,6‐tri(3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazin‐6‐yl)‐1,3,5‐s‐triazine (BZ‐ta)] was synthesized via Mannich reaction from TP. Finally, the cross‐linked polymer P(BZ‐ta) was produced by thermal polymerization of BZ‐ta. BZ‐ta was characterized by nuclear magnetic resonance spectroscopy (NMR), fourier transform infrared spectroscopy (FTIR), mass spectrum, elemental analysis, and viscosity measurement. Curing behavior of BZ‐ta was studied by differential scanning calorimetry, FTIR, and gel permeation chromatography. The structure and properties of P(BZ‐ta) were investigated by powder X‐ray diffraction, dynamic mechanical analysis, and thermogravimetric analysis. The results showed that the P(BZ‐ta) had high glass temperature (T_g = 322°C), excellent thermal oxidation stability (5 and 10% weight loss temperatures in air up to 403 and 453°C, respectively), high char yield (64%, 800°C in nitrogen), and high flame‐retardance (limiting oxygen index, 39.7). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Hydrogen bonding interactions of styrene‐maleimide copolymers with diaminotriazine derivatives

Poly(styrene‐co‐N‐maleimide) precursor and poly(styrene‐co‐N‐maleimide)‐block‐polystyrene have been synthesized by quasiliving radical polymerization. Low molecular weight compounds with the sites specific for the complementary binding to the maleimide moieties via triple hydrogen bonds, 2,4‐diamino‐6‐n‐alkoxy(C‐4, C‐8, and C‐12)‐s‐triazines, have been prepared. Hydrogen bonding between diaminotriazine and maleimide units in the copolymer–diaminotriazine mixtures has been investigated by FTIR. Microphase separated structure in the block copolymer‐diaminotriazine mixtures has been confirmed by DSC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2338–2346, 2006     

Preparation of a liquid benzoxazine based on cardanol and the thermal stability of its graphene oxide composites

A novel liquid benzoxazine was synthesized by Mannich reaction of cardanol, paraformaldehyde, and allylamine. The benzoxazine structure was characterized by ¹H‐NMR and FTIR. The liquid benzoxazine could dissolve easily in many solvents. The curing behavior of the benzoxazine was characterized by differential scanning calorimetry (DSC) and its curing temperature was about 233°C. A benzoxazine‐functional silane coupling agent (BFSca) was synthesized with paraformaldehyde, phenolphthalein, and aminopropyltriethoxysilane. Graphene oxide (GO) was also made via improved Hummer's method. Then benzoxazine/GO composites were prepared using BFSca by solution blending and the curing behaviors of the composites were also characterized by IR, DSC, and thermogravimetric analysis. The minimum curing temperature and the highest 5% weight loss temperature for the composites was, respectively, 185 and 399.8°C. The SEM images of benzoxazine/GO composites demonstrated that BFSca had improved the dispersion of GO in the benzoxazine and also enhanced the thermal decomposition temperature of the composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40353.