Structural and performance properties of UV-assisted TiO2 deposited nano-composite PVDF/SPES membranes

In this research, the surface of poly (vinylidene fluoride) (PVDF)/sulfonated polyethersulfone (SPES) blend membrane prepared via immersion precipitation was modified by depositing of TiO₂ nano-particles followed by UV irradiation to activate their photocatalytic property. The membranes were characterized by FTIR, SEM, AFM, contact angle, dead end filtration (pure water flux and BSA solution flux), antifouling analysis and antibacterial activity. The FTIR spectrum confirmed the presence of OH functional groups on the PVDF/SPES membrane structure, which was the key factor for deposition, and self-assembly of TiO₂ nanoparticles on the membrane surface. The SEM and AFM images indicated that the TiO₂ nanoparticles were deposited on the PVDF/SPES membrane. The contact angle measurements showed that the hydrophilicity of PVDF/SPES membrane was strongly improved by TiO₂ deposition and UV irradiation. The filtration results indicated that the initial flux of TiO₂ deposited PVDF/SPES membranes was lower than the initial flux of neat PVDF/SPES membrane. However, the former membranes showed lower flux decline compared to the neat PVDF/SPES membrane. The BSA rejection of modified membranes was improved. The fouling analysis demonstrated that the TiO₂ deposited PVDF/SPES membranes showed the fewer tendencies to fouling. The results of antibacterial study showed that the UV irradiated TiO₂ deposited PVDF/SPES membranes possess high antibacterial property.     

Synthesis and Characterization of Polycarbonate/TiO2 Ultrafiltration Membranes: Critical Flux Determination

A novel polycarbonate (PC) membrane was modified with titanium dioxide via nonsolvent-induced phase separation method to improve its hydrophilicity and antifouling properties in a submerged membrane system for the removal of humic acid (HA) both with and without polyaluminum chloride (PAC) coagulant. The effect of TiO₂ additive on the morphology and performance of the nanocomposite membranes was studied by atomic force microscopy, field emission scanning electron microscopy, energy dispersive X-ray, mechanical properties, water contact angle, porosity, pure water flux, rejection tests, and antifouling parameters. The obtained results revealed that a higher critical flux was achieved by the PC/TiO₂ nanocomposite membrane. The flux recovery ratio of the neat PC membrane increased with the addition of TiO₂ nanoparticles and without PAC coagulant. HA removal for the PC nanocomposite membrane was higher than that of the neat PC membrane with and without PAC coagulant.     

Application of Colloidal Precipitation Method Using Sodium Polymethacrylate as Dispersant for TiO2/PVDF Membrane Preparation and Its Antifouling Properties

Immobilized titanium dioxide (TiO₂) nanoparticles on flat sheet polymeric membranes have been found effective for fouling reduction in recent researches. The main challenge in this field is to obtain ultrafine and stable nanodispersions. In this study, composite polyvinylidene fluoride/TiO₂ (PVDF/TiO₂) ultrafiltration membranes were prepared via phase inversion and colloidal precipitation method. Stable TiO₂ suspensions were prepared using sodium polymethacrylate as dispersant and sonication without altering of the coagulation bath pH. The effect of different concentrations of TiO₂ nanoparticles in the coagulation bath was also investigated. The membrane morphology (distribution of nanoparticles on the membrane surface) was observed by scanning electron and atomic force microscopy. Properties of the neat and the composite membranes were also characterized using energy dispersive X‐ray spectroscopy and contact angle and membrane porosity measurements. The neat and the composite membranes were further investigated in terms of bovine serum albumin rejection and flux decline in cross flow filtration experiments. The results showed that the PVDF/TiO₂ composite membrane using dimethylacetamide/triethyl phosphate as solvent and 0.05 g/L of TiO₂ in the coagulation bath exhibits improved antifouling properties. POLYM. ENG. SCI., 59:E422–E434, 2019. © 2018 Society of Plastics Engineers     

Preparation and characterization of antifouling poly(vinylidene fluoride) blended membranes

Poly(vinylidene fluoride) (PVDF) membranes have been widely used in microfiltration and ultrafiltration because of their excellent chemical resistance and thermal properties. However, PVDF membranes have exhibited severe membrane fouling because of their hydrophobic properties. In this study, we investigated the antifouling properties of PVDF blended membranes. Antifouling PVDF blended membranes were prepared with a PVDF‐g‐poly(ethylene glycol) methyl ether methacrylate (POEM) graft copolymer. The PVDF‐g‐POEM graft copolymer was synthesized by the atom transfer radical polymerization (ATRP) method. The chemical structure and properties of the synthesized PVDF‐g‐POEM graft copolymer were determined by NMR, Fourier transform infrared spectroscopy, and gel permeation chromatography. To investigate the antifouling properties of the membranes, we prepared microfiltration membranes by using the phase‐inversion method, which uses various PVDF/PVDF‐g‐POEM concentrations in dope solutions. The pure water permeabilities were obtained at various pressures. The PVDF/PVDF‐g‐POEM blended membranes exhibited no irreversible fouling in the dead‐end filtration of foulants, including bovine serum albumin, sodium alginate, and Escherichia coli broth. However, the hydrophobic PVDF membrane exhibited severe fouling in comparison with the PVDF/PVDF‐g‐POEM blended membranes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

PEG/GO/TiO2纳米复合材料改性PVDF膜的制备及其抗污性能

为改善聚偏氟乙烯(PVDF)膜的抗污性能,以聚乙二醇2000接枝的GO/TiO₂(PEG/GO/TiO₂)纳米复合材料为添加剂,通过非溶剂诱导沉淀相分离法制备了一系列PEG/GO/TiO₂/PVDF复合超滤膜。采用FTIR、SEM和接触角测试仪对其结构和形貌进行了表征,采用超滤法评价其纯水通量和抗污性能。结果表明,当PEG/GO/TiO₂纳米复合材料质量分数为0.60%时,制备的PEG/GO/TiO₂/PVDF复合超滤膜(记为0.60%PEG/GO/TiO₂/PVDF)表现出最佳的亲水性和抗污性能,其接触角比PVDF膜下降8.2°,总孔隙率增加13.40%,PEG/GO/TiO₂纳米复合材料在PVDF膜中分散较均匀。在0.08 MPa的工作压力下,0.60%PEG/GO/TiO₂/PVDF的纯水通量高达282.44 L/(m²·h),对腐植酸溶液的过滤通量为131.96 L/(m^2...     

Development of mesoporous titanium dioxide hybrid poly(vinylidene fluoride) ultrafiltration membranes with photocatalytic properties

A photocatalytic activity ultrafiltration membrane (UFM) was prepared by the blending of a poly(vinylidene fluoride) (PVDF) polymer with mesoporous titanium dioxide (M‐TiO₂) particles via the phase‐inversion method. The microstructure of the membrane and Ti element distribution were characterized by scanning electron microscopy and energy‐dispersive X‐ray spectroscopy. Their properties were also determined by thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, tensile stress tests, contact angle tests, bovine serum albumin retention, water flux, and permeation flux. When the M‐TiO₂ concentration reached 1 wt %, the thermal stability, mechanical properties, hydrophilicity, flux, and antifouling performance of the M‐TiO₂/PVDF UFM were improved to an optimal value with the M‐TiO₂ particles successfully entrapped and evenly distributed throughout the PVDF polymer matrix. Compared with the P25‐modified PVDF UFM (1 wt %), the M‐TiO₂‐modified PVDF UFM (1 wt %) exhibited better photocatalytic activity and wonderful stability in the UV photocatalytic degradation of the organic dye Rhodamine B. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43427.     

Nano SiO2 and TiO2 embedded polyacrylonitrile/polyvinylidene fluoride ultrafiltration membranes: Improvement in flux and antifouling properties

Polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN) ultrafiltration (UF) membranes are widely used in drinking water and wastewater applications. These membranes are prone to fouling and membrane efficiency decreases with time under constant operation. Significant improvements/modifications are necessary to apply these polymers as sustainable membrane materials. In this study, PVDF and PAN UF membranes were modified through incorporation of nanoparticles (NPs) namely SiO₂ and TiO₂. PVDF and PAN UF membranes were prepared by phase inversion method from polymer solutions having dispersed SiO₂ and TiO₂ NPs in it. Membrane surface hydrophilicity, charge, roughness, and morphology were studied. Equilibrium water content and molecular weight cut-off of the membranes were also measured. Addition of NPs increased membrane surface hydrophilicity, equilibrium water content, and surface potential. NPs modified membranes exhibited better membrane flux (35–79% higher) and antifouling properties (flux recovery ratio values 28–41% higher) than the virgin membranes.     

Improving the charged and antifouling properties of PVDF ultrafiltration membranes by blending with polymerized ionic liquid copolymer P(MMA‐b‐MEBIm‐Br)

This study describes the fabrication and properties of poly(vinylidene fluoride) (PVDF) filtration membranes modified by blending with ionic liquid block copolymer P(MMA‐b‐MEBIm‐Br), which is synthesized via reversible addition‐fragmentation chain transfer polymerization method. The attenuated total reflectance‐Fourier transform infrared spectroscopy and X‐ray photoelectron analyses reveal that the ionic liquid block copolymers are immobilized on PVDF membrane surface. The modified PVDF membrane exhibits excellent charged and antifouling properties because of the charged and hydrophilic properties of the copolymer. Scanning electron microscopy and atomic force microscopy also indicate the morphological characteristics of the membrane and demonstrate that the surface porous structure becomes denser after adding the copolymer. The data of filtration and the zeta potential of the membranes suggest that the charged properties of the ionic liquid block copolymers are mainly responsible for the improvement of the reversible fouling ratio and the decrease in the total fouling ratio of the membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44751.     

Poly(vinylidene fluoride) hollow‐fiber membranes containing silver/graphene oxide dope with excellent filtration performance

In this study, an antifouling poly(vinylidene fluoride) (PVDF) hollow‐fiber membrane was fabricated by blending with silver‐loaded graphene oxide via phase inversion through a dry‐jet, wet‐spinning technique. The presence of graphene oxide endowed the blended membrane with a high antifouling ability for organic fouling. The permeation fluxes of the blended membrane was 3.3 and 2.9 times higher than those of a pristine PVDF membrane for filtering feed water containing protein and normal organic matter, respectively. On the other hand, the presence of silver improved the antibiofouling capability of the blended membrane. For the treatment of Escherichia coli suspension, the permeation flux of the blended membranes was 8.2 times as high as that of the pristine PVDF membrane. Additionally, the presented blended membrane improved the hydrophilicity and mechanical strength compared to those of the pristine PVDF membrane, with the water contact angle decreasing from 86.1 to 62.5° and the tensile strength increasing from 1.94 to 2.13 MPa. This study opens an avenue for the fabrication of membranes with high permeabilities and antifouling abilities through the blending of graphene‐based materials for water treatment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44713.     

Enhancing antifouling performance of poly(l‐lactide) membranes by TiO2 nanoparticles

Poly(l ‐lactide) (PLLA)/TiO₂ composite membranes were fabricated by immersion precipitation method. The resulting membranes were characterized using various methods including XRD, ATR‐FTIR, TGA, DSC, SEM, goniometer, and molecular weight cut‐off. The antifouling performance of the membrane was investigated through the filtration experiments of the oil/water emulsion. XRD, SEM, and ATR‐FTIR results indicated that TiO₂ was successfully introduced into the membrane, while DSC and TGA indicated the enhancement of thermal stability of membrane. The improvement of membrane hydrophilicity was confirmed by goniometer. In addition, the pore size and porosity on the membrane surface varied obviously with increasing the TiO₂ loading. It was concluded that PLLA/TiO₂ composite membranes had better antifouling and recycling performance compared with the pure PLLA membrane. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43542.     

Preparation of PVDF/poly(tetrafluoroethylene‐co‐vinyl alcohol) blend membranes with antifouling propensities via nonsolvent induced phase separation method

Poly(vinylidene fluoride) (PVDF) was blended with a new amphiphilic copolymer, poly(tetrafluoroethylene‐co‐vinyl alcohol) [poly(TFE‐VA)], via non‐solvent induced phase separation (NIPS) method to make membranes with superior antifouling properties. The effects of the VA/TFE segment ratio of the copolymer and the copolymer/PVDF blend ratio on the properties of the prepared membranes were studied. Membranes with similar water permeabilities, surface pore sizes, and rejection properties were prepared and used in bovine serum albumin (BSA) filtrations with the same initial water flux and almost the same operating pressure, to evaluate the sole effect of membrane material on fouling propensity. While the VA/TFE segment ratio strongly affected the membrane antifouling properties, the effects of the copolymer/PVDF blending ratio were not so drastic. Membrane surface hydrophilicity increased, and BSA adsorption and fouling decreased upon blending a small amount of amphiphilic copolymer with a high VA/TFE segment ratio with PVDF (copolymer/PVDF blending ratio 1:5). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43780.     

Antifouling behaviour of PVDF/TiO2 composite membrane: a quantitative and qualitative assessment

The composite membranes of PVDF/TiO₂ were prepared by a phase-inversion technique. Different amounts of TiO₂ with respect to the weight of the polymer were incorporated in the casting solution to study qualitatively and quantitatively the antifouling property of the membrane. The membrane morphology was studied using a high-resolution scanning electron microscopy and atomic force microscopy, whereas the crystalline nature was studied using X-ray diffraction method. The interfacial interactions between foulants and TiO₂ immobilized membranes were also evaluated using the extended Derjaguin–Landau–Verwey–Overbeek (XDLVO) approach. The XDLVO theory revealed an increase in repulsive interactive energy barrier with an increase in TiO₂ loading, thus causing to improve the antifouling property of the membrane. Intercalation of TiO₂ nanoparticles efficiently improved the porosity and wettability of the polymeric membranes, which could be confirmed by the contact angle analyzer analysis. The modified PVDF membranes exhibited excellent antimicrobial properties against Gram-negative Escherichia coli as confirmed from the halo zone and activity test. The permeation experimental results also showed high protein rejection of bovine serum albumin and humic acid (foulant) for membranes with optimum TiO₂ loading of 0.01 g/g of PVDF polymer. However, at a concentration of 0.02 g TiO₂/g of PVDF a negative effect on the membrane property was observed due to the former non-uniform distribution.

     

Facile surface modification of PVDF microfiltration membrane by strong physical adsorption of amphiphilic copolymers

To endow the surface of poly(vinylidene fluoride) (PVDF) microfiltration (MF) membranes with hydrophilicity and antifouling property, physical adsorption of amphiphilic random copolymers of poly(ethylene glycol) methacrylate (PEGMA) and poly(methyl methacrylate) (PMMA) (P(PEGMA‐r‐MMA)) onto the PVDF membrane was performed. Scanning electron microscopy (SEM) images showed that the adsorption process had no influence on the membrane structure. Operation parameters including adsorption time, polymer concentration, and composition were explored in detail through X‐ray photoelectron spectroscopy (XPS), static water contact angle (CA), and water flux measurements. The results demonstrated that P(PEGMA‐r‐MMA) copolymers adsorbed successfully onto the membrane surface, and hydrophilicity of the PVDF MF membrane was greatly enhanced. The antifouling performance and adsorption stability were also characterized, respectively. It was notable that PVDF MF membranes modified by facile physical adsorption of P(PEGMA₅₈‐r‐MMA₃₃) even showed higher water flux and better antifouling property than the commercial hydrophilic PVDF MF membranes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3112–3121, 2013     

Morphological and separation performance study of polysulfone/titanium dioxide (PSF/TiO2) ultrafiltration membranes for humic acid removal

In this study, polysulfone (PSF) hollow fiber membranes with enhanced performance for humic acid removal were prepared from a dope solution containing PSF/DMAc/PVP/TiO₂. The main reason for adding titanium oxide during dope solution preparation was to enhance the antifouling properties of membranes prepared. In the spinning process, air gap distance was varied in order to produce different properties of the hollow fiber membranes. Characterizations were conducted to determine membrane properties such as pure water flux, molecular weight cut off (MWCO), humic acid (HA) rejection and resistance to fouling tendency. The results indicated that the pure water flux and MWCO of membranes increased with an increase in air gap distance while HA retention decreased significantly with increasing air gap. Due to this, it is found that the PSF/TiO₂ membrane spun at zero air gap was the best amongst the membranes produced and demonstrated > 90% HA rejection. Analytical results from FESEM and AFM also provided supporting evidence to the experimental results obtained. Based on the anti-fouling performance investigation, it was found that membranes with the addition of TiO₂ were excellent in mitigating fouling particularly in reducing the fouling resistances due to concentration polarization, cake layer formation and absorption.     

Effect of calcination temperature of TiO2 on the crystallinity and the permittivity of PVDF‐TrFE/TiO2 composites

Composite membranes of poly(vinylidene‐trifluoroethylene)/titanium dioxide (PVDF‐TrFE/TiO₂) were prepared by the solution cast method. The crystallization behavior and dielectric properties of the composites with TiO₂ calcined at different temperatures were studied. Transmission electron microscopy and X‐ray diffraction (XRD) results showed that the TiO₂ nanoparticles calcined at different temperatures were well dispersed in the polymer matrix and did not affect the structure of the PVDF‐TrFE matrix. XRD and differential scanning calorimeter measurements showed that the crystallinity of PVDF‐TrFE/TiO₂ composites increased as the addition of TiO₂ with different calcination temperatures. The dielectric property testing showed that the permittivity of PVDF‐TrFE/TiO₂ membrane increased rapidly with the increase of TiO₂ content and the calcination temperature of TiO₂ at constant TiO₂ content, but the dielectric loss did not change much. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(arylene sulfide sulfone) hybrid ultrafiltration membrane with TiO2‐g‐PAA nanoparticles: Preparation and antifouling performance

Poly(arylene sulfide sulfone) (PASS) is a kind of newly developed polymeric membrane material which has excellent mechanical strength, thermal stability, and solvent resistance. And, it would be a potential material for high temperature ultrafiltration and organic solvent filtration. In this article, PASS hybrid ultrafiltration membrane with improved antifouling property was prepared by mixing TiO₂ nanoparticles which were grafted with polyacrylic acid (PAA). These membranes were prepared by a phase inversion technique and their separation performance and antifouling property of the prepared membranes were investigated in detail by SEM, FTIR, EDS, contact angle goniometry, filtration experiments of water, and BSA solution. The results shown that the TiO₂‐g‐PAA nanoparticles dispersed well in membrane matrix, the hydrophilicity of the membranes prepared within TiO₂‐g‐PAA nanoparticles have been improved and these membranes exhibited excellent water flux and antifouling performance in separation than that of the pure PASS membranes and PASS membranes with TiO₂ nanoparticles. More specifically, among membrane sample M0, M1.5, and MP1.5, MP1.5 which contained 1.5 wt% TiO₂‐g‐PAA exhibited the highest water permeation (190.4 L/m² h at 100 kPa), flux recovery ratio, and the lowest BSA adsorption amount. POLYM. ENG. SCI., 55:2829–2837, 2015. © 2015 Society of Plastics Engineers     

Preparation and properties of hydrophobic poly(vinylidene fluoride)–SiO2 mixed matrix membranes for dissolved oxygen removal from water

The application of the membrane method for removing dissolved oxygen (DO) from water on the laboratory scale was studied. Flat mixed matrix membranes were composed of poly(vinylidene fluoride) (PVDF) and hydrophobic nanosilica particles, which were used to improve the DO removal process. The SiO₂ particles were modified by a silane coupling agent and examined by Fourier transform infrared spectroscopy. It was shown that the surface of the SiO₂ particles was bonded to hydrophobic long‐chain alkane groups through chemical bonding. The effects of adding SiO₂ particles on the membrane properties and morphology were examined. The results show that the porosity and pore size of the membrane were affected by the introduction of SiO₂ particles, and the cross‐sectional morphology of the PVDF composite membranes changed from fingerlike macrovoids to a spongelike structure. The membrane performance of DO removal was evaluated through the membrane unit by a vacuum degassing process. It was found that the SiO₂/PVDF hybrid membranes effectively improved the oxygen removal efficiency compared with the original PVDF membranes. The maximum permeation flux was obtained when the loading amount was 2.5 wt %. The effect of the downstream vacuum level was also investigated. The experimental results show that the SiO₂/PVDF hybrid membranes had superior performances and could be an alternative membrane for removing DO from water. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40430.     

Electrospun fiber membranes from blends of poly(vinylidene fluoride) with fouling‐resistant zwitterionic copolymers

Nonwoven super‐hydrophobic fiber membranes have potential applications in oil–water separation and membrane distillation, but fouling negatively impacts both applications. Membranes were prepared from blends comprising poly(vinylidene fluoride) (PVDF) and random zwitterionic copolymers of poly(methyl methacrylate) (PMMA) with sulfobetaine methacrylate (SBMA) or with sulfobetaine‐2‐vinylpyridine (SB2VP). PVDF imparts mechanical strength to the membrane, while the copolymers enhance fouling resistance. Blend composition was varied by controlling the PVDF‐to‐copolymer ratio. Nonwoven fiber membranes were obtained by electrospinning solutions of PVDF and the copolymers in a mixed solvent of N,N‐dimethylacetamide and acetone. The PVDF crystal phases and crystallinities of the blends were studied using wide‐angle X‐ray diffraction and differential scanning calorimetry (DSC). PVDF crystallized preferentially into its polar β‐phase, though its degree of crystallinity was reduced with increased addition of the random copolymers. Thermogravimetry (TG) showed that the degradation temperatures varied systematically with blend composition. PVDF blends with either copolymer showed significant increase of fouling resistance. Membranes prepared from blends containing 10% P(MMA‐ran‐SB2VP) had the highest fouling resistance, with a fivefold decrease in protein adsorption on the surface, compared to homopolymer PVDF. They also exhibited higher pure water flux, and better oil removal in oil–water separation experiments. © 2018 Society of Chemical Industry     

Effective incorporation of TiO2 nanoparticles into polyamide thin‐film composite membranes

The effectiveness of TiO₂ nanoparticles in improving the performance of polyamide (PA) thin‐film composite (TFC) membranes has been investigated. PA TFC membranes were prepared by interfacial polymerization with m‐phenylenediamine (MPD) and 1,3,5‐benzene tricarbonyl trichloride (TMC) where TiO₂ particles were added during and after interfacial polymerization. To distribute the TiO₂ nanoparticles uniformly in the PA films, colloidally stable TiO₂ sols were synthesized and added to the aqueous MPD solution rather than to an organic TMC solution. Through the use of different incorporation methods, TiO₂ particles were located on the top surface, in PA film layer, and in both positions. In the case of dense PA layers, the hydrophilicity of the membranes was significantly improved due to the presence of TiO₂ particles, resulting in an increased water flux. On the other hand, the enhancement of water flux was less significant when TiO₂ particles were incorporated into a loose PA film that was prepared with additives. In addition, a BSA fouling test confirmed that TiO₂ nanoparticles effectively improve the antifouling properties of the membranes for both dense and loose PA films. This effect is possibly due to increased hydrophilicity, covering of the fouling space, and a reduction in surface roughness. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43383.     

Morphologies and properties of poly(phthalazinone ether sulfone ketone) matrix ultrafiltration membranes with entrapped TiO2 nanoparticles

Poly(phthalazine ether sulfone ketone) (PPESK) is a newly developed membrane material with superior thermal stability and comprehensive properties. Titanium dioxide (TiO₂)‐entrapped PPESK ultrafiltration (UF) membranes were formed by dispersing uniformly nanosized TiO₂ particles in the casting solutions. Initially, the inorganic nanoparticles were organically modified with silane couple reagent to overcome the aggregation and to improve the dispersibility in organic solvent. The membranes were prepared through the traditional phase inversion method. The effects of inorganic TiO₂ nanoparticles on the membrane surface morphology and cross section structure were investigated using scanning electronic microscopy (SEM) and atomic force microscopy (AFM). Water contact angle (CA) measurement was conducted to investigate the hydrophilicity and surface wettability of the membranes. The influence of TiO₂ on the permeability, antifouling, and tensile mechanical properties of the PPESK membranes were evaluated by UF experiments and tensile tests. The experimental results showed that the obtained TiO₂‐entrapped PPESK UF membranes exhibit remarkable improvement in the antifouling and mechanical properties because of the introduction of TiO₂ nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3623–3629, 2007