Preparation and characterization of PAM/SA tough hydrogels reinforced by IPN technique based on covalent/ionic crosslinking

In order to fabricate tough hydrogels with superior formability, polyacrylamide/sodium alginate (PAM/SA) interpenetrating polymer network (IPN) hydrogels were produced with ionically crosslinked SA interpenetrated in covalently crosslinked PAM. TGA results show that the heat resistance of PAM/SA IPN hydrogel is improved as compared to that of the individual component. Swelling studies indicate that increasing either chemical crosslinker content or ionic crosslinking via adding more N,N′‐methylenebisacrylamide (MBA) or SA results in lower ESR. It is concluded by tensile test that loosely crosslinked PAM coupled with tightly crosslinked SA improve mechanical strength for hydrogels based on covalent/ionic crosslinking. PAM/SA hydrogels via “one‐pot” method can form different complex shapes with mechanical properties comparable to conventional double network (DN) gels. The fracture strength of PAM_0.05/SA₂₀ reaches level of MPa, approaching 2.0 MPa. The work strives to provide method to tune mechanical and physical properties for hydrogels, which is hopefully to guide the design of hydrogel material with desirable properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41342.     

Characterization of hydrogels based on chitosan and copolymer of poly(dimethylsiloxane) and poly(vinyl alcohol)

Copolymers composed of poly(vinyl alcohol) (PVA) and poly(dimethylsiloxane) (PDMS) were crosslinked with chitosan to prepare semi‐interpenetrating polymer network (IPN) hydrogels by an ultraviolet (UV) irradiation method for application as potential biomedical materials. PVA/PDMS copolymer and chitosan was cast to prepare hydrogel films, followed by a subsequent crosslinking with 2,2‐dimethoxy‐2‐phenylacetophenone as a nontoxic photoinitiator by UV irradiation. Various semi‐interpenetrating polymer networks (semi‐IPNs) were prepared from different weight ratios of chitosan and the copolymer of PVA/PDMS. Photocrosslinked hydrogels exhibited an equilibrium water content (EWC) in the range of 65–95%. Swelling behaviors of these hydrogels were studied by immersion of the gels in various buffer solutions. Particularly, the PCN13 as the highest chitosan weight ratio in semi‐IPN hydrogels showed the highest EWC in time‐dependent and pH‐dependent swelling. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2591–2596, 2002     

pH-/temperature-sensitive carboxymethyl chitosan/poly(N-isopropylacrylamide-co-methacrylic acid) IPN: preparation,characterization and sustained release of riboflavin

Dual crosslinked pH-/temperature-sensitive interpenetrating polymer networks (IPN) were prepared by free-radical copolymerization of N-isopropylacrylamide and methylacrylic acid (MAA) using N,N′-methylenebisacrylamide as a crosslinker in carboxymethyl chitosan (which was crosslinked by Ca²⁺) aqueous solution. Scanning electron microscopy was used to observe the morphologies of the IPN at different pH values and temperatures. The effects of MAA content and environmental pH on the “pH-/temperature-induced” phase transition behavior of the IPN hydrogels were investigated. The phase transition temperature was adjusted to 37 °C by changing the MAA content. The effects of drug-loaded content, crosslinking density, environmental pH, and temperature on the drug release behavior of the drug-loaded IPN hydrogel were also explored. Based on results, the hydrogel possessed pH/temperature sensitivity. The swelling ratio and phase translation temperature of the hydrogel were lower at lower pH. These values were lowest at pH 3.0. The release behavior of riboflavin was dependent on preparation condition, environmental pH, and temperature. Drug cumulative release was only 6 % at pH 1.8 for 2 h. The drug cumulative release was 13 % before the drug-loaded hydrogel reached the position with pH 6.8. The drug release rate was higher at lower temperature. Therefore, dual-crosslinked hydrogel holds much potential as a drug site-specific carrier.     

Fabrication of interpenetrating polymer network to enhance the biological activity of synthetic hydrogels

A three dimensional porous hydrogel with suitable biological and mechanical properties are required for bone tissue engineering. Hydrogels of poly(lactic-ethylene oxide fumarate) (PLEOF), crosslinked with poly(ethylene glycol)-diacrylate (PEG-da) have desirable mechanical properties, however, their application for bone regeneration is limited due to the lack of cell motif sites within their structure. The aim of this study was to incorporate a naturally derived polymer such as gelatin into PLEOF hydrogels to promote their biological properties. Interpenetrating polymer network (IPN) was used as an efficient technique to acquire uniform mixture of these two polymers. Additionally gas foaming agents were used to create pores with average diameter of 250 μm in these IPN hydrogels. The concentrations of PEG-da and gelatin were optimized to tune the mechanical strength and degradation properties of these hydrogels. A compression modulus of 500 kPa was achieved for hydrogel fabricated with 400 mg/ml PLEOF, 200 mg/ml PEG-da and 150 mg/ml gelatin. The addition of gelatin to PLEOF elevated the compression modulus by two-fold and decreased the energy loss by 40%. The result of protein analysis demonstrated that IPN substantially enhanced the retention of physically crosslinked gelatin in the 3D structure of hydrogel. More than 50% of gelatin was retained in IPN hydrogel after two weeks of incubation in simulated physiological environment. Preserving gelatin in the hydrogel structure provides cell motif sites for a longer period of time, which is desirable for uniform cell proliferation. In vitro studies showed that primary human osteoblast cells adhered and proliferated in PLEOF-gelatin hydrogel. These results demonstrated the potential of using this IPN hydrogel for bone tissue engineering.     

Polyampholytic hydrogels: Poly(N-isopropylacrylamide)-based stimuli-responsive networks with poly(ethyleneimine)

Polyampholytic hydrogels are crosslinked networks composed of positively and negatively charged repeat units that show entirely different properties from their originate polyelectrolyte polymers. Here we report a series of stimuli-responsive polyampholytic hydrogels designed with poly(N-isopropylacrylamide-co-sodium acrylate)/poly(ethyleneimine) [poly(NIPAM-co-SA)/PEI] through the interpenetrating network method. The polyampholytic IPN hydrogel containing 0.5 g PEI showed a higher swelling capacity than the remaining PEI-formulated hydrogels. These gels demonstrated a relatively higher swellability at pH 5 or 6. The interaction of various surfactants and polymer solutions was evaluated at different concentrations. Both the non-ionic (Tween 80) and anionic (sodium dodecyl sulfate, SDS) surfactants promoted their swelling properties, while the cationic (dodecylpyridinium chloride, DPC) surfactant drastically reduced the swelling nature of the polyampholytic semi-IPN hydrogels. Because of more physical attractions between the polyampholytic IPN gels and DPC, it showed a greater thermal stability. The surfactant interactions were eventually studied using scanning electron microscopy. Further, the effect of different salts on the swelling properties of the polyampholytic IPN hydrogels has been demonstrated in detail.     

Preparation and characterization of pH‐sensitive hydrogels based on chitosan,itaconic acid and methacrylic acid

Novel pH‐sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were prepared in two steps. Chitosan was first ionically crosslinked with itaconic acid, after which a free radical polymerization and crosslinking of the chitosan/itaconic acid network was performed by adding methacrylic acid and a crosslinker in order to achieve better mechanical properties and tunable swelling. The samples were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, X‐ray diffraction, dynamic mechanical analysis and the swelling ratios of the hydrogels at various pH values (2.0–8.0). The hydrogel composition is found to have a great impact on the hydrogel structure, mechanical and thermal properties, morphology and swelling kinetics. The highly porous morphology of the gels is probably connected with the bulky chitosan/itaconic acid network which reduces the degree of crosslinking in the second step of the synthesis due to steric hindrances. The gels demonstrate substantial change in buffer absorbency with change of pH, low for acid buffers and the higher for pH values above 6 where the swelling is considerably slow, thus suggesting their strong candidature for use as oral drug‐delivery systems in the lower parts of the gastrointestinal tract and for drugs that require longer release times. Copyright © 2010 Society of Chemical Industry     

Enhanced adsorption properties of interpenetrating polymer network hydrogels for heavy metal ion removal

In this study, sequential interpenetrating polymer network (IPN) hydrogels based on poly(polyethylene glycol diacrylate) poly(PEGDA) and poly(methacrylic acid) (PMAA) were prepared with enhanced adsorption properties for heavy metal ion removal. The swelling behavior and mechanical property of the IPN hydrogels were characterized. It was found that swelling ratio increased, and mechanical strength decreased with the PMAA content in the IPN. The IPN hydrogels were used to remove heavy metal ions from aqueous solution under the non-competitive condition. The effects of pH values of the feed solution at the range of 3–5 and PMAA content in the IPN on the adsorption capacity were investigated. The results indicated that the adsorption capacity of the IPN hydrogels increased with the pH values and PMAA content in the IPN. Furthermore, the synergistic complexation of metal ions with two polymer networks in the IPN was found in the adsorption studies. Regeneration studies suggested that metal rebinding capacity of the IPN hydrogels did not change significantly through repeated applications compared with the first run. It was concluded that the poly(PEGDA)/PMAA hydrogels could be used as fast-responsive, high capacity, and renewable sorbent materials in heavy metal removing processes.     

p(AAm/TA)‐based IPN hydrogel films with antimicrobial and antioxidant properties for biomedical applications

Interpenetrating polymer networks (IPN), either semi‐IPN (s‐IPN) or full IPN, based on a natural polymer tannic acid (TA) and synthetic poly(acrylamide) (p(AAm)) were prepared by incorporation of TA during p(AAm) hydrogel film preparation with and without crosslinking of TA simultaneously. The synthesis of p(AAm/TA) s‐IPN and IPN hydrogels with different amounts of TA were prepared by concurrent use of redox polymerization and epoxy crosslinking. The p(AAm)‐based hydrogels were completely degraded at 37.5°C within 9 and 2 days at pHs 7.4 and 9, respectively. Biocompatibility of p(AAm), s‐IPN, and IPN were tested with WST assay and double staining, they had 75% cell viability up to almost 20 μg mL^?1 concentration against L929 fibroblast cell. Antioxidant properties of IPN and s‐IPN hydrogels were investigated with FC and ABTS^? methods. Antimicrobial properties of TA‐containing s‐IPN, and IPN hydrogels were determined against three common bacterial strains, Escherichia coli ATCC 8739, Staphylococcus aureus ATCC 6538, and Bacillus subtilis ATCC 6633, and it was found that p(AAm/TA)‐based s‐IPN and IPN hydrogels are effective antimicrobial and antioxidant materials. Moreover, almost up to day‐long linear TA release profiles were obtained from IPN and s‐IPN hydrogels in phosphate buffer solution at pH 7.4 at 37.5°C. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41876.     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

Photo‐Crosslinking Strategy Constructs Adhesive,Superabsorbent, and Tough PVA‐Based Hydrogel through Controlling the Balance of Cohesion and Adhesion

An ideal hydrogel with excellent adhesive performance has drawn much attention in research and applications. In this paper, a photo‐crosslinked polyvinyl alcohol bearing styrylpyridinium group/cellulose nanocrystals (PVA‐SbQ/CNC) composite hydrogel is designed through photo‐crosslinking technology for preventing the physical crosslinking of polyvinyl alcohol to maintain enough hydroxy groups in the hydrogel. Thus, the hydrogel exhibits excellent adhesive behavior not only for various solid substrates (plastics, rubbers, glasses, metals, and woods) but also muscle and fat. In addition, the formation mechanism, the swelling behavior, and mechanical strength are also investigated. Also, these results show that photo‐crosslinked PVA‐SbQ/CNC hydrogel possesses high swelling rate, super stretchability, and high toughness. Moreover, adhesive, mechanical, and swelling properties of PVA‐SbQ/CNC hydrogels can be changed with the increase of total incident light intensity. It is anticipated that the photo‐crosslinked PVA‐SbQ/CNC hydrogel would play a significant role in the applications of wound dressing, medical electrodes, tissue adhesives, portable equipment, and super absorbent materials. In this sense, the simple photo‐crosslinking strategy would provide new ideas for designing soft and adhesive materials through controlling the balance of cohesion and adhesion.     

Preparation of collagen‐immobilized poly(ethylene glycol)/poly(2‐hydroxyethyl methacrylate) interpenetrating network hydrogels for potential application of artificial cornea

To enhance the mechanical strength of poly(ethylene glycol)(PEG) gels and to provide functional groups for surface modification, we prepared interpenetrating (IPN) hydrogels by incorporating poly(2‐hydroxyethyl methacrylate)(PHEMA) inside PEG hydrogels. Formation of IPN hydrogels was confirmed by measuring the weight percent gain of the hydrogels after incorporation of PHEMA, as well as by ATR/FTIR analysis. Synthesis of IPN hydrogels with a high PHEMA content resulted in optically transparent and extensively crosslinked hydrogels with a lower water content and a 6 ～ 8‐fold improvement in mechanical properties than PEG hydrogels. Incorporation of less than 90 wt % PHEMA resulted in opaque hydrogels due to phase separation between water and PHEMA. To overcome the poor cell adhesion properties of the IPN hydrogels, collagen was covalently grafted to the surface of IPN hydrogels via carbamate linkages to hydroxyl groups in PHEMA. Resultant IPN hydrogels were proven to be noncytotoxic and cell adhesion study revealed that collagen immobilization resulted in a significant improvement of cell adhesion and spreading on the IPN hydrogel surfaces. The resultant IPN hydrogels were noncytotoxic, and a cell adhesion study revealed that collagen immobilization improved cell adhesion and spreading on the IPN hydrogel surfaces significantly. These results indicate that PEG/PHEMA IPN hydrogels are highly promising biomaterials that can be used in artificial corneas and a variety of other load‐bearing tissue engineering applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

PH-induced structure change of poly(vinyl alcohol) hydrogel crosslinked with poly(acrylic acid)

The structure of the hydrogel of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) was investigated by small angle X-ray scattering (SAXS) of synchrotron radiation. A physically crosslinked blend gel, which was prepared by repetitive freezing and thawing of an aqueous solution of PVA and PAA, could be chemically crosslinked by esterfication of PVA with PAA even in the hydrogel state. The chemical crosslinking induced the destruction of physical crosslinks into a folded structure, indicating that the chemical crosslinking proceeds at the sites around the physical crosslinks that contain PVA and PAA in much higher concentration than other portion of the gel. The pH-induced structure changes of the PVA hydrogels, chemically crosslinked with poly(acrylic acid) (PAA) were investigated by SAXS on the samples of various chemical crosslinking time. The gels were shrunk at pH4, and swollen at pH8. The results of SAXS showed, that the Porod slope changed with chemical crosslinking time from -3.5 to ?2.9 at pH4, and from ?2.9 to ?2.4 at pH8. The results suggest that a folded structure as a structural domain, which is characterized by fractally rough interface, tends to change into the structure that corresponds to percolation cluster, particularly at pH8. The gels immersed in pH8 showed a remarkable structure change accompanying swelling. The results revealed that a conformational change of PAA chains, induced by the pH change, can be explained by the presence of a structural domain in the gel network, where both PVA chains and PAA chains get entangled and partially form a interpenetrating polymer network(IPN).     

Synthesis,characterization, and cytotoxicity of PCL–PEG–PCL diacrylate and agarose interpenetrating network hydrogels for cartilage tissue engineering

Hydrogels are suitable biomaterials for cartilage tissue engineering due to the excellent ability to retain water to provide suitable environment for the tissue, however, the insufficient mechanical properties often prevent their wider applications. The objective of this study was to fabricate biocompatible hydrogels with good mechanical performance, high-water content, and porous microstructure for cartilage regeneration. Photocrosslinked hydrogels are one of the most widely used systems in tissue engineering due to the superior mechanical properties. In this study, block copolymer, poly(ε -caprolactone)-poly(ethylene)-poly(ε -caprolactone) diacrylate (PCL–PEG–PCL; PEC), was prepared by ring-opening polymerization, and PEC hydrogels were made through free radical crosslinking mechanism. Agarose network is chosen as another component of the hydrogels, because of the high-swelling behavior and cartilage-like microstructure, which is helpful for chondrocytes growth. Interpenetrating networks (IPN) were fabricated by diffusing PEC into agarose network followed by photo-crosslinking process. It was noted that incorporating PEC into the agarose network increased the elastic modulus and the compressive failure properties of individual component networks. In addition, high-swelling ratio and uniform porosity microstructures were found in the IPN hydrogels. IPN and PEC showed low cytotoxicity and good biocompatibility in elution test method. The results suggest promising characteristics of IPN hydrogels as a potential biomaterial for cartilage tissue engineering.     

Synthesis and swelling properties of pH‐ and temperature‐sensitive interpenetrating polymer networks composed of polyacrylamide and poly(γ‐glutamic acid)

Novel hydrogels of interpenetrating polymer networks (IPNs) composed of polyacrylamide and poly(γ‐glutamic acid) were synthesized. In these systems, both polymers were crosslinked independently; this reduced the potential loss of a polymer during the washing process, as often occurs in semi‐IPN systems. Interpolymer interactions were investigated with Fourier transform infrared spectroscopy and differential scanning calorimetry. These studies suggested possible interactions between both polymers by the formation of hydrogen bonds. The swelling behavior of these hydrogels was analyzed by immersion of the hydrogel samples in deionized water at 25 and 37°C and in buffer solutions with pHs of 3, 7, and 10. The kinetics of swelling showed increases in the values of the swelling ratio with increasing immersion time in the swelling medium, molar proportion of the biopolymer in the hydrogel, temperature, and pH of the swelling medium. All of the hydrogels swelled rapidly and reached equilibrium in an average time of 40 min. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(vinyl acetate)/polyacrylate semi‐interpenetrating polymer networks. II. Thermal,mechanical, and morphological characterization

The thermal, dynamic mechanical, and mechanical properties and morphology of two series of semi‐interpenetrating polymer networks (s‐IPNs) based on linear poly(vinyl acetate) (PVAc) and a crosslinked n‐butyl acrylate/1,6‐hexanediol diacrylate copolymer were investigated. The s‐IPN composition was varied with different monoacrylate/diacrylate monomer ratios and PVAc concentrations. The crosslinking density deeply affected the thermal behavior. The results showed that a more densely crosslinked acrylate network promoted phase mixing and a more homogeneous structure. The variation in the linear polymer concentration influenced both the morphology and mechanical properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Pluronics as crosslinking agents for collagen: novel amphiphilic hydrogels

A series of Pluronic samples (L61, L121, F68, F108) were investigated as collagen crosslinking agents to determine their ability to improve the Young's modulus of a collagen hydrogel, while simultaneously serving as surfactants for single‐walled carbon nanotubes (SWNTs). The crosslinked collagen matrices were prepared by blending type I bovine collagen with either Pluronics or SWNTs dispersed in an aqueous Pluronic solution and crosslinked utilizing carbodiimide chemistry. The resulting material was a crosslinked collagen hydrogel with sufficient mechanical strength to be manipulated and transferred without damaging the matrix. Differential scanning calorimetry confirmed a change in the denaturation temperature for hydrogels prepared using Pluronic or Pluronic/SWNT solutions. Water uptake analysis confirmed the crosslinked matrices to be hydrogels. These collagen hydrogels produced with Pluronics as the crosslinking agents exhibited a Young's modulus 3 to 9 times greater than collagen hydrogels produced in the absence of any crosslinking agent, regardless of polymer molecular weight. However, non‐covalent incorporation of SWNTs was not found to affect the Young's modulus of the resulting collagen hydrogels at the incorporation levels achieved with the Pluronics surfactants. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of new injectable and degradable dextran-based hydrogels

Injectable and degradable hydrogels are very interesting networks for drug delivery and cell transplantation applications since they can be administered in the human body in a minimally invasive way. In most cases, the crosslinking reaction occurs by photopolymerisation or free radical polymerisation; however, the use of chemical initiators may promote cell death. In the current work, injectable and degradable dextran-based hydrogels were prepared without the use of initiators. Dextran, a natural glucose-containing polysaccharide, was oxidized with sodium periodate (dexOx) and the derivatives characterized by NMR and FTIR spectroscopy's as well as by colorimetric techniques. The oxidized derivatives were crosslinked with adipic acid dihydrazide (AAD), forming a gel within 2-4 min. The obtained hydrogels were characterized by their mechanical properties, swelling and degradation behavior under physiologic conditions. In addition, the hydrogel interior morphology as well as porous structure was evaluated by scanning electron microscopy (SEM) and mercury intrusion porosimetry (MIP). MIP analysis showed that dexOx hydrogels crosslinked with 10% of AAD were macroporous with pore sizes ranging from 0.32 to 0.08 μm. As expected, the average pore size increased during hydrogel degradation as confirmed by SEM and MIP studies.     

The swelling behaviors and network parameters of cationic starch‐g‐acrylic acid/poly(dimethyldiallylammonium chloride) semi‐interpenetrating polymer networks hydrogels

Amphiphilic semi‐interpenetrating polymer networks (semi‐IPN) hydrogels were prepared by a sequential‐IPN method by acrylic acid graft copolymerization into cationic starch in mild aqueous media of poly(dimethyldiallylammonium chloride). Some main factors were investigated to evaluate the swelling of hydrogels, and the network parameters M_c were given accordingly to elaborate the interaction between polymers. The chemical structure of the resulting hydrogel was confirmed using Fourier transform infrared spectroscopy. The cationic starch‐based semi‐IPN hydrogels achieved a high swelling capacity of 1070 g/g in deionized water and 94 g/g in 0.9 wt % NaCl solution, respectively) and high compressive stress in a high water content. Besides, a different pH‐dependent behavior was found for this semi‐IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Highly stretchable,tough, and self‐recoverable and self‐healable dual physically crosslinked hydrogels with synergistic “soft and hard” networks

Strength, toughness and self‐recoverability are among the most important properties of hydrogels for tissue‐engineering applications. Yet, it remains a challenge to achieve these desired properties from the synthesis of a single‐polymer hydrogel. Here, we report our one‐pot, a monomer‐polymerization approach to addressing the challenge by creating dual physically crosslinked hybrid networks, in particular, synergistic “soft and hard” polyacrylic acid‐Fe³⁺ hydrogels (SHPAAc‐Fe³⁺). Favorable mechanical properties achieved from such SHPAAc‐Fe³⁺ hydrogels included high tensile strength (about 1.08 MPa), large elongation at break (about 38 times), excellent work of extension (about 19 MJ m^?3), and full self‐recoverability (100% recovery of initial properties within 15 min at 50°C and within 60 min in ambient conditions, respectively). In addition, the hydrogels exhibited good self‐healing capabilities at ambient conditions (about 40% tensile strength recovery without any external stimuli). This work demonstrates that dual physical crosslinking combining hydrophobic interaction and ionic association can be achieved in single‐polymer hydrogels with significantly improved mechanical performance but without sacrificing favorable properties. POLYM. ENG. SCI., 59:145–154, 2019. © 2018 Society of Plastics Engineers     

Investigation of mechanical and thermodynamic properties of pH‐sensitive poly(N,N‐dimethylaminoethyl methacrylate) hydrogels prepared with different crosslinking agents

pH‐sensitive poly(N,N‐dimethylaminoethyl methacrylate) hydrogels were synthesized by free‐radical crosslinking polymerization using two different crosslinking agents; tetraethylene glycol dimethacrylate (TEGMA) and N,N′‐methylenebis(acrylamide) (BAAm). The influence of the polymerization factors such as the type of the crosslinking agent and the gel preparation concentration on the swelling behavior, the gel strength, the effective crosslinking density and the average chain length between the crosslink points for the resulting hydrogels was investigated. The results of the equilibrium swelling measurements in water showed that the linear swelling ratio of the resulting hydrogels increases with increasing gel preparation concentration. The swelling ratio of PDMAEMA hydrogels crosslinked with BAAm is larger than those for hydrogels crosslinked with TEGMA over the entire range of the polymer network concentration. The hydrogels exhibit very sharp pH‐sensitive phase transition in a very narrow range of pH between 7.7 and 8.0. From the mechanical measurements, it was also found that the linear swelling ratio of resulting hydrogels depends on the crosslinking density and also the type of the crosslinker used in the preparation. The resulting hydrogels are thought to be good candidates for pH‐sensitive drug delivery systems. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers