Thermo‐ and pH‐ responsive copolymers: Poly(n‐Isopropylacrylamide‐co‐IAM) copolymers

Poly(N‐isopropylacrylamide) (NIPAAm) is well known as a smart material with good thermal sensitivity and favorable biocompatibility. A series of new smart hydrogels, NIPAAm copolymerized with IAM (itaconamic acid; 4‐amino‐2‐methylene‐4‐oxobutanoic acid), were synthesized through radical solution polymerization in this work. Poly(NIPAAm‐co‐IAM) can respond to the changes of temperature as well as pH value. Such a characteristic is due to the fact that IAM contains not only a hydrophilic acrylic acid moiety but also an acrylamide moiety to be thermal and pH sensitive. The experimental results show that the lower critical solution temperature (LCST) of the copolymer increases as the molar fraction of IAM increases. Moreover, based on the current experimental data, 3 wt % of Poly(NIPAAm‐co‐IAM) aqueous solution in this study exhibits a phase transition temperature (37.8°C) close to the human body temperature in the buffer solution of pH 7 possibly to be useful in drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42367.     

Cyclopolymerization protocol for the synthesis of a poly(zwitterion‐alt‐sulfur dioxide) to investigate the polyzwitterion‐to‐poly(anion‐zwitterion) transition

The zwitterionic monomer, 3‐(N,N‐diallyl,N‐carboethoxymethylammonio)propanesulfonate, on cocyclopolymerization with sulfur dioxide in DMSO using azoisobutyronitrile as the initiator afforded the polyzwitterion (PZ) copolymer in excellent yields. The PZ on acidic hydrolysis of the ester groups led to the corresponding polyzwitterionic acid (PZA). The pH‐responsive PZA on treatment with sodium hydroxide gave the new poly(eletrolyte‐zwitterion) (PEZ). The solubility, viscosity behaviors, and solution properties of the salt‐tolerant PZ, PZA, and PEZ were studied in detail. Like common PZs, PZ was found to be insoluble in salt‐free but soluble in salt‐added water. The apparent basicity constants of the carboxyl group in PEZ have been determined. As the name implies, the PEZ possesses dual type of structural feature common to both conventional anionic polyelectrolytes and PZs, and its aqueous solution behavior is found to be similar to that observed for a typical alternating anionic‐zwitterionic copolymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Independent control of lower critical solution temperature and swelling behavior with pH for poly(N‐isopropylacrylamide‐co‐maleic acid)

Polymer solutions that gel in response to changes in temperature and pH are of interest for various forms of drug delivery, and it is desirable to increase swelling for diffusion‐controlled release without bringing the lower critical solution temperature (LCST) above 37°C. N‐isopropylacrylamide (NIP) was polymerized with maleic acid (MAc), a diprotic acid, and acrylic acid (AAc), a monoprotic acid, to compare swelling and temperature response with changes in pH. For samples with equal acid contents and almost identical LCST responses to pH, poly(N‐isopropylacrylamide‐co‐maleic acid) (pNIP MAc) demonstrated greater swelling than poly(N‐isopropylacrylamide‐co‐acrylic acid) (pNIP AAc). The LCST increase for MAc occurred at a pH corresponding to the deprotonation of almost all of the first acid groups. Further increases in pH led to the deprotonation of the second ? COOH and only served to increase the charge concentration at a given location. These results provide strong support for the theory that LCST results largely from uninterrupted chain lengths of NIP and that swelling results from the actual charge density of acid groups along the chain. Because the use of a diprotic acid copolymer allows swelling to be decoupled from LCST, pNIP MAc may be an appropriate candidate for pH‐sensitive drug‐delivery applications. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2110–2116, 2004     

Influence of potassium humate on the swelling properties of a poly(acrylic acid‐co‐acrylamide)/ potassium humate superabsorbent composite

A novel superabsorbent composite, poly(acrylic acid‐co‐acrylamide)/potassium humate (PAA‐AM/KHA), was prepared by aqueous solution polymerization from acrylic acid, acrylamide, and potassium humate (KHA) with N,N′‐methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator. The effects of incorporated KHA on the water absorbency, swelling rate, and reswelling capability were investigated. The swelling property of PAA‐AM/KHA in various saline solutions was studied systematically. The results show that the comprehensive properties and especially salt‐resistant ability of PAA‐AM/KHA were enhanced. There was a linear relationship between the saturated water absorbency and the minus square root of the ionic strength of the external medium, and the water absorbency of PAA‐AM/KHA in various salt solutions had the following order: NH₄Cl_(aq) = KCl_(aq) = NaCl_(aq) > MgCl_2(aq) > CaCl_2(aq) > AlCl_3(aq) > FeCl_3(aq). Moreover, the polymeric net structure of PAA‐AM/KHA was examined with respect to that of poly(acrylic acid‐co‐acrylamide). The results indicate that the polymeric net of PAA‐AM/KHA was improved by the introduction of a moderate amount of KHA into the superabsorbent composite and made more suitable for agriculture and horticulture applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Preparation of temperature‐ and pH‐sensitive,stimuli‐responsive poly(N‐isopropylacrylamide‐co‐methacrylic acid) nanoparticles

The effects of the monomer ratio, surfactant, and crosslinker contents on the particle size and phase‐transition behavior of the copolymer poly(N‐isopropylacrylamide‐co‐methacrylic acid) (PNIPAAm–MAA) were investigated with Fourier transform infrared, differential scanning calorimetry, and dynamic laser scattering techniques. In addition to the thermoresponsive property of poly(N‐isopropylacrylamide), ionized methacrylic acid groups brought pH sensitivity to the PNIPAAm–MAA copolymer particles. The polymer particle size varied with the amounts of the monomer ratio, surfactant, and crosslinker. As the monomer ratio and crosslinker content increased and the amount of the surfactants decreased, the particle size increased. The influence of the crosslinker content on the particle size was less significant than the effect of the monomer ratio and surfactants. When the temperature increased, the particles tended to shrink and decreased in size to near or below 100 nm. Particle sizes at 20°C decreased to less than 100 nm with increased surfactant content. The control of the particle size within the 100‐nm range makes PNIPAAm–MAA copolymer particles useful for biomedical and heavy‐metal‐ion adsorption applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Small‐angle neutron scattering of poly(styrene)/poly(acrylic acid–ethyl acrylate) copolymers: The effect of the degree of hydrolysis of the poly(acrylic acid–ethyl acrylate) block

We report the results of systems based on polystyrene‐poly(ethyl acrylate) (PEA) diblocks, which self‐assemble in aqueous solutions to form spherical micelles. Previous work has shown that the rheological properties of these solutions, in particular the gel–liquid transition, can be tuned through the use of a simple hydrolysis reaction to convert PEA to poly(acrylic acid) (PAA). We studied the effect of the extent of hydrolysis on the self‐assembly and micellar interactions. Small‐angle neutron scattering (SANS) spectra were fit with a variety of models to determine the micelle structure. As more PEA was converted to PAA (i.e., as the corona became more charged and more hydrophilic), the micellar aggregation number decreased, analogous to observations of other polymeric micelles. This effect could impact the gel–liquid transition and rheology in this system and in similar micellar block copolymer gels. Finally, our SANS spectra qualitatively agreed with predictions for attractive colloidal glasses, confirming the idea that the elasticity of these gels arises from the jamming of micelles. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 490–497, 2004     

Concentration effect on aggregation and dissolution behavior of poly(N‐isopropylacrylamide) in water

The concentration effect on aggregation and dissolution behavior of poly(N‐isopropylacrylamide) (PNIPAM) in water was studied. Three concentration regimes with different phase behavior were identified by differential scanning calorimetry (DSC). Further optical, light‐scattering, and rheological studies indicated that the appearance of different regimes arose from their corresponding solution structures below lower critical solution temperature (LCST): free chains and small clusters in regime I, large clusters in regime II, and a gel‐like network in regime III. Different solution structures below LCST led to different phase‐separated patterns formed above LCST: colloidal particles in regime I, large precipitate in regime II, and the sponge‐like solid in regime III, which was well understood based on the overlapping parameter P. Different phase‐separated patterns therefore resulted in different remixing behavior as observed by DSC. This work suggests that the swelling and collapse behavior of PNIPAM based hydrogels was controlled through the design of their phase‐separated patterns, and therefore provided a way to develop high performance thermo‐sensitive materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41669.     

Covalent immobilization of trypsin onto thermo‐sensitive poly(N‐isopropylacrylamide‐co‐acrylic acid) microspheres with high activity and stability

Poly(N‐isopropylacrylamide‐co‐acrylic acid) (P(NIPAM‐co‐AA)) microspheres with a high copolymerized AA content were fabricated using rapid membrane emulsification technique. The uniform size, good hydrophilicity, and thermo sensitivity of the microspheres were favorable for trypsin immobilization. Trypsin molecules were immobilized onto the microspheres surfaces by covalent attachment. The effects of various parameters such as immobilization pH value, enzyme concentration, concentration of buffer solution, and immobilization time on protein loading amount and enzyme activity were systematically investigated. Under the optimum conditions, the protein loading was 493 ± 20 mg g^?1 and the activity yield of immobilized trypsin was 155% ± 3%. The maximum activity (V_max) and Michaelis constant (K_m) of immobilized enzyme were found to be 0.74 μM s^?1 and 0.54 mM, respectively. The immobilized trypsin showed better thermal and storage stability than the free trypsin. The enzyme‐immobilized microspheres with high protein loading amount still can show a thermo reversible phase transition behavior. The research could provide a strategy to immobilize enzyme for application in proteomics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43343.     

Rapid swelling and deswelling of semi‐interpenetrating network poly(acrylic acid)/poly(aspartic acid) hydrogels prepared by freezing polymerization

Hydrogels with semi‐interpenetrating networks composed of poly(acrylic acid) (PAAc) and poly(aspartic acid) (PASP) have great potential for pharmaceutical and biomedical applications. In this study, we aimed to synthesize semi‐interpenetrating PAAc/PASP hydrogels with improved swelling–deswelling properties via two‐step polymerization, in which the first step of polymerization was performed at 37 °C for 15 min and the second step, the freezing polymerization, was performed at ?20 °C for 24 h. The synthesized hydrogels were characterized with field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The swelling and deswelling behaviors of the hydrogels in response to the ionic strength of the buffer solution were investigated. The Schott's swelling kinetic model was used to elucidate the swelling behavior of the hydrogels. The swelling and deswelling rates of the hydrogels prepared via freezing polymerization were faster than those of the hydrogels prepared via conventional polymerization. This was attributed to the large mean pore size of the freeze‐polymerized hydrogels. The PAAc/PASP hydrogels that underwent freezing polymerization had better swelling–deswelling characteristics than the PAAc hydrogels. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43515.     

Shape‐memory behaviors of biodegradable poly(L‐lactide‐co‐ϵ‐caprolactone) copolymers

A series of biodegradable poly(L ‐lactide‐co‐?‐caprolactone) (PCLA) copolymers with different chemical compositions are synthesized and characterized. The mechanical properties and shape‐memory behaviors of PCLA copolymers are studied. The mechanical properties are significantly affected by the copolymer compositions. With the ?‐caprolactone (?‐CL) content increasing, the tensile strength of copolymers decreases linearly and the elongation at break increases gradually. By means of adjusting the compositions, the copolymers exhibit excellent shape‐memory effects with shape‐recovery and shape‐retention rate exceeding 95%. The effects of composition, deformation strain, and the stretching conditions on the recovery stress are also investigated systematically. A maximum recovery stress around 6.2 MPa can be obtained at stretching at T_g ? 15°C to 200% deformation strain for the PCLA70 copolymer. The degradation results show that the copolymers with higher ?‐CL content have faster degradation rates and shape‐recovery rates, meanwhile, the recovery stress can maintain a relative high value after 30 days in vitro degradation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Measurement of the electrochemical response time and electron paramagnetic resonance behavior of poly(o‐phenetidine)–poly(styrene sulfonic acid) and poly(2‐ethylaniline)–poly(styrene sulfonic acid) complexes

Two studies were mainly focused on the measurement of electrochemical response time and the electron paramagnetic resonance (EPR) of the substituted polyaniline (PANI) complexes poly(o‐phenetidine) (POP)–poly(styrene sulfonic acid) (PSSA) and poly(2‐ethylaniline) (P2E)–PSSA, which were prepared by the electrochemical polymerization of the monomer (o‐phenetidine or 2‐ethylaniline) with PSSA, with indium tin oxide (ITO) as a working electrode in a 1M HCl solution. Ultraviolet–visible spectra measurements showed evidence for the doped substituted PANI system to have a highly electrochemical response time recorded at a temperature of 298 K, and the results were further analyzed on the basis of the color–discolor model, which is typical of protonation systems. At the reaction time (3 s) and monomer concentration (0.6M) with PSSA (0.15 μ), the best electrochemical color/discolor time of the POP–PSSA complexes was 125/125 ms (thickness = 3.00 μm), which was faster than that of the P2E–PSSA complexes. At the same thickness (10 μm), the best electrochemical color/discolor time of the POP–PSSA complexes was 500/250 ms, which was faster than the P2E–PSSA complexes (750/500 ms). With regard to film growth rate, the POP–PSSA complexes (1.0 μm/s) were faster than the P2E–PSSA complexes (0.79 μm/s); this was attributed to the substituted PANI having a steric effect and to good reactivity by the ethoxy group (? OC₂H₅) in the molecules. The EPR spectra of the two samples were recorded both at 298 and 77 K and were further analyzed on the basis of the polaron–bipolaron model. The narrower line width of the substituted PANI complexes arose due to polarons; that is, we propose that charge transport took place through both polarons and bipolarons. Compared to their salts, this could be attributed to the lower degree of structural disorder, the oxygen absorption on the molecules, and the steric effect by the side chain group. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1211–1221, 2005     

Adsorption of ammonium and nitrate ions by poly(N‐isopropylacrylamide) gel and poly(N‐isopropylacrylamide‐co‐chlorophyllin) gel in different states

The adsorption of ammonium and nitrate by temperature‐stimulus‐responsive poly(N‐isopropylacrylamide) (NIPA) gel and poly(N‐isopropylacrylamide‐co‐chlorophyllin) (NIPA‐CH) gel in different states was investigated. Both the NIPA gel and NIPA‐CH gel could adsorb ammonium and nitrate in a swollen state (swollen gel) and a swelling state (swelling gel), and they adsorbed ammonium more than nitrate. When the gels were shrinking (shrinking gel), they could adsorb a little ammonium from solution, but when the gels were in a shrunken state (shrunken gel), they hardly adsorbed ammonium. The adsorption of both ammonium and nitrate increased for the swelling NIPA gel in comparison with the swollen gel. The NIPA‐CH gel was the opposite in this respect. The difference in the amounts of adsorption of ammonium and nitrate by the swollen and swelling NIPA‐CH gels was more significant than that of the NIPA gels. It was suggested that ions such as ammonium and nitrate could not diffuse into the gels freely. The adsorption of ammonium and nitrate was affected not only by the phase transitions of the gels but also by the electrical charges. The experimental results for the adsorption of ammonium and nitrate during the volume changes of the gels imply that if the gels are applied to the immobilization of microorganisms, they may improve mass transfer between the immobilization matrix and bulk liquid under cyclic temperature changes and promote reactions of the immobilized microorganisms, especially the nitrification of nitrifying bacteria immobilized by the NIPA‐CH gel. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2367–2372, 2005     

Thermosensitive self‐assembly micelles from A2BA2‐type poly(N‐isopropyl acrylamide)2‐b‐Poly(lactic acid)‐b‐Poly(N‐isopropyl acrylamide)2 four‐armed star block copolymers and their applications as drug carriers

A novel A₂BA₂‐type thermosensitive four‐armed star block copolymer, poly(N‐isopropyl acrylamide)₂‐b‐poly(lactic acid)‐b‐poly(N‐isopropyl acrylamide)₂, was synthesized by atom transfer radical polymerization and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography. The copolymers can self‐assemble into nanoscale spherical core–shell micelles. Dynamic light scattering, surface tension, and ultraviolet–visible determination revealed that the micelles had hydrodynamic diameters (D_h) below 200 nm, critical micelle concentrations from 50 to 55 mg/L, ζ potentials from ?7 to ?19 mV, and cloud points (CPs) of 34–36°C, depending on the [Monomer]/[Macroinitiator] ratios. The CPs and ζ potential absolute values were slightly decreased in simulated physiological media, whereas D_h increased somewhat. The hydrophobic camptothecin (CPT) was entrapped in polymer micelles to investigate the thermo‐induced drug release. The stability of the CPT‐loaded micelles was evaluated by changes in the CPT contents loaded in the micelles and micellar sizes. The MTT cell viability was used to validate the biocompatibility of the developed copolymer micelle aggregates. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4137–4146, 2013     

Synthesis,characterization, and swelling behavior of new pH‐sensitive hydrogels derived from copolymers of 2‐hydroxyethyl methacrylate and 2‐(diisopropylamino)ethylmethacrylate

The aim of this work was to synthesize and to characterize new pH‐sensitive hydrogels that can be used in the controlled release of drugs, useful for dermal treatments or ophthalmology's therapies. Copolymers containing 2‐hydroxyethyl methacrylate (HEMA) with different amounts of 2‐(diisopropylamino)ethyl methacrylate (DPA) (10 and 30 wt %) and different amounts of crosslinker agent, ethylene glycol dimethacrylate (EGDMA) (1 and 3 wt %) were prepared by bulk photo‐polymerization. The copolymers were fully characterized by using Fourier‐transform infrared (FTIR) spectra, differential scanning calorimetry, thermogravimetric analysis, UV–visible spectroscopy, and measuring water content and dynamic swelling degree. The results show that modifications in the amount of DPA and/or crosslinker in the hydrogel produce variations in the thermal properties. When adding of DPA, we observed an increase in the thermal stability and decomposition temperature, as well as a change in the mechanism of decomposition. Also a decrease in the glass transition temperature was observed with regard to the value for pure pHEMA, by the addition of DPA. The water content of the hydrogels depends on the DPA content and it is inversely proportional to both the pH value and the crosslinking degree. Pure poly‐HEMA films did not show important changes over the pH range studied in this work. The dynamic swelling curves show the overshooting effect associated with the incorporation of DPA, the pH of the solution, and the crosslinking density. On the other hand, no important variations in the optical properties were observed. The synthesized hydrogels are useful as a drug delivery pH‐sensitive matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Hollow,pH‐sensitive calcium–alginate/poly(acrylic acid) hydrogel beads as drug carriers for vancomycin release

In this study, hollow calcium–alginate/poly(acrylic acid) (PAA) hydrogel beads were prepared by UV polymerization for use as drug carriers. The hollow structure of the beads was fortified by the incorporation of PAA. The beads exhibited different swelling ratios when immersed in media at different pH values; this demonstrated that the prepared hydrogel beads were pH sensitive. A small amount (<9%) of vancomycin that had been incorporated into the beads was released in simulated gastric fluid, whereas a large amount (≤67%) was released in a sustained manner in simulated intestinal fluid. The observed drug‐release profiles demonstrated that the prepared hydrogel beads are ideal candidate carriers for vancomycin delivery into the gastrointestinal tract. Furthermore, the biological response of cells to these hydrogel beads indicated that they exhibited good biological safety and may have additional applications in tissue engineering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Improved swelling–deswelling behavior of poly(N‐isopropyl acrylamide) gels with poly(N,N′‐dimethyl aminoethyl methacrylate) grafts

Thermoresponsive and pH‐responsive gels were synthesized from N‐isopropyl acrylamide (NIPA) and N,N′‐dimethyl aminoethyl methacrylate (DMAEMA) monomers. Gelation reactions were carried out with both conventional free‐radical polymerization (CFRP) and controlled free‐radical polymerization [reversible addition fragmentation transfer (RAFT)] techniques. The CFRP gels were prepared by polymerizing mixtures of NIPA and DMAEMA in 1,4‐dioxane in presence of N,N'‐methylene bisacrylamide (BIS) as cross‐linker. The RAFT gels were prepared by a the polymerization of NIPA via a similar process in the presence of different amounts of poly(N,N′‐dimethyl aminoethyl methacrylate) macro chain‐transfer agent and the crosslinker. These gels were characterized by scanning electron microscopy (SEM) and differential scanning calorimetry. SEM analysis revealed a macroporous network structure for the RAFT gels, whereas their volume phase‐transition temperatures (VPTTs) were found to be in the range 32–34°C, close to that of poly(N‐isopropyl acrylamide) gels. However, the CFRP copolymer gels exhibited a higher VPTT; this increased with increasing DMAEMA content. The RAFT gels exhibited higher swelling capabilities than the corresponding CFRP gels and also showed faster shrinking–reswelling behavior in response to changes in temperature. All of the gels showed interesting pH‐responsive behavior as well. The unique structural attributes exhibited by the RAFT gels can potentially open up opportunities for developing new materials for various applications, for example, as adsorbents or carrier of drugs or biomolecules. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42749.     

Thermoresponsive and biocompatible poly(vinyl alcohol)‐graft‐poly(N,N‐diethylacrylamide) copolymer: Microwave‐assisted synthesis,characterization, and swelling behavior

Novel thermoresponsive poly(vinyl alcohol)‐graft‐poly(N,N‐diethylacrylamide) (PVA‐g‐PDEAAm) copolymers were prepared by microwave‐assisted graft copolymerization using a potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine (KPS/TEMED) initiator system. The structures of PVA‐g‐PDEAAm copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry/thermogravimetric analysis, gel permeation chromatography, X‐ray diffraction, and scanning electron microscopy. The effects of various process parameters on grafting were systematically studied: microwave power, KPS, monomer and PVA concentrations, and ultraviolet irradiation. Under optimal conditions, the maximum grafting percent and graft efficiency were 101% and 93%, respectively. Furthermore, a lower critical temperature of copolymers was measured in the range 29–31 °C by ultraviolet spectroscopy. The swelling behavior of graft membranes was carried out at various temperatures, and the results showed that the swelling behavior of membranes was dependent on the temperature. In vitro cell culture studies using L929 fibroblast cells confirmed cell compatibility with the PVA‐g‐PDEAAm copolymer and its membrane, making them an attractive candidate for drug delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45969.     

Synthesis and characterization of quaternized poly(4‐vinylpyridine‐co‐styrene) membranes

Copolymers of 4‐vinylpyridine and styrene [P(4VP–St)s] with varied molar ratios were synthesized by means of radical mass polymerization with 2,2′‐azobisisobutyronitrile as an initiator. The insoluble (linear) pyridinium‐type polymers in the octyl‐pyridinium bromide form, which possess various macromolecular chain compositions, were prepared by the reaction of each P(4VP–St) with 1‐bromooctane. A series of membranes were prepared for use in electrochemistry. These membranes, prepared with quaternized poly(styrene‐co‐4‐vinylpyridine), were characterized by IRspectroscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetory, tensile strength measurements, scanning electron microscopy, and an electrochemistry workstation. Our emphasis was to select a membrane with appropriate properties for use in the electrochemistry field. A promising membrane was selected to use in the field of electrochemistry by these characterizations. This study could be the preparation for a study on the electrochemical properties of pyridinium‐type polymers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2146–2153, 2005     

Reentrant phase transition and fast responsive behaviors of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions

Macroporous temperature‐sensitive poly {N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels were synthesized by free‐radical crosslinking polymerization of the monomer N‐[3‐(dimethylaminopropyl)] methacrylamide and the crosslinker N,N′‐methylenebisacrylamide in aqueous solutions at 22°C. Poly(ethylene glycol) (PEG) with a molecular weight of 1000 g/mol was used as the pore‐forming agent during the polymerization reaction. The concentration of PEG in the polymerization solutions was varied between 0 and 18 wt %, whereas the crosslinker (N,N′‐methylenebisacrylamide) concentration was fixed at 2 wt % (with respect to the monomer). The effects of the PEG concentration on the thermo‐induced phase‐transition behavior and the chemical structure, interior morphology, and swelling/deswelling kinetics were investigated. Normal‐type hydrogels were also prepared under the same conditions without PEG. An interesting feature of the swelling behavior of both the normal‐type and macroporous hydrogels was the reentrant phase transition, in which the hydrogels collapsed once and reswelled as the temperature was continuously increased. Scanning electron micrographs revealed that the interior network structure of the hydrogels prepared in PEG solutions became more porous with an increase in the PEG concentration in the polymerization solution. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved responsive rate to external temperature changes during the deswelling and swelling processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and performance of a transparent poly(3,4‐ethylene dioxythiophene)–poly(p‐styrene sulfonate‐co‐acrylic acid sodium) film with a high stability and water resistance

Poly(p‐styrene sulfonate‐co‐acrylic acid sodium) (PSA) from the copolymerization of acrylic acid sodium and p‐styrene sulfonate monomers were used to dope poly(3,4‐ethylene dioxythiophene) (PEDOT) to generate PEDOT–PSA antistatic dispersions. Compared to those of the PEDOT–poly(p‐styrene sulfonate sodium) (PSS), the physical and electrical properties of the PEDOT–PSA conductive liquids were much better. The PEDOT–PSA films possessed a better water resistance without a decrease in the conductivity. The sheet resistance of the PEDOT–PSA–poly(ethylene terephthalate) (PET) films was about 1.5 × 10⁴ Ω/sq with a 100 nm thickness, the same as the PEDOT–PSS–PET films. The transmittance of the PEDOT–PSA–PET films exceeded 88%. Furthermore, the environmental dispersity of the PEDOT–PSA antistatic dispersion was apparently improved by the dopant PSA so that the stability was extraordinarily promoted. Meanwhile, the water resistances of the PEDOT–PSA–PET and PEDOT–PSA films were also enhanced. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45163.