Effect of high pressure on fresh cheese shelf-life

The effect of high pressure (HP; 300 and 400 MPa for 5 min at 6 °C) on physico-chemical, microbial, color, texture and sensorial characteristics of starter-free fresh cheeses stored at 4 and 8 °C was studied. Physico-chemical parameters considered were total solids, fat, total protein, pH, whey loss and water activity. The microbiological quality was studied, on cheeses stored at 4 and 8 °C, by enumerating aerobic mesophilic bacteria, lactococci, psychrotrophic bacteria, Enterobacteriaceae, Escherichia coli, molds and yeasts. Cheeses treated at 300 and 400 MPa, stored at 4 °C, presented a shelf-life of 14 and 21 days, respectively, compared to untreated control cheese, which presented a shelf life of 7 days. On the other hand, HP treatments modified the texture (more firm) and color (more yellow) compared to control cheeses. These changes were detected by instrumental and sensory analysis.     

Rheology and melt characterization of low-fat and full fat Mozzarella cheese made from microfluidized milk

Microfluidization of cheese milk at different temperatures and pressures altered the meltability and rheological properties of Mozzarella cheese. Pasteurized milks, standardized to 1.0 (low-fat (LF)) or 3.2 (full fat (FF)) g fat/100 g milk, heated to 10, 43, or 54 °C, and then microfluidized at pressures of 34, 103, or 172 MPa, were used to manufacture Mozzarella cheese. Cheeses made from nonmicrofluidized milks served as controls. During the hot water step, only control cheeses and cheeses made with milk microfluidized at 10 °C could be stretched while all others had short curds that did not fuse together. Cheese responses to different stresses (heat, compression, torsion, and oscillatory shear) were measured after 1 and 6 weeks of storage. FF cheeses made with the control milks and milks processed at 10 °C/34 MPa or 10 °C/103 MPa were softer and less rigid, and had the lowest visco-elastic properties and the highest meltabilities of all the cheeses. Microfluidization of the cheese milk did not improve the melt or rheology of LF cheeses. Microfluidization of milk with fat in the liquid state at higher pressures resulted in smaller lipid droplets that altered the component interactions during the formation of the cheese matrix and resulted in LF and FF Mozzarella cheeses with poor melt and altered rheology.     

Effect of high-pressure treatments on proteolysis and texture of ewes’ raw milk La Serena cheese

La Serena cheeses, made from Merino ewes’ raw milk, were high-pressure (HP)-treated at 300 or 400 MPa for 10 min at 10 °C, on days 2 or 50 of ripening. Cheeses treated by HP on day 2 showed higher pH values than control cheese on day 3, but cheeses treated by HP on days 2 or 50 and control cheese had similar pH values on day 60. Breakdown of caseins was delayed by HP treatment of cheeses on day 2. Cheeses treated by HP on day 2 showed higher levels of hydrophilic peptides, lower levels of hydrophobic peptides, lower hydrophobic peptides: hydrophilic peptides ratios, and higher total contents of free amino acids than those of control cheese. HP treatment of cheese on day 50 scarcely affected proteolysis of 60-day-old cheeses. Fracturability, hardness and elasticity values of cheeses treated by HP on day 2 were higher than those of control cheese and of cheeses treated on day 50. Cheeses treated at 400 MPa on day 2 received the lowest scores for quality of taste from panellists, whereas the rest of HP-treated cheeses did not differ from control cheese.     

Volatile compounds, odor, and aroma of La Serena cheese high-pressure treated at two different stages of ripening

La Serena cheeses made from raw Merino ewe's milk were high-pressure (HP) treated at 300 or 400 MPa for 10 min on d 2 or 50 after manufacture. Ripening of HP-treated and control cheeses proceeded until d 60 at 8°C. Volatile compounds were determined throughout ripening, and analysis of related sensory characteristics was carried out on ripe cheeses. High-pressure treatments on d 2 enhanced the formation of branched-chain aldehydes and of 2-alcohols except 2-butanol, but retarded that of n-aldehydes, 2-methyl ketones, dihydroxy-ketones, n-alcohols, unsaturated alcohols, ethyl esters, propyl esters, and branched-chain esters. Differences between HP-treated and control cheeses in the levels of some volatile compounds tended to disappear during ripening. The odor of ripe cheeses was scarcely affected by HP treatments on d 2, but aroma quality and intensity scores were lowered in comparison with control cheese of the same age. On the other hand, HP treatments on d 50 did not influence either the volatile compound profile or the sensory characteristics of 60-d-old cheese.     

Microbial and sensory changes throughout the ripening of Prato cheese made from milk with different levels of somatic cells

The objective of this research was to evaluate the effects of 2 levels of raw milk somatic cell count (SCC) on the composition of Prato cheese and on the microbiological and sensory changes of Prato cheese throughout ripening. Two groups of dairy cows were selected to obtain low-SCC (<200,000 cells/mL) and high-SCC (>700,000 cells/mL) milks, which were used to manufacture 2 vats of cheese. The pasteurized milk was evaluated according to the pH, total solids, fat, total protein, lactose, standard plate count, coliforms at 45°C, and Salmonella spp. The cheese composition was evaluated 2 d after manufacture. Lactic acid bacteria, psychrotrophic bacteria, and yeast and mold counts were carried out after 3, 9, 16, 32, and 51 d of storage. Salmonella spp., Listeria monocytogenes, and coagulase-positive Staphylococcus counts were carried out after 3, 32, and 51 d of storage. A 2 × 5 factorial design with 4 replications was performed. Sensory evaluation of the cheeses from low- and high-SCC milks was carried out for overall acceptance by using a 9-point hedonic scale after 8, 22, 35, 50, and 63 d of storage. The somatic cell levels used did not affect the total protein and salt:moisture contents of the cheeses. The pH and moisture content were higher and the clotting time was longer for cheeses from high-SCC milk. Both cheeses presented the absence of Salmonella spp. and L. monocytogenes, and the coagulase-positive Staphylococcus count was below 1 × 10² cfu/g throughout the storage time. The lactic acid bacteria count decreased significantly during the storage time for the cheeses from both low- and high-SCC milks, but at a faster rate for the cheese from high-SCC milk. Cheeses from high-SCC milk presented lower psychrotrophic bacteria counts and higher yeast and mold counts than cheeses from low-SCC milk. Cheeses from low-SCC milk showed better overall acceptance by the consumers. The lower overall acceptance of the cheeses from high-SCC milk may be associated with texture and flavor defects, probably caused by the higher proteolysis of these cheeses.     

Fate of Staphylococcus aureus in cheese treated by ultrahigh pressure homogenization and high hydrostatic pressure

We evaluated the influence of ultrahigh pressure homogenization (UHPH) treatment applied to milk containing Staphylococcus aureus CECT 976 before cheese making, and the benefit of applying a further high hydrostatic pressure (HHP) treatment to cheese. The evolution of Staph. aureus counts during 30 d of storage at 8°C and the formation of staphylococcal enterotoxins were also assessed. Milk containing approximately 7.3 log₁₀ cfu/mL of Staph. aureus was pressurized using a 2-valve UHPH machine, applying 330 and 30 MPa at the primary and the secondary homogenizing valves, respectively. Milk inlet temperatures (T_in) of 6 and 20°C were assayed. Milk was used to elaborate soft-curd cheeses (UHPH cheese), some of which were additionally submitted to 10-min HHP treatments of 400 MPa at 20°C (UHPH+HHP cheese). Counts of Staph. aureus were measured on d 1 (24 h after manufacture or immediately after HHP treatment) and after 2, 15, and 30 d of ripening at 8°C. Counts of control cheeses not pressure-treated were approximately 8.5 log₁₀ cfu/g showing no significant decreases during storage. In cheeses made from UHPH treated milk at T_in of 6°C, counts of Staph. aureus were 5.0 ± 0.3 log₁₀ cfu/g at d 1; they decreased significantly to 2.8 ± 0.2 log₁₀ cfu/g on d 15, and were below the detection limit (1 log₁₀ cfu/g) after 30 d of storage. The use of an additional HHP treatment had a synergistic effect, increasing reductions up to 7.0 ± 0.3 log₁₀ cfu/g from d 1. However, for both UHPH and UHPH+HHP cheeses in the 6°C T_in samples, viable Staph. aureus cells were still recovered. For samples of the 20°C T_in group, complete inactivation of Staph. aureus was reached after 15 d of storage for both UHPH and UHPH+HHP cheese. Staphylococcal enterotoxins were found in controls but not in UHPH or UHPH+HHP treated samples. This study shows a new approach for significantly improving cheese safety by means of using UHPH or its combination with HHP.     

Nonstarter lactic acid bacteria biofilms and calcium lactate crystals in Cheddar cheese

A sanitized cheese plant was swabbed for the presence of nonstarter lactic acid bacteria (NSLAB) biofilms. Swabs were analyzed to determine the sources and microorganisms responsible for contamination. In pilot plant experiments, cheese vats filled with standard cheese milk (lactose:protein = 1.47) and ultrafiltered cheese milk (lactose:protein = 1.23) were inoculated with Lactococcus lactis ssp. cremoris starter culture (8 log cfu/mL) with or without Lactobacillus curvatus or Pediococci acidilactici as adjunct cultures (2 log cfu/mL). Cheddar cheeses were aged at 7.2 or 10°C for 168 d. The raw milk silo, ultrafiltration unit, cheddaring belt, and cheese tower had NSLAB biofilms ranging from 2 to 4 log cfu/100 cm². The population of Lb. curvatus reached 8 log cfu/g, whereas P. acidilactici reached 7 log cfu/g of experimental Cheddar cheese in 14 d. Higher NSLAB counts were observed in the first 14 d of aging in cheese stored at 10°C compared with that stored at 7.2°C. However, microbial counts decreased more quickly in Cheddar cheeses aged at 10°C compared with 7.2°C after 28 d. In cheeses without specific adjunct cultures (Lb. curvatus or P. acidilactici), calcium lactate crystals were not observed within 168 d. However, crystals were observed after only 56 d in cheeses containing Lb. curvatus, which also had increased concentration of d(−)-lactic acid compared with control cheeses. Our research shows that low levels of contamination with certain NSLAB can result in calcium lactate crystals, regardless of lactose:protein ratio.     

High-pressure processing decelerates lipolysis and formation of volatile compounds in ovine milk blue-veined cheese

Enzyme-rich cheeses are prone to over-ripening during refrigerated storage. Blue-veined cheeses fall within this category because of the profuse growth of Penicillium roqueforti in their interior, which results in the production of highly active proteinases, lipases, and other enzymes responsible for the formation of a great number of flavor compounds. To control the excessive formation of free fatty acids (FFA) and volatile compounds, blue-veined cheeses were submitted to high-pressure processing (HPP) at 400 or 600 MPa on d 21, 42, or 63 after manufacture. Cheeses were ripened for 30 d at 10°C and 93% relative humidity, followed by 60 d at 5°C, and then held at 3°C until d 360. High-pressure processing influenced the concentrations of acetic acid and short-chain, medium-chain, and long-chain FFA. The effect was dependent on treatment conditions (pressure level and cheese age at the time of treatment). The lowest concentrations of acetic acid and FFA were recorded for cheeses treated at 600 MPa on d 21; these cheeses showed the lowest esterase activity values. Acetic acid and all FFA groups increased during ripening and refrigerated storage. The 102 volatile compounds detected in cheese belonged to 10 chemical groups (5 aldehydes, 12 ketones, 17 alcohols, 12 acids, 35 esters, 9 hydrocarbons, 5 aromatic compounds, 3 nitrogen compounds, 3 terpenes, and 1 sulfur compound). High-pressure processing influenced the levels of 97 individual compounds, whereas 68 individual compounds varied during refrigerated storage. Total concentrations of all groups of volatile compounds were influenced by HPP, but only ketones, acids, esters, and sulfur compounds varied during refrigerated storage. The lowest total concentrations for most groups of volatile compounds were recorded for the cheese pressurized at 600 MPa on d 21. A principal component analysis combining total concentrations of groups of FFA and volatile compounds discriminated cheeses by age and by the pressure level applied to HPP cheeses.     

The fate of Listeria monocytogenes during the manufacture of Camembert-type cheese: A comparison between raw milk and milk treated with high hydrostatic pressure

Camembert-type cheese was produced from: raw bovine milk; raw milk inoculated with 2 or 4 log CFU/ml Listeria monocytogenes; raw milk inoculated with L. monocytogenes and subsequently pressure-treated at 500 MPa for 10 min at 20 °C; or uninoculated raw milk pressure-treated under these conditions. Cheeses produced from both pressure-treated milk and untreated milk had the typical composition, appearance and aroma of Camembert. Curd and cheese made from inoculated, untreated milk contained large numbers of L. monocytogenes throughout production. An initial inoculum of 1.95 log CFU/ml in milk increased to 4.52 log CFU/g in the curd and remained at a high level during ripening, with 3.85 log CFU/g in the final cheese. Pressure treatment inactivated L. monocytogenes in the raw milk at both inoculum levels and the pathogen was not detected in any of the final cheeses produced from pressure-treated milk. Therefore high pressure may be useful to inactivate L. monocytogenes in raw milk that is to be used for the production of soft, mould-ripened cheese.

Industrial relevance

This paper demonstrates the potential of high pressure (HP) for treatment of raw milk to be used in the manufacture of soft cheeses. HP treatment significantly reduced the level of Listeria monocytogenes in the raw milk and so allowed the production of safer non-thermally processed camembert-like soft cheese.     

Enhanced nutty flavor formation in cheddar cheese made with a malty Lactococcus lactis adjunct culture

Nutty flavor in Cheddar cheese is desirable, and recent research demonstrated that 2- and 3-methyl butanal and 2-methyl propanal were primary sources of nutty flavors in Cheddar. Because malty strains of Lac-tococcus lactis (formerly Streptococcus lactis var. malti-genes) are characterized by the efficient production of these and other Strecker aldehydes during growth, this study investigated the influence of a malty L. lactis adjunct culture on nutty flavor development in Cheddar cheese. Cheeses made with different adjunct levels (0, 10⁴ cfu/mL, and 10⁵ cfu/mL) were ripened at 5 or 13°C and analyzed after 1 wk, 4 mo, and 8 mo by a combination of instrumental and sensory methods to characterize nutty flavor development. Cheeses ripened at 13°C developed aged flavors (brothy, sulfur, and nutty fla-vors) more rapidly than cheeses held at 5°C. Additionally, cheeses made with the adjunct culture showed more rapid and more intense nutty flavor development than control cheeses. Cheeses that had higher intensities of nutty flavors also had a higher concentration of 2/3-methyl butanal and 2-methyl propanal compared with control cheeses, which again confirmed that these compounds are a source of nutty flavor in Cheddar cheese. Results from this study provide a simple methodology for cheese manufacturers to obtain consistent nutty flavor in Cheddar cheese.     

Improvement of texture and structure of reduced-fat Cheddar cheese by exopolysaccharide-producing lactococci

The objective of this study was to evaluate the effect of capsular and ropy exopolysaccharide (EPS)-producing strains of Lactococcus lactis ssp. cremoris on textural and microstructural attributes during ripening of 50%-reduced-fat Cheddar cheese. Cheeses were manufactured with added capsule- or ropy-forming strains individually or in combination. For comparison, reduced-fat cheese with or without lecithin added at 0.2% (wt/vol) to cheese milk and full-fat cheeses were made using EPS-nonproducing starter, and all cheeses were ripened at 7°C for 6 mo. Exopolysaccharide-producing strains increased cheese moisture retention by 3.6 to 4.8% and cheese yield by 0.28 to 1.19 kg/100 kg compared with control cheese, whereas lecithin-containing cheese retained 1.4% higher moisture and had 0.37 kg/100 kg higher yield over the control cheese. Texture profile analyses for 0-d-old cheeses revealed that cheeses with EPS-producing strains had less firm, springy, and cohesive texture but were more brittle than control cheeses. However, these effects became less pronounced after 6 mo of ripening. Using transmission electron microscopy, fresh and aged cheeses with added EPS-producing strains showed a less compact protein matrix through which larger whey pockets were dispersed compared with control cheese. The numerical analysis of transmission electron microscopy images showed that the area in the cheese matrix occupied by protein was smaller in cheeses with added EPS-producing strains than in control cheese. On the other hand, lecithin had little impact on both cheese texture and microstructure; after 6 mo, cheese containing lecithin showed a texture profile very close to that of control reduced-fat cheese. The protein-occupied area in the cheese matrix did not appear to be significantly affected by lecithin addition. Exopolysaccharide-producing strains could contribute to the modification of cheese texture and microstructure and thus modify the functional properties of reduced-fat Cheddar cheese.     

Low-fat mozzarella as influenced by microbial exopolysaccharides, preacidification, and whey protein concentrate

Low-fat Mozzarella cheeses containing 6% fat were made by preacidification of milk, preacidification combined with exopolysaccharide- (EPS-) producing starter, used independently or as a coculture with non-EPS starter, and preacidification combined with whey protein concentrate (WPC) and EPS. The impact of these treatments on moisture retention, changes in texture profile analysis, cheese melt, stretch, and on pizza bake performance were investigated over 45 d of storage at 4°C. Preacidified cheeses without EPS (control) had the lowest moisture content (53.75%). These cheeses were hardest and exhibited greatest springiness and chewiness. The meltability and stretchability of these cheeses increased most during the first 28 d of storage. The moisture content in cheeses increased to 55.08, 54.79, and 55.82% with EPS starter (containing 41.18 mg/g of EPS), coculturing (containing 28.61 mg/g of EPS), and WPC (containing 44.23 mg/g of EPS), respectively. Exopolysaccharide reduced hardness, springiness, and chewiness of low-fat cheeses made with preacidified milk in general and such cheeses exhibited an increase in cohesiveness and meltability. Although stretch distance was similar in all cheeses, those containing EPS were softer than the control. Cocultured cheeses exhibited the greatest meltability. Cheeses containing WPC were softest in general; however, hardness remained unchanged over 45 d. Cheeses made with WPC had the least increase in meltability over time. Incorporation of WPC did not reduce surface scorching or increase shred fusion of cheese shreds during pizza baking; however, there was an improvement in these properties between d 7 and 45. Coating of the cheese shreds with oil was necessary for adequate browning, melt, and flow characteristics in all cheese types.     

Gas-flushed packaging contributes to calcium lactate crystals in Cheddar cheese

Gas-flushed packaging is commonly used for cheese shreds and cubes to prevent aggregation and loss of individual identity. Appearance of a white haze on cubed cheese is unappealing to consumers, who may refrain from buying, resulting in lost revenue to manufacturers. The objective of this study was to determine whether gas flushing of Cheddar cheese contributes to the occurrence of calcium lactate crystals (CLC). Cheddar cheese was manufactured using standard methods, with addition of starter culture, annatto, and chymosin. Two different cheese milk compositions were used: standard (lactose:protein = 1.47, protein:fat = 0.90, lactose = 4.8%) and ultrafiltered (UF; lactose:protein = 1.23, protein:fat = 0.84, lactose = 4.8%), with or without adjunct Lactobacillus curvatus. Curds were milled when whey reached 0.45% titratable acidity, and pressed for 16 h. After aging at 7.2°C for 6 mo, cheeses were cubed (1 × 1 × 4 cm) and either vacuum-packaged or gas-flushed with carbon dioxide, nitrogen, or a 50:50 mixture of carbon dioxide and nitrogen, then aged for an additional 3 mo. Heavy crystals were observed on surfaces of all cubed cheeses that were gas-flushed, but not on cheeses that were vacuum-packaged. Cheeses without Lb. curvatus exhibited l(+)-CLC on surfaces, whereas cheeses with Lb. curvatus exhibited racemic mixtures of l(+)/d(−)-CLC throughout the cheese matrices. The results show that gas flushing (regardless of gas composition), milk composition, and presence of nonstarter lactic acid bacteria, can contribute to the development of CLC on cheese surfaces. These findings stress the importance of packaging to cheese quality.     

Effect of high-pressure treatment and a bacteriocin-producing lactic culture on the proteolysis, texture, and taste of Hispánico cheese

The effects of high-pressure treatment, by itself or in combination with a bacteriocin-producing culture added to milk, on the proteolysis, texture, and taste of Hispánico cheese were investigated. Two vats of cheese were manufactured from a mixture of cow and ewe milk. Milk in one vat was inoculated with 0.5% Lactococcus lactis ssp. lactis INIA 415, a nisin Z and lacticin 481 producer; 0.5% L. lactis ssp. lactis INIA 415-2, a bacteriocin-nonproducing mutant; and 2% of a commercial Streptococcus thermophilus culture. Milk in the other vat was inoculated with 1% L. lactis ssp. lactis INIA 415-2 and 2% S. thermophilus culture. After ripening for 15 d at 12°C, half of the cheeses from each vat were treated at 400 MPa for 5 min at 10°C. Ripening of high-pressure-treated and untreated cheeses continued at 12°C until d 50. High-pressure treatment of cheese made from milk without the bacteriocin producer accelerated casein degradation and increased the free AA content, but it did not significantly influence the taste quality or taste intensity of the cheese. Addition of the bacteriocin producer to milk lowered the ratio of hydrophobic peptides to hydrophilic peptides, increased the free AA content, and enhanced the taste intensity. The combination of milk inoculation with the bacteriocin producer and high-pressure treatment of the cheese resulted in higher levels of both hydrophobic and hydrophilic peptides but had no significant effect on the free AA content, taste quality, or taste intensity.     

Proteolysis and biogenic amine buildup in high-pressure treated ovine milk blue-veined cheese

Penicillium roqueforti plays an important role in the ripening of blue-veined cheeses, mostly due to lactic acid consumption and to its extracellular enzymes. The strong activity of P. roqueforti proteinases may bring about cheese over-ripening. Also, free amino acids at high concentrations serve as substrates for biogenic amine formation. Both facts result in shorter product shelf-life. To prevent over-ripening and buildup of biogenic amines, blue-veined cheeses made from pasteurized ovine milk were high-pressure treated at 400 or 600 MPa after 3, 6, or 9 wk of ripening. Primary and secondary proteolysis, biogenic amines, and sensory characteristics of pressurized and control cheeses were monitored for a 90-d ripening period, followed by a 270-d refrigerated storage period. On d 90, treatments at 400 MPa had lowered counts of lactic acid bacteria and P. roqueforti by less than 2 log units, whereas treatments at 600 MPa had reduced lactic acid bacteria counts by more than 4 log units and P. roqueforti counts by more than 6 log units. No residual α-casein (CN) or κ-CN were detected in control cheese on d 90. Concentrations of β-CN, para-κ-CN, and γ-CN were generally higher in 600 MPa cheeses than in the rest. From d 90 onwards, hydrophilic peptides were at similar levels in pressurized and control cheeses, but hydrophobic peptides and the hydrophobic-to-hydrophilic peptide ratio were at higher levels in pressurized cheeses than in control cheese. Aminopeptidase activity, overall proteolysis, and free amino acid contents were generally higher in control cheese than in pressurized cheeses, particularly if treated at 600 MPa. Tyramine concentration was lower in pressurized cheeses, but tryptamine, phenylethylamine, and putrescine contents were higher in some of the pressurized cheeses than in control cheese. Differences in sensory characteristics between pressurized and control cheeses were generally negligible, with the only exception of treatment at high pressure level (600 MPa) at an early ripening stage (3 wk), which affected biochemical changes and sensory characteristics.     

Improvement in melting and baking properties of low-fat Mozzarella cheese

Low-fat cheeses dehydrate too quickly when baked in a forced air convection oven, preventing proper melting on a pizza. To overcome this problem, low-fat Mozzarella cheese was developed in which fat is released onto the cheese surface during baking to prevent excessive dehydration. Low-fat Mozzarella cheese curd was made with target fat contents of 15, 30, 45, and 60 g/kg using direct acidification of the milk to pH 5.9 before renneting. The 4 portions of cheese curd were comminuted and then mixed with sufficient glucono-δ-lactone and melted butter (45, 30, 15, or 0 g/kg, respectively), then pressed into blocks to produce low-fat Mozzarella cheese with about 6% fat and pH 5.2. The cheeses were analyzed after 15, 30, 60, and 120 d of storage at 5°C for melting characteristics, texture, free oil content, dehydration performance, and stretch when baked on a pizza at 250°C for 6 min in a convection oven. Cheeses made with added butter had higher stretchability compared with the control cheese. Melting characteristics also improved in contrast to the control cheese, which remained in the form of shreds during baking and lacked proper melting. The cheeses made with added butter had higher free oil content, which correlated (R² ≥ 0.92) to the amount of butterfat added, and less hardness and gumminess compared with the control low fat cheese.     

Effect of high-pressure-processing on the microbiology,proteolysis, texture and flavour of Brie cheese during ripening and refrigerated storage

Brie cheeses were high pressure (HP)-treated at 400 or 600 MPa on days 14 or 21 after manufacture to prevent over-ripening. Lactic acid bacteria and Penicillium camemberti numbers declined markedly after HP treatment. In control cheese pH increased 2.0 units from day 21 to day 60, but less than 0.3 units in HP-treated cheeses. Cheeses treated at 600 MPa showed the maximum concentrations of residual caseins during refrigerated storage and control cheese the minimum concentrations. A 7.6-fold increase in hydrophobic peptides was recorded from day 21 to day 60 in control cheese and 0.8–1.6-fold increases in HP-treated cheeses. The maximum aminopeptidase activity was detected in control cheese, the highest free amino acid concentrations in cheeses treated at 400 MPa. The firmest texture was recorded for cheeses treated on day 14 at 400 or 600 MPa. HP-treated cheeses showed higher flavour quality scores than control cheese from day 60 onwards.     

Effects of the concentration of insoluble calcium phosphate associated with casein micelles on the functionality of directly acidified cheese

Directly acidified cheeses with different insoluble Ca (INS Ca) contents were made to test the hypothesis that the removal of INS Ca from casein micelles (CM) would directly contribute to the softening and flow behavior of cheese at high temperature. Skim milk was directly acidified with dilute lactic acid to pH values of 6.0, 5.8, 5.6, or 5.4 to remove INS Ca (pH trial). Lowering milk pH also reduced protein charge repulsion, which could influence melt. In a second treatment, EDTA (0, 2, 4, or 6 mM) was added to skim milk that was subsequently acidified to pH 6.0 (EDTA trial). Both types of milks were then made into directly acidified cheese. Cheese properties were determined at approximately 10 h after pressing to reduce possible confounding effects of proteolysis. The INS Ca content was determined by the acid-base titration method. Dynamic low-amplitude oscillatory rheology was used to measure the viscoelastic properties of cheese during heating from 5 to 80°C. The composition of all cheeses was as similar as possible, with cheese-making procedures being modified to obtain similar moisture contents (∼55%). Insoluble Ca contents of cheeses significantly decreased with a reduction in pH or with the addition of EDTA to skim milk. The pH values of cheeses in the pH trial varied, but all cheeses in the EDTA trial had similar pH values (∼5.73). In the pH trial, the reduction in cheese pH and consequent decrease in INS Ca content resulted in a reduction in the G′ values of cheeses at 20°C. In contrast, the G′ values at 20°C in cheeses from the EDTA trial increased with EDTA addition up to 4 mM EDTA. The G′ values at 70°C of cheeses from the pH trial decreased with a decrease in cheese pH, and a similar decrease was observed in the G′ values of cheese from the EDTA trial with an increase in EDTA concentration even though these cheeses had a similar pH value. In both trials, loss tangent (LT) values increased with temperatures >30°C and reached a maximum at approximately 70°C. In the pH trial, LT values at 70°C increased from 1.50 to 4.24 with a decrease in cheese pH from 5.78 to 5.21. The LT values increased from 1.43 to 3.23 with an increase in the concentration of added EDTA from 0 to 6 mM. In the EDTA trial, the decrease in G′ and increase in LT values at 70°C were due to the reduction in INS Ca content, because the pH values of these cheeses were the same. It can be concluded that the loss of INS Ca increases the melting in cheeses that have the same pH and gross chemical composition, and removal of INS Ca can even make cheese at high pH (∼5.73) exhibit reasonable melt characteristics.     

Milk clotting and proteolytic activity of an enzyme preparation from Bromelia hieronymi fruits

A new enzyme preparation (hieronymain), obtained from unripe fruits of Bromelia hieronymi Mez (Bromeliaceae), was assayed for its ability to clot milk and hydrolyze bovine casein and milk whey proteins. Caseinolytic activity at 30 °C and pH 6.5 (milk clotting conditions) was 3.3 Ucas/mL and milk clotting activity was 40 ± 0.2 IMCU/mL. The κ-casein fraction, involved in the clotting formation, began to be degraded after 10 min of reaction, while the degradation of the other casein fractions proceeded slowly enough as to guarantee the production of a firm curd, with no evidence of extensive hydrolysis, a necessary condition for cheese making. In the case of whey proteins, bovine serum albumin and α-lactalbumin were quickly degraded after 30 min, while β-lactoglobulin was considerably degraded only after 60 min at 50 °C. Miniature cheeses were manufactured both with chymosine and hieronymain and analyzed by a taste panel, who found acceptable both cheeses. Hieronymain might be appropriate for cheese making, as well as for the production of milk protein hydrolysates.