Development of formulations for reduced‐sugar and sugar‐free agar‐based fruit jellies

Because of the increasing consumer awareness of health‐related issues, there is a rising demand for noncariogenic, reduced‐energy confectionery products. This study was carried out to develop formulations for reduced‐sugar and sugar‐free, agar‐based jelly products. This was obtained by substituting sucrose and glucose syrup through a combination of sugar replacers, fibre, gelling agents and sweeteners. The application of a combination of polydextrose, oligofructose, sucralose and erythritol resulted in a sensory sweetness profile that was comparable to that of a sugar‐containing standard product. Concerning texture and sensory properties, reduced‐sugar and sugar‐free jellies processed using the respective formulations were comparable to the sugar‐containing standard products. Consumer evaluation using the Just‐about‐right technique exhibited satisfactory acceptance of the sugar‐free jellies.     

Antimicrobial activity of gelatin films based on duck feet containing cinnamon leaf oil and their applications in packaging of cherry tomatoes

Food Science and Biotechnology - Duck feet gelatin (DFG) films were prepared and applied to the packaging of cherry tomatoes. Cinnamon leaf oil (CLO) was incorporated into the DFG films at...     

Antioxidant activity and properties of gelatin films incorporated with tea polyphenol‐loaded chitosan nanoparticles

BACKGROUND: Gelatin film is widely used for the protection of food quality. In order to improve its antioxidant activity, natural antioxidant tea polyphenol‐loaded chitosan nanoparticles (TPCN) were prepared and incorporated into gelatin film. The antioxidant effect of TPCN against the oxidation of fish oil was investigated, as well as the release of TP from nanoparticles in the film. RESULTS: The incorporation of TPCN greatly decreased the tensile strength and oxygen permeability but increased the water vapour permeability and affected the transparency of gelatin film. Scanning electron microscopy images indicated that extensive interference was embedded with TPCN in the film microstructure. The peroxide value of fish oil packaged with films incorporated with TPCN was lower than that of fish oil packaged with control films during the incubation period. The radical‐scavenging activity of films incorporated with TPCN was higher than that of control films, and increasing radical‐scavenging activity of the former was observed during the storage period. CONCLUSION: The antioxidant activity and properties of gelatin film were affected by TPCN incorporation and storage time. Also, the oxidation of fish oil was retarded. The addition of TPCN could improve the antioxidant activity of gelatin film, and the release of TP from nanoparticles in the film was achieved during the storage period. Copyright © 2009 Society of Chemical Industry     

Antimicrobial activity of chitosan‐based films against Salmonella typhimurium and Staphylococcus aureus

The antibacterial effect of polyamide 6/66‐chitosan blend and chitosan‐coated plastic films was compared to chitosan films and chitosan solution, against Salmonella typhimurium and Staphylococcus aureus. The chitosan films did not show inhibition halos; however, contact inhibition was observed. During the tests, the films absorbed moisture, increasing of the diameter discs in relation to the concentration of the chitosan for both microorganisms at least 31%. Chitosan plastic film coating (bilayer system) showed only contact inhibition, without increase in contact area. The films from polyamide 6/66‐chitosan blend had no antibacterial activity. The highest inhibitory effect resulted from a chitosan solution at 1000 and 2000 ppm for S. typhimurium and S. aureus, respectively. The results of this study showed that the antimicrobial activity was lessened when the chitosan was combined with the plastic matrix because of the absence of contact inhibition, and the best activity was obtained with films prepared by casting of chitosan solution.     

Inhibition of Salmonella on poultry skin using protein- and polysaccharide-based films containing a nisin formulation

The objective of this study was to examine the use of protein- arid polysaccharide-based films containing bacteriocin formulations for inhibiting salmonellae on fresh broiler skin. The lethality of the films containing a nisin-based formulation was determined against Salmonella Typhimurium-contaminated broiler drumstick skin samples coated with the film. In the first study, varying concentrations of nisin (0, 100, 300, and 500 microg/ml) plus 3% citric acid, 5.0 mM EDTA, and 0.5% Tween 80 were incorporated into 0.5% calcium alginate films at a 20% level (wt/wt) and then applied to Salmonella TyphimuriumNAr-contaminated skin samples (log10 5.0) at a 1:2 weight ratio (film:skin). Salmonella TyphimuriumNAr skin population reductions ranged from 1.98 to 3.01 log cycles after a 72-h exposure at 4 degrees C. In comparison to the 0- and 100-microg/ml nisin concentrations, significantly greater population reductions were achieved at nisin concentrations of 300 and 500 microg/ml. In related studies, the 500-degreesg/ml nisin formulation was incorporated into 0.75 and 1.25% agar gels and applied to contaminated broiler drumstick skin samples (log10 7.0). Salmonella TyphimuriumNAr skin population reductions following a 96-h exposure at 4 degrees C were 1.8-(1.25% agar gel) and 4.6-log cycles (0.75% agar gel). These results demonstrated that the inclusion of nisin-based treatments into either calcium alginate or agar gels that were subsequently applied to contaminated broiler drumstick skin yielded significant Salmonella TyphimuriumNAr population reductions ranging between 1.8 to 4.6 log cycles after 72 to 96 h of exposure at 4 degrees C. The level of kill was affected by film type and gel concentration (i.e., gel network formation), exposure time, and nisin concentration.     

Antimicrobial activity of buckwheat starch films containing zinc oxide nanoparticles against Listeria monocytogenes on mushrooms

Buckwheat starch (BS) films containing zinc oxide nanoparticles (ZnO‐N; 0%, 1.5%, 3% and 4.5%) were prepared, and their physical, optical and antimicrobial properties were examined. As ZnO‐N content increased from 0% to 4.5%, TS increased from 14.99 to 19.09 MPa and E decreased from 25.60% to 20.65%. In addition, L* and a* values decreased, whereas b*, ΔE and opacity increased. Regarding antimicrobial activity, the BS/ZnO‐N films had the reductions of 2.96–3.74 log CFU mL^?1 against Listeria monocytogenes after 8 h based on viable cell count assay. The BS film containing 3% ZnO‐N, an optimal concentration chosen in this study, was applied to fresh‐cut mushroom packaging, and the film exhibited antimicrobial activity against L. monocytogenes, resulting in a reduction of 0.86 log CFU g^?1 after 6 days of storage. Thus, these results indicate that the BS/ZnO‐N film can be used as a biodegradable packaging material.     

Properties of novel hydroxypropyl methylcellulose films containing chitosan nanoparticles

In this study, chitosan nanoparticles were prepared and incorporated in hydroxypropyl methylcellulose (HPMC) films under different conditions. Mechanical properties, water vapor and oxygen permeability, water solubility, and scanning and transmission electron microscopy (SEM and TEM) results were analyzed. Incorporation of chitosan nanoparticles in the films improved their mechanical properties significantly, while also improving film barrier properties significantly. The chitosan poly(methacrylic acid) (CS-PMAA) nanoparticles tend to occupy the empty spaces in the pores of the HPMC matrix, inducing the collapse of the pores and thereby improving film tensile and barrier properties. This study is the first to investigate the use of nanoparticles for the purpose of strengthening HPMC films.     

Antimicrobial activity of nisin incorporated in pectin and polylactic acid composite films against Listeria monocytogenes

An extruded composite food packaging film containing pectin, polylactic acids (PLAs) and nisin was developed to inhibit Listeria monocytogenes . The mechanical properties and surface structure of the film were also examined. Cells of L. monocytogenes were reduced by 2.1, 4.5 and 3.7 log units mL⁻¹ by the pectin plus PLA (pectin/PLA) film containing nisin (1000 IU mL⁻¹ of tested liquid) in Brain Heart Infusion (BHI) broth, liquid egg white and orange juice, respectively, after 48 h at 24 °C. Pectin played an important roll in embedding nisin into the film. The pectin/PLA film had a similar stiffness but lower tensile strength, elongation and fracture energy than the pure PLA film. These data suggested that nisin incorporated into the pectin/PLA film was an effective approach to reducing L. monocytogenes in a typical growth medium (e.g. BHI broth) as well as in foods (e.g. orange juice and liquid egg).     

Edible films with anti‐Listeria monocytogenes activity

Edible films based on wheat gluten, gelatin and brea gum were prepared with incorporation of ca. 500 UA cm^?2 of enterocin with anti‐Listeria monocytogenes action, synthesised by Enterococcus faecium CRL1385. The analyses of the different edible films revealed that they did not show any significant changes in their functional and physicochemical features after the enterocin incorporation (P value < 0.05). Gelatin and brea gum films had a higher solubility in water than wheat gluten films. Listeria cell growth were not inhibited by edible matrices per se; while a similar inhibition to that of free enterocin was observed in gelatin films after 2 h and remained unchanged for the duration of the assay. Wheat gluten films showed a lower enterocin–matrix interaction and a limited bactericidal action was observed for 2 h, after which the activity disappeared. In contrast, brea gum was found to interact with the enterocin molecule inhibiting its anti‐Listeria activity. Edible gelatin and wheat gluten films with enterocin can be potentially used to control Listeria monocytogenes contamination in food products.     

Synergistic antimicrobial activity of ε-polylysine,chestnut extract,and cinnamon extract against Staphylococcus aureus

Food Science and Biotechnology - A mixed natural preservative composed of ε-polylysine (ε-PL), chestnut 70% ethanol extract (NE), and cinnamon hydrothermal extract (CW), was investigated...     

Antimicrobial effects of corn zein films impregnated with nisin, lauric acid, and EDTA

Bacterial growth during food transport and storage is a problem that may be addressed with packaging materials that release antimicrobials during food contact. In a series of five experiments, EDTA, lauric acid (LA), nisin, and combinations of the three antimicrobial agents were incorporated into a corn zein film and exposed to broth cultures of Listeria monocytogenes and Salmonella Enteritidis for 48 h (sampled at 2, 4, 8, 12, 24, and 48 h). Four experiments used starting cultures of 10(8) CFU/ml in separate experiments tested against each bacterium; the fifth experiment examined the inhibitory effect of selected antimicrobial agents on Salmonella Enteritidis with an initial inoculum of 10(4) CFU/ml. L. monocytogenes cell numbers decreased by greater than 4 logs after 48 h of exposure to films containing LA and nisin alone. No cells were detected for L. monocytogenes (8-log reduction) after 24-h exposure to any film combination that included LA. Of all film agent combinations tested, none had greater than a 1-log reduction of Salmonella Enteritidis when a 10(8)-CFU/ml broth culture was used. When a 10(4) CFU/ml of Salmonella Enteritidis initial inoculum was used, the films with EDTA and LA and EDTA, LA, and nisin were bacteriostatic. However, there was a 5-log increase in cells exposed to control within 24 h. The results demonstrate bacteriocidal and bacteriostatic activity of films containing antimicrobial agents.     

Antibacterial activity of zinc oxide nanoparticle suspensions on food‐borne pathogens

Nanoparticles (NPs) are increasingly recognised for their utility in biological applications including nanomedicine and food safety. The present study investigated the antibacterial activity of zinc oxide (ZnO) when tested against the Gram‐negative bacteria Escherichia coli as well as the Gram‐positive bacterium Staphylococcus aureus, and the effect was more pronounced with the Gram‐positive than with the Gram‐negative bacteria. ZnO NPs also exhibited a preferential ability to suppress growth of E. coli and S. aureus in milk. This study suggested that the application of ZnO NPs as antibacterial agents in food systems and medicine may be effective at inhibiting certain pathogens.     

Stability, bioavailability, and bacterial toxicity of ZnO and iron-doped ZnO nanoparticles in aquatic media

The stability and bioavailability of nanoparticles is governed by the interfacial properties that nanoparticles acquire when immersed in a particular aquatic media as well as the type of organism or cell under consideration. Herein, high-throughput screening (HTS) was used to elucidate ZnO nanoparticle stability, bioavailability, and antibacterial mechanisms as a function of iron doping level (in the ZnO nanoparticles), aquatic chemistry, and bacterial cell type. ζ-Potential and aggregation state of dispersed ZnO nanoparticles was strongly influenced by iron doping in addition to electrolyte composition and dissolved organic matter; however, bacterial inactivation by ZnO nanoparticles was most significantly influenced by Zn(2+) ions dissolution, cell type, and organic matter. Nanoparticle IC(50) values determined for Bacillus subtilis and Escherichia coli were on the order of 0.3-0.5 and 15-43 mg/L (as Zn(2+)), while the IC(50) for Zn(2+) tolerant Pseudomonas putida was always >500 mg/L. Tannic acid decreased toxicity of ZnO nanoparticles more than humic, fulvic, and alginic acid, because it complexed the most free Zn(2+) ions, thereby reducing their bioavailability. These results underscore the complexities and challenges regulators face in assessing potential environmental impacts of nanotechnology; however, the high-throughput and combinatorial methods employed promise to rapidly expand the knowledge base needed to develop an appropriate risk assessment framework.     

Physical,antimicrobial and antioxidant properties of starch‐based film containing ethanolic propolis extract

Propolis is a natural product that meets the requirements as functional additive for food packaging due to its antioxidant and antimicrobial activities. In this work, ethanolic propolis extract (EPE) was incorporated in cassava starch films, and characterisations with respect to their microstructure, mechanical properties, water vapour permeability (WVP), moisture sorption kinetics as well as antimicrobial and antioxidant capacities were performed. The results showed that tensile strength was not affected (P > 0.05) by the presence of EPE but Young's modulus decreased about 50% when compared to control films possibly because of EPE plasticiser effect. When 1% EPE was used, changes in moisture sorption properties were detected by a slightly hydrophobic character at films WVP. When extracted from the films, propolis retained its antioxidant activity. The films exhibited antimicrobial activity against Staphylococcus aureus and Escherichia coli even at low EPE concentrations (0.5%) mainly due to its phenolic compounds.     

Antimicrobial activity of biodegradable polysaccharide and protein-based films containing active agents

Significant interest has emerged in the introduction of food packaging materials manufactured from biodegradable polymers that have the potential to reduce the environmental impacts associated with conventional packaging materials. Current technologies in active packaging enable effective antimicrobial (AM) packaging films to be prepared from biodegradable materials that have been modified and/or blended with different compatible materials and/or plasticisers. A wide range of AM films prepared from modified biodegradable materials have the potential to be used for packaging of various food products. This review examines biodegradable polymers derived from polysaccharides and protein-based materials for their potential use in packaging systems designed for the protection of food products from microbial contamination. A comprehensive table that systematically analyses and categorizes much of the current literature in this area is included in the review.