Synthesis,characterization, and swelling behavior of superabsorbent hydrogel from sodium salt of partially carboxymethylated tamarind kernel powder‐g‐PAN

Polyacrylonitrile (PAN)‐grafted sodium salt of partially carboxymethylated tamarind kernel powder (Na‐PCMTKP‐g‐PAN, %G = 413.76 and %GE = 96.48) was prepared using the established optimal reaction conditions for ceric‐initiated graft copolymerization of acrylonitrile onto Na‐PCMTKP (DS = 0.15) in a homogeneous medium. The graft copolymer was hydrolyzed by 0.7N KOH solution at 90–95°C to yield the superabsorbent hydrogel H‐Na‐PCMTKP‐g‐PAN. The nitrile groups of Na‐PCMTKP‐g‐PAN were completely converted into a mixture of hydrophilic carboxamide and carboxylate groups during alkaline hydrolysis, followed by in situ crosslinking of the grafted PAN chains. The products were characterized spectroscopically and morphologically. The swelling behavior of the unreported superabsorbent hydrogel, H‐Na‐PCMTKP‐g‐PAN, was studied by carrying out its absorbency measurements in low‐conductivity water, 0.15M salt (NaCl, CaCl₂, and AlCl₃) solutions, and simulated urine (SU) at different timings. The swelling behavior of the hydrogel in different swelling media followed the second‐order kinetics. The values of the various swelling characteristics were reported. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and swelling characterization of poly (n‐isopropylacrylamide)‐based porous hydrogels

Nine different poly(n‐isopropylacrylamide)‐based hydrogels, including nonionic, cationic, and anionic hydrogels, were synthesized in with and without the addition of pore‐forming agents. The synthesized hydrogels were characterized with dry gel density measurements, scanning electron microscopy observations, and the determination of the swelling ratio swelling kinetics. All the results showed that the cationic hydrogels had faster swelling kinetics than the anionic and nonionic hydrogels. The addition of pore‐forming agents (NaHCO₃ and carboxymethylcellulose) during the synthesis process led to porous hydrogels with lower dry densities, swelling ratios, and swelling kinetic parameter values. An empirical equation was developed to successfully correlate the swelling kinetic parameter with the hydrogel swelling ratio. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3651–3658, 2004     

Preparation of porous polyacrylamide hydrogels by frontal polymerization

Polyacrylamide hydrogels with defined porous structure were synthesized through frontal polymerization (FP) in the presence of NaHCO₃ as a foaming agent. Pore properties were analyzed using scanning electron microscopy and mercury intrusion porosimetry. The as‐prepared hydrogels displayed a small cell diameter of ca 2 µm. The dissolved foaming agent dispersing at the level of molecules and the polymerization front propagating step by step should be responsible for the small uniform cell structure. The pore volume varied from 0.63 to 3.65 cm³ g^?1 and the bulk density changed from 0.48 to 0.28 g cm^?3 for a foaming agent content from 0 to 18%. The hydrogels synthesized by FP exhibited higher swelling rate and swelling ratio with respect to conventional batch polymerization. The highest swelling ratio and rate were obtained at a foaming agent concentration of 12% based on monomer. Copyright © 2007 Society of Chemical Industry     

Preparation and physical properties of hyaluronic acid‐based cryogels

Macroporous hydrogels based on hyaluronan (HA), a natural polysaccharide occurring in extracellular matrix, have attracted interest over many years owing to their numerous applications in the biomedical area. However, HA hydrogels produced so far suffer from low mechanical strength and slow rate of response against external stimuli, which limit their applications. Here, we prepared macroporous HA cryogels of high mechanical stability and fast responsivity from aqueous HA solutions at subzero temperatures using ethylene glycol diglycidyl ether as a crosslinking agent. HA cryogels are squeezable and no crack development was exhibited when compressed up to 80% strain. Depending on the synthesis parameters, the cryogels exhibit an elastic modulus between 0.2 and 2 kPa, and show fast swelling/deswelling behavior. The microstructure of the cryogels consists of large, interconnected pores on the order of 100 µm separated by thick pore walls, as observed by scanning electron microscopy and confocal scanning laser microscopy. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. 2015 , 132, 42194.     

Preparation and swelling behavior of biodegradable hydrogels based on α,β‐poly(N‐2‐hydroxyethyl‐DL‐aspartamide)

Biodegradable polymers and the hydrogels have been increasingly applied in a variety of biomedical fields and pharmaceutics. α,β‐Poly(N‐2‐hydroxyethyl‐DL ‐aspartamide), PHEA, one of poly(amino acid)s with hydroxyethyl pendants, are known to be biodegradable and biocompatible, and has been studied as an useful biomaterial, especially for drug delivery, via appropriate structural modification. In this work, hydrogels based on PHEA were prepared by two‐step reaction, that is, the crosslinking of polysuccinimide, the precursor polymer, with oligomeric PEG or PEI‐diamines and the following nucleophilic ring‐opening reaction by ethanolamine. Soft hydrogels possessing varying degrees of gel strength could be prepared easily, depending on the amount of different crosslinking reagents. The swelling degrees, which were in the range of 10–40 g–water/dry gel, increased somewhat at higher temperature, and also at alkaline pH of aqueous solution. A typical hydrogel remained almost unchanged for 1 week, at 37°C in phosphate buffer of pH 7.4, and then seemed to degrade slowly as time. A porous scaffold could be fabricated by the freeze drying of water‐swollen gel. The PHEA‐based hydrogels have potential for useful biomaterial applications including current drug delivery system. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3741–3746, 2003     

Mechanical response and equilibrium swelling of thermoresponsive copolymer hydrogels

Covalently crosslinked thermoresponsive (TR) gels form a special class of hydrogels that swell noticeably below their volume phase transition temperature T_c and shrink above T_c. As the critical temperature is weakly affected by the preparation conditions and molar fractions of monomers and crosslinkers in the pre‐gel solution, a facile method to modulate T_c (which is required for biomedical applications of TR gels and their use as temperature‐triggered actuators) is to incorporate relatively small amounts of neutral monomers whose hydrophilicity differs from that of the basic monomers. Although observations on copolymer gels confirm the effectiveness of this method, the molar fractions of comonomers necessary for the tuning of T_c remain unknown. A model was developed for the mechanical response and equilibrium swelling of TR gels. Adjustable parameters in the governing relations were found by fitting equilibrium swelling diagrams for poly(N‐isopropylacrylamide) homopolymer and copolymer gels. Good agreement is demonstrated between the experimental data and the results of simulation. Based on the model, an analytical formula is derived that expresses the volume phase transition temperature in terms of the molar fraction of comonomers. Its ability to predict the critical temperature is confirmed by comparison with observations on several copolymer gels. © 2020 Society of Chemical Industry     

Hydrolyzed collagen‐grafted‐poly[(acrylic acid)‐co‐(methacrylic acid)] hydrogel for drug delivery

Hydrolyzed collagen‐grafted‐poly[(acrylic acid)‐co‐(methacrylic acid)] hydrogels were synthesized by solution polymerization and confirmed by infrared spectroscopy. From sequential univariate analysis, the optimal molar ratio of acrylic acid: methacrylic acid was 92:8 in the presence of N,N′‐methylenebisacrylamide, ammonium persulfate, and N,N,N′,N′‐tetramethylethylenediamine at 0.12, 0.015, and 0.2% mol of the monomers, respectively. The water absorbency of this hydrogel was both pH‐ and temperature‐dependent, but was higher in nonbuffered water than in boric acid/citric acid/phosphate buffer under the same conditions. The optimal hydrogel could swiftly swell and deswell in neutral and acid solutions, respectively. Its potential application in drug delivery was examined using insulin and methylene blue as model payload drugs. Loading in a 50% (v v^?1) ethanol solution gave a higher insulin loading level than in the buffer water. Insulin and methylene blue were both released at pH 6.8 but not at pH 1.2, but followed first order kinetics and the Higuchi equation, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45654.     

Thermal and swelling studies of hydrophobically modified polyacrylamide hydrogels

Hydrophobically modified polyacrylamide hydrogels were prepared by polymerizing acrylamide, using n‐butyl acrylate and 2‐ethyl hexyl acrylate as comonomers and dimethyl formamide as a solvent. We report here for the first time that the Alfred Q‐e reactivity ratios are matching with the experimental value (elemental analysis result) for the terpolymer hydrogel systems. Differential scanning calorimetry (DSC) thermograms of the hydrogel samples revealed two endothermic transitions, one near 0°C, corresponding to the melting transition of ice and another above ambient temperature. This high temperature transition is due to the rearrangement of water molecules engaged in hydrophobic hydration surrounding the hydrophobic groups (alkyl side chains). This depends on the type of hydrophobic groups and the gel compositions. Swelling and deswelling studies of the gels were performed using various solvents such as water and isopropyl alcohol. An abnormally high swelling and deswelling behavior was observed in the homopolymer gels and the gels with low amount of hydrophobic comonomers. This could be attributed to the more intramolecular cross‐linked structure formed during synthesis in organic solvent. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Dual pH‐ and temperature‐responsive hydrogels with extraordinary swelling/deswelling behavior and enhanced mechanical performances

pH‐ and temperature‐responsive semi‐interpenetrating nanocomposite hydrogels (NC hydrogels) were prepared with surface‐functionalized graphene oxide (GO) as the crosslinker, N‐isopropylacrylamide (NIPAM) as the monomer, and chitosan (CS) as an additive. The effects of 3‐(trimethoxysilyl)propylmethacrylate‐modified GO sheets and CS content on various physical properties were investigated. Results show that PNIPAM/CS/GO hydrogels undergo a large volumetric change in response to temperature. Swelling ratios of PNIPAM/CS/GO hydrogels are much larger than those of the conventional organically crosslinked PNIPAM hydrogels. The deswelling test indicates that the deswelling rate was greatly enhanced by incorporating CS into the hydrogel network and using the surface‐functionalized GO as the crosslinker. The pH‐sensitivity of PNIPAM/CS/GO hydrogels is evident below their volume phase transition temperature. Moreover, the PNIPAM/CS/GO hydrogels have a much better mechanical property compared with traditional hydrogels even in a high water content of 90%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41530.     

Swelling behavior of physical and chemical DNA hydrogels

DNA hydrogels were prepared from aqueous solutions of double‐stranded DNA (about 2000 base pairs long) by physical and chemical means. Physical gels were obtained via denaturation–renaturation cycle of 5% aqueous DNA solutions between 25 and 90°C. Although physical DNA gels exhibit a high modulus of elasticity, the crosslinks holding the DNA network together are destroyed during the expansion of gels in water or in dilute salt solutions. It was shown that these gels can be used for the controlled release of DNA in aqueous media. Chemical DNA gels formed using ethylene glycol diglycidyl ether crosslinker are stable in water with a wide range of swelling ratios that could be adjusted by the amount of DNA at the gel preparation. Swelling behavior of chemical DNA gels in acetone/water mixtures as well as in aqueous salt solutions is very similar to that of synthetic polyelectrolyte hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Adsorption of methylene blue on hemicellulose‐based stimuli‐responsive porous hydrogel

A stimuli‐responsive porous hydrogel was synthesized from wheat straw hemicellulose using CaCO₃ as the porogen, and its application for the removal of methylene blue was studied. The porous structure of the prepared hydrogel was confirmed by SEM analysis. The effects of pH and polyelectrolyte on the swelling of the hydrogels were discussed, and the porous hydrogels showed excellent sensitivity to pH and salt. The deswelling kinetic study indicated that the hydrogels exhibited rapid shrinking in NaCl aqueous solutions. The methylene blue adsorption on the hydrogels was investigated, and the obtained adsorption data was fitted to the pseudo‐first‐order, pseudo‐second‐order and intra‐particle diffusion kinetics models, and the pseudo‐first‐order kinetic model could describe the adsorption process, and the adsorption process of methylene blue on the hydrogels was controlled by external film diffusion. This study reported that the hemicellulose‐based porous hydrogel is promising for water treatment. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41606.     

Temperature‐, pH‐, and ion‐stimulus‐responsive swelling behaviors of poly(dimethylaminoethyl methacrylate) gel containing cholic acid

Poly(dimethylaminoethyl methacrylate) hydrogels containing cholic acid (PDMAEMA–CA) were synthesized by radiation crosslinking. The introduction of 10 and 20 mol% cholic acid (CA) into the poly(dimethylaminoethyl methacrylate) (PDMAEMA) hydrogel decreased the maximum swelling ratio (SR) of the gel from 40 to 6 and 5, respectively. The incorporation of CA with dimethylaminoethyl methacrylate led to a decrease in the lower critical swelling temperature of the gel from 44 to 42°C but did not exert big influence on the ion‐stimulus‐responsive properties of the gel. However, the pH sensitivity of the PDMAEMA–CA gel was quite different from that of PDMAEMA gel. The SR of PDMAEMA gel decreased at pH 2.5, whereas the SRs of the PDMAEMA–CA gels showed a convex‐upward function of pH; that is, SR of the PDMAEMA–10% CA gel first increased (pH 1.2–3.2) and then decreased (pH 3.2–11.9) with increasing pH. The pH‐stimulus‐responsive swelling behavior of the PDMAEMA–20% CA gel was similar to that of the PDMAEMA–10% CA gel except for the unique swelling behavior exhibited in the lower pH region. The unique decrease in SR in strong acidic solutions was attributed to aggregations driven by the hydrophobic interactions between CA molecules. Phase separation of the gel in strongly acidic solutions was observed; that is, the margin of the swollen gel was transparent and elastic (cellular structure), whereas the core of it was opaque (aggregated structure) as recorded by scanning electron microscopy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39998.     

Novel hydrogels of PVP–CMC and their swelling effect on viscoelastic properties

Polyvinylpyrrolidone (PVP) and carboxymethyl cellulose (CMC) mixed hydrogels were prepared by heat treatment. The physical characteristics of the hydrogels were studied by Fourier transform infrared spectroscopy and scanning electron microscopy. The swelling study of the hydrogels in water shows remarkable water absorption property. The swelling effect on the rheological behavior of PVP‐, PVP–CMC‐, and CMC‐based hydrogels was investigated to judge its application on uneven surface of body. The rheological properties (storage modulus, loss modulus, and complex viscosity) of samples before drying and swelled (15, 30, and 60 min) were measured against angular frequency and composition. The hydrogel containing PVP/CMC ratio of 20 : 80 appeared to be the best hydrogel from rheological and water absorbent points of view. These properties and low cost of the materials utilized in this work suggest that this hydrogel is a viable alternative product for dressing materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fast‐swelling superabsorbent polymers with polymerizable macromolecular surfactant as crosslinker

Fast‐swelling superabsorbent polymers (SAPs) have been prepared by micellar cross‐linking copolymerization of acrylic acid and acrylamide using polymerizable macromolecular surfactants (PMSs) as multifunctional crosslinkers, with a foaming technique. Sodium bicarbonate (NaHCO₃)/acetone and Pluronic F127 were used as foam (or porosity) generators and stabilizer, respectively. It has been found that the PMSs with different polyethylene glycol (PEG) chain length have little effect on the swelling rate of the SAPs, while the foam generators are crucial. In addition, the monomer concentration and the concentration of the PMS are important to the fast swelling rate of the SAPs. For a balance of a relatively fast‐swelling rate, high water absorbency under load and low cost in drying, a monomer concentration of above 50%, 0.08% PMS, and 5% NaHCO₃ are preferable. The water absorbency of SAP prepared under optimal conditions could reach half of equilibrium water absorbency in 30 seconds and the saline water absorbency under load could reach 18.4 g/g. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44173.     

A poly(γ‐glutamic acid)‐based hydrogel loaded with superoxide dismutase for wound healing

The purpose of this study was to develop a poly(γ‐glutamic acid) (γ‐PGA)‐based hydrogel loaded with superoxide dismutase (SOD) to accelerate wound healing. First, γ‐PGA was modified with taurine (γ‐PGAS), and then the SOD‐loaded γ‐PGAS/γ‐PGA hydrogel (SOD‐PGAS/PGA‐H) was prepared by cross‐linking of ethylene glycol diglycidyl ether. The swelling behavior and water vapor transmission rate revealed that PGAS/PGA‐H could create a moist environment for wound surface. In vitro kinetics of SOD release showed that SOD released from PGAS/PGA‐H maintained high activity and SOD‐PGAS/PGA‐H effectively scavenged the superoxide anion. The results of our fibroblast proliferation experiments showed that PGAS/PGA‐H had good cytocompatibility. The effects of SOD‐PGAS/PGA‐H on wound healing were examined in a Type I diabetic rat model with full‐thickness wounds. Twenty‐one days after grafted to wounds, SOD‐PGAS/PGA‐H exhibited a higher rate of wound healing than control group and showed increased collagen deposition and epithelialization. SOD‐PGAS/PGA‐H seems to promote better wound healing and thus might be a promising candidate for wound healing management. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42033.     

Preparation and swelling properties of solution crosslinked poly(cis‐1,4‐butadiene) gels

Poly(cis‐1,4‐butadiene) (PCB) gels were prepared by the crosslinking polymerization of 4‐tert‐butylstyrene (tBS) and divinylbenzene (DVB) onto unvulcanized butadiene rubber with a solution polymerization technique with benzoyl peroxide (BPO) as an initiator. The effects of the reaction conditions, such as the amount of the solvent, the amount of DVB and tBS, and the initiator (BPO), on the equilibrium swelling ratio (Q_e) were also investigated. The highest oil absorbencies of crosslinked gels in xylene and cyclohexane were 51.35 and 32.98 g/g, respectively. A swelling kinetic equation was proposed for this system: Q_t = Q_e ? {Kt + [1/(Q_e ? Q₀)]}^?1, where Q_t is the swelling ratio at time t, Q₀ is the initial swelling ratio, and K is the swelling kinetic constant. This equation fit the experimental results quite well. The diffusion of organic solvents in PCB gels was Fickian. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2241–2245, 2003     

Preparation and swelling behavior of macroporous poly(acrylamide‐co‐sodium methacrylate) superabsorbent hydrogels

Macroporous superabsorbent hydrogels (SAHs) composed of acrylamide (AAm) and sodium methacrylate (NMA) were prepared by aqueous solution polymerization in the presence of a glucose solution. Their swelling capacity was investigated as a function of the concentrations of the glucose solution, sodium methacrylate, crosslinker, initiator, and activator. The porosity of the poly(acrylamide‐co‐sodium methacrylate) superabsorbent hydrogels was confirmed using scanning electron microscopy. The SAHs were characterized by IR spectroscopy. To estimate the effect on the swelling behavior, three types of crosslinkers were employed: N,N′‐methylenebisacrylamide, 1,4‐butanediol diacrylate, and diallyl phthalate. Network structural parameters such as initial swelling rate, swelling rate constant, and maximum equilibrium swelling were evaluated by water absorption measurement. The equilibrium water content (EWC%) of the AAm–NMA macroporous SAHs was found to be in the range of 93.31–99.68, indicating that these SAHs may have applications as biomaterials in the medicinal, pharmaceutical, and veterinary fields. Most of the SAHs prepared in this investigation followed non‐Fickian‐type diffusion, and few followed a case II– or super–case II‐type diffusion. The diffusion coefficients of these macroporous SAHs were investigated. Further, the swelling behavior of these SAHs also was investigated at different pHs and in different salt solutions and simulated biological fluids. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3202–3214, 2006     

Development of microbial protective Kolliphor‐based nanocomposite hydrogels

In this scientific work, a novel class of antimicrobial nanocomposite hydrogels were designed and synthesized by chemical and environmentally bioprocess using Kolliphor, acrylamide, and mint leafs in order to achieve antiseptic property for wound applications. In the bioprocess approach, silver nitrate and gold chloride were nucleated with mint leafs in order to obtain effective free individual nano‐inorganic compounds to provide superior antibacterial assets. The formations of dual inorganic nanoparticles were confirmed by transmission electron microscopy, which indicated the size of nanoparticles in the range of approximately 3 ± 2 nm and without agglomeration. The formations of biomaterials were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopic–energy dispersive spectrometric studies and their swelling properties were determined. Furthermore, the pure hydrogel and the dual inorganic nanocomposite hydrogels developed were tested for antibacterial activities. When compared with the neat hydrogel, the nanocomposite hydrogels significantly improved their anti‐bacterial activities on Bacillus bacterium. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42781.     

Orientational behaviors of silk fibroin hydrogels

In this study, a novel shear‐induced silk fibroin (SF) hydrogel with three‐dimensional (3D) anisotropic and oriented gel skeleton/network morphology is presented. Amphipathic anionic and nontoxic sodium surfactin is blended with the SF to decrease its gelation time during the mechanical shearing process. The fibroin/surfactin blended solutions undergo a facial shearing process to accomplish a sol–gel transition within 1 hour. The dynamic sol–gel transition kinetic analysis, gel skeleton/network morphology, and mechanical property measurements are determined in order to visualize the fibroin/surfactin sol–gel transition during the shearing process and its resulting hydrogel. The results demonstrate that there is significant β‐sheet assembly from random coil conformations in the fibroin/surfactin blended system during the facile shearing process. The SF β‐sheets further transform into a fibrous large‐scale aggregation with orientational and parallel arrangements to the shearing direction. The shear‐induced fibroin/surfactin hydrogel exhibits notable anisotropic and oriented 3D skeleton/network morphology and a significant mechanical compressive strength in proportion to the shearing stress, compared with the control fibroin/surfactin hydrogel undergoing no shearing process. Due to its oriented gel skeleton/network structure and significantly enhanced mechanical properties, the shear‐induced fibroin/surfactin gel may be suitable as a biomaterial in 3D oriented tissue regeneration, including for nerves, the cultivation of bone cells, and the repair of defects in muscle and ligament tissues. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45050.