Molecularly imprinted polymers for the selective recognition of l‐phenylalanine based on 1‐buty‐3‐methylimidazolium ionic liquid

To enhance the affinity of 4‐vinyl pyridine to l ‐phenylalanine (l ‐Phe) and convert the imprinting process from the aqueous phase to the organic phase, an oil‐soluble amino acid ionic liquid was introduced as a template. In this study, 1‐butyl‐3‐methylimidazolium α‐aminohydrocinnamic acid salt was first applied to prepared surface molecularly imprinted polymers (MIPs) in acetonitrile for the selective recognition of l ‐Phe. Fluorescence quenching analysis of the functional monomer on the template was investigated under different conditions to study the imprinting mechanism. Several binding studies, such as the sorption kinetics, sorption thermodynamics, and solid‐phase extraction application, and the chiral resolution of racemic phenylalanine were investigated. The binding isotherms were fitted by nonlinear regression to the Freundlich model to investigate the recognition mechanism. The affinity distribution analysis revealed that polymers imprinted by ionic liquid showed higher homogeneous binding sites than those imprinted by l ‐Phe. The competition tests were conducted by a molecularly imprinting solid‐phase extraction procedure to estimate the selective separation properties of the MIPs for l ‐Phe. The target MIP was shown to be successfully for the separation of l ‐Phe from an amino acid mixture. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42485.     

Synthesis and optimization of molecularly imprinted polymers for quercetin

Molecularly imprinted polymers (MIPs) were synthesized through solution polymerization using quercetin as the template molecule, N‐vinylpyrrolidone and acrylic acid as functional monomers, N,N′‐methylenebiacrylamide as crosslinker and the redox system L ‐ascorbic acid and hydrogen peroxide as initiator in the porogen of ethanol and water. During the optimization process an interference compound, genistein (5,7,4′‐trihydroxy isoflavone), which possesses the same skeleton and functional groups as quercetin, was adopted to optimize the preparation conditions, and the separation degree of the MIP to quercetin and genistein was chosen to optimize each factor. The synthesized MIP under optimal conditions showed a specific recognition of quercetin from a mixture of quercetin and genistein. Thereafter, the structure of the MIP was comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and Brunauer–Emmett–Teller analysis using non‐imprinted molecular polymers as control. In addition, the kinetics of the adsorption process were also studied, and Scatchard analysis revealed that heterogeneous binding sites were formed in the polymers. Copyright © 2012 Society of Chemical Industry     

Ultrasonication‐assisted synthesis of molecularly imprinted polymer‐encapsulated magnetic nanoparticles for rapid and selective removal of 17β‐estradiol from aqueous environment

Molecularly imprinting technique was combined with magnetic nanoparticles to synthesize molecularly imprinted polymer‐encapsulated particles for selective removal and efficient separation of estrogenic compounds from water. The core‐shell‐structured particles were successfully prepared by a novel 2‐h ultrasonication‐assisted synthesis in a mixture of water and organic solvent using dual‐layer surfactant‐modified magnetic particles as core, the most physiologically active estrogenic compound (17β‐estradiol) as template, and widely adapted methacrylic acid as functional monomer. Ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and magnetic separation were used to characterize the particles. High‐performance liquid chromatography–tandem mass spectrometry was used for quantitative binding performance analysis at low‐nanogram per milliliter levels. The particles exhibited satisfactory recognition of 17β‐estradiol in water. They possessed great potential for rapid, cost‐effective, and efficient separation of estrogenic compounds from aqueous environment with specificity. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Molecularly imprinted nanoparticles prepared by core‐shell emulsion polymerization

Submicron core‐shell polymer particles, with molecularly imprinted shells, were prepared by a two‐stage polymerization process. Particles of this type, prepared with a cholesterol‐imprinted ethyleneglycol dimethacrylate shell and in the absence of porogen, were found to be 76 nm in diameter with a surface area of 82 m² g⁻¹. Cholesterol uptake from a 1 mM solution in isohexane was measured at both 10 and 30 mg mL⁻¹, with the imprinted polymer showing considerable binding (up to 57%). Imprinted but not hydrolyzed and hydrolyzed nonimprinted polymers showed very low uptakes (≤4.5%) and a phenol‐imprinted polymer showed reduced binding (36%) under the same conditions. Imprinted shells were also prepared over superparamagnetic polymer cores and over magnetite ferrocolloid alone. The cholesterol binding to magnetic particles was very similar to that of equivalent nonmagnetic materials. Magnetic particles could be sedimented in as little as 30 s in a magnetic field. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1851–1859, 2000     

Side chain functionality dominated the chromatography of N‐protected amino acid on molecularly imprinted polymer

Molecularly imprinted polymer (MIP) with N^α‐protected amino acid as the print molecule was prepared and used as the stationary phase for the chromatographic study of molecular recognition. Particles of MIP were prepared by photopolymerization of 4‐vinylpyridine in the presence of tert‐butyloxycarbonyl‐L ‐tyrosine (Boc‐L ‐Tyr) and packed into a column for the chromatographic resolution of Boc‐L ‐Tyr and tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐L ‐Phe). These two N^α‐protected amino acids that differ from each other in the side chain with one hydroxyl group on the benzene ring could be well separated on the MIP. A separation factor of about two was achieved by using a mixture of acetonitrile (99.5 v/v %) and acetic acid (0.5 v/v %) as the mobile phase. Results suggest that the interaction between hydroxyl group in the side chain of amino acid and pyridine in the polymer dominated the selective adsorption of print molecule on the MIP. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Fabrication and properties of core‐shell structure P(LLA‐CL) nanofibers by coaxial electrospinning

In this article, core‐shell structure nanofibers were fabricated by coaxial electrospinning with biodegradable copolymer Poly(L ‐Lactic‐ε‐Caprolactone) [P(LLA‐CL) 50 : 50] as shell and bovine serum albumin (BSA) as core. Morphology and microstructure of the nanofibers were characterized by scanning electron microscopy and transmission electron microscopy. The mechanical properties were investigated by stress‐strain tests. In vitro degradation rates of the nanofibrous membranes were determined by measuring their weight loss when immersed in phosphate‐buffered saline (pH 7.4) for a maximum of 14 days. Release behavior of BSA was measured by an ultraviolet‐visible spectroscopy, and the results demonstrated that BSA could release from P(LLA‐CL) nanofibers in a steady manner. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of molecularly imprinted polymers in supercritical carbon dioxide

Molecularly imprinted polymer nanoparticles were prepared in supercritical carbon dioxide using a noncovalent imprinting approach. In the present work, propranolol was used as a model template, methacrylic acid as a functional monomer, and divinylbenzene as a crosslinker. Under a high dilution condition, the heterogeneous polymerization resulted in discrete crosslinked polymer nanoparticles. Compared with the nonimprinted polymers, the imprinted nanoparticles displayed much higher propranolol uptake in a low polarity organic solvent. The use of a single enantiomer (S)‐propranolol as the template clearly demonstrated that the imprinted binding sites are chiral‐selective, with a cross‐reactivity towards (R)‐propranolol of less than 5%. The overall binding performance of the imprinted nanoparticles was comparable to imprinted polymers prepared in conventional organic solvents. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2863–2867, 2006     

Preparation and characterization of core‐shell nanoparticles containing poly(chlorotrifluoroethylene‐co‐ethylvinylether) as core

Core shell latex particles with a glassy core and a low T_g polymeric shell are usually preferred. More so, the glassy core happens to be a fluoropolymer with a shell polymer that helps in processability. We describe here the preparation and characterization of core shell nanoparticles consisting of poly(chlorotrifluoroethylene‐co‐ethylvinylether) as core encapsulated in poly(styrene‐acrylate) copolymer shell using seeded emulsion polymerization method under kinetically controlled monomer starved conditions. Properties of the emulsion using surfactants (fluoro/conventional) and surfactant free conditions were investigated. Average size (100 nm), spherical shape and core–shell morphology of the latex particles was confirmed by dynamic light scattering and transmission electron microscopy. Absence of C? F and C? Cl peaks in X‐ray photoelectron spectroscopy proves that cores are completely covered. Polymerization in the presence of fluorocarbon surfactant was found to give optimum features like narrow size distribution, good shell deposition and no traces of agglomeration. Films of core shell latex particles exhibited improved transparency and enhanced water contact angles thus making them suitable for applications in various fields including coatings. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Alternative molecularly imprinted membranes from a derivative of natural polymer,cellulose acetate

Molecularly imprinted polymeric membranes were prepared from cellulose acetate (CA), of which acetyl content was 40%, by applying the alternative molecular imprinting technique. The Z‐d ‐Glu imprinted polymeric membranes thus obtained recognized d ‐Glu in preference to l ‐Glu from racemic Glu mixtures and vice versa. The affinity constants between Glu and the chiral recognition site for two kinds of membranes were determined to be 3.1 × 10³ mol⁻¹ dm³ from the adsorption isotherm of d ‐Glu or L ‐Glu in the molecularly imprinted CA membranes. Enantioselective electrodialysis was attained with the present membranes reflecting their adsorption selectivity. d ‐Glu was preferentially permeated through the Z‐d ‐Glu imprinted CA membrane, whereas L ‐Glu was permeated through the Z‐L ‐Glu imprinted CA membrane. The present study suggests that the molecularly imprinted CA membranes are applicable to the optical resolution of racemic amino acids. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 493–499, 1999     

Transport selectivity of tribenuron‐methyl imprinted polymer nanowire membrane prepared using N,O‐bismethacryloyl ethanolamine as a functional crosslinking monomer

Using tribenuron‐methyl as a template and N,O‐bismethacryloyl ethanolamine as a functional crosslinking monomer, a molecularly imprinted nanowire membrane was prepared over an anodic alumina oxide membrane. The nanowire fabric of the imprinted membrane was established with a scanning electron microscope and a transmission electron microscope. However, the nonimprinted particulate membrane is formed in the absence of a template. Scatchard analysis showed that an equal class of binding sites were formed in the imprinted nanowire membrane and the dissociation constant and the maximum number of these binding sites were estimated to be 1.44 × 10⁻⁵ M and 22.7 µmol/g, respectively. The permeation experiments throughout the imprinted membrane and the nonimprinted one were carried out in a solution containing the template and its competitive analogs. These results demonstrated that the molecularly imprinted nanowire membrane exhibited higher transport selectivity for the template tribenuron‐methyl than its analogs, chlorimuron‐ethyl, thifensulfuron‐methyl and N‐(4‐bromophenylcarbamoyl)‐5‐chloro‐1H‐benzo[d]imidazole‐2‐carboxamide. But the nonimprinted granular membrane had no permselectivity for the four substrates. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

3,3′‐Diindolylmethane imprinted polymers: synthesis,characterization and analytical procedure for template isolation from biological matrix

A novel sorbent for the separation of 3,3′‐diindolylmethane (DIM) has been developed. DIM was used as a template molecule to prepare twelve imprinted polymers from seven different functional monomers in six various porogens in the presence of ethylene glycol dimethacrylate as a crosslinker. The binding capacity showed that the highest binding specificity was achieved when allylamine as the monomer and carbon tetrachloride as the porogen were used to form bulk polymers. Binding capacities were 130.4 ± 2.8 µg g^?1 for imprinted MIP7_a polymer versus 49.03 ± 0.44 µg g^?1 for non‐imprinted NIP7_a polymer. An imprinting factor of 3.12 reflected the high specificity of MIP7_a. A solid‐phase extraction protocol was fully optimized. Two methanol–water systems were selected as the most effective for loading and washing steps, while acetonitrile was chosen as the most efficient eluent suitable for recovery of 91.7 ± 3.8% of DIM. Optimal concentration of DIM and volume of loaded sample were also examined. A loaded volume of 2.5 mL was the most appropriate for 0.625 and 1.25 mg L^?1. The use of MIP7_a for the separations of DIM from spiked bovine serum albumin was evaluated, showing a total recovery of 87.7 ± 3.5%. The commercial sorbent C18 was not suitable for such an application. © 2013 Society of Chemical Industry     

Computer simulation and synthesis of stimuli‐responsive polymer by sol‐gel for selective recognition of (4‐chloro‐2‐methylphenoxy)acetic acid

A novel photoresponsive functional monomer bearing a siloxane polymerizable group and azobenzene moieties was synthesized, and then photoresponsive molecularly imprinted sol‐gel polymers were successfully fabricated from the synthesized functional monomer, using (4‐chloro‐2‐methylphenoxy)acetic acid (MCPA) as a molecular template. The photoisomerization properties of the functional monomer are retained after incorporation into the rigid three‐dimensional crosslinked polymer matrix. The template is then removed from the resulting polymer to generate pores, which are complementary to the template in shape, size and functionality. The substrate affinity of the molecularly imprinted polymer (MIP) receptor sites is photoswitchable. This can be attributed to the photoisomerization of azobenzene chromophores within the MIP receptors, resulting in alteration of their geometry and the spatial arrangement of their binding functionalities. The binding affinity of the imprinted recognition sites was switchable by alternate irradiation with UV and visible light, suggesting that azobenzene groups located inside the binding sites could be used as chemical sensors and the trans–cis isomerization could regulate the affinity for MCPA. To study the hydrogen bond interactions between template molecules and functional monomer, computational molecular modeling was employed. The data indicate that the design of the MIP is rational. Copyright © 2012 Society of Chemical Industry     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Latex‐templated biomineralization of silica nanoparticles with porous shell and their application for drug delivery

A latex‐templating method for synthesizing the core‐shell silica nanoparticles (NPs) with porous shell was developed via biomineralization in the presence of poly[2‐(methacryloyloxy)ethyl] trimethylammonium chloride (pDMC)‐modified polystyrene latex. Calcination of the as‐obtained SiO₂ NPs led to the removal of the latex core and consequently to hollow silica NPs with porous shell. In particularly, the microstructure and thickness of silica shell could be controlled by simply changing the reaction parameters of silicification. Furthermore, facile encapsulation of a drug molecules and its sustained release were demonstrated. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44200.     

Sol–gel process of alkoxysilane in emulsifier‐involved aqueous emulsions: A one‐pot synthetic route to emulsions of core‐shell composite particles and their applications

In this work, a one‐pot route to prepare emulsions of silica/polymer core‐shell composite particles was developed through the direct sol–gel processing of alkoxysilane on the surface of newly synthesized template polymer particles in emulsifier‐involved aqueous emulsions. It included two continuous steps: first, the polymer emulsions were synthesized through emulsion polymerization, and second, the template particles in the emulsions were directly coated with silica via sol–gel reaction of precursors without adding ethanol or removing emulsifiers. The size and morphology of the composite particles were characterized, and the results showed that the silica/polymer composite particles with core‐shell structure could be prepared only on the basis of cationic template emulsions, and the in situ‐coating reaction of sol–gel precursors carried on easier with the increasing of the positive charge density on the surface of template particles. The films formed from the composite emulsions were found to have superior optical and flame‐retardant properties compared to polymer films, owing to the core‐shell composite microstructure of the particles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and properties of core [poly(styrene‐n‐butyl acrylate)]–shell [poly(styrene–methyl methacrylate–vinyl triethoxide silane)] structured latex particles with self‐crosslinking characteristics

Structured latex particles with a slightly crosslinked poly(styrene‐n‐butyl acrylate) (PSB) core and a poly(styrene–methacrylate–vinyl triethoxide silane) (PSMV) shell were prepared by seed emulsion polymerization, and the latex particle structures were investigated with Fourier transform infrared, thermogravimetric analysis, differential scanning calorimetry, transmission electron microscopy, and dynamic light scattering. The films that were formed from the structured core (PSB)–shell (PSMV) particles under ambient conditions had good water repellency and good tensile strength in comparison with films from structured core (PSB)–shell [poly(styrene–methyl methyacrylate)] latex particles; this was attributed to the self‐crosslinking of CH₂?CH? Si(OCH₂CH₃)₃ in the outer shell structure. The relationship between the particle structure and the film properties was also investigated in this work. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1824–1830, 2006     

Synthesis and analysis of properties of a new core–shell silicon‐containing fluoroacrylate latex

BACKGROUND: Silicon‐containing fluoroacrylate copolymers are potential materials for use in the protection of ancient stone buildings. In the work reported in this paper, a new core–shell silicon‐containing fluoroacrylate latex was prepared through grafting of a fluoroacrylate copolymer latex with polysiloxane. RESULTS: The core–shell silicon‐containing fluoroacrylate latex was successfully synthesized by seed emulsion polymerization and octamethylcyclotetrasiloxane (D₄) ring‐opening polymerization in the presence of a mixed emulsifier consisting of a non‐ionic emulsifier and a novel fluorine‐containing anionic emulsifier sodium perfluoro‐octane sulfonate. Transmission electron microscopy, X‐ray photoelectron spectroscopy, static contact angle measurements and scanning electron microscopy‐energy dispersive X‐ray analysis showed that when the D₄ content was controlled at 2.84–4.36 wt%, the silicon‐containing fluoroacrylate latex presented a uniform sphere core‐shell structure and had strong hydrophobic and oleophobic characters due to the association of both fluorine and silicon atoms on the latex film surface. The film cross‐section exhibited uniform and dense microstructure without any phase segregation. Additionally, thermogravimetric analysis and tensile test results indicated that all the silicon‐containing fluoroacrylate copolymers displayed better thermal stability and higher flexibility. CONCLUSION: The synthetic core–shell silicon‐containing fluoroacrylate latex showed excellent surface properties, thermal stability and flexibility, and has encouraging prospects in application as a protective coating. Copyright © 2009 Society of Chemical Industry     

Production of double‐walled nanoparticles containing meloxicam

Double‐walled nanospheres, containing meloxicam, were fabricated with poly‐(D,L ‐lactide‐co‐glycolide) (PLGA) and poly(L ‐lactide) (PLLA) using the solvent evaporation technique. This article discusses the effect of formulation variables [sonication power, sonication time, concentration of poly(vinyl alcohol), organic/aqueous volume ratio in the first emulsion] on the production of double‐walled nanospheres. The involved phase separation of these two polymers was investigated using differential scanning calorimetry. Double‐walled microspheres containing meloxicam were also produced to determine the composition of the shell and core polymer, based on different solubilities of polymers in ethyl acetate, and to examine the inner morphology and drug distribution using optical and fluorescence microscopy. The produced microparticles have shown a double‐walled structure with meloxicam solubilized in the PLGA‐rich phase. Therefore, adjusting the selected formulation variables and using a mass ratio of 1:1 PLLA/PLGA, double‐walled nanospheres where meloxicam is dispersed within the core can be produced. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Evaluation of aminoquinoline‐imprinted polymers and the recognition mechanism

Three molecularly imprinted polymers P(2‐AQ), P(3‐AQ), and P(8‐AQ) based on methacrylic acid (MAA)–ethylene glycol dimethacrylate were prepared using isomers 2‐aminoquinoline (2‐AQ), 3‐aminoquinoline (3‐AQ), and 8‐aminoquinoline (8‐AQ) as template, respectively, by non‐covalent bulk polymerization technique. Neither P(3‐AQ) nor P(8‐AQ) exhibited imprinting effect for 3‐AQ or 8‐AQ, whereas P(2‐AQ) showed significant imprinting effect for 2‐AQ. This indicates that the position of amino group on the quinoline ring has crucial influence on imprinting effect. The recognition mechanism of P(2‐AQ) was investigated extensively by such methods as selective experiments, comparative study with 2‐aminopyridine‐imprinted polymer, and effect of different kinds of mobile phases. It is confirmed that there are complementary cavities in P(2‐AQ) both in size and in the arrangement of functional groups to 2‐AQ, and MAA binds 2‐AQ via cyclic hydrogen bond. Furthermore, the influence of synthetic conditions on 2‐AQ‐imprinted polymers was explored. We found 2‐AQ‐imprinted polymer synthesized in acetonitrile porogen showed higher imprinting effect for 2‐AQ than that prepared in chloroform. It is deduced that the morphology of the former might be more favorable to 2‐AQ binding, which is also supported indirectly by the fluorimetric experiments estimating the interaction of 2‐AQ with MAA in these two porogens. Additionally, 2‐AQ‐imprinted polymers prepared using two different amounts of acetonitrile exhibited very different imprinting effects, which suggested that porogen amount used in the imprinting process exerted significant influence. In addition to the in‐depth elucidation of the recognition mechanism of 2‐AQ‐imprinted polymer, this article provides the basis for the separation and enrichment of bioactive 2‐AQ. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Iterative One‐Pot α‐Glycosylation Strategy: Application to Oligosaccharide Synthesis

Based on the combined use of dimethylformamide (DMF) modulation and neighboring group participation, three iterative one‐pot α‐glycosylation methods, i.e., one‐pot (α,α)‐, one‐pot (β,α)‐, and one‐pot (α,β)‐glycosylations, were developed. These methods are applicable to a range of thioglycosyl donors, confer stereocontrol in α‐/β‐glycosidic bond formation, and thus provide for rapid access to oligosaccharides with various permutations of anomeric configurations. The utility of these one‐pot glycosylation methods is demonstrated in the synthesis of eight non‐natural and natural oligosaccharide targets, including the core 1 serine conjugate, core 8 serine conjugate, the D ‐Gal‐α(1→3)‐D ‐Glc‐α(1→3)‐L ‐Rha trisaccharide unit of the cell wall component in Streptococcus pneumoniae, and the D ‐Glc‐α(1→2)‐D ‐Glc‐α(1→3)‐D ‐Glc trisaccharide terminus of the N‐linked glycan precursor. Confirmation of the anomeric configurations of these oligosaccharides is evidenced by ¹H, ¹³C, ¹³C‐non‐proton decoupling, and heteronuclear correlation 2D NMR experiments. Global deprotection of selected oligosaccharide targets is illustrated.