Synthesis,film morphology,and performance of cationic fluorinated polyacrylate emulsion with core-shell structure

A novel cationic fluorinated polyacrylate emulsion (CFBDH) was prepared by polymerization of dodecafluoroheptyl methacrylate (DFMA) with butyl acrylate (BA), dimethylaminoethyl methacrylate (DM), and 2-hydroxypropyl acrylate (HpA) via seeded emulsion polymerization. Chemical structure, particle morphology, glass transition temperature, and thermal property of resultant CFBDH were characterized by FTIR, ¹H-NMR, TEM, DSC, and TGA, respectively. The as-synthesized product was utilized to treat the clean glass sheet and cotton fabric substrates, then morphology, components, hydrophobicity, and other performances of films on those substrates were investigated by SEM, AFM, XPS, and contact angle meter, etc. Results show that the target product possesses anticipative structure and its latex particles have uniform spherical core-shell structure with an average diameter of 126 nm. The core-shell CFBDH latex film thus has two T_g and its thermal property has been improved due to the introduction of fluorine-containing acrylate monomer. The CFBDH film on cotton fabric surface seems to be smooth compared to the blank by SEM. However, the CFBDH film on silicon-wafer is inhomogeneous and has many low or high peaks. At 2 nm data scale and in 1 μm² scanning field, the root mean square roughness of CFBDH film reaches to 0.205 nm. XPS analysis indicates the perfluoroalkyl groups have the tendency to enrich at the film-air interface. In addition, CFBDH can provide good hydrophobicity for the treated fabric and do not influence whiteness of the treated fabric indeed. However it will make the treated fabric slightly stiff at high doses. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Fabrication of superhydrophobic fabric coating using microphase‐separated dodecafluoroheptyl‐containing polyacrylate and nanosilica

Superhydrophobic coating was developed on cotton fabric in this article using a dodecafluoroheptyl‐containing polyacrylate (DFPA) and nanosilica. Film morphology of DFPA on cotton fibers/fabrics and chemical compositions of the treated cotton fabric were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray photoelectron spectroscopy (XPS), respectively. DFPA could form a relatively even film on the cotton fabric/fiber under SEM observation; however, it presented a rough and microphase‐separated pattern under AFM observation. There were many mountain‐like protuberances. The height of the protuberances and the root mean square roughness (R_ms) of the film reached about 20–50 nm and 12.511 nm in 2 × 2‐μm² scanning field (as the scale data was 100 nm). XPS analysis indicated that the perfluoroalkyl groups had the tendency to enrich at the film–air interface. DFPA could make the treated cotton fabric with a water contact angle (WCA) at about 138.5°. Cotton fabric was previously roughened using a 1 wt % silica sol with an average particle size of 20–30 nm and then finished by DFPA; hydrophobicity of the resultant cotton fabric was strongly improved, and WCA could reach 153.6°. The color of this superhydrophobic fabric would not be influenced, but its softness decreased compared to untreated fabric. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,characterization, and film morphology of dodecylpolysiloxane

A novel polysiloxane softener bearing dodecyl side groups (dodecylpolysiloxane [DDPS]) was synthesized by copolymerization of octamethylcyclotetrasiloxane with dodecyltrimethoxysilane and hexamethyldisiloxane. Chemical structure and film morphology of the synthesized polysiloxane are characterized and investigated by infrared spectrum, ¹H‐NMR, field emission scanning electronic microscope, and atomic force microscope. The experiment results indicate that DDPS can form a hydrophobic film on both the cotton fiber and silicon wafer surface. At an amplification of <80,000 (of the original fiber) and the observation rule (working distance) of >200 nm, DDPS shows a relative smooth resin film on the treated fabric/fiber surface. But as the observation rule decreases to 2 nm—almost to a molecular scale—the DDPS film mostly exhibits an inhomogeneous structure and uneven morphology in its atomic force microscope images. There are many low or high peaks that appeared in DDPS topography. Consequently in 2 μm² scanning field, the root mean square roughness of DDPS film reaches to 0.199 nm, which is 2.46 times rougher as compared with that of polydimethylsiloxane film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4480–4486, 2006     

氟代丙烯酸酯共聚乳液FSLDH的成膜性、XPS表征与疏水性能

在双子型阳离子表面活性剂双十六烷基四甲基溴化乙二铵(21631)和非离子表面活性剂氟代脂肪醇聚氧乙烯醚等作用下,将全氟烷基乙基丙烯酸酯(FA)与甲基丙烯酸十八醇/十二醇酯(SLMA)、甲基丙烯酸二甲氨乙酯(DM)及丙烯酸羟丙酯(HPA)〔m(FA)∶m(SLMA)∶m(DM)∶m(HPA)=80∶16.5∶3∶0.5〕在水相乳液中共聚,制得了一种略带荧光的阳离子氟代聚丙烯酸酯FA-co-SLMA-co-DM-co-HPA(FSLDH)乳液。用红外光谱(IR)和核磁共振氢谱(1HNMR)表征了主组分的结构,然后用原子力显微镜(AFM)、光电子能谱仪(XPS)等仪器研究了FSLDH乳液在纤维表面的成膜形态及疏水性能。结果表明,FSLDH乳液可在纤维表面形成一层相对光滑的有机氟聚合物膜。在FSLDH处理后的纤维表面,存在F、O、N、C元素。用FSLDH乳液处理棉纤维织物,能明显改善织物的拒水拒油性能,当FSLDH乳液用量达到5 g/100 g H2O时,水在织物表面的静态接触角可达到144.9°,拒水性可达到90分,拒油等级达到5级。     

In situ preparation and properties of high‐solid‐content and low‐viscosity poly(methyl methacrylate/n‐butyl acrylate/acrylic acid)/poly(styrene/acrylic acid) composite latexes

With monodispersed poly(methyl methacrylate/n‐butyl acrylate/acrylic acid) [P(MMA/BA/AA)] seeded latex with a particle size of 485 nm and a solid content of 50 wt % as a medium, a series of stable P(MMA/BA/AA)/poly(styrene/acrylic acid) composite latexes with a high solid content (70 wt %) and low viscosities (500–1000 mPa · s when the shear rate was 21 s^?1) was prepared in situ via simple two‐step semicontinuous monomer adding technology. The coagulum ratio of polymerization was about 0.05 wt %. The particle size distribution of such latexes was bimodal, in which the large particle was about 589 nm and the small one was about 80 nm. The latexes combined good mechanical properties with good film‐forming properties. Differential scanning calorimetry showed that the corresponding latex film had a two‐phase structure. The morphology of the latex film was characterized with atomic force microscopy and scanning electron microscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1815–1825, 2007     

Preparation and surface properties of core‐shell polyacrylate latex containing fluorine and silicon in the shell

The core‐shell polyacrylate latex particles containing fluorine and silicon in the shell were successfully synthesized by a seed emulsion polymerization, using methyl methacrylate (MMA) and butyl acrylate (BA) as main monomers, dodecafluoroheptyl methacrylate (DFMA), and γ‐(methacryloxy) propyltrimethoxy silane (KH‐570) as functional monomers. The influence of the amount of fluorine and silicon monomers on the emulsion polymerization process and the surface properties of the latex films were discussed, and the surface free energy of latex films were estimated using two different theoretical models. The emulsion and its films were characterized by particle size distribution (PSD) analysis, transmission electron microscopy (TEM), Fourier transform infrared spectrum (FTIR), nuclear magnetic resonance (¹H‐NMR and ¹⁹F‐NMR) spectrometry, contact angle (CA) and X‐ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), and thermogravimetry (TG) analysis. The results indicate that the average particle size of the latex particles is about 160 nm and the PSD is narrow, the synthesized latex particles exist with core‐shell structure, and a gradient distribution of fluorine and silicon exist in the latex films. In addition, both the hydrophobicity and thermal stability of the latex films are greatly improved because of the enrichment of fluorine and silicon at the film‐air interface, and the surface free energy is as low as 15.4 mN/m, which is comparable to that of polytetrafluoroethylene (PTFE). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Structural variation in soft segment of waterborne polyurethane acrylate nanoemulsions

High solid content waterborne polyurethane acrylate (WPUA) nanoemulsions are prepared as textile finishes. Two structurally different soft segments, that is, polyether and polyester are used with isophorone diisocyanate, 2‐hydroxyethyl methacrylate, and butyl acrylate. Structural variations are investigated in features of nanoemulsions and their coatings. Physical properties of nanoemulsions, such as average particle size, stability, solid content, and viscosity, are investigated. Nanoemulsions with high solid content, that is, 40–47% are produced without any internal emulsifier. Average nanoparticle size, that is, <100 nm is confirmed by dynamic light scattering and atomic force microscopy (AFM). Fourier transform infrared spectroscopy proved synthesis of proposed WPUA products. Synergistic effect of polyurethane and acrylate is observed in chemical and water resistance of WPUA. Differential scanning calorimetry (DSC) and thermogravimetric analysis indicate stable uniformly cross‐linked network of WPUA. Application of nanoemulsions on 100% cotton fabric shows a significant improvement in tear strength, which is more pronounced for polyester‐based WPUA. Scanning electron microscope images of treated fabric samples show good adhesion of nanoemulsions on cotton surface. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41706.     

Preparation of fluorescent pigment latex and its application on binder‐free printing of cotton fabrics

The recognized disadvantages of pigment printing are the stiff hand feel owing to the large particle size of the binder and pigments and the crosslinked binder introducing rigidity. In the current study, fluorescent pigment latex (FPL) was prepared via mini‐emulsion polymerization and further applied on cotton fabric printing in the absence of binder. The mini‐emulsions were prepared by dispersing the fluorescein in the monomers methyl methacrylate (MMA) and butyl acrylate (BA) with DNS‐86 as emulsifier, hexadecane as co‐emulsifier, and ammonium persulfate as initiator. The Fourier‐transform infrared‐attenuated total refraction, transmission electron microscopy, differential scanning calorimetry, and thermogravimetric analysis showed that the fluorescein was successfully encapsulated into P(MMA‐co‐BA) and the polymer content was 91.22%. The surface morphology study revealed that compact and smooth film was formed onto the surface of FPL printings, which resulted in better hand feel and rubbing fastness as compared to the conventional printings with a large amount of binder. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45826.     

Preparation and properties of core–shell nanosilica/poly(methyl methacrylate–butyl acrylate–2,2,2‐trifluoroethyl methacrylate) latex

A core–shell nanosilica (nano‐SiO₂)/fluorinated acrylic copolymer latex, where nano‐SiO₂ served as the core and a copolymer of butyl acrylate, methyl methacrylate, and 2,2,2‐trifluoroethyl methacrylate (TFEMA) served as the shell, was synthesized in this study by seed emulsion polymerization. The compatibility between the core and shell was enhanced by the introduction of vinyl trimethoxysilane on the surface of nano‐SiO₂. The morphology and particle size of the nano‐SiO₂/poly(methyl methacrylate–butyl acrylate–2,2,2‐trifluoroethyl methacrylate) [P(MMA–BA–TFEMA)] core–shell latex were characterized by transmission electron microscopy. The properties and surface energy of films formed by the nano‐SiO₂/P(MMA–BA–TFEMA) latex were analyzed by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy/energy‐dispersive X‐ray spectroscopy, and static contact angle measurement. The analyzed results indicate that the nano‐SiO₂/P(MMA–BA–TFEMA) latex presented uniform spherical core–shell particles about 45 nm in diameter. Favorable characteristics in the latex film and the lowest surface energy were obtained with 30 wt % TFEMA; this was due to the optimal migration of fluorine to the surface during film formation. The mechanical properties of the films were significantly improved by 1.0–1.5 wt % modified nano‐SiO₂. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Miniemulsion polymerization of fluorinated siloxane‐acrylate latex and the application as waterborne textile finishing agent

Fluorinated siloxane–acrylate polymer latex was synthesized via miniemulsion polymerization, which was carried out by pseudo one‐step method. In the synthesis protocol, the monomers of octamethylclotetrasiloxane (D₄), tetravinyltetramethylcyclotetrasiloxane (D₄^v), methyl methylacrylate, butyl acrylate, N‐methylol acrylamide, and dodecafluoroheptyl methacrylate (DFMA) were first mixed and homogenized into a miniemulsion, which was stabilized by dedecybenzene sulfonic acid. The ring‐opening polymerization of cyclosiloxane was then steadily performed under miniemulsion conditions and followed by the postaddition of radical initiators to initiate the polymerization of acrylate and DFMA monomers. The influences on the emulsion properties by acrylic monomer with different addition protocol were investigated in this work. In addition, the synthesized latexes were characterized by using dynamic laser scattering, transmission electron microscope, differential scanning calorimetry, and Fourier transform infrared spectroscopy. These results indicated that the introduction of D₄^v in the latex can successfully suppress the phase separation between the thermodynamically incompatible components for the formation of uniform hybrid latex particles. The further application of the as‐synthesized latex was investigated as a new kind of waterborne textile finishing agent. Moreover, the influences of the content of D₄^v and DFMA on the finishing properties, especially for the softness, the water repellence, and the antimoisture properties, were systematically studied in this work. With a proper design on the content of the D₄^v and DFMA, stable textile finishing emulsion was prepared, which can endow the fabric both desirable softness and excellent water resistances. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40161.     

A functional polysiloxane with benzophenone derivative ultraviolet absorbing side groups: Synthesis,morphology, and its performance on fabrics

A novel functional polysiloxane (PSBP) bearing benzophenone derivatives as UV absorbing side groups was synthesized by hydrosilylation of polyhydromethylsiloxane (PHMS) with 2‐hydroxy‐4‐(β‐hydroxy‐γ‐allyloxy)propyloxy benzophenone (HHAPB). The chemical structure, film morphology, and the softening fabric property of the synthesized polysiloxane were characterized and investigated by spectrum analysis, atomic force microscope (AFM), and Kawabata evaluation system. The experiment results indicated that PSBP was not only an excellent polymeric UV‐absorber, which showed intensive ultraviolet absorptions respectively, at wavelengths of 243.2, 288.2, and 325.4 nm, but could exhibit a nonhomogeneous, some rough structure film on silicon wafer substrate. In addition, the functional side group, benzophenone derivative as well as its mass ratio to PSBP has an influence on the performance of the synthesized polysiloxane. As the mass ratio decreased from 31.48 to 12.87%, the molar extinction coefficients ε_max (λ_max = 288.2 nm) of the PSBP fluids lowered from 3.4564 × 10⁵ to 1.5763 × 10⁵, but while the softening fabric properties of PSBP on cotton fabrics increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 680–687, 2007     

Surface structure and properties of water‐based polymer coating materials prepared by the complexation of two polymer latices with chemically complementary structures

In this study, water‐based polymer coating materials used for the surface coating of substrates with lower surface energies were prepared by the complexation of two‐component polymer latices containing polydimethylsiloxane (PDMS) and having chemically complementary structures. The film‐forming performance of the polymer latices and the surface structures and properties of the coatings formed by the polymer latices were studied by means of scanning electron microscopy and by the measurement of mechanical strength, thermal performance, water absorbability, and contact angle. When the two‐component polymer latices [the poly(methyl methacrylate‐co‐butyl acrylate‐co‐methyl acrylic acid)/polydimethylsiloxane system (PA latex) and the poly(methyl methacrylate‐co‐butyl acrylate‐co‐pyrrolidone)/polydimethylsiloxane system (PB latex)] were compared, the complex polymer latex formed by the complexation of the PA latex with the PB latex had the best film‐forming performance, with formed coatings that were more smooth and had fewer less cracks. Also, compared to the two coatings formed by the two‐component polymer latices, the coatings formed by the complex polymer latex had a unique structure, a higher mechanical strength and elongation, a higher decomposing temperature, and better water resistance. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1748–1754, 2003     

POSS/有机硅改性聚丙烯酸酯无氟防水剂的合成与应用研究

通过无皂乳液聚合技术合成了POSS/有机硅改性聚丙烯酸酯无氟防水剂,并将其应用于棉织物整理。考察了软硬单体配比对乳液、乳胶膜及其应用性能的影响。利用傅里叶红外光谱(FT-IR)和傅里叶红外光谱(DLS)对聚丙烯酸酯的结构及乳胶粒的粒径大小进行了表征,利用伺服材料多功能高低温控制试验机、柔软度仪、SEM对整理织物的应用性能及表面形貌进行了表征。结果表明：当m(BA):m(MMA)为6:4时,单体的转化率最大为96.97%,乳液的凝胶率为0.14%,乳胶粒的粒径最小为104.8 nm,乳胶膜对水的接触角最大可达114.3?,并具有优异的耐水性。整理棉织物表现出优异的力学性能和良好的柔软度,其对水的接触角可达161?。SEM结果表明棉织物纤维表面存在功能化POSS纳米颗粒。无氟防水剂赋予棉织物纤维表面低的的表面能和一定的粗糙结构,从而使整理棉织物表现出超疏水性能。     

Preparation and characterization of soap-free fluorine-containing acrylate latex

The soap-free fluorine-containing acrylate latices were prepared by the pre-emulsification and semicontinuous polymerization method, with perfluorooctylethyl methacrylate (PFEA) as fluorinated acrylate monomer and monophosphoric acid allyloxy nonylphenoxy poly(ethyleneoxy)₍₁₀₎ ether as reactive emulsifier. The structure and property of latex polymers were characterized by laser particle size analyzer, attenuated total reflectance spectra of infrared, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis. The effects of polymerization conditions on the conversion and polymerization stability were discussed in detail and the optimal polymerization condition was obtained. XPS analysis indicates that the perfluoroalkyl groups have the tendency to enrich at the film–air interface. With the increasing of PFEA amount, the water absorption of the film decreases and the water contact angle of the film increases. At the same time, the thermal stability of the copolymer is greatly enhanced with the increasing of PFEA amount.     

Preparation and characterization of trilayer core–shell polysilsesquioxane–fluoroacrylate copolymer composite emulsion particles

Polysilsesquioxane–fluoroacrylate copolymer [poly(methyl methacrylate)–butyl acrylate–dodecafluoroheptyl methacrylate)] (FPSQ) composite latex particles with a trilayer core–shell morphology were manufactured by seeded emulsion polymerization, where PSQ latex particles bearing reactive methacryloxypropyl moieties were first produced by the hydrolysis‐condensation of (3‐methacryloxypropyl)trimethoxysilane, and then they were utilized as seeds, with methyl methacrylate, butyl acrylate, and dodecafluoroheptyl methacrylate as the inner and outer shell monomers. Fourier‐transform infrared spectra and ¹H‐NMR confirm the structure of the FPSQs. Transmission electron microscopy and scanning electron microscopy demonstrate that the obtained composite emulsion particles emerge with the trilayer core–shell pattern. Due to the anchoring of PSQ nanoparticles, the thermal stabilities of the FPSQ films are strengthened, and the resistance to heat is gradually improved along with the increase of the fluoroacrylate dose in the polymer matrix composite. X‐ray photoelectron spectroscopy, atomic force microscopy (AFM), and hydrophobicity investigations indicate that the fluorinated chain segments tend to concentrate at the film–air two‐phase interface. In addition, the AFM result denotes that importing more fluorine into the FPSQ hybrid material will engender greater phase separation and enrichment of the fluoroalkyl segments and a rougher morphology. Thus, the water contact angle of the FPSQ film can ultimately reach 121.4°. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44845.     

Polyisoprene modified poly(alkyl acrylate) foam as oil sorbent material

Biorenewable polyisoprene latex obtained from natural rubber, Hevea brasiliensis, was used to prepare the reusable polyisoprene–poly(alkyl acrylate) foam for petroleum‐based liquid absorption. The foam was produced via latex vulcanization and cured by steaming. The effect of various types of poly(alkyl acrylate) such as poly(methyl methacrylate) (PMMA), poly(butyl methacrylate) (PBMA), and poly(butyl acrylate) (PBA) on oil sorption capacity of the foam were studied. Scanning electron microscope (SEM) images showed interconnected open‐cell macrostructure with the foam porosity greater than 75% and good compression set. The oil sorption capacity of the foam was in the range of 2.0–16.6 g g^?1. The addition of poly(alkyl acrylate) enhanced hydrophobicity and oil sorption capacity of the foam. The absorbed oil was easily recovered by squeezing and the foam can be reused up to 30 sorption–desorption cycles and still preserve high quality sorption. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42688.     

Grafting polymerization of 2‐[3‐(2h‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate on vinyltriethoxysilane‐treated cotton for the preparation of ultraviolet‐protective fabrics

Vinyltriethoxysilane was used to modify the surface of cotton to provide polymerizable vinyl groups on the fiber surface. An ultraviolet‐absorbing monomer, 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate, was polymerized on the vinyltriethoxysilane‐treated fabric to prepare ultraviolet‐protective cotton. The effects of the amounts of the solvent, silane coupling agent, and 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate on the surface morphology and ultraviolet‐protection factor of the treated cotton fabric were investigated. With a suitable process, poly{2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate} was successfully coated onto the fabric, and it significantly reduced ultraviolet transmission through the fabric, resulting in a cotton fabric with excellent ultraviolet‐protection properties. The use of a silane coupling agent helped to ensure a polymer coating with good uniformity and good resistance to washing. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and properties of UV‐curable fluorinated polyurethane acrylates

A series of UV‐curable polyurethane acrylates (PUA0, FPUA3, FPUA6, FPUA 9 FPUA12, FPUA15, where the numbers indicate the wt % of perfluoroalkyl acrylate), were prepared from a reactive oligomer [4,4 ?‐dicyclohexymethanediisocyanate(H12MDI)/ poly(tetramethylene glycol)(PTMG)/2‐hydroxyethyl methacrylate (HEMA): 2/1/2 molar ratio, prepolymer:40 wt %] and diluents [methyl methacrylate (MMA, 20 wt %)/ isobornyl acrylate (IBOA, 40–25 wt %)/heptadecafluorodecyl methacrylate (PFA, 0–15 wt), total diluents: 60 wt %]. This study examined the effect of PFA/IBOA weight ratio on the properties of the UV‐curable polyurethane acrylates for antifouling coating materials. The as‐prepared UV‐curable coating material containing a 15 wt % PFA content in diluents (MMA/IBOA/PFA) form a heterogeneous mixture, indicating that a PFA content of approximately 15 wt % was beyond the limit of the dilution capacity of diluents for the oligomer. In the wavelength range of 400–800 nm, the UV‐cured PUA0 film sample was quite transparent (transmittance%: near 100%). On the other hand, the transmittance% of the FPUA film sample decreased markedly with increasing PFA content. XPS showed that the film‐air surface of the UV‐cured polyurethane acrylate film had a higher fluorine content than the film‐glass dish interface. As the PFA content increased from 0 to 12 wt %, the surface tension of the UV‐cured urethane acrylates decreased from 26.8 to 15.6 mN/m, whereas the water/methylene iodide contact angles of the film–air surface increased from 90.1/63.6° to 120.9/87.1°. These results suggest that the UV‐curable polyurethane acrylates containing a PFA content up to 12 wt % have strong potential as fouling‐release coating materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40603.     

Manipulation of chain transfer agent and cross-linker concentration to modify the performance of fluorinated acrylate latex pressure sensitive adhesive

Abstract

n-Dodecyl mercaptan (DDM) chain transfer agent and 1,6-hexanediol diacrylate (HDDA) cross-linker were used to manipulate latex properties in a monomer-starved seeded semi-continuous emulsion polymerization of butyl acrylate (BA), fluorine monomer dodecafluoroheptyl methacrylate (DFMA) together with acrylic acid (AA) and 2-hydroxyethyl acrylate (HEA). The influences of both DDM and HDDA on the particle size of the latex, as well as on the gel content, thermostability (differential scanning calorimeter and thermal gravimetric analysis), surface properties (X-ray photoelectron spectra (XPS), contact angle analysis and atomic force microscopy), and viscoelasticity (N,N-dimethylacrylamide) of the polymer films were investigated. The results showed that the introduction of DDM and HDDA has no significant effects on the final particle size of the fluorinated pressure-sensitive adhesives (PSA) latexes. XPS analysis indicated that the fluoroalkyl groups had the tendency to enrich on the surface of the film. However, this enrichment of fluorine on the film surface was reduced after the introduction of HDDA, while increased with the addition of DDM. It was also found that the gel content, glass transition temperature (T_g), thermal stability, surface roughness, and modulus (G′, G?) of the fluorinated latex PSA were all increased with the introduction of HDDA. Nevertheless, opposite trends were observed for the latex after the addition of DDM. Finally, the effects of DDM and HDDA on the adhesive properties (i.e. loop tack, peel strength and shear strength) of the fluorinated latex PSA were also evaluated.     

核壳型纳米SiO2/含氟聚丙烯酸酯复合乳液的合成与表征

采用原位乳液聚合法,在可聚合阴离子乳化剂/非离子乳化剂复配体系下,以γ-甲基丙烯酰氧丙基三甲氧基硅烷(KH-570)改性的纳米SiO2、甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸(AA)等为核相组成,以MMA、BA及甲基丙烯酸十二氟庚酯(DFMA)为壳相单体,合成纳米SiO2/含氟聚丙烯酸酯复合乳液.考察了纳...