Time‐varying input delay compensation for nonlinear systems with additive disturbance: An output feedback approach

This paper addresses the output feedback tracking control of a class of multiple‐input and multiple‐output nonlinear systems subject to time‐varying input delay and additive bounded disturbances. Based on the backstepping design approach, an output feedback robust controller is proposed by integrating an extended state observer and a novel robust controller, which uses a desired trajectory‐based feedforward term to achieve an improved model compensation and a robust delay compensation feedback term based on the finite integral of the past control values to compensate for the time‐varying input delay. The extended state observer can simultaneously estimate the unmeasurable system states and the additive disturbances only with the output measurement and delayed control input. The proposed controller theoretically guarantees prescribed transient performance and steady‐state tracking accuracy in spite of the presence of time‐varying input delay and additive bounded disturbances based on Lyapunov stability analysis by using a Lyapunov‐Krasovskii functional. A specific study on a 2‐link robot manipulator is performed; based on the system model and the proposed design procedure, a suitable controller is developed, and comparative simulation results are obtained to demonstrate the effectiveness of the developed control scheme.     

DISCRETE‐TIME OBSERVER‐BASED OUTPUT TRACKING CONTROLLER DESIGN FOR NONMINIMUM PHASE SYSTEMS WITH PERTURBATIONS

In this paper, an observer‐based output tracking controller for an SISO nonminimum phase discrete‐time system is proposed. When the disturbances between two consecutive sampling instances do not vary significantly, the observer algorithm can simultaneously estimate the system states and the unknown perturbation, and can render the estimation errors of system states and perturbation constrained in a small bounded region. The control law, including a feedforward term and a feedback input, can make the tracking error constrained in a small bounded region with guaranteed system stability. A numerical example is presented to demonstrate the applicability of the proposed control scheme.     

REDUCED‐ORDER MODELS FOR FEEDBACK STABILIZATION OF LINEAR SYSTEMS WITH A SINGULAR PERTURBATION MODEL

The problem of output feedback stabilization of linear systems based on a reduced‐order model is addressed in this paper. New reduced‐order models are proposed for the output feedback design of linear systems with a singular perturbation model. An output feedback controller with a zero steady‐state gain matrix is proposed for stabilizing this kind of system. It is shown that with the proposed controller the reduced‐order model based feedback design can guarantee the actual closed‐loop stability for the sufficiently small perturbation parameter. This approach can overcome the difficulties in the existing design method using the so‐called zeroth‐order approximation model, whose validity is highly dependent on the value of the perturbation parameter.     

Dynamic output feedback control with output quantizer for nonlinear uncertain T‐S fuzzy systems with multiple time‐varying input delays and unmatched disturbances

The dynamic output feedback control problem with output quantizer is investigated for a class of nonlinear uncertain Takagi‐Sugeno (T‐S) fuzzy systems with multiple time‐varying input delays and unmatched disturbances. The T‐S fuzzy model is employed to approximate the nonlinear uncertain system, and the output space is partitioned into operating regions and interpolation regions based on the structural information in the fuzzy rules. The output quantizer is introduced for the controller design, and the dynamic output feedback controller with output quantizer is constructed based on the T‐S fuzzy model. Stability conditions in the form of linear matrix inequalities are derived by introducing the S‐procedure, such that the closed‐loop system is stable and the solutions converge to a ball. The control design conditions are relaxed and design flexibility is enhanced because of the developed controller. By introducing the output‐space partition method and S‐procedure, the unmatched regions between the system plant and the controller caused by the quantization errors can be solved in the control design. Finally, simulations are given to verify the effectiveness of the proposed method.     

Composite stratified anti‐disturbance control for a class of MIMO discrete‐time systems with nonlinearity

Anti‐disturbance control and estimation problem are investigated for nonlinear system subject to multi‐source disturbances. The disturbances classified model is proposed based on the error and noise analysis of priori knowledge. The disturbance observers are constructed separately from the controller design to estimate the disturbance with partial known information. By integrating disturbance‐observer‐based control with discrete‐time sliding‐mode control (DSMC), a novel type of composite stratified anti‐disturbance control scheme is presented for a class of multiple‐input–multiple‐output discrete‐time systems with known and unknown nonlinear dynamics, respectively. Simulations for a flight control system are given to demonstrate the effectiveness of the results compared with the previous schemes. Copyright © 2011 John Wiley & Sons, Ltd.     

Adaptive backstepping‐based control design for uncertain nonlinear active suspension system with input delay

This paper addresses the control problem of adaptive backstepping control for a class of nonlinear active suspension systems considering the model uncertainties and actuator input delays and presents a novel adaptive backstepping‐based controller design method. Based on the established nonlinear active suspension model, a projector operator–based adaptive control law is first developed to estimate the uncertain sprung‐mass online, and then the desirable controller design and stability analysis are conducted by combining backstepping technique and Lyapunov stability theory, which can not only deal with the actuator input delay but also achieve better dynamics performances and safety constraints requirements of the closed‐loop control system. Furthermore, the relationship between the input delay and the state variables of this vehicle suspension system is derived to present a simple and effective method of calculating the critical input delay. Finally, a numerical simulation investigation is provided to illustrate the effectiveness of the proposed controller.     

Robust controller design for uncertain delayed systems and its applications to hypersonic vehicles

The longitudinal dynamics of hypersonic flight vehicles involves strong nonlinearity and coupling, uncertainties including parametric uncertainties, unmodeled uncertainties, external disturbances, and time‐varying input and state time delays. In this paper, a robust controller design method is proposed for the longitudinal stabilization of these vehicles by the signal‐compensation‐based control idea. Theoretical analysis is given to prove the robustness properties of the designed closed‐loop control system subject to multiple time‐varying uncertainties and time‐varying input and state delays. Simulation results are performed to show the validness and advantages of the proposed robust control approach.     

Boundary Control for a Flexible Inverted Pendulum System Based on a PDE Model with Input Saturation

This research considers the control problem of a flexible inverted pendulum system (FIPS) in the presence of input saturation. The model for a flexible inverted pendulum system (FIPS) is derived via the Hamilton principle. The FIPS model is divided into a fast subsystem and a slow subsystem via the singular perturbation method. We introduce an auxiliary system to deal with the input saturation of a fast subsystem. To stabilize the fast subsystem, a boundary anti‐windup control force is applied at the free end of the beam. It is proven that the closed‐loop subsystem is stable. For the slow subsystem, a sliding mode control method is employed to design a controller and a new decoupling method to design the sliding surface. Then it is shown that the slow subsystem is stable. Finally, simulation results are provided to confirm the efficacy of the proposed controller.     

Second‐order sliding mode controller design subject to mismatched unbounded perturbations

The dynamics of the second‐order sliding mode (SOSM) can be obtained by directly taking the second derivative on the sliding variable when it has a relative degree of 2 with respect to the control input. However, there will always appear some state‐dependent certain or uncertain terms in the first derivative of the sliding variable, and the derivative directly imposed on these terms could enlarge the uncertainties in the control channel. One method to reduce the uncertainties in the control channel is to hold this information in the dynamics of the first derivative of the sliding variable, while the original SOSM dynamics could be transformed to be a SOSM system with a mismatched unbounded perturbation. This paper focuses on the controller design problem for SOSM dynamics subject to mismatched unbounded perturbation. By using Lyapunov analysis, a novel backstepping‐like design methodology will be proposed. The rigorous mathematical proof will show that under the derived SOSM controller, the closed‐loop sliding mode dynamics is globally finite‐time stable. Meanwhile, the frequently used constant upper bound assumptions for the standard SOSM system can also be extended to the state‐dependent hypotheses in this paper. An academic example is illustrated to verify the effectiveness of the proposed method. Copyright © 2017 John Wiley & Sons, Ltd.     

Combining state estimator and disturbance observer in discrete‐time sliding mode controller design

In response to a multiple input/multiple output discrete‐time linear system with mismatched disturbances, an algorithm capable of performing estimated system states and unknown disturbances is proposed first, and then followed with the design of the controller. Attributed to the fact that both system states and disturbances can be estimated simultaneously with our proposed method, the estimation error is constrained at less than O(T) as the disturbance between the two sampling points is insignificant. In addition, the estimated system states and disturbances are then to be used in the controller when implementing our algorithm in a non‐minimum phase system (with respect to the relation between the output and the disturbance). The tracking error is constrained in a small bounded region and the system stability is guaranteed. Finally, a numerical example is presented to demonstrate the applicability of the proposed control scheme. Copyright © 2008 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Reduction of matched and unmatched uncertainties for a class of nonlinear perturbed systems via robust control

The aim of this paper is to design a robust control for stabilization of a class of nonlinear perturbed system subject to matched and unmatched disturbances. Here, the concept of dynamic sliding mode control and the attractive ellipsoid method advantages are used to design a robust nonlinear control algorithm, which reduces considerably the perturbation effects. Hence, in finite time, the dynamic sliding mode control brings the system trajectory to a specific configuration. After this time, the controller reduces the perturbation effects by using the high‐gain control obtained in the attractive ellipsoid method. Thus, based on the solution of a specific matrix inequality, the feedback control of the system guarantees that the trajectory will be stabilized in the ultimate uniform bounded sense. To illustrate the theoretical results, a numerical example with a comparative study is introduced. Finally, the performance of the controller designed in this paper is tested on an electromechanical real‐time system.     

High‐order sliding‐mode observer–based input‐output linearization

The problem of output control in multiple‐input–multiple‐output nonlinear systems is addressed. A high‐order sliding‐mode observer is used to estimate the states of the system and identify the discrepancy between the nominal model and the real plant. The exact and finite‐time estimation may be tackled as long as the system presents the algebraic strong observability property. Thus, a continuous robust input‐output linearization strategy can be obtained with respect to a prescribed output. As a consequence, the closed‐loop dynamics performs robustly to uncertainties/perturbations. To illustrate the advantages of the proposed method, we introduce a study case that demands a robust linear system behavior: the self‐oscillations induced in an underactuated mechanical system through a two‐relay controller. Experiments with an inertial wheel pendulum illustrate the feasibility of the proposed approach.     

基于三阶干扰观测器的三轴MEMS陀螺稳定控制

微机电系统(Micro-Electro-Mechanic System,MEMS)陀螺仪是一种新兴的惯性传感器,然而在加工制造和现场应用过程中,MEMS陀螺不可避免地会受到外界干扰的影响,降低角速率检测精度。针对无法等效到输入通道且频率成分复杂的不匹配干扰,提出一种基于三阶干扰观测器的全局滑模控制方法。利用三阶干扰观测器估计频率成分复杂的不匹配干扰,在此基础上提出一种新的非线性滑模面实现滑动模态的全局鲁棒性,滑模面的可达性由指数趋近律保证。仿真结果表明了该基于干扰观测器的全局滑模控制器能够有效抑制不匹配成分,干扰估计误差由0.58降至0.18,且陀螺三轴位置响应呈现更小的超调。     

一种无模型自适应积分终端滑模控制方法

针对一类包含扰动的非线性离散时间系统,提出一种新的无模型自适应离散积分终端滑模控制算法.该算法基于紧格式动态线性化数据模型,利用离散积分终端滑模控制算法设计无模型自适应控制器,并采用扰动估计技术估计系统的扰动项,其中动态线性化方法中“伪偏导数”的估计算法仅依赖于被控系统的I/O测量数据.理论分析证明了系统输入输出有界,并通过仿真实验验证了所提算法的有效性.     

一类不确定离散时间系统的积分滑模控制

针对一类同时存在匹配和非匹配不确定性的离散时间系统,提出一种基于幂次函数的离散积分滑模控制方法.理论分析表明,所提出的方法可以消除离散积分滑模控制系统的抖振,而且能够保证对系统的匹配和非匹配不确定性具有强鲁棒性.在系统不确定性的界未知的情况下,通过引入一步延时干扰估计完成了控制器的设计,并给出了闭环系统稳定性证明.仿真结果验证了所提出方法的有效性.     

Output feedback tracking control for lower‐triangular nonlinear time‐delay systems with asymmetric input saturation

In this paper, the problem of output feedback tracking control is investigated for lower‐triangular nonlinear time‐delay systems in the presence of asymmetric input saturation. A novel design program based on a dynamic high gain design approach is proposed to construct an output feedback tracking controller. The innovation here is that the problem of constructing tracking controller can be transformed into the problem of constructing two dynamic equations, with one being utilized to deal with the nonlinear terms and the other one being applied to analyze the influence of asymmetric input saturation. It is proved by an appropriate Lyapunov‐Krasovskii functional that the proposed tracking controller subject to saturation can ensure that all the signals of the closed‐loop system are globally bounded and the tracking error is prescribed sufficiently small when time is long enough. A practical example is given to illustrate the effectiveness of the proposed method.     

Fixed‐order robust H∞ control and control‐oriented uncertainty set shaping for systems with ellipsoidal parametric uncertainty

In this paper, sufficient conditions for robust output feedback controller design for systems with ellipsoidal parametric uncertainty are given in terms of solutions to a set of linear matrix inequalities. A polynomial method is employed to design a fixed‐order controller that assigns closed‐loop poles within a given region of the complex plane and that satisfies an H_∞ performance specification. The main feature of the proposed method is that it can be extended easily for control‐oriented uncertainty set shaping using a standard input design approach. Consequently, the results can be extended to joint robust control/input design procedure whose controller structure and performance specifications are translated into the requirements on the input signal spectrum used in system identification. This way, model uncertainty set can be tuned for the robust control design procedure. The simulation results show the effectiveness of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.     

Dynamic Surface Control of Constrained Hypersonic Flight Models with Parameter Estimation and Actuator Compensation

In this paper, the robust adaptive controller is investigated for the longitudinal dynamics of a generic hypersonic flight vehicle. The proposed methodology addresses the issue of controller design and stability analysis with respect to parametric model uncertainty and input saturations for the control‐oriented model. The velocity and attitude subsystems are transformed into the linearly parameterized form. Based on the parameter projection estimation, the dynamic inverse control is proposed via the back‐stepping scheme. In order to avoid the problem of “explosion of complexity,” by introducing a first‐order filtering of the synthetic input at each step, the dynamic surface control is designed. The closed‐loop system achieves uniform ultimately bounded stability. The compensation design is employed when the input saturations occur. Simulation results show that the proposed approach achieves good tracking performance.     

Decoupling Controller with Disturbance Observer for LTI MIMO Systems

In this paper, a decoupling multivariable control strategy for linear time‐invariant (LTI) multi‐input/multi‐output (MIMO) systems is proposed. The strategy includes a multivariable disturbance observer (MDOB) and a decoupling controller. This MDOB is introduced to improve the system performances when the system encounters severe external disturbances. H₂ optimal scheme is utilized to design the MDOB filter. The controller is developed based on an inverse control method, through which the design process can be simplified. Simulation results certify the effectiveness of the proposed control strategy.