Preparation and characterization of aqueous dispersions of poly(3,4‐ethylenedithiathiophene‐co‐3,4‐ethylenedioxythiophene)/ poly(styrene sulfonate) and their conducting films

The chemical oxidative copolymerization of 3,4‐ethylenedithiathiophene (EDTT) with 3,4‐ethylenedioxythiophene (EDOT) and 2′‐hydroxymethyl‐3,4‐ethylenedioxythiophene in a poly(styrene sulfonic acid) aqueous solution was successfully carried out to form stable, dark blue colloidal dispersions in water. Coating these dispersions onto polypropylene substrates led to the formation of free‐standing copolymer films. The mechanical, electrical, and thermoelectrical properties of these films were investigated; the films showed superior properties in comparison with those of poly(3,4‐ethylenedithiathiophene) (PEDTT)/poly(styrene sulfonate) (PSS). The copolymer film based on EDTT and EDOT achieved a high electrical conductivity (8.2 × 10^?2 S cm^?1) at 298 K; this could be improved about 10 times through the addition of dimethyl sulfoxide (DMSO) or DMSO/isopropyl alcohol into the polymer dispersion with almost constant Seebeck coefficients of about 9 μV K^?1. On the contrary, these additives had almost no effect on the conductivity of PEDTT/PSS. The structure and morphology of the polymer films were studied by X‐ray diffraction and SEM analyses. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Facile preparation of poly(3,4‐ethylenedioxythiophene) nanoparticles via a miniemulsion polymerization process

Poly(3,4‐ethylenedioxythiophene) (PEDOT) nanoparticles were prepared via a miniemulsion polymerization process. The chemical oxidative polymerization of 3,4‐ethylenedioxythiophene (EDOT) occurred in the presence of β‐1,3‐glucan with the injection of an aqueous oxidant solution, and the nanodroplets of EDOT were transformed to PEDOT nanoparticles dispersed in the aqueous medium. The aqueous emulsion of PEDOT nanoparticles showed relatively long emulsion stability (> 8 weeks), and the recovered solid nanoparticles were also redispersible in deionized water without deposition. The size and size distribution of PEDOT nanoparticles could be controlled by adjusting the operating conditions of the ultrasonifier before the polymerization process. The building‐up of a shearing force decreases the size of the PEDOT nanoparticles and also causes the occurrence of a multimodal size distribution for the PEDOT nanoparticles. The electrical conductivity of the PEDOT nanoparticles was 0.28–1.20 S cm⁻¹. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Feasibility of conducting semi‐interpenetrating networks based on a poly(ethylene oxide) network and poly(3,4‐ethylenedioxythiophene) in actuator design

A new type of synthetic pathway—the use of interpenetrating polymer networks (IPNs)—is proposed to design conducting polymer‐based actuators. Two types of materials with interesting conducting properties were prepared: (1) a semi‐IPN between poly(3,4‐ethylenedioxythiophene) (PEDOT) and branched poly(ethylene oxide) (PEO) network; (2) a tricomponent IPN between PEDOT and a PEO/polycarbonate (PC)–based network as the ionic conducting partner. In the first case, the influence of the amount of branching in the PEO network on the EDOT uptake and electrochemical properties was studied. A maximum conductivity (15 S cm^?1) was obtained for 60 wt % branched PEO in the material. Moreover, the dispersion profile of PEDOT in the material was shown by elemental analysis and energy dispersion spectroscopy to follow a gradient through the thickness of the film leading to a built‐in three‐layered device. With respect to PEO/PC materials, the best results were obtained for about 80 wt % PEO in the matrix where the material remains sufficiently elastomeric. In this case, the conductivity reaches about 1 S cm^?1 for a 10 to 30 wt % polycarbonate content. These materials are capable of reversible 45° angular deflections under a 0.5V potential difference. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3569–3577, 2003     

Phthalonitrile end-capped sulfonated polyarylene ether nitriles for low-swelling proton exchange membranes

A series of phthalonitrile end-capped sulfonated polyarylene ether nitriles are synthesized via K₂CO₃ mediated nucleophilic aromatic substitution reaction at various molar ratios. The as-prepared polymer structures are confirmed by ¹H NMR and FTIR spectroscopy. The properties of membranes cast from the corresponding polymers are investigated with respect to their structures. The membranes exhibit good thermal and mechanical properties, low methanol permeability (0.01?×?10^?6–0.58?×?10^?6 cm²·s^?1 at 20 °C), and high proton conductivity (0.021–0.088 S·cm^?1 at 20 °C). The introduction of phthalonitrile is proved to increase intermolecular interaction, mainly contributing to the reduction in water uptake, swelling ratio, and methanol permeability. More importantly, its introduction does not decrease the proton conductivity, but there is a slight increase. Furthermore, the selectivity of SPEN-CN-50 can reach 4.11?×?10⁵ S·s·cm^?3, which is about nine times higher than that of Nafion 117. All the data show that the as-prepared membranes may be potential proton exchange membrane for DMFCs applications.     

Effects of alcoholic solvents on the conductivity of tosylate‐doped poly(3,4‐ethylenedioxythiophene) (PEDOT‐OTs)

The effects of alcoholic solvents on the charge transport properties of tosylate‐doped poly(3,4‐ethylenedioxythiophene) (PEDOT‐OTs) are investigated. The use of different alcoholic solvents in the oxidative chemical polymerization of 3,4‐ethylenedioxythiophene (EDOT) with iron(III)‐p‐tosylate led to a change in the electrical conductivity of PEDOT‐OTs. For example, PEDOT‐OTs prepared from methanol shows a conductivity of 20.1 S cm^?1 which is enhanced by a factor of 200 as compared to PEDOT‐OTs prepared from hexanol. The variation of charge transport properties on the use of different alcoholic solvents is consistent with the data recorded by UV‐visible and electrospin resonance (ESR) measurements. From XPS experiments, the PEDOT‐OTs samples prepared from different alcoholic solvents were found to have almost the same doping level, suggesting that the number of charge carriers is not responsible for the change in conductivity. Supported by XRD results, it was found that the use of alcoholic solvents with shorter chain length induces more efficient packing of PEDOT chains. It is proposed that the alcoholic solvents associated with the counter ion of PEDOT via hydrogen bonding give rise to a change in the molecular ordering of PEDOT chains during the polymerization step, hence enhancing or depressing the inter‐chain hopping rate of the resulting PEDOT‐OTs. Copyright © 2005 Society of Chemical Industry     

Preparation and characterization of graphene composites with conducting polymers

We report a new route for preparing electro‐conductive composites based on reduced graphene oxide (RG‐O) and poly(3,4‐ethylenedioxythiophene) (PEDOT). The composites were prepared by in situ polymerization of EDOT in aqueous mixture containing RG‐O platelets modified with poly(sodium 4‐styrenesulfonate) (PSS). In the synthetic process, PSS molecules stabilize RG‐O in the aqueous phase and function as a polymerization template to hybridize PEDOT chains along RG‐O platelets. Compared with the RG‐O platelets, the resulting composites show an enhanced electrical conductivity of 9.2 S cm^?1 with good thermal stability. Copyright © 2011 Society of Chemical Industry     

Synthesis of functionalizable derivatives of 3,4‐ethylenedioxythiophene and their solid‐state polymerizations

Four polythiophenes based on poly(3,4‐ethylenedioxythiophene) (PEDOT) framework have been successfully prepared by the facile thermal activated solid‐state polymerization (SSP) process from their corresponding dibromothiophene derivatives, which were efficiently obtained using our improved methodology. Rates of polymerizations of these precursors were varied and most of the processes were incomplete under the reaction condition chosen for the synthesis. Raising the reaction temperature of the SSP further advanced the polymerization progress and improved the conductive properties of the polymer. The polymer of 3,4‐ethylenedioxythiophene‐methanol (EDTM) and its two related derivatives with functionalizable groups were prepared for the first time by the SSP method. The process and these new SSP‐derived polymers could help solving the fabrication difficulty and expand the scope of their applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42233.     

Study of hyperbranched poly(glycidol) sulfate electrolyte

Hyperbranched poly(glycidol) alkali sulfate (SHPG‐M) was prepared based on hyperbranched poly(glycidol). Polyurethane–hyperbranched poly(glycidol) (PU–SHPG‐M) sulfate electrolyte is a kind of single ionic or cationic conducting polymer electrolyte. Such a single ionic polymer electrolyte can obviously reduce the polarization and has little decay of direct current (DC) conductivity. SHPG‐M was characterized by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), atomic force microscopy (AFM) and impedance analysis. The optimum conductivity is ～3 × 10^?6 S·cm^?1, with 30–40% SHPG‐M in the polymer electrolyte at room temperature. The species of cation greatly effects the ionic conductivity of the polymer electrolyte; that is, σ_SHPG‐Li > σ_SHPG‐Na > σ_SHPG‐K, with same SHPG‐M content in the polymer electrolyte. The ionic conductivity increases with an increase of temperature, and the dependence of ionic conductivity on temperature fits the Arrhenius equation well. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1185–1190, 2003     

Application of electrochemically produced and oxidized poly(3,4‐ethylenedioxythiophene) as anticorrosive additive for paints: Influence of the doping level

This work investigates the resistance against marine corrosion of an epoxy‐based coating modified by the addition of electrochemically produced and oxidized poly(3,4‐ethylenedioxythiophene) (PEDOT). For this purpose, electrodeposition of PEDOT was performed on steel electrodes by electrochemical polymerization of 3,4‐ethylenedioxythiophene. The doping level of the resulting material was increased by chronoamperometry and chronopotentiometry (CP), three different oxidation degrees being achieved. The electrochemical and electrical properties of such three samples, which were used as anticorrosive additives, were examined. Furthermore, the physical properties of the coating before and after addition of the conducting polymers were characterized using FTIR, thermal analyses, and mechanical properties evaluations. Accelerated corrosion tests indicated that the polymer with the highest amount of positive charge per monomeric unit, which was achieved by CP, enhances considerably the anticorrosive protection imparted by the coating. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1592–1599, 2006     

Synthesis and characterization of polymers derived from selenophene

The synthesis of poly(2,5‐selenophen‐oxo‐1,4‐phenylen‐selenide‐1,4‐phenylene‐oxo) (I) and poly(2,5‐selenophen‐oxo‐1,4‐phenylen‐diselenide‐1,4‐phenylen‐oxo) (II) by reaction of 2,5‐bis(1,4‐bromo‐phenylen‐oxo‐)‐selenophene with sodium selenide or diselenide, respectively, using dimethylformamide as solvent, is described. Both monomers and polymers were characterized by elemental analysis, melting point, and FTIR spectroscopy. Polymers I and II were doped with iodine and SbF₅ and characterized by SEM and XPS. Also, the conductivity and the T_g values were determined. For both polymers the best doping agent was iodine, although polymer II always presented higher conductivity, reaching values of about 6 · 10^?9 S · cm^?1. The T_g values suggest a likely crosslinking of the chains in polymer II when doped with SbF₅. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2019–2026, 2001     

Synthesis and characterization of conducting copolymer of Trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene with EDOT

Ferrocene‐substituted conducting polymer namely poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene‐co‐3,4‐ethylenedioxythiophene) [P(MTFE‐co‐EDOT)] was synthesized and its electrochromic properties were studied. Monomer, MTFE, was obtained using 2‐(ferrocenyl)ethene and 3‐methyl‐4‐bromothiophene. The structure of monomer was determined via Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, and ¹³C‐NMR techniques. The copolymer was synthesized using this monomer and EDOT. The resulting copolymer P(MTFE‐co‐EDOT) was characterized by cyclic voltammetry, FTIR, scanning electron microscopy, atomic force microscopy, and UV–vis spectroscopy. The conductivity measurements of copolymer and PEDOT were accomplished by the four‐probe technique. Although poly(trans‐1‐(4‐methyl‐3′‐thienyl)‐2‐(ferrocenyl)ethene) [P(MTFE)] reveals no electrochromic activity, its copolymer with EDOT has two different colors (violet and gray). Band gap (E_g) and λ_max of P(MTFE‐co‐EDOT) were determined. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Multicolor electrochromism of low‐bandgap copolymers based on pyrrole and 3,4‐ethylenedioxythiophene: Fine‐tuning colors through feed ratio

The copolymerization of pyrrole with 3,4‐ethylenedioxythiophene (EDOT) is successfully achieved in boron trifluoride diethyl etherate via direct anodic oxidation of the monomer mixtures on indium‐tin oxide working electrodes. The resultant copolymers are characterized by electrochemical methods, FT‐IR, XPS, SEM, and spectroelectrochemical analysis. The copolymer films present excellent electrochromic properties especially the multicolor electrochromism which can be tuned through the feed ratio of pyrrole and EDOT. The neutral copolymer films exhibit blue‐shift with the increasing feed ratio of pyrrole and EDOT, and the calculated band gaps of the copolymers are as low as that of PEDOT film. Furthermore, the electrochemical and optical stability has been improved by the incorporation of EDOT units into the polymer chains. The copolymer prepared with the changing feed ratio of pyrrole and EDOT at 1/4 retains 71% of its original electroactivity after 500 cycles and 72% of its optical contrast after 500 steps. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Enhanced Thermoelectric Performance of PEDOT:PSS Films by Sequential Post‐Treatment with Formamide

This paper reports a series of sequential post‐treatments using a polar solvent formamide to enhance the thermoelectric performance of poly(3,4‐ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT:PSS). The electrical conductivity of PEDOT:PSS films significantly increases from 0.33 S cm^?1 for the pristine film to ≈2929 S cm^?1 for the treated film and meanwhile the Seebeck coefficient maintains as high as 17.4 µV K^?1, resulting in a power factor of 88.7 µW m^?1 K^?2. Formamide is a polar solvent with a high boiling point of 210 °C and high dielectric constant of 109, and PSS has a good solubility in it. Post‐treatment with formamide causes not only the phase segregation of PEDOT and PSS but also the removal of insulating PSS, therefore leading to the reorientation of PEDOT chains and enhancement in mobility without altering the doping level considerably. The cross‐plane thermal conductivity also reduces from 0.54 to 0.19 W m^?1 K^?1 after the post‐treatment, leading to a figure of merit (ZT) value of 0.04 at room temperature.     

Mechanically enhanced electrically conductive films from polymerization of 3,4‐ethylenedioxythiophene with wood microfibers

This study was aimed at enhancing the mechanical properties of poly(3,4‐ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT:PSS) using wood microfibers. Ultra fine friction grinding was conducted on wood particles to reduce their size to the micron scale and to induce fibrillation. Oxidative polymerization was performed on 3,4‐ethylenedioxythiophene (EDOT) monomer at seven dosages based on the content of microfibers in the formulation. The presence of PEDOT:PSS in the prepared films was verified by infrared spectroscopy and scanning electron microscopy. The composite films became stronger and stiffer as the fiber content increased. An EDOT:microfibers ratio of 33 wt % was considered the best among the seven tested levels, judging from their low sheet resistivity (340 Ω/sq.) and favorable tensile properties (38 MPa strength and 4.8 GPa stiffness). The selected films were also tested for their resistance to solvents to obtain information about their potential use in different environments. Among the tested solvents, sodium hydroxide greatly decreased the film conductivity. It also had the harshest effect on reducing the weight of the film. Findings from this study demonstrate the successful use of wood microfibers alternative to synthetic substrates and cellulose nanofiber as a supportive and reinforcing material for electrically conductive polymers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45127.     

Antifouling ultrafiltration membrane fabricated from poly (arylene ether ketone) bearing hydrophilic hydroxyl groups

A new kind of membrane formation polymer, cardo poly(arylene ether ketone) bearing hydrophilic hydroxyl groups (PEK‐OH) was synthesized from the biphenol monomer 2‐(2‐hydroxyethyl)‐3, 3‐bis (4‐hydroxyphenyl)‐isoindolin‐1‐one (PPH‐OH), and 4, 4′‐difluorodiphenylketone. PEK‐OH asymmetric ultrafiltration membranes were prepared using the immersion coagulation phase inversion method. The PEK‐OH membrane prepared using the optimized conditions exhibited a pure water flux of 516 ± 18 L·m^?2·h^?1 and a 99.1 ± 1.4% rejection of bovine serum albumin (BSA) at an operating pressure of 0.1 MPa. The contact angle of PEK‐OH membrane was 66.0 ± 2.4 lower than these of the PEK‐C membrane (87.0 ± 2.8°, prepared from polymer PEK‐C under the same membrane formation condition as PEK‐OH membrane) and the UE50 membrane (84.0 ± 1.6°, a commercial PES ultrafiltration membrane). The amount of BSA protein adsorbed to the PEK‐OH membrane under static condition was measured to be 3.12 μg·cm^?2, which was greatly lower than that of 88.71 μg·cm^?2 and 74.40 μg·cm^?2 for the PEK‐C and the UE50 ultrafiltration membranes, respectively. Under dynamic filtration of BSA experiments, the PEK‐OH ultrafiltration membrane showed a 78.3% water flux recovery ratio, while only a 39.7% for the PEK‐C membrane and 46.5% for UE50 membrane were detected in the first cycle. After three cycles of BSA and LYZ filtration, the flux recovery ratio of PEK‐OH ultrafiltration membrane changed to be stable at 75% and 73%, while that of PEK‐C and UE50 ultrafiltration membranes remained declining gradually. Thus, hydrophilic PEK‐OH improves antifouling membrane property. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42809.     

Synthesis,characterization, and comparison of self‐doped,doped, and undoped forms of polyaniline,poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)]

Polyaniline (PANI), poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)] were synthesized by chemical oxidative polymerization with ammonium persulfate as an oxidizing reagent in an HCl medium. The viscosities, electrical conductivity, and crystallinity of the resulting polymers (self‐doped forms) were compared with those of the doped and undoped forms. The self‐doped, doped, and undoped forms of these polymers were characterized with infrared spectroscopy, ultraviolet–visible spectroscopy, and a four‐point‐probe conductivity method. X‐ray diffraction characterization revealed the crystalline nature of the polymers. The observed decrease in the conductivity of the copolymer and poly(o‐anisidine) with respect to PANI was attributed to the incorporation of the methoxy moieties into the PANI chain. The homopolymers attained conductivity in the range of 3.97 × 10^?3 to 7.8 S/cm after doping with HCl. The conductivity of the undoped forms of the poly[aniline‐co‐(o‐anisidine)] and poly(o‐anisidine) was observed to be lower than 10^?5 J/S cm^?1. The conductivity of the studied polymer forms decreased by the doping process in the following order: self‐doped → doped → undoped. The conductivity of the studied polymers decreased by the monomer species in the following order: PANI → poly[aniline‐co‐(o‐anisidine)] → poly(o‐anisidine). All the polymer samples were largely amorphous, but with the attachment of the pendant groups of anisidine to the polymer system, the crystallinity region increased. The undoped form of poly[aniline‐co‐(o‐anisidine)] had good solubility in common organic solvents, whereas doped poly[aniline‐co‐(o‐anisidine)] was moderately crystalline and exhibited higher conductivity than the anisidine homopolymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Blue‐light‐emitting poly(arylene ethynylenes) containing alternating sequences of biphenylene or fluorenediyl and p‐phenylene moieties linked through triple bonds

Two new poly(arylene ethynylenes) were synthesized by the reaction of 1,4‐diethynyl‐2.5‐dioctylbenzene either with 4,4′‐diiodo‐3,3′‐dimethyl‐1,1′‐biphenyl or 2,7‐diiodo‐9,9‐dioctylfluorene via the Sonogashira reaction, and their photoluminescence (PL) and electroluminescence (EL) properties were studied. The new poly(arylene ethynylenes) were poly[(3,3′‐dimethyl‐1,1′‐biphenyl‐4,4′‐diyl)‐1,2‐ethynediyl‐(2,5‐dioctyl‐1,4‐phenylene)‐1,2‐ethynediyl] (PPEBE) and poly[(9,9‐dioctylfluorene‐2,7‐diyl)‐1,2‐ethynediyl‐(2,5‐dioctyl‐1,4‐phenylene)‐1,2‐ethynediyl] (PPEFE), both of which were blue‐light emitters. PPEBE not only emitted better blue light than PPEFE, but it also performed better in EL than the latter when the light‐emitting diode devices were constructed with the configuration indium–tin oxide/poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid) (50 nm)/polymer (80 nm)/Ca:Al. The device constructed with PPEBE exhibited an external quantum efficiency of 0.29 cd/A and a maximum brightness of about 560 cd/m², with its EL spectrum showing emitting light maxima at λ = 445 and 472 nm. The device with PPEFE exhibited an efficiency of 0.10 cd/A and a maximum brightness of about 270 cd/m², with its EL spectrum showing an emitting light maximum at λ = 473 nm. Hole mobility (μ_h) and electron mobility (μ_e) of the polymers were determined by the time‐of‐flight method. Both polymers showed faster μ_h values. PPEBE revealed a μ_h of 2.0 × 10^?4 cm²/V·s at an electric field of 1.9 × 10⁵ V/cm and a μ_e of 7.0 × 10^?5 cm²/V·s at an electric field of 1.9 × 10⁵ V/cm. In contrast, the mobilities of the both carriers were slower for PPEFE, and its μ_h (8.0 × 10^?6 cm²/V·s at an electric field of 1.7 × 10⁶ V/cm) was 120 times its μ_e (6.5 × 10^?8 cm²/V·s at an electric field of 8.6 × 10⁵ V/cm). The much better balance in the carriers' mobilities appeared to be the major reason for the better device performance of PPEBE than PPEFE. Their highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels were also a little different from each other. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 299–306, 2006     

Conductive polymers/polyacrylonitrile composite fibers: Fabrication and properties

Polypyrrole/polyacrylonitrile, polyaniline/polyacrylonitrile, and poly(3,4‐ethylenedioxythiophene)/polyacrylonitrile composite fibres were fabricated successfully by in situ polymerization. The morphologic observations confirmed the uniformly‐covered polyacrylonitrile fiber surface by conductive conjugated polymers. These composite fibers exhibited conductivity in the range of 1.4 × 10⁻² to 5.2 × 10⁻¹ S cm⁻¹. Improved thermal stability of the composite fibers was observed from thermogravimetric analysis results. Structural analysis indicated that the interactions of both hydrogen‐bonding and the electrostatic attraction existed between polyacrylonitrile chains and conjugated polymers. These novel composite fibers still possessed original fibrillar morphology and strength properties and showed a good stability to atmosphere and washing. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Enhanced thermoelectric performance of poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS) with long‐term humidity stability via sequential treatment with trifluoroacetic acid

This paper reports a range of effective sequential chemical processes to enhance the thermoelectric performance of conducting poly(3,4‐ethylenedioxythiophene) films doped with poly(styrene sulfonate) anions (PEDOT:PSS). The electrical conductivity of the PEDOT:PSS films was significantly increased from 0.33 to 3748 S cm^?1 after a series of sequential treatments with trifluoroacetic acid (TFA) while the Seebeck coefficient and thermal conductivity were slightly reduced from 17.5 ± 1.2 to 16.0 ± 1.1 μV K^?1 and 0.537 to 0.415 W m^–1 K^?1 for the pristine film and treated film, respectively, leading to a significant improvement in power factor up to 97.1 ± 5.4 μW m^–1 K^?2. More importantly, around 80% of the electrical conductivity and Seebeck coefficient was retained after 20 days for these TFA‐treated PEDOT:PSS films, revealing the potential for real thermoelectric applications. © 2019 Society of Chemical Industry     

Conducting ferromagnetic copolymer of aniline and 3,4‐ethylenedioxythiophene containing nanocrystalline barium ferrite particles

This article reports the synthesis of conducting ferromagnetic complex of 3,4‐ethylenedioxythiophene (EDOT) and aniline (An) containing M‐type hexagonal barium ferrite (BaFe₁₂O₁₉) particles using in situ emulsion polymerization and electrochemical oxidative polymerization. Magnetic and conductivity studies reveal that the conducting ferromagnetic complex possesses high‐saturation magnetization (M_s) value of 29.2 emu/g and conductivity of the order of 0.256 S/cm determined through vibrating sample magnetometer and four‐probe method. Microwave measurement has shown the reflection loss (R_L) of ?12.1 dB in Ku‐band that can be used as a microwave absorbing material. The polymer complex was further characterized by techniques like X‐ray diffraction, Fourier transform infrared, UV–visible, cyclic voltammetry, and thermal analysis with thermogravimetric analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008