Immunosensors for rapid detection of Escherichia coli O157:H7 - perspectives for use in the meat processing industry

This review critically evaluates different types of immunosensors proposed for rapid identification of Escherichia coli O157:H7. The methods are compared with approved USDA-FSIS standard procedures for determination of this pathogen in raw or ready-to-eat meat products. Major advantages and disadvantages for each method are highlighted. Our analysis suggests that application of immunosensors in the meat-processing industry may be limited to identification of uncontaminated samples after conventional selective enrichment in broth. Use for detection appears limited at the present time.     

Multiplex fiber optic biosensor for detection of Listeria monocytogenes, Escherichia coli O157:H7 and Salmonella enterica from ready-to-eat meat samples

Listeria monocytogenes, Escherichia coli O157:H7 and Salmonella enterica are the most common foodborne bacterial pathogens and are responsible for many outbreaks. Therefore, multiplex detection of these three using a single assay platform is highly desirable. The objective was to develop and optimize a fiber optic sensor for simultaneous detection of these three from food. The streptavidin coated optical waveguides were immobilized with biotinylated polyclonal antibodies and exposed to the bacterial suspensions or enriched food samples for 2 h. Pathogens were detected after reacting with Alexa-Fluor 647-labeled monoclonal antibodies. Ready-to-eat beef, chicken and turkey meats were inoculated with each pathogen (∼100 cfu/25 g), enriched in SEL (Salmonella, E. coli, Listeria), a multipathogen selective enrichment broth for 18 h and tested with the biosensor. The biosensor was able to detect each pathogen, individually or in a mixture with very little cross-reactivity. The limit of detection for the sensor was ∼10³ cfu/ml for all three pathogens. Furthermore, the biosensor successfully detected each pathogen, grown in a mixture from enriched meat samples under 24 h. The pathogen presence was further verified by PCR and immunofluorescence assay. The multiplex fiber optic sensor shows promise for detection of the three pathogens if present in the same sample eliminating the use of multiple single pathogen detection platforms.     

生物传感器检测食源性大肠杆菌O157:H7研究新进展

近年来, 生物传感器因具有快速、简便、灵敏度高、低成本等优势被广泛应用到临床检测、环境监测等领域。该技术在食品安全领域也逐步得到重视, 尤其在病原微生物的快速检测方面。本文从免疫识别和核酸识别两方面简要介绍生物传感器技术检测食源性大肠杆菌O157:H7研究的最新进展, 对生物传感器技术存在的问题及未来的研究方向进行了总结及展望。     

Salmonella, Escherichia coli O157:H7 and E. coli biotype 1 in a pilot survey of imported and New Zealand pig meats

A pilot survey for the pathogens Salmonella and Escherichia coli O157:H7, and E. coli biotype 1 was conducted on 100 New Zealand-produced (domestic) pig carcasses and 110 imported pig meat samples over an 8-month period to assess the likelihood of introduction of novel pathogen strains into New Zealand (NZ), and as a guide for development of a domestic pork National Microbiological Database programme. Salmonella was not isolated from domestic pig carcasses or from pig meat imported from Canada and the USA. The prevalence of Salmonella in imported pig meat was 3.6% (95% CI 1.0–9.0) with positive samples detected from Australian pig meat. The prevalence of E. coli O157:H7 on domestic pig carcasses was 1% (95% CI 0.03–5.4) while the overall prevalence of E. coli O157:H7 in imported pig meat was 1.8% (95% CI 0.2–6.4), detected mainly from Australian but not from Canadian or US pork. All except three samples have an E. coli biotype 1 count of <100 CFU cm⁻² or g⁻¹, indicating good hygiene quality of domestic and imported pig meat. The results demonstrated that importation of uncooked pig meat is a potential route for the introduction of new clones of Salmonella and E. coli O157:H7 into New Zealand.     

Photobleaching with phloxine B sensitizer to reduce food matrix interference for detection of Escherichia coli serotype O157:H7 in fresh spinach by flow cytometry

A flow cytometric method (RAPID-B™) with detection sensitivity of one viable cell of Escherichia coli serotype O157:H7 in fresh spinach (Spinacia oleracea) was developed and evaluated. The major impediment to achieving this performance was mistaking autofluorescing spinach particles for tagged target cells. Following a 5 h non-selective enrichment, artificially inoculated samples were photobleached, using phloxine B as a photosensitizer. Samples were centrifuged at high speed to concentrate target cells, then gradient centrifuged to separate them from matrix debris. In external laboratory experiments, RAPID-B and the reference method both correctly detected E. coli O157:H7 at inoculations of ca. 15 cells. In a follow-up study, after 4 cell inoculations of positives and 6 h enrichment, RAPID-B correctly identified 92% of 25 samples. The RAPID-B method limit of detection (LOD) was one cell in 25 g. It proved superior to the reference method (which incorporated real time-PCR, selective enrichment, and culture plating elements) in accuracy and speed.     

The physiologic state of Escherichia coli O157:H7 does not affect its detection in two commercial real-time PCR-based tests

Multiplex real-time PCR detection of Escherichia coli O157:H7 is an efficient molecular tool with high sensitivity and specificity for meat safety assurance. The Biocontrol GDS^® and DuPont Qualicon BAX^®-RT rapid detection systems are two commercial tests based on real-time PCR amplification with potential applications for quantification of specific E. coli O157:H7 gene targets in enriched meat samples. However, there are arguments surrounding the use of these tests to predict pre-enrichment concentrations of E. coli O157:H7, as well as arguments pertaining to the influence of non-viable cells causing false positive results. The present study attempts to illustrate the effects of different bacterial physiologic states and the presence of non-viable cells on the ability of these systems to accurately measure contamination levels of E. coli O157:H7 in ground beef. While the PCR threshold cycle (C_T) values of these assays showed a direct correlation with the number of bacteria present in pure cultures, this was not the case for ground beef samples spiked with various levels of injured or healthy cells. Furthermore, comparison of post-enrichment cell densities of bacteria did not correlate with injured or healthy cell numbers inoculated before enrichment process. Ground beef samples spiked with injured or healthy cells at different doses could not be distinguished by C_T values from either assay. In addition, the contribution of nonviable cells in generating positive real-time PCR signals was investigated using both assays on pre-enriched and post-enriched beef samples, but only if inoculated at levels of 10⁶ cells/sample or higher, which are levels not typically seen in ground beef.     

Mathematical modeling the cross-contamination of Escherichia coli O157:H7 on the surface of ready-to-eat meat product while slicing

Microbial cross-contamination either at home or production site is one of the major factors of causing contamination of foods and leading to the foodborne illness. The knowledge regarding Escherichia coli O157:H7 surface transfer on ready-to-eat (RTE) deli meat and the slicer used for slicing different RTE products are needed to ensure RTE food safety. The objectives of this study were to investigate and to model the surface cross-contamination of E. coli O157:H7 during slicing operation. A five-strain cocktail of E. coli O157:H7 was inoculated directly onto a slicer's round blade rim area at an initial level of ca. 4, 5, 6, 7 or 8 log CFU/blade (ca. 3, 4, 5, 6 or 7 log CFU/cm² of the blade edge area), and then the RTE deli meat (ham) was sliced to a thickness of 1–2 mm. For another cross-contamination scenario, a clean blade was initially used to slice ham which was pre-surface-inoculated with E. coli O157:H7 (ca. 4, 5, 6, 7 or 8 log CFU/100 cm² area), then, followed by slicing un-inoculated ham. Results showed that the developed empirical models were reasonably accurate in describing the transfer trend/pattern of E. coli O157:H7 between the blade and ham slices when the total inoculum level was ≥5 log CFU on the ham or blade. With an initial inoculum level at ≤4 log CFU, the experimental data showed a rather random microbial surface transfer pattern. The models, i.e., a power equation for direct-blade-surface-inoculation, and an exponential equation for ham-surface-inoculation are microbial load and sequential slice index dependent. The surface cross-contamination prediction of E. coli O157:H7 for sliced deli meat (ham) using the developed models were demonstrated. The empirical models may provide a useful tool in developing the RTE meat risk assessment.     

Enhancing the thermal destruction of Escherichia coli O157:H7 in ground beef patties by trans-cinnamaldehyde

The effect of trans-cinnamaldehyde (TC) on the inactivation of Escherichia coli O157:H7 in undercooked ground beef patties was investigated. A five-strain mixture of E. coli O157:H7 was inoculated into ground beef (7.0 log CFU/g), followed by addition of TC (0, 0.15, and 0.3%). The meat was formed into patties and stored at 4 °C for 5 days or at −18 °C for 7 days. The patties were cooked to an internal temperature of 60 or 65 °C, and E. coli O157:H7 was enumerated. The numbers of E. coli O157:H7 did not decline during storage of patties. However, cooking of patties containing TC significantly reduced (P < 0.05) E. coli O157:H7 counts, by >5.0 log CFU/g, relative to the reduction in controls cooked to the same temperatures. The D-values at 60 and 65 °C of E. coli O157:H7 in TC-treated patties (1.85 and 0.08 min, respectively) were significantly lower (P < 0.05) than the corresponding D-values for the organism in control patties (2.70 and 0.29 min, respectively). TC-treated patties were more color stable and showed significantly lower lipid oxidation (P < 0.05) than control samples. TC enhanced the heat sensitivity of E. coli O157:H7 and could potentially be used as an antimicrobial for ensuring pathogen inactivation in undercooked patties. However detailed sensory studies will be necessary to determine the acceptability to consumers of TC in ground beef patties.     

Pulsed UV light as an intervention strategy against Listeria monocytogenes and Escherichia coli O157:H7 on the surface of a meat slicing knife

The main objective of this work was to explore the applicability of the Intense Light Pulses (ILP) for decontamination of a stainless steel meat contact surface, exemplified by a slicing knife, as a function of time between contamination and decontamination, number of light pulses applied, and the prior contact with different meat matrices. Listeria monocytogenes and Escherichia coli O157:H7 were chosen as the challenge microorganisms. The ILP system was a laboratory-scale four-lamp batch system generating 3 J/cm² with an input voltage of 3000 V. The results obtained demonstrate successful application of ILP treatment for reduction of L. monocytogenes and E. coli O157:H7 on a surface of stainless steel slicing knife. The inactivation effectiveness depended on the type of meat product that was in the contact with the treated surface and on the time between the contamination and the ILP treatment. Statistical analysis showed the significant interaction between the time and type of meat product on the effectiveness of ILP treatment. The highest effectiveness of the ILP (the complete inactivation of 6.5 log CFU/side of knife) was obtained when the knife surface was in contact with the products containing lower fat and protein content and when it was treated with pulsed light as fast as possible after the contamination (within 60 s). The decontamination efficacy of ILP treatment could not be improved by multiple light pulses if lost due to the extended time between the moment of contamination and ILP treatment. Results showed that the suggested approach can be very effective as an intervention strategy along meat processing lines preventing cross-contamination between the equipment and the final product.     

Survival of Escherichia coli O157:H7 in channel catfish pond and holding tank water

Survival of Escherichia coli O157:H7 in channel catfish (Ictalurus punctatus), pond and holding tank water was investigated. Water from three channel catfish ponds was inoculated with ampicillin/nalidixic acid-resistant E. coli O157:H7 transformed with a plasmid encoding for green fluorescent protein at 10⁵, 10⁶, and 10⁷ CFU/ml. Samples were taken from surface, internal organs, and skin scrape of fish and pond water for E. coli O157:H7 enumeration on brain heart infusion (BHI) agar containing ampicillin and nalidixic acid. To determine the survival of E. coli O157:H7 in catfish holding tank water from two farmers markets, the water was inoculated with 10⁷E. coli O157:H7 CFU/ml. E. coli O157:H7 were detected by direct plating for 33 and 69 d in pond and holding tank water, respectively. A rapid decrease of the pathogen was observed in the first 2 weeks to reach 2 log CFU/ml. When E. coli O157:H7 was not recovered by direct plating, the pathogen was isolated by enrichment in TSB for approximately another 30 d from pond and holding tank water. The populations of E. coli O157:H7 found in the internal organs and skin scrape were 5.5 log and 2.5 log CFU/ml, respectively. E. coli O157:H7 from internal organs and water were recovered for at least 12 d. Results suggest that E. coli O157:H7 can survive in channel catfish pond and holding tank water and channel catfish may become a potential carrier of the pathogen.     

The growth,survival and thermal inactivation of Escherichia coli O157:H7 in a traditional South African sausage

This study investigated the growth and survival of Escherichia coli O157:H7 inoculated into boerewors models with (B + P) and without (B − P) sulphur dioxide preservative at a low (L) and high (H) inoculum followed by storage at 0, 4 and 10 °C for 10 days. The pathogen’s thermal inactivation at 50, 60, 65 and 70 °C was also evaluated in B + P. The B − P at both low and high inocula had significantly higher recoveries at all temperatures compared to B + P. The BL + P and BH + P had significant reductions in recoveries at 0 °C, declining to below detectable limits at days 8 and 10, respectively. At 4 °C, the BL + P and BH + P recoveries declined significantly at day 10. At 10 °C, significant increases were observed from days 0 to day 10 in both models and at low and high inocula. At 0 °C, the BL − P and BH − P treatments had significant declines in recoveries. The combination of sulphur dioxide preservative and low temperature demonstrated the best efficacy against E. coli O157:H7 survival. Thermal inactivation of E. coli O157:H7 was 60 min at 60 °C, 80 s at 65 °C and 60 s at 70 °C. This study demonstrated that E. coli O157:H7 can survive in boerewors with and without preservative and is more sensitive to heat treatment at 70 °C.     

Inactivation of Salmonella and Escherichia coli O157:H7 on artificially contaminated alfalfa seeds using high hydrostatic pressure

Alfalfa sprouts contaminated with Salmonella and Escherichia coli O157:H7 have been implicated in several outbreaks of foodborne illnesses in recent years. The seed used for sprouting appears to be the primary source of pathogens. Seed decontamination prior to sprouting presents a unique challenge for the sprouting industry since cells of the pathogenic survivors although undetectable after sanitizing treatments, can potentially multiply back to hazardous levels. The focus of this study was to therefore test the efficacy of high hydrostatic pressure to eliminate a ∼5 log CFU/g load of Salmonella and E. coli O157:H7 on alfalfa seeds. Pressure treatment of 600 MPa for up to 25 min at 20 °C could not result in complete inactivation of Salmonella. High-pressure treatment was then carried out either at sub-ambient (4 °C) or elevated (40, 45 and 50 °C) temperatures to test the ability of high pressure to eliminate Salmonella. Pressure treatment at 4 and 20 °C did not deliver any satisfactory inactivation of Salmonella while high pressure at elevated temperatures achieved complete kill. Pre-soaking seeds prior to high-pressure treatment also enhanced pressure inactivation of Salmonella but at the expense of seed viability. High-pressure treatment of 500 MPa for 2 min at 45 °C was able to eliminate wild-type Salmonella and E. coli O157:H7 strains without bringing about any appreciable decrease in the seed viability.     

Control of Escherichia coli O157:H7 in corn silage with or without various inoculants: Efficacy and mode of action

This study aimed to evaluate the effectiveness of 3 commercial bacterial inoculants at controlling Escherichia coli O157:H7 in corn silages during ensiling and feedout phases of silage production. A second objective was to determine whether the inoculants exhibited and transferred antibacterial activity against E. coli O157:H7 to the silages. Chopped corn forage was ensiled after treatment with the following: distilled water (control); 5 × 10⁵ cfu/g of E. coli O157:H7 (EC); EC and 1 × 10⁶ cfu/g of Pediococcus pentosaceus and Propionibacterium freudenreichii (EC+BII); EC and 1 × 10⁶ cfu/g of Lactobacillus buchneri (EC+LB); and EC and 1 × 10⁶ cfu/g of L. buchneri and P. pentosaceus (EC+B500). Each treatment was ensiled in triplicate in mini silos for 3, 7, 31, and 82 d and analyzed for pH and E. coli O157:H7 counts. Samples from d 82 were also analyzed for volatile fatty acids, lactate, and aerobic stability. Antibacterial activity of inoculants and silages was determined by the Kirby-Bauer disc diffusion test. The pH of silages from all treatments decreased below 4 within 3 d of ensiling and remained low until d 82. Therefore, E. coli O157:H7 was not detected in silages after any of the ensiling durations. Applying inoculants containing L. buchneri resulted in less lactate, more acetate, and greater aerobic stability compared with the control. Applying EC+BII containing P. freudenreichii did not increase propionate or aerobic stability. Subsamples of d 82 silages were reinoculated with 1 × 10⁵ cfu/g of E. coli O157:H7 either immediately after silo opening on d 82 or after 144 h of aerobic exposure (d 88), and E. coli were enumerated 24 h later. All silages reinoculated with the pathogen on d 82 had similar, low pH values (<4) and no E. coli were detected 24 h later. Control, EC, and EC+BII silages reinoculated with the pathogen after 144 h of aerobic exposure had relatively greater pH values (4.71, 5.67, and 6.03, respectively) and E. coli counts (2.87, 6.73, and 6.87 log cfu/g, respectively) 24 h later, whereas those treated with L. buchneri had low pH values (<4) and undetectable (EC+B500) or 10-fold lower (1.97, cfu/g; EC+LB) E. coli counts. All pure cultures of commercial bacterial inoculants exhibited antibacterial activity independent of pH against E. coli O157:H7, but the pH-independent activity did not persist in the treated silages, suggesting that E. coli elimination from silages was mediated by pH reduction.     

Inactivation of Escherichia coli O157:H7 on stainless steel upon exposure to Paenibacillus polymyxa biofilms

We investigated the potential use of biofilm formed by a competitive-exclusion (CE) microorganism to inactivate Escherichia coli O157:H7 on a stainless steel surface. Five microorganisms showing inhibitory activities against E. coli O157:H7 were isolated from vegetable seeds and sprouts. The microorganism with the greatest antimicrobial activity was identified as Paenibacillus polymyxa (strain T5). In tryptic soy broth (TSB), strain T5 reached a higher population at 25 °C than at 12 or 37 °C without losing inhibitory activity against E. coli O157:H7. When P. polymyxa (6 log CFU/mL) was co-cultured with E. coli O157:H7 (2, 3, 4, or 5 log CFU/mL) in TSB at 25 °C, the number of E. coli O157:H7 decreased significantly within 24 h. P. polymyxa formed a biofilm on stainless steel coupons (SSCs) in TSB at 25 °C within 24 h, and cells in biofilms, compared to attached cells without biofilm formation, showed significantly increased resistance to a dry environment (43% relative humidity [RH]). With the exception of an inoculum of 4 log CFU/coupon at 100% RH, upon exposure to biofilm formed by P. polymyxa on SSCs, populations of E. coli O157:H7 (2, 4, or 6 log CFU/coupon) were significantly reduced within 48 h. Most notably, when E. coli O157:H7 at 2 log CFU/coupon was applied to SSCs on which P. polymyxa biofilm had formed, it was inactivated within 1 h, regardless of RH. These results will be useful when developing strategies using biofilms produced by competitive exclusion microorganisms to inactivate foodborne pathogens in food processing environments.     

Fate of Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella on fresh-cut celery

Illnesses from Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella have been associated with the consumption of numerous produce items. Little is known about the effect of consumer handling practices on the fate of these pathogens on celery. The objective of this study was to determine pathogen behavior at different temperatures under different storage conditions. Commercial fresh-cut celery was inoculated at ca. 3 log CFU/g onto either freshly cut or outer uncut surfaces and stored in either sealed polyethylene bags or closed containers. Samples were enumerated following storage for 0, 1, 3, 5, and 7 days when held at 4 °C or 12 °C, and after 0, 8, and 17 h, and 1, and 2 days when held at 22 °C. At 4 °C, all populations declined by 0.5–1.0 log CFU/g over 7 days. At 12 °C, E. coli O157:H7 and Salmonella populations did not change, while L. monocytogenes populations increased by ca. 0.5 log CFU/g over 7 days. At 22 °C, E. coli O157:H7, Salmonella, and L. monocytogenes populations increased by ca. 1, 2, or 0.3 log CFU/g, respectively, with the majority of growth occurring during the first 17 h. On occasion, populations on cut surfaces were significantly higher than those on uncut surfaces. Results indicate that populations are reduced under refrigeration, but survive and may grow at elevated temperatures.     

Effect of cooking procedures of kiymali pide,a traditional Turkish fast-food,on destruction of Escherichia coli O157:H7

The objective of the present study was to obtain data about cooking time and temperature of kiymali pide in the restaurants and to investigate thermal inactivation of E. coli O157:H7 during experimental kiymali pide making. A field study was conducted in randomly selected 23 of 87 pide restaurants. Processing parameters including oven temperature, cooking period and post-cooking temperature were determined. Kiymali pide samples were prepared using ground beef filling experimentally inoculated with E. coli O157:H7 (7.6 log₁₀ CFU/g). Pide samples were cooked at a conventional oven at 180 °C for 180, 240, 270, 300 and 330 s. Results of the current study suggest that cooking kiymali pide at 180 °C for at least 330 s (5.5 min) may provide sufficient food safety assurance (≥ 6 log₁₀ CFU/g) for E. coli O157:H7.     

Development of PCR assays for detection of Escherichia coli O157:H7 in meat products

A multiplex polymerase chain reaction (PCR) procedure based on fliC_h7 and rfbE genes was developed for the detection of Escherichia coli O157:H7 in raw pork meat and ready-to-eat (RTE) meat products. Two different DNA extraction procedures were evaluated for application on meat products. MasterPure™ DNA Purification kit in combination with immunomagnetic separation was found to be the best method in a meat system. The optimized PCR included an enrichment step in brilliant green bile 2% broth at 37 °C. This method was applied to artificially inoculated meat and RTE meat products with different concentrations of E. coli O157:H7. The results indicate that the PCR assay developed could sensitively and specifically detect E. coli O157:H7 in raw pork meat and RTE meat products in approximately 10 h, including a 6 h enrichment step. Thus, this method could be proposed for screening E. coli O157:H7 in raw pork and RTE meat products.     

Prevalence and antimicrobial susceptibility of Escherichia coli O157:H7 on beef cattle slaughtered in Amman abattoir

Cattle are the main asymptomatic reservoir of Escherichia coli O157:H7 which can cause illness to human. The objectives of the study were to measure the prevalence of E. coli O157:H7 on cattle slaughtered in Amman abattoir, detect virulence factors in the isolates, determine antibacterial resistance of the isolates, and know how the isolates are different or similar when compared to characterized isolates from developed countries.     

Cloning of genes encoding colicin E2 in Lactococcus lactis subspecies lactis and evaluation of the colicin-producing transformants as inhibitors of Escherichia coli O157:H7 during milk fermentation

Colicin E2 (ColE2) is a proteinaceous bacterial toxin produced by some strains of Escherichia coli and other members of the Enterobacteriaceae that exhibits inhibitory activity against some strains of E. coli O157:H7. A 2.0-kb DNA fragment, containing the ColE2 structural gene ceaB and immunity gene ceiB from E. coli NCTC 50133 (pColE2-P9), was cloned into the lactococcal plasmid vector pNZ2103. The lysis gene, celB, was not cloned. The plasmid, pLR-E2, encoding the cloned genes was transformed into E. coli DH5α and Lactococcus lactis ssp. lactis LM0230 and PN-1 using electroporation. The bacteriocin ColE2 was expressed in transformants of both E. coli and L. lactis ssp. lactis. Secretion of ColE2 into media was verified by spot-on-lawn assays and measurement of ColE2 activity in the growth medium of transformants. The level of ColE2 produced by transformants containing pLR-E2 was similar to that produced by the parental strain, E. coli NCTC 50133 (pColE2-P9). Evaluation of a ColE2-producing transformant of L. lactis ssp. lactis as a starter culture revealed that, although ColE2 was produced by transformants and could be detected in milk during fermentation, the inhibitory activity of ColE2 against E. coli O157:H7 was significantly decreased in milk compared with buffered growth medium.     

Antibacterial effects of natural tenderizing enzymes on different strains of Escherichia coli O157:H7 and Listeria monocytogenes on beef

This study determined the efficacy of actinidin and papain on reducing Listeria monocytogenes and three mixed strains of Escherichia coli O157:H7 populations on beef. The average reduction of E. coli O157:H7 was greater than that of L. monocytogenes and higher concentrations of either protease yielded greater reduction in bacterial populations. For instance, actinidin at 700 mg/ml significantly (p ≤ 0.05) reduced the population of L. monocytogenes by 1.49 log cfu/ml meat rinse after 3 h at 25 & 35 °C, and by 1.45 log cfu/ml rinse after 24 h at 5 °C, while the same actinidin concentration significantly reduced the populations of three mixed strains of E. coli O157:H7 by 1.81 log cfu/ml rinse after 3 h at 25 & 35 °C, and 1.94 log cfu/ml rinse after 24 h at 5 °C. These findings suggest that, in addition to improving the sensory attributes of beef, proteolytic enzymes can enhance meat safety when stored at suitable temperatures.