Capacitance properties of graphite oxide/poly(3,4‐ethylene dioxythiophene) composites

Poly(3,4‐ethylene dioxythiophene) (PEDOT) and graphite oxide (GO)/PEDOT composites (GPTs) doped with poly(sodium styrene sulfate) (PSS) were synthesized by in situ polymerization in aqueous media. The electrochemical capacitance performances of GO, PEDOT–PSS, and GPTs as electrode materials were investigated. The GPTs had a higher specific capacitance of 108 F/g than either composite constituent (11 F/g for GO and 87 F/g for PEDOT–PSS); this was attributable to its high electrical conductivity and the layer‐within/on‐layer composite structure. Such an increase demonstrated that the synergistic combination of GO and PEDOT–PSS had advantages over the sum of the individual components. On the basis of cycle‐life tests, the capacitance retention of about 78% for the GPTs compared with that of 66% for PEDOT–PSS after 1200 cycles suggested a high cycle stability of the GPTs and its potential as an electrode material for supercapacitor applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of a poly(3‐hexylthiophene)‐grafted indium tin oxide/poly(3‐hexylthiopene) composite and its conductivity–temperature characteristics

The temperature–conductivity characteristics of poly(3‐hexylthiophene) (P3HT) composites filled with P3HT‐grafted indium tin oxide (ITO) particles were investigated in this work. The ITO particles were first treated with a silane coupling reagent of 3‐aminopropyltriethoxysilane (APS), and then thiophene rings were introduced through a condensation reaction between the ending amino groups of APS and the carboxylic groups of thiophene‐3‐acetic acid. The composites were prepared by the polymerization filling of the 3‐hexylthiophene (3HT) monomer with the thiophene‐ring‐introduced ITO particles. Elemental analysis, Fourier transform infrared, and X‐ray photoelectron spectroscopy were used to confirm the grafting reaction on the ITO surface. The longer the polymerization time was or the higher the 3HT/ITO feeding ratio was, the more P3HT was grafted. The influence of the grafted amount on the electrical properties of ITO particles was attributed to the wrapping effect formed by the grafted P3HT on the surface of the ITO particles. The conductivity change of the P3HT‐grafted ITO/P3HT composites was proved to be subject to the change in the average gap width of ITO interparticles, which was determined by the filling ratio of P3HT to ITO in the polymerization and the volume expansion effect of a P3HT thin film between neighboring ITO particles during the heating process. In comparison with the ungrafted ITO/P3HT composites, the grafting treatment enhanced the interaction between the particles and polymer matrix, and this was helpful for obtaining a more homogeneous dispersion structure for the composites and thus afforded a higher positive temperature coefficient intensity and better reproducibility. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1881–1888, 2006     

Conductive fibers based on poly(ethylene terephthalate)–polyaniline composites manufactured by electrochemical polymerization

A novel method of manufacturing composite conductive fibers was developed through electrochemical polymerization with an apparatus consisting of insulating fibers, cotton fabrics as electrolytic solution holders, an electrolytic solution, and planer electrodes. By this method, poly(ethylene terephthalate) (PET) fibers coated with polyaniline (PAN) were prepared readily and yielded PET–PAN composite conductive fibers (PPCFs). The content of PAN in PPCFs increased with an increase in both the aniline concentration in the electrolytic solution and the polymerization voltage, although it did not depend on the load applied to the electrodes. Observations of the PPCF surface by scanning electron microscopy confirmed that the formation processes of PPCFs could be divided into three steps: (1) fine (nanometer‐size) granular PAN was generated from the anode and adsorbed onto the PET fiber surface, (2) the size of the granular PAN increased up to about 90 nm in a short time, and (3) the granular PAN was linked together to form networks. The conductivity of PPCFs increased with an increasing content of PAN networks. The surface resistance of the PPCF fabric was about 3 × 10⁵ Ω/□ at a PAN content of approximately 2 wt %. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1073–1078, 2003     

Chemical preparation of conducting polyfuran/poly(2‐chloroaniline) composites and their properties: A comparison of their components,polyfuran and poly(2‐chloroaniline)

Conductive homopolymers and composites of poly(2‐chloroaniline) (P2ClAn) and polyfuran (PFu) were synthesized chemically in hydrous and anhydrous media, and their properties were investigated. The polymers and composites were characterized by Fourier infrared spectroscopy, ultraviolet‐visible absorption spectroscopy, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, magnetic susceptibility, and conductivity measurements. It was found that the PFu/P2ClAn composite is thermally more stable than both the P2ClAn/PFu composite and the homopolymers. It was determined from Gouy scale measurements that conducting mechanisms of homopolymers and composites are polaron and bipolaron in nature. It was observed that the conductivity and magnetic susceptibility values changed with a changing amount of the guest polymer in the prepared composites. The conductivity (3.21 × 10^?2 S/cm) of the P2ClAn/PFu (55.8% m/m) composite was found to be higher than the conductivities of both homopolymers (σ_PFu = 1.44 × 10^?5 S/cm; σ_P2ClAn = 1.32 × 10^?3 S/cm). It was determined that the composites synthesized had different conductivities and morphological and thermal properties from changing synthesis order. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2924–2931, 2003     

Photo‐induced grafting of poly(ethylene glycol) onto polyamide thin film composite membranes

In this study, the surface grafting of poly(ethylene glycol) (PEG) onto commercial polyamide thin film composite (TFC‐PA) membranes was carried out, using ultraviolet photo‐induced graft polymerization method. The attenuated total reflection Fourier transform infrared spectra verify a successful grafting of PEG onto the TFC‐PA membrane surface. The scanning electron microscope and atomic force microscope analyses demonstrate the changes of the membrane surface morphology due to the formation of the PEG‐grafted layer on the top. The contact angle measurements illustrate the increased hydrophilicity of the TFC‐PA‐g‐PEG membrane surfaces, with a significantly reduced water contact angles compared to the unmodified one. Consequently, the separation performance of the PEG‐grafted membranes is highly improved, with a significant enhancement of flux at a great retention for removal of the different objects in aqueous feed solutions. In addition, the antifouling property of the modified membranes is also clearly improved, with the higher maintained flux ratios and the lower irreversible fouling factors compared to the unmodified membrane. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45454.     

Synthesis and characterization of poly(dimethylsiloxane)–polythiophene composites

The synthesis was performed by the electropolymerization of thiophene on a poly(dimethylsiloxane) (PDMS)‐coated platinum electrode at 2.2 V with tetrabutylammoniumtetrafloroborate (TBAFB) as a supporting electrolyte and with acetonitrile as a solvent. The characterization of the PDMS–polythiophene (Pth) composites was carried out with cyclic voltammetry, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and conductivity measurements. The observed conductivities of the PDMS composites were 2.2–5.2 S/cm. The conductivity of Pth did not change appreciably with the addition of up to 30% insulating PDMS, but its processability improved. FTIR, SEM, and DSC studies showed the existence of a strong interaction, rather than physical adhesion, between PDMS and Pth. Highly flexible and foldable PDMS–Pth composites were obtained. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2113–2119, 2003     

Preparation,characterization, thermooxidative degradation,and stability of polyaniline/polyacrylonitrile composites in terms of direct‐current electrical conductivity retention

Electrically conducting composites based on polyaniline and polyacrylonitrile were prepared by two slightly different techniques and were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The thermooxidative degradation of the composites was studied by simultaneous thermogravimetric analysis and differential thermal analysis techniques. The stability of the composites in terms of direct‐current electrical conductivity retention was studied in an oxidative environment by isothermal and cyclic techniques. The composites were thermally stable under ambient environmental conditions; however, their properties were dependent on the method of preparation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 437–448, 2006     

Chemical synthesis,characterization, and direct‐current conductivity studies of polypyrrole/γ‐Fe2O3 composites

The in situ polymerization of pyrrole was carried out in the presence of γ‐Fe₂O₃ to synthesize polypyrrole/γ‐Fe₂O₃ composites by a chemical oxidation method. The polypyrrole/γ‐Fe₂O₃ composites were synthesized with various compositions, including 10, 20, 30, 40, and 50 wt % γ‐Fe₂O₃ in pyrrole. The polypyrrole/γ‐Fe₂O₃ composites were characterized with X‐ray diffractometry and infrared spectroscopy. The surface morphology of these composites was studied with scanning electron microscopy. The direct‐current conductivity was studied from 40 to 200°C. The dimensions of the γ‐Fe₂O₃ particles in the matrix had a greater influence on the conductivity values. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2797–2801, 2007     

Synthesis and properties of conducting polypyrrole,polyalkylanilines, and composites of polypyrrole and poly(2‐ethylaniline)

Conducting polymers of alkylanilines, pyrrole, and their conducting composites were synthesized by oxidation polymerization. The oxidants used were KIO₃ and FeCl₃ for the polyalkylanilines and polypyrrole (PPy), respectively. Among the polyalkylanilines synthesized with KIO₃ salt, the highest conductivity was obtained with poly(2‐ethylaniline) (P2EAn) with a value of 4.10 × 10^?5 S/cm. The highest yield was obtained with poly(N‐methylaniline) with a value of 87%. We prepared the conducting composites (PPy/P2EAn and P2EAn/PPy) by changing synthesis order of P2EAn and PPy. The electrically conducting polymers were characterized by IR spectroscopy, ultraviolet–visible spectroscopy, thermogravimetric analysis, and X‐ray diffraction spectroscopy. From the results, we determined that the properties of the composites were dependent on the synthesis order of the polymers. The thermal degradation temperature of PPy was observed to be higher than that of the other polymers and composites. We determined from X‐ray results that the structures of the homopolymers and composites had amorphous regions (88–95%) and crystal regions (5–12%). From the Gouy balance magnetic measurements, we found that the polymers and composites were bipolaron conducting mechanisms. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 241–249, 2006     

5,6‐bis(tetradecyloxy)‐2,1,3‐benzoselenadiazole‐based polymers for photovoltaic applications

A series of new 5,6‐bis(tetradecyloxy)‐2,1,3‐benzoselenadiazole‐based copolymers ( PBDT‐DTBSe, PC‐DTBSe , and PF‐DTBSe) have been first synthesized by Stille or Suzuki coupling polymerization reaction. The synthesized copolymers show good solubility in common organic solvents, such as chloroform, tetrahydrofuran, and chlorobenzene with excellent film‐forming properties. The molecular weight was determined by gel permeation chromatography and the thermal properties were investigated by thermogravimetric analysis. All the copolymers exhibited broad absorption from 350 to 700 nm. The preliminary results showed the device based on the structure of indium tin oxide/PEDOT : PSS/ PC‐DTBSe : PC₆₁BM (1 : 2, w/w)/Ca/Al displayed the best photovoltaic performance with a power conversion efficiency of 1.35%, a V_oc of 0.87 V, a J_sc of 3.84 mA/cm² and a fill factor of 40.4%, under illumination of AM 1.5 G (100 mW/cm²). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of a conducting polyaniline/TiO2−SiO2 composites

Polyaniline/TiO₂?SiO₂ composites were prepared by an in situ chemical oxidation polymerization approach in the presence of hybrid TiO₂?SiO₂ fillers. The obtained polyaniline/TiO₂?SiO₂ composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectrometer (FTIR), X‐ray diffraction (XRD), thermogravimetry (TG), and current?voltage (I?V) measurements. SEM picture shows a variation in morphology of polyaniline (PANI) from fiber shape to relatively regular particle shape with increasing TiO₂?SiO₂ contents in the composites. The floccule‐like structures were observed by high resolution TEM, which may help improve the efficiency of conductive network. SEM, XRD, TG, and FTIR spectra all reveal that a relatively strong interaction exist between TiO₂?SiO₂ and PANI. The I?V characteristics in such composites indicate that the charge transport is mainly governed by the space charge effects, which occurs at the interface between the conducting PANI and TiO₂?SiO₂. Meanwhile, PANI/TiO₂?SiO₂ composites exhibit significant increase in conductivity than PANI/TiO₂ or PANI/SiO₂. The reasons about high conductivity of PANI/TiO₂?SiO₂ have also been discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2288–2295, 2013     

pH and thermo‐responsive poly(N‐isopropylacrylamide) copolymer grafted to poly(ethylene glycol)

pH and thermo‐responsive graft copolymers are reported where thermo‐responsive poly(N‐isopropylacrylamide) [poly(NIPAAm), poly A ], poly(N‐isopropylacrylamide‐co‐2‐(diethylamino) ethyl methacrylate) [poly(NIPAAm‐co‐DEA), poly B ], and poly(N‐isopropylacrylamide‐co‐methacrylic acid) [poly(NIPAAm‐co‐MAA), poly C ] have been installed to benzaldehyde grafted polyethylene glycol (PEG) back bone following introducing a pH responsive benzoic‐imine bond. All the prepared graft copolymers for PEG‐g‐poly(NIPAAm) [ P‐N1 ], PEG‐g‐poly(NIPAAm‐co‐DEA) [ P‐N2 ], and PEG‐g‐poly(NIPAAm‐co‐MAA) [ P‐N3 ] were characterized by ¹H‐NMR to assure the successful synthesis of the expected polymers. Molecular weight of all synthesized polymers was evaluated following gel permeation chromatography. The lower critical solution temperature of graft copolymers varied significantly when grafted to benzaldehyde containing PEG and after further functionalization of copolymer based poly(NIPAAm). The contact angle experiment showed the changes in hydrophilic/hydrophobic behavior when the polymers were exposed to different pH and temperature. Particle size measurement investigation by dynamic light scattering was performed to rectify thermo and pH responsiveness of all prepared polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Composites of poly(2‐chloroaniline) and poly(o‐toluidine) with pumice and their application in the removal of chromium(VI) ions from aqueous solutions

Poly(2‐chloroaniline) (P2ClAn)/pumice (Pmc) and poly(o‐toluidine) (POT)/Pmc composites were synthesized via the chemical oxidative polymerization of 2‐chloroaniline and o‐toluidine in the presence of a dispersion of Pmc powders in water solvent with an (NH₄)₂S₂O₈ oxidant. The composites were characterized with Fourier transform infrared (FTIR) spectroscopy, thermo‐gravimetric/differential thermal analysis (TG‐DTA), and scanning electron microscopy devices. The presence of P2ClAn and POT in the structure of the composites was confirmed by FTIR. Theresults of analysis show strong interactions between the homopolymers and Pmc. The applicability of the P2ClAn/Pmc and POT/Pmc composites were investigated for the removal of Cr(VI) ions in water. Batch adsorption experiments were carried out as a function of pH, initial concentration, time, adsorbent dosage, and temperature. The batch sorption kinetics were tested, and the applicability of the Langmuir and Freundlich adsorption isotherms for this system was tested at 20 ± 1°C. An initial pH of 3.0 was most favorable for Cr(VI) removal by all adsorbents. The adsorption capacities obtained were 0.187 and 4.959 mmol/g of adsorbent for POT/Pmc and P2ClAn/Pmc from the Freundlich and Langmuir adsorption isotherms, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Fabrication of poly(3,4‐ethylenedioxythiophene)‐polysaccharide composites

Poly(3,4‐ethylenedioxythiophene) (PEDOT) doped with a series of anionic polysaccharides such as carboxymethyl cellulose, sodium hyaluronate, xanthan gum, pectin, gellan gum were prepared by electropolymerization in aqueous solutions. Some other dopants of potassium nitrate, potassium sulfate, sodium poly(styrenesulfonate), and sodium polyacrylate were used in comparison with the anionic polysaccharides. The electrochemical properties and stability of the obtained PEDOT films were also investigated. It was found that indium tin oxide (ITO) conductive glass could be used as the working electrode of the electropolymerization of EDOT and that the dopant had a great influence on polymerization potential and overoxidation potential. These charged biomolecules of anionic polysaccharides were found to facilitate electropolymerization of EDOT instead of common doping anions as counterion. The electroactive PEDOT films doped with anionic polysaccharides showed stable electrochemical properties, good texture, and adhesion properties to the ITO conductive glass. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polymer electrolytes based on poly(ethylene glycol) and cyanoresin

Polymer electrolytes based on a mixed polymer matrix consisting of poly(ethylene glycol) (PEG) and cyanoresins with lithium salt and plasticizer were prepared with an in situ blending process to improve both the mechanical properties and the ionic conductivity (σ). The PEG/lithium perchlorate (LiClO₄) complexes, including blends of cyanoethyl pullulan (CRS) and cyanoethyl poly(vinyl alcohol) (CRV), exhibited higher σ's than a simple PEG/LiClO₄ complex when the blend compositions of CRS/CRV were 5 : 5 or 3 : 7 or than CRV alone. When the CRS/CRV blend was compared with a copolymer of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) (CRM) in the same molar ratio, the σ values of the polymer electrolytes containing the CRM copolymer series were slightly higher than those of the CRS/CRV blends containing PEG/LiClO₄ complexes. Moreover, the addition of cyanoresin to PEG/LiClO₄/(ethylene carbonate–propylene carbonate) polymer electrolytes provided better thermal stability and dynamic mechanical properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2402–2408, 2007     

Molecular composites created by the solution blending of polyaniline and sulfonated poly(ether sulfone)

New conducting thermally stable blends of polyaniline (PANi) with sulfonated poly(ether sulfone) as a matrix were prepared by a solution‐blending method. Camphorsulfonic acid (CSA) was used as a protonic agent for PANi. A sulfonyl group was introduced into the poly(ether sulfone) to enhance the coulomb interaction among the blends. The influence of the sulfonated group in poly(ether sulfone) was monitored with electrical property measurements. Ultraviolet–visible spectra of the blend compositions showed a well‐developed polaron band. The compatibility of the blends, that is, hydrogen bonding and dispersion at the molecular level, was ascertained with X‐ray diffraction and Fourier transform infrared (FTIR) spectroscopy; these supported intermolecular interaction. A smooth and uniform morphology was observed in the blends. The electrical conductivity of the blends increased up to 14 S/cm with the protonation of the PANi complex with CSA, and the percolation threshold was found to be 2 wt % PANi. These new blends showed increases in conductivity and compatibility over other PANi–poly(ether sulfone) blends. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Frequency‐dependent conductivity and dielectric permittivity of polyaniline/CeO2 composites

The PANI/CeO₂ composites were synthesized using in situ deposition technique by placing fine graded CeO₂ in polymerization mixture of aniline. This is the single step polymerization process for the direct synthesis of emeraldine salt phase of polymer. Low frequency dielectric studies were carried out on pressed pellets of PANI/CeO₂ with various concentrations of cerium oxide (10, 20, 30, 40, and 50 wt % of CeO₂ in PANI). The results are interpreted in terms of polarons and bipolarons, which are responsible for the dielectric relaxation mechanism and frequency dependence of conductivity. It is found that a.c. measurements at room temperature may well serve as a parallel way to the time consuming d.c. conductivity versus temperature technique, to detect the thermal degradation of the transport properties in conducting polymers. It is observed that the charge motion via creation/annihilation of polarons and bipolarons increases as the weight percentage of the composite is increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1403–1405, 2006     

The role of conductive pathways in the conductivity and rheological behavior of poly(methyl methacrylate)–graphite composites

Up to now, research on the dynamic process of conductive network formation has tended to focus on composite particles with one‐dimensional geometry, such as carbon black and carbon nanotubes. However, studies on this subject based on fillers with two‐dimensional structure, such as graphite, are rare in the literature. In this work, the dynamic percolation and rheological properties of poly(methyl methacrylate) (PMMA)–graphite composites under an electric field were investigated. The activation energies of conductive network formation and polymer matrix mobility were calculated from the temperature dependence of the percolation time and the zero‐shear viscosity. It was found that the activation energy calculated from the zero‐shear viscosity was not influenced by the electric field in the concentration range investigated, but the electric field had an effect on the activation energy calculated from the percolation time. This finding emphasizes that the electrical and rheological properties have different physical origins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43810.     

Electrical properties of sorbitol‐doped poly(vinyl alcohol)–poly(acrylamide‐co‐acrylic acid) polymer membranes

Solid polymer membranes from poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐acrylic acid) (PAA) with varying doping ratios of sorbitol were prepared using the solution casting method. The films were examined with Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and AC impedance spectroscopy. The impedance measurements showed that the ionic conductivity of PVA–PAA polymer membrane can be controlled by controlled doping of sorbitol within the polymer blends. The PVA–PAA–sorbitol membranes were found to exhibit excellent thermal properties and were stable for a wide temperature range (398–563K), which creates a possibility of using them as suitable polymers for device applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Investigation of the behavior of hydrogen‐bonded phenolic compounds and their determination by using poly(vinylferrocenium)–polyaniline composite film

The hydrogen bonding between phenolic compounds (phenol (Ph), catechol (Ct), resorcinol (Rs), and hydroquinone (Hq)) is investigated at pH 4. The oxidation behaviors of total phenolic compounds (TotPh) are different from their individual behaviors due to the existence of intermolecular hydrogen‐bonded oligomeric clusters. Theoretical calculations and voltammetric and spectroscopic evidences support the intermolecular hydrogen bonding. The interaction of the phenolic compounds with polyaniline (PANI) and poly(vinylferrocenium) (PVF⁺) films are also investigated electrochemically and spectroscopically. The phenolic molecules are immobilized in both polymers due to the construction of hydrogen bonds by PANI and the complexation with PVF⁺. In addition, Ct and Hq are catalytically oxidized by PANI. Determinations of Ct and TotPh are performed on PVF⁺–PANI composite ‐ coated Pt electrode using amperometric I–t method. Composite coating exhibits significant electrochemical activity toward Ct and TotPh, with high sensitivity and a wide linearity range. The steady‐state currents versus concentration of Ct and TotPh are found to be linear in the range of 1.35 × 10^?3?50.0 mM and 4.10 × 10^?4?560 mM for two linear regions, respectively. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43596.