Factors affecting hazardous waste solidification/stabilization: a review

Solidification/stabilization is accepted as a well-established disposal technique for hazardous waste. As a result many different types of hazardous wastes are treated with different binders. The S/S products have different property from waste and binders individually. The effectiveness of S/S process is studied by physical, chemical and microstructural methods. This paper summarizes the effect of different waste stream such as heavy metals bearing sludge, filter cake, fly ash, and slag on the properties of cement and other binders. The factors affecting strength development is studied using mix designs, including metal bearing waste alters the hydration and setting time of binders. Pore structure depends on relative quantity of the constituents, cement hydration products and their reaction products with admixtures. Carbonation and additives can lead to strength improvement in waste-binder matrix.     

Factors to evaluate a patent in addition to citations

The emergence of patent citations as a tool for patent estimation has been subjected to equally vocal champions and critics. In additional to patent citation, this article aims to contribute other factors, including court decisions, claim language, extension cases, patent family and portfolio, which should be deliberated during patent evaluation. It introduces the subject-matter by discussing the specialties and peculiarities of these proposed factors. Furthermore, comparisons between the patent citations and these factors are presented by illustrating several well-known patents. The results of the comparisons reveal that an adverse conclusion might be drawn if a patent is estimated only based on citations. The conclusion supports Meyer’s study that “the general nature of a common framework for both scientific and patent citations would severely limit its usefulness.” Therefore, those factors discussed in the article would be a great asset in patent evaluation. However, it only illustrates their impact on patent estimation using a couple well-known patents. Future research would be needed to investigate these factors in a more detailed manner.     

Organizational routines: a review of the literature

Over twenty years have passed since Nelson and Winter put theconcept of routines firmly at the center of the analysis oforganizational and economic change. A growing number of researchershave followed their example since. However, researchers havenot always had the same idea of what routines are and what effectthey have on organizations. Over time, this has left the literatureon routines riddled with ambiguities. For researchers who wantto apply the concept of routines in their research, it is noteasy to get an overview of the current thinking about routinesand their effects. This article offers a systematic review ofthe literature that has contributed to the theoretical developmentof the concept of routines, and of the empirical literaturethat has applied the concept of routines.     

Ecofriendly geopolymer concrete: a comprehensive review

Clean Technologies and Environmental Policy - After ordinary Portland cement (OPC) concrete, geopolymer concrete (GPC) is the most advanced form of concrete. GPC has many advantages including...     

Potential fabric-reinforced composites: a comprehensive review

Journal of Materials Science - Fabric-based laminated composites are used considerably for multifaceted applications in the automotive, transportation, defense, and structural construction sectors....     

Self-correction of science: a comparative study of negative citations and post-publication peer review

Scientometrics - This study investigates whether negative citations in articles and comments posted on post-publication peer review platforms are both equally contributing to the correction of...     

Computer models for identifying instrumental citations in the biomedical literature

The most popular method for evaluating the quality of a scientific publication is citation count. This metric assumes that a citation is a positive indicator of the quality of the cited work. This assumption is not always true since citations serve many purposes. As a result, citation count is an indirect and imprecise measure of impact. If instrumental citations could be reliably distinguished from non-instrumental ones, this would readily improve the performance of existing citation-based metrics by excluding the non-instrumental citations. A citation was operationally defined as instrumental if either of the following was true: the hypothesis of the citing work was motivated by the cited work, or the citing work could not have been executed without the cited work. This work investigated the feasibility of developing computer models for automatically classifying citations as instrumental or non-instrumental. Instrumental citations were manually labeled, and machine learning models were trained on a combination of content and bibliometric features. The experimental results indicate that models based on content and bibliometric features are able to automatically classify instrumental citations with high predictivity (AUC = 0.86). Additional experiments using independent hold out data and prospective validation show that the models are generalizeable and can handle unseen cases. This work demonstrates that it is feasible to train computer models to automatically identify instrumental citations.     

Succinct effect or informative effect: the relationship between title length and the number of citations

Previous studies produced mixed results with respect to the correlation between title length and number of citations. This research aims to provide a new explanation for this controversy by examining one of the largest pools of papers to date, containing over 300,000 economics papers spanning a much longer time period (1956–2012). The results show that correlation between title length and the number of citations is negative between 1956 and 2000, but becomes positive after 2000, when online searches became the predominant method for literature retrieval. Moreover, heterogeneity analyses show that longer titles are especially crucial for papers with relatively lower influence, which researchers can typically only access using online searches.     

Software review: COCI,the OpenCitations Index of Crossref open DOI-to-DOI citations

Scientometrics - In this paper, we present COCI, the OpenCitations Index of Crossref open DOI-to-DOI citations ( http://opencitations.net/index/coci ). COCI is the first open citation index created...     

Warehouse performance measurement: a literature review

As the supply chains get more complex, the variety of indicators and tools to measure warehouse performance has also increased. Furthermore, the metrics that are used for performance evaluation are assessed in different manners and hence there is not clear definition for some of these metrics. To address these issues, this literature review focuses on operational warehouse performance measurement, for which the warehouse managers need to carry out periodic analysis. Using the content analysis method, performance indicators are acquired from selected papers and are classified according to time, cost, quality and productivity dimensions. The contributions of this literature review are as follows: we present a synthesis of the literature on operational warehouse performance, we provide the definitions for the performance indicators and a framework to demonstrate their boundaries and, finally, based on the literature analysis, we also provide some discussions on current trends in warehouses and propose future research directions on warehouse performance evaluation.     

Factors affecting the transformation of a pyritic tailing: scaled-up column tests

Two different methods for predicting the quality of the water draining from a pyritic tailing are compared; for this, a static test (ABA test) and a kinetic test in large columns were chosen. The different results obtained in the two experimental set-ups show the necessity of being careful in selecting both the adequate predictive method and the conclusions and extrapolations derived from them. The tailing chosen for the weathering tests (previously tested in shake flasks and in small weathering columns) was a pyritic residue produced in a flotation plant of complex polymetallic sulphides (Huelva, Spain). The ABA test was a modification of the conventional ABA test reported in bibliography. The modification consisted in the soft conditions employed in the digestion phase. For column tests, two identical methacrylate columns (150 cm high and 15 cm diameter) were used to study the chemical and microbiological processes controlling the leaching of pyrite. The results obtained in the two tests were very different. The static test predicted a strong potential acidity for the tailing. On the contrary, pH value in the effluents draining from the columns reached values of only 5 units, being the concentration of metals (<600 mg/L) and sulphate ions (<17,000 mg/L) very small and far from the values of a typical acid mine drainage. In consequence, the static test may oversize the potential acidity of the tailing; whereas large columns may be saturated in water, displacing the oxygen and inhibiting the microbial activity necessary to catalyse mineral oxidation.     

Comparison of number of citations to full original articles versus brief reports

Most biomedical journals accept original research articles in the form of “brief reports”. We compared the citations to full papers versus brief reports in a sample of journals on Infectious Diseases, Clinical Microbiology, and Antimicrobial Agents. Brief reports were cited less often than full-size articles [regression coefficient: 10.94 (95 % CI: 5.19, 16.69)] even after adjustment for the journal’s impact factor. Our findings may influence decisions of editors and authors regarding brief reports.     

Supply chain risk management: a literature review

Risk management plays a vital role in effectively operating supply chains in the presence of a variety of uncertainties. Over the years, many researchers have focused on supply chain risk management (SCRM) by contributing in the areas of defining, operationalising and mitigating risks. In this paper, we review and synthesise the extant literature in SCRM in the past decade in a comprehensive manner. The purpose of this paper is threefold. First, we present and categorise SCRM research appearing between 2003 and 2013. Second, we undertake a detailed review associated with research developments in supply chain risk definitions, risk types, risk factors and risk management/mitigation strategies. Third, we analyse the SCRM literature in exploring potential gaps.     

Comparison of scientific impact expressed by the number of citations in different fields of science

Summary Citation distributions for 1992, 1994, 1996, 1997, 1999, and 2001, which were published in the 2004 report of the National Science Foundation, USA, are analyzed. It is shown that the ratio of the total number of citations of any two broad fields of science remains close to constant over the analyzed years. Based on this observation, normalization of total numbers of citations with respect to the number of citations in mathematics is suggested as a tool for comparing scientific impact expressed by the number of citations in different fields of science.     

Ergonomics aspects of knob designs: a literature review

Hand-related apparatus designs that fail to accommodate appropriate hand postures can cause hand-related musculoskeletal disorders. While there have been studies on the handling and design of various hand-related apparatus, little has been written on the ergonomics aspects of knob designs. The aim of this paper is to review various knob designs and their ergonomics aspects. The literature review suggests that gearshift knobs, door knobs, gas valve knobs, butterfly nuts and screw knobs are common knobs used for daily living activities. Other knobs like the convex, knurled, spherical, cone-shaped and ridged knob are often used for industrial-related applications. The ergonomics considerations identified in knobs include aesthetic attraction, position, torque requirement and shape-coding. This literature review can be used as groundwork for the development of ergonomics theory and hand-related studies. Engineers can use this literature review to identify certain ergonomics aspects in knobs to improve equipment designs, operating efficiency and working comfort.     

Factors affecting the hygroexpansion of paper

Paper is a widely used packaging material and is nowadays regaining importance, e.g., as bio-based and biodegradable material. Moreover, new technologies such as polymer–fiber composites, printed electronics and the deep drawing of paper are developing. The process stability and also the resulting quality of paper converting processes such as coating, metallization, printing, and the printing of electronics are highly affected by the hygroexpansion of paper. In order to reduce production instability and to choose and develop paper substrates with ideal characteristics, critical parameters need to be known. This paper offers an extensive overview of those parameters, starting at a molecular and microscopic level with the effect of the constituents and morphology of single fibers, before moving on to paper contents, chemical modifications and additives and finally concluding with paper production and fiber network modification. It was found that the major influences are single fiber sorption, inter-fiber contacts, microfibril angle, fiber morphology (length, width, curliness) and fiber orientation. This review gives new ideas and insights for technologists working in research, development and production optimization of paper-based products.     

A comprehensive literature review and analysis of the design,balancing and scheduling of assembly systems

This paper reports the results of a comprehensive review and analysis of the assembly line balancing literature. Quantitative developments and qualitative issues are addressed at both the strategic and tactical levels. The numerous quantitative and qualitative factors which the literature mentions could impact the design, balancing and scheduling of assembly systems are organized into an eight-level hierarchical, factor/decision taxomony. This comprehensive taxonomy is used to assess our progress in assembly system design and operation. Finally, from the results of the literature review and progress assessment, suggestions for future research on socio-technical assembly systems are offered.     

Authors and their citations: a point of view

Scientometrics - This letter describes how a large number of citations for particular publications are pleasing but how a low number is not, especially when the author thinks that some of the...