Investigation of the behavior of hydrogen‐bonded phenolic compounds and their determination by using poly(vinylferrocenium)–polyaniline composite film

The hydrogen bonding between phenolic compounds (phenol (Ph), catechol (Ct), resorcinol (Rs), and hydroquinone (Hq)) is investigated at pH 4. The oxidation behaviors of total phenolic compounds (TotPh) are different from their individual behaviors due to the existence of intermolecular hydrogen‐bonded oligomeric clusters. Theoretical calculations and voltammetric and spectroscopic evidences support the intermolecular hydrogen bonding. The interaction of the phenolic compounds with polyaniline (PANI) and poly(vinylferrocenium) (PVF⁺) films are also investigated electrochemically and spectroscopically. The phenolic molecules are immobilized in both polymers due to the construction of hydrogen bonds by PANI and the complexation with PVF⁺. In addition, Ct and Hq are catalytically oxidized by PANI. Determinations of Ct and TotPh are performed on PVF⁺–PANI composite ‐ coated Pt electrode using amperometric I–t method. Composite coating exhibits significant electrochemical activity toward Ct and TotPh, with high sensitivity and a wide linearity range. The steady‐state currents versus concentration of Ct and TotPh are found to be linear in the range of 1.35 × 10^?3?50.0 mM and 4.10 × 10^?4?560 mM for two linear regions, respectively. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43596.     

Application of a C6‐OH of chitosan immobilized cyclodextrin derivates on an electrochemical H2O2 biosensor

Biosensor detecting techniques have attracted much attention in the content determination of H₂O₂, which has been used illegally as a food additive. An electrochemical biosensing membrane for the detection of H₂O₂ was developed with C6‐OH of chitosan immobilized cyclodextrin derivates (6‐CD–CTS), which possessed a high cyclodextrin loading capacity (2.12 × 10^?4 mol/g), as the carrier. The biosensor was prepared through the inclusion of ferrocene as the electron mediator in a hydrophobic cavity of cyclodextrin and crosslinking catalase (CAT) to 2‐NH₂ of 6‐CD–CTS. The ferrocene‐included complex was evaluated by ultraviolet–visible spectrophotometry and thermogravimetric analysis. Its electrochemical behavior was also studied. The impact of the reaction conditions on the CAT immobilization capacity was evaluated. When previous membrane was used to detect the concentration of H₂O₂ (C_H2O2), we found that the catalysis of CAT and the signal amplification of ferrocene had a major impact on the cyclic voltammograms. The optimal working pH of the modified electrode was 7.0. The peak current (I) had a linear relationship with the H₂O₂ concentration (CH₂O₂) in the range 1.0 × 10^?4 to 1.0 × 10^?3 mol/L. The linear regression equation was I = 0.00475C_H2O2 ? 0.03025. The detection limit was 10^?6 mol/L. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41499.     

Development of an amperometric biosensor based on a redox‐mediator‐doped polypyrrole film

An amperometric biosensor was developed for the quantitative estimation of phenolic compounds in aqueous media. The enzyme tyrosinase [poly(phenol oxidase) (PPO)] was adsorbed onto a hexacyanoferrate(II)‐ion‐doped conducting polypyrrole (PPY) film deposited on an indium tin oxide (ITO) coated glass‐plate support. The PPO activity in the PPO/Fe²⁺‐PPY/ITO film was assayed as a function of the concentration of phenolic compounds. Cyclic voltammetric studies were carried out on this enzyme electrode, and the surface morphology of the enzyme‐immobilized polymer film was studied with scanning electron microscopy. The results of the amperometric response of the PPO/Fe²⁺‐PPY/ITO film showed sensitivities of 0.14, 0.21, and 0.36 A M^?1cm^?2 and linear response ranges of 9.9–84.7, 6.7–72.6, and 3.9–48.8 μM for phenol, catechol, and p‐chlorophenol, respectively. The PPO/Fe²⁺‐PPY/ITO electrode exhibited a response time of about 50 s and was stable for about 12 weeks at 4°C. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 927–933, 2004     

Polypyrrole–multiwalled carbon nanotubes composites as immobilizing matrices of ascorbate oxidase for the facile fabrication of an amperometric vitamin C biosensor

An amperometric vitamin C biosensor was facilely fabricated by the immobilization of ascorbate oxidase (AO) on polypyrrole (PPy)–multiwalled carbon nanotubes (MWCNTs) composites with a one‐step electrodeposition technique in a 0.05M phosphate buffer solution (pH 6.5). The cyclic voltammetry, IR spectral analysis, electrochemical impedance spectroscopy, and scanning electron microscopy measurements indicated that AO was successfully immobilized on the PPy–MWCNT composites. The optimization of the biosensor parameters, including the working potential, pH, and temperature, was investigated in detail. The proposed biosensor showed a linear range of 5 × 10^?5 to 2 × 10^?2 M with a detection limit of 0.3 μM, a sensitivity of 25.9 mA mM^?1 cm^?2, and a current response time less than 20 s under the optimized conditions. The apparent Michaelis–Menten constant together with the apparent activation energy indicated that the proposed biosensor exhibited a high bioaffinity and a good enzyme activity. In addition, the biosensor also showed good operational and storage stabilities. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Immobilization of invertase onto dimer acid‐co‐alkyl polyamine

Invertase was immobilized onto the dimer acid‐co‐alkyl polyamine after activation with 1,2‐diamine ethane and 1,3‐diamine propane. The effects of pH, temperature, substrate concentration, and storage stability on free and immobilized invertase were investigated. Kinetic parameters were calculated as 18.2 mM for K_m and 6.43 × 10^?5 mol dm^?3 min^?1 for V_max of free enzyme and in the range of 23.8–35.3 mM for K_m and 7.97–11.71 × 10^?5 mol dm^?3 min^?1 for V_max of immobilized enzyme. After storage at 4°C for 1 month, the enzyme activities were 21.0 and 60.0–70.0% of the initial activity for free and immobilized enzyme, respectively. The optimum pH values for free and immobilized enzymes were determined as 4.5. The optimum temperatures for free and immobilized enzymes were 45 and 50°C, respectively. After using immobilized enzyme in 3 days for 43 times, it showed 76–80% of its original activity. As a result of immobilization, thermal and storage stabilities were increased. The aim of this study was to increase the storage stability and reuse number of the immobilized enzyme and also to compare this immobilization method with others with respect to storage stability and reuse number. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1526–1530, 2004     

Electrochemical preparation of poly(N‐acetylaniline)/poly‐(4‐styrenesulfonic acid‐co‐maleic acid) composite film towards ascorbic acid sensing

Poly(N‐acetylaniline)/poly(4‐styrenesulfonic acid‐co‐maleic acid) (PNAANI/PSSMA) composite film was prepared by cyclic voltammetry (CV), and was characterized by FTIR and X‐ray photoelectron spectrum (XPS). The electroactivity of the composite film was high in neutral and basic solutions, and it had been used for amperometric determination of ascorbic acid (AA). Compared with pure PNAANI film, the catalytic activity of the composite film was much better. AA was detected amperometrically in sodium citrate buffer at a potential of 0.3 V (versus SCE). The response current was proportional to the concentration of ascorbic acid in the range of 4.7 × 10^?6 to 5.0 × 10^?5M and 5.0 × 10^?5 to 2.5 × 10^?3M, respectively, with the detection limit of 1.9 × 10^?6 mol L^?1 at a signal to noise ratio 3. In addition, the stability and reusability of the composite film were performed well, and it was satisfying to be used for determination of AA in real fruit juice samples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Immobilization of glucoamylase on the plain and on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres

Immobilization glucoamylase onto plain and a six‐carbon spacer arm (i.e., hexamethylene diamine, HMDA) attached poly(2‐hydroxyethylmethacrylate‐ethyleneglycol dimethacrylate) [poly(HEMA‐EGDMA] microspheres was studied. The microspheres were prepared by suspension polymerization and the spacer arm was attached covalently by the reaction of carbonyl groups of poly(HEMA‐EGDMA). Glucoamylase was then covalently immobilized either on the plain of microspheres via CNBr activation or on the spacer arm‐attached microspheres via CNBr activation and/or using carbodiimide (CDI) as a coupling agent. Incorporation of the spacer arm resulted an increase in the apparent activity of the immobilized enzyme with respect to enzyme immobilized on the plain of the microspheres. The activity yield of the immobilized glucoamylase on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres was 63% for CDI coupling and 82% for CNBr coupling. This was 44% for the enzyme, which was immobilized on the plain of the unmodified poly(HEMA‐EGDMA) microspheres via CNBr coupling. The K_m values for the immobilized glucoamylase preparations (on the spacer arm‐attached microspheres) via CDI coupling 0.9% dextrin (w/v) and CNBr coupling 0.6% dextrin (w/v) were higher than that of the free enzyme 0.2% dextrin (w/v).The temperature profiles were broader for both immobilized preparations than that of the free enzyme. The operational inactivation rate constants (k_iop) of immobilized enzymes were found to be 1.42 × 10^?5 min^?1 for CNBr coupled and 3.23 × 10^?5 min^?1 for CDI coupled glucoamylase. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2702–2710, 2001     

Dynamic adsorption behaviors between Cu2+ ion and water‐insoluble amphoteric starch in aqueous solutions

Dynamic adsorption behavior between Cu²⁺ ion and water‐insoluble amphoteric starch was investigated. The sorption process occurs in two stages: external mass transport occurs in the early stage and intraparticle diffusion occurs in the long‐term stage. The diffusion rate of Cu²⁺ ion in both stages is concentration dependent. In the external mass‐transport process, the diffusion coefficient (D₁) increases with increasing initial concentration in the low‐ (1 × 10^?3‐4 × 10^?3M) and high‐concentration regions (6 × 10^?3‐10 × 10^?3M). The values of adsorption activation energy (k_d1) in the low‐ and high‐concentration regions are 15.46–24.67 and ?1.80 to ?11.57 kJ/mol, respectively. In the intraparticle diffusion process, the diffusion coefficient (D₂) increases with increasing initial concentration in the low‐concentration region (1 × 10^?3‐2 × 10^?3M) and decreases with increasing initial concentration in the high‐concentration region (4 × 10^?3‐10 × 10^?3M). The k_d2 values in the low‐ and high‐concentration regions are 9.96–15.30 and ?15.53 to ?10.71 kJ/mol, respectively. These results indicate that the diffusion process is endothermic in the low‐concentration region and is exothermic in the high‐concentration region for both stages. The external mass‐transport process is more concentration dependent than the intraparticle diffusion process in the high‐concentration region, and the dependence of concentration for both processes is about equal in the low‐concentration region. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2849–2855, 2001     

Ultrafast preparation of branched poly(methyl Acrylate) through single electron transfer living radical polymerization at room temperature

Ultrafast preparation of branched poly(methyl acrylate) (BPMA) with high‐molecular weight through single electron transfer living radical polymerization (SET‐LRP) of inimer at 25°C has been attempted, atom transfer radical polymerization (ATRP) at 60°C was also carried out for comparison. Gas chromatography, proton nuclear magnetic resonance, and triple detection size exclusion chromatography were used to analyze these polymerizations. As expected, SET‐LRP system showed much faster polymerization rate than ATRP system, the calculated apparent propagation rate constants (k_p^app) are 3.69 × 10^?2 min^?1 and 6.23 × 10^?3 min^?1 for SET‐LRP and ATRP system, respectively. BPMA with high‐molecular weight (M_w._MALLS = 86,400 g mol^?1) compared with that in ATRP (M_w.MALLS = 61,400 g mol^?1) has been prepared. POLYM. ENG. SCI., 54:1579–1584, 2014. © 2013 Society of Plastics Engineers     

Immobilization of pepsin on an acrylamide/2‐hydroxyethyl methacrylate copolymer and its use in casein hydrolysis

Pepsin was immobilized through covalent bonding on a copolymer of acrylamide and 2‐hydroxyethyl methacrylate via the individual and simultaneous activation of both groups. The extent of enzyme coupling upon the activation of both the amino and hydroxyl groups of the copolymer resulted in a synergistic effect. However, the order of activation of the support was critical. The covalently bound enzyme retained more than 50% of its activity even after six cycles. The storage stability of the covalently bound enzyme was 60% after storage for 1 month, whereas the free enzyme lost all of its activity within 10 days of storage at 35°C. The Michaelis constant (K_m) and maximum reaction velocity (V_max) were 1.1 × 10^?6 and 0.87 for the free enzyme and 1.2 × 10^?6 and 0.98 for the covalently bound enzyme when the enzyme concentration was kept constant and the substrate concentration was varied. Similarly, K_m and V_max were 6.73 × 10^?11 and 0.47 for the free enzyme and 7.59 × 10^?11 and 0.545 for the covalently bound enzyme when the substrate concentration was kept constant and the enzyme concentration was varied; this indicated no conformational change during coupling, but the reaction was concentration‐dependent. The hydrolysis of casein was carried out with a fixed‐bed reactor (17 cm × 1 cm). Maximum hydrolysis (90%) was obtained at a 2 cm³/min flow rate at 35°C with a 1 mM casein solution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1544–1549, 2005     

Electrocatalysis and determination of uracil on polythionine/multiwall carbon nanotubes modified electrode

A new type of poly (thionine)/multiwall carbon nanotube/glassy carbon (PTH/MWNTs/GC) electrode was fabricated by electropolymerization thionine onto the surface of MWNTs modified GC electrode. The properties and behaviors of the modified electrode were characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV). The results show that the high sensitivity and selectivity are mainly caused by the unique carbon surface of the carbon nanotubes and the catalytic activity of thionine. The modified electrode exhibited excellent electrocatalytic behavior to the oxidation of uracil, and was firstly applied to determinate the concentration of uracil for the differential pulse voltammograms. Under the optimum conditions, linear calibration equation was obtained over the uracil concentration range from 1.0 × 10^?5 to 5.5 × 10^?2M with a correlation coefficient of 0.9978 and a detection limit 2.0 × 10^?7M (based on S/N = 3) was also gained. The good electrocatalytic response of uracil at PTH/MWNTs/GC electrode suggests that the PTH/MWNTs are an excellent platform for electrochemical biosensing. The modified electrode displays excellent repeatability, stability, and high sensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of acrylic acid onto methylcellulose by potassium permanganate‐p‐xylene redox pair

Poly(acrylic acid) was grafted onto methylcellulose in aqueous media by a potassium permanganate‐p‐xylene redox pair. Within the concentration range from 0.93 × 10^?3 to 9.33 × 10^?3M, p‐xylene, the graft copolymerization reaction exhibited minimum and maximum graft yields and was associated with two precursor‐initiating species, a p‐xylyl radical and its diradical derivative. The efficiency of the graft was low, not higher than 12.9% at a p‐xylene concentration of 0.93 × 10^?3M and suggested the dominance of a competitive homopolymerization reaction under homogeneous conditions. The effect of permanganate on the graft yield was normal and optimal at 135% graft yield, corresponding to a concentration of the latter of 33.3 × 10^?3M over the range from 8.3 × 10^?3 to 66.7 × 10^?3M. The conversion in graft yield showed a negative dependence on temperature in the range 30–60°C and suggested a preponderance of high activation energy transfer reaction processes. The calculated composite activation energy for the graft copolymerization was 7.6 kcal/mol. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 278–281, 2004     

Facile synthesis of graphene/polypyrrole 3D composite for a high‐sensitivity non‐enzymatic dopamine detection

One kind of nanocomposite consisting of graphene and polypyrrole was synthesized via a facile and mild way with the assistant of microwave irradiation. The synthesis route was embedding the polypyrrole into the graphene flakes to form a 3D structure, to achieve larger active surface and higher electro‐catalysis property. Structures and components of the composite were measured by X‐ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. A stronger electrochemical response of electrode with modified resultant was observed in the electrochemical test. Dopamine sensor based on the composite showed a sensitivity of 363 μA mM ^?1 cm^?2, a linear range of 1 × 10^?4 M to 1 × 10^?3 M , and a detection limit of 2.3 × 10^?6 M (S/N = 3). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44840.     

Synthesis and characterization of polyaniline/NiO nanocomposite

Spherical nickel oxide (NiO) nanoparticles were prepared by using nickel chloride as precursor in the ethylene glycol as solvent and urea as precipitant. The X‐ray diffraction study showed that NiO has single‐phase cubic structure with average crystallite size of 35 nm. The prepared NiO nanoparticles were incorporated into polyaniline (PANI) matrix during in situ chemical oxidative polymerization of aniline with different molar ratios of aniline: NiO (12 : 1, 6 : 1, and 3 : 1) at 5°C using (NH₄)₂S₂O₈ as oxidant in aqueous solution of sodium dodecylbenzene sulfonic acid, as surfactant and dopant under N₂ atmosphere. The synthesized composites have been characterized by means of X‐ray diffraction (XRD), thermogravimetric analysis, Fourier transform infrared (FTIR), scanning electron microscopy, TEM, and vibrating sample magnetometer for its structural, thermal, morphological, and magnetic investigation. The XRD and FTIR studies show that the NiO particles are in the composite. The room temperature conductivities of the synthesized PANI, PANI/NiO (12 : 1), (6 : 1), and (3 : 1) composites were found to be 3.26 × 10^?4, 1.88 × 10^?4, 1.5 × 10^?4, and 4.61 × 10^?4 S/cm, respectively. The coercivity (H_c) and remnant magnetization (M_r) of NiO, PANI/NiO NCs (12 : 1), (6 : 1), and (3 : 1) at 5 K was found to be 8.22 × 10^?2, 6.31 × 10^?2, 6.42 × 10^?2, 6.27 × 10^?2 T, and 6.64 × 10^?3, 1.83 × 10^?4, 3.07 × 10^?4, and 3.98 × 10^?4 emu/g, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Trametes versicolor laccase immobilized poly(glycidyl methacrylate) based cryogels for phenol degradation from aqueous media

This study aims removal of phenols in wastewater by enzymatic oxidation method. In this study, Trametes versicolor laccase was covalently immobilized onto a cryogel matrix by the nucleophilic attack of amino groups of laccase to epoxy groups of matrix. Glycidyl methacrylate was chosen as functional monomer to prepare poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) [p(HEMA‐co‐GMA)] cryogels. The enzyme immobilized matrix was characterized by FTIR, SEM, and swelling tests. The effect of pH, reaction time, temperature, substrate concentration, enzyme concentration, and storage period on immobilized enzyme activity was determined and compared with those of free enzyme. The model substrate was 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid (ABTS). Lineweaver‐Burk plots were used to calculate K_m and V_m values. K_m values were 165.1 and 156.0 µM while V_m values were 55.2 µM min^?1 and 1.57 µM min^?1 for free and immobilized laccase, respectively. Immobilized enzyme was determined to retain 82.5% and 72.0% of the original activity, respectively, after 6 consecutive use and storage period of 4 weeks. The free enzyme retained only 24.0% of its original activity following the same storage period. Lastly, decomposition products resulting from enzymatic oxidation of a model phenolic compound (3,5‐dinitrosalicylic acid) in aqueous solution were identified by liquid chromatography‐tandem mass spectrometry (LC‐MS/MS). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41981.     

Determination of hydroquinone using poly(3‐methylthiophene) synthesized electrochemically on pt electrode in methylene chloride

Poly(3‐methylthiophene) (P3MT) film was synthesized by potentiodynamic method on Pt electrode in methylene chloride solution containing 0.10M tetrabuthlammonium perchlorate supporting electrolyte and used for the determination of hydroquinone (HQ) with amperometric I–t method in solution consisting of NaHSO₄/Na₂SO₄ (SBS; pH 2.0). This modified electrode has a lower working potential and good operational stability due to reducing electrode fouling when compared with the direct oxidation of HQ at the bare Pt electrode. Limit of detection, limit of quantification, and the linear response range were found to be 1.32 × 10^?5 mM, 4.41 × 10^?5 mM, and between 4.41 × 10^?5 – 50.0 mM (R² = 0.997), at 0.50 V versus saturated calomel electrode, respectively. HQ determination in complex matrix was checked using real samples to demonstrate the applicability of modified electrode. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40859.     

Effect of side‐chain functionality on the organic field‐effect transistor performance of oligo(p‐phenylenevinylene) derivatives

In order to observe the effects of the substitution of electronegative flourine with aromatic groups in oligo(p ‐phenylenevinylene) compounds on their packing, morphology, and charge carrier mobility, we have synthesized napthol‐substituted oligo(p ‐phenylenevinylene) compounds and examined their solubility, redox properties, thin film morphologies, and charge carrier properties. To date, very few examples of conjugated oligomers bearing napthol side groups have been reported in the literature. After annealing at 150 °C, the mobility of S1, S2, and S3 was 4.0 × 10^?2 cm² V^?1 s^?1, 1.2 × 10^?2 cm² V^?1 s^?1, and 2.6 × 10^?3 cm² V^?1 s^?1, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44825.     

Oxo‐biodegradability of high‐density polyethylene films containing limited amount of isotactic polypropylene

Limited amount of isotactic polypropylene (iPP) is added to high‐density polyethylene (HDPE) containing 1% w/w an oxo‐biodegradable additive and extruded and converted to films. The films are put under UV irradiation for different periods of time. Irradiation of the films for 6 weeks imposes remarkable effects on viscosity average molecular weight (M_v) and carbonyl index (CI) of them. M_v decreases from 3.4 × 10⁵ to 4.7 × 10⁴ g mol^?1 for neat HDPE films; from 3.1 × 10⁵ to 3.3 × 10⁴ g mol^?1 for the films containing oxo compound, and from 1.5 × 10⁵ to 2.6 × 10⁴ g mol^?1 for the films containing oxo compound and 1% w/w iPP. Carbonyl index of the neat HDPE films increases from 4 to 8.7 while for the sample containing only the oxo compound it increases from 4.5 to 7.3 and for the sample containing both oxo compound and iPP it decreases from 12.0 to 8.8. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) indicate more cracks and uniform degradation in the samples containing iPP and oxo compound. Thermogravimetric analysis (TGA/DTG) of the samples shows that the samples containing iPP and oxo compound have lower decomposition temperature after UV irradiation. Finally, it can be said that the presence of iPP in HDPE matrix containing oxo compound can improve HDPE oxo‐biodegradablity. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45843.     

Light‐scattering study of poly(hydroxy ester ether) in N,N‐dimethylacetamide solution

Static and dynamic light‐scattering techniques were used to study biodegradable thermoplastic poly(hydroxy ester ether) in N,N‐dimethylacetamide (DMAc). A weight‐average molecular weight M_W = 6.4 × 10⁴ g/mol, radius of gyration R_G = 9.4 nm, second‐virial coefficient A₂ = 1.05 × 10^?3 mol mL/g², translational diffusion coefficient D = 1.34 × 10^?7 cm²/s, and hydrodynamic radius R_H = 8.3 nm are reported. In addition, the effect of H₂O on the polymer chain's conformation and architecture in a DMAc/H₂O solution is evaluated. Results suggest that H₂O makes the mixed solvent poorer as well as promotes polymer chain branching via intramolecular transesterification. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1737–1745, 2001     

Novel real-time method using the stopped-flow for evaluating bisphenol A degradation kinetics by molecular ozone and radical mechanisms

A novel real-time method was developed to evaluate the bisphenol A degradation kinetics by molecular ozone and radical pathway using the stopped-flow technique. The second-order kinetics was determined under pseudo-first-order conditions for the molecular pathway by the absolute rate constant method and for the radical pathway by the R_ct concept involving the hydroxyl radical and ozone ratio. Bisphenol A degradation by ozone was performed and evaluated at a pH ranging from 2 to 10. At pH?4?M^?1?s^?1 and for the radical pathway at pH?>?10, the constant was 3.43?×?10⁹?M^?1?s^?1. To validate the method, ciprofloxacin degradation kinetics was determined at pH 8 by radical pathway, in 4.55?×?10⁹?M^?1?s^?1. The method permits the determination of kinetic parameters for the design of chemical reactors; avoiding the generation of undesirable reactions and by-products in the degradation of emerging compounds.