Phase conversion and spectral properties of long lasting phosphor Zn<Subscript>3</Subscript> (PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Mn<Superscript>2+</Superscript>, Ga<Superscript>3+</Superscript>

A red long lasting phosphor Zn₃(PO₄)₂:Mn²⁺,Ga³⁺ (ZPMG) was prepared by ceramic method, and phase conversion and spectral properties were investigated. Results indicated that the phase conversion from α-Zn₃(PO₄)₂, β-Zn₃(PO₄)₂ toγ-Zn₃(PO₄)₂ occurs with different manganese concentration incorporated and sinter process. The structural change induced by the phase transformation results in a remarkable difference in the spectral properties. The possible luminescence mechanism for this red LLP with different forms has been illustrated.     

Effect of Pr<Superscript>3+</Superscript> on the stokes luminescence of YPO<Subscript>4</Subscript>:Nd<Superscript>3+</Superscript> under IR excitation

We have identified general relationships between the spectral and kinetic properties of the IR Stokes luminescence bands of Y_{1 − x − y} Nd _x Pr _y PO₄ solid solutions in the spectral range 0.86–1.40 μm under 0.810-μm laser excitation. The results have been used to formulate technical requirements for the purity of rare-earth oxides for the fabrication of efficient YPO₄:Nd³⁺ IR phosphors and to develop a fast YPO₄:Nd³⁺, Pr³⁺ IR phosphor that allows the decay time of the Nd³⁺ IR Stokes luminescence bands in the range 0.86–1.40 μm to be tuned from 50 to 170 μs by varying the ratio of the Nd³⁺ and Pr³⁺ concentrations.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

Superprotonic CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript>-CsHSO<Subscript>4</Subscript> solid solutions

We have performed partial HSO₄⁻ substitution in CsH₂PO₄ and studied the associated structural changes and the proton conductivity of the resultant (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions in the range x = 0.01–0.3. The results indicate that, at room temperature, the solid solutions are disordered. In the range x = 0.01–0.1, they are isostructural with the low-temperature phase of CsH₂PO₄ (sp. gr. P2₁/m), and their unit-cell parameters increase with x, whereas in the range x = 0.15–0.3 the solid solutions are isostructural with the high-temperature, cubic phase of CsH₂PO₄ (Pm3m), and their unit-cell parameter decreases. The conductivity of the (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions with x ≤ 0.3 depends significantly on their composition and increases at low temperatures by up to four orders of magnitude, approaching that of the superionic phase of CsH₂PO₄ in the range x = 0.15–0.3 because of the hydrogen bond weakening and increased proton mobility. The conductivity of the superionic phase decreases with increasing x by no more than a factor of 1.5–2, and the superionic phase transition, which occurs at 231°C in CsH₂PO₄, shifts to lower temperatures and disappears for x ≥ 0.15. The activation energy for low-temperature conduction decreases with increasing x: from 0.9 eV in CsH₂PO₄ to 0.48 eV at x = 0.1.     

Luminescence of Ce<Superscript>3+</Superscript> ion doped in SrZn<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphor under excitation of vacuum ultraviolet

Ce³⁺ doped SrZn₂(PO₄)₂ was prepared by high temperature solid-state reaction. The phosphor was investigated by X-ray powder diffraction, scanning electron microscope, and FT-IR measurements. Spectroscopic properties of the phosphor were characterized by vacuum ultraviolet spectroscopy. According to the excitation spectrum, the five 5d levels corresponding to the 4f ¹ → 4f ⁰5d ¹ transitions of Ce³⁺ ions were clearly identified. The observed excitation bands in the VUV region are due to the PO₄³⁻ anion groups of the host, in which energy transfer to Ce³⁺ ions is rather efficient. The emission bands corresponding to the 4f ¹ → 4f ⁰5d ¹ transitions of Ce³⁺ ions were analyzed. The barycenter of Ce³⁺ ions, host absorption bands, crystal field splitting, emission wavelength and Stokes shift were calculated and discussed.     

Ce and Eu activated Na<Subscript>2</Subscript>Zn<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>4</Subscript>, a new promising novel phosphor

A new efficient phosphor, Eu²⁺/Eu³⁺ and Ce³⁺ activated Na₂Zn₅(PO₄)₄ has been synthesized by solid-state reaction technique at high temperature. X-ray powder diffraction analysis confirmed the formation of Na₂Zn₅(PO₄)₄ host lattice. Scanning electron microscopy indicated that the microstructure of the phosphor consisted of irregular fine grains with a size of about 0·5–2 μm. Photoluminescence excitation spectrum measurements of Ce³⁺ activated Na₂Zn₅(PO₄)₄ show that the phosphor can be efficiently excited by UV-Vis light from 280 to 310 nm to realize emission in the visible (blue) range due to the 5d-4f transition of Ce³⁺ ions which is applicable for scintillation purpose, whereas Eu²⁺/Eu³⁺ activated Na₂Zn₅(PO₄)₄ phosphor emits blue, green and red emission spectrum shows at 487 nm, 546 nm with a dominant peak at 611 nm respectively, due to Eu²⁺/Eu³⁺ ions which is promising candidate for solid state lighting. Therefore, newly synthesised, by low cost and easy technique prepared, novel phosphors may be useful as RGB phosphor for solid state lighting application.     

Thermodynamic properties of NaZr<Subscript>2</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The heat capacity C _p ⁰ of crystalline NaZr₂(AsO₄)₃ has been measured in the range 7–650 K using precision adiabatic calorimetry and differential scanning calorimetry. The experimental data have been used to calculate the standard thermodynamic functions of the arsenate: C _p ⁰, enthalpy H ⁰(T) − H ⁰(0), entropy S ⁰(T), and Gibbs function G ⁰(T) − H ⁰(0) from T → 0 to 650 K. The standard entropy of its formation from elements is Δ_f S ⁰(NaZr₂(AsO₄)₃, cr, 298.15 K) = −1087 ± 1 J/(mol K).     

Synthesis and luminescence properties of Eu<Superscript>2+</Superscript>-doped Li<Subscript>2</Subscript>SrSiO<Subscript>4</Subscript>

We have studied the luminescence spectra of Li₂Sr_{1 − x} Eu _x SiO₄ (x = 0.0001–0.01) solid solutions prepared by solid-state reactions and a sol-gel process in a reducing atmosphere. The spectra show a broad band in the range 500–700 nm, centered at 578 nm, which is due to the 4f ⁶5d → 4f ⁷ transition. The luminescence excitation spectrum shows, in addition to bands due to Eu²⁺ 4f ⁷ → 4f ⁶5d transitions, a strong band centered at 174 nm, attributable to absorption in the SiO₄⁴⁻ group.     

Luminescence properties and energy transfer of co-doped Ba<Subscript>3</Subscript>GdNa(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F:Ce<Superscript>3+</Superscript>,Tb<Superscript>3+</Superscript> green-emitting phosphors

Phase pure Ce³⁺ and Tb³⁺ singly doped and Ce³⁺/Tb³⁺ co-doped Ba₃GdNa(PO₄)₃F samples have been synthesized via the high temperature solid-state reaction. The crystal structures, photoluminescence properties, fluorescence lifetimes, thermal properties and energy transfer of Ba₃GdNa(PO₄)₃F:Ce³⁺,Tb³⁺ were systematically investigated. Rietveld structure refinement indicates that Ba₃GdNa(PO₄)₃F crystallizes in a hexagonal crystal system with the space group P-6. For the co-doped Ba₃GdNa(PO₄)₃F:Ce³⁺,Tb³⁺ samples, the emission color can be tuned from blue to green by varying the doping concentration of the Tb³⁺ ions. The intense green emission was realized in the Ba₃GdNa(PO₄)₃F:Ce³⁺,Tb³⁺ phosphors on the basis of the highly efficient energy transfer from Ce³⁺ to Tb³⁺. Also the energy transfer mechanism has been confirmed to be quadrupole–quadrupole interaction, which can be validated via the agreement of critical distances obtained from the concentration quenching (13.84 Å). These results show that the developed phosphors may possess potential applications in near-ultraviolet pumped white light-emitting diodes.     

Spectroscopic studies of TeO<Subscript>2</Subscript>–ZnO–Er<Subscript>2</Subscript>O<Subscript>3</Subscript> glass system

Series of glass based on the (80 − x)TeO₂–20ZnO–(x)Er₂O₃ system (0.5 mol% ≤ x ≤ 2.5 mol%) has successfully been made by melt quenching technique. The optical properties of glass have been investigated by means of IR and Raman spectroscopy. It is observed that as the Er₂O₃ content is being increased, the sharp IR absorption peaks are consistently shifted from 650 to 672 cm⁻¹ while the Raman shift intensity around 640–670 cm⁻¹ is decreases but increases around 720–740 cm⁻¹. It is found out that both phenomenons are related to the structural changes between the stretching vibration mode of TeO₄ tbp and TeO₃ tp, and bending vibration mode of Te–O bonds in the glass linkages.     

Synthesis and photoluminescence study of narrow-band UVB-emitting LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>:Gd<Superscript>3+</Superscript>, Pr<Superscript>3+</Superscript> phosphor

A series of Pr³⁺, Gd³⁺ and Pr³⁺–Gd³⁺-doped inorganic borate phosphors LiSr₄(BO₃)₃ were successfully synthesized by a modified solid-state diffusion method. The crystal structures and the phase purities of samples were characterized by powder X-ray diffraction. Surface morphology of the sample was studied by scanning electronic microscopy (SEM). The optimal concentrations of dopant Gd³⁺ ions in compound LiSr₄(BO₃)₃ were determined through the measurements of photoluminescence (PL) spectra of phosphors. Gd³⁺-doped phosphors LiSr₄(BO₃)₃ show strong band absorption in UV spectral region and narrow-band UVB emission under the excitation of 276 nm was only due to ⁶P _J → ⁸S_7/2 transition of Gd³⁺ ions. The effect of Pr³⁺ ion on excitation of LiSr₄(BO₃)₃:Gd³⁺ was also studied. The excitation of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ gives a broad-band spectra, which show very good overlap with the Hg 253.7 nm line. The photoluminescence spectra of LiSr₄(BO₃)₃ with different doping concentrations Pr³⁺ and keeping the concentration of Gd³⁺ constant at 0.03 mol have also been studied. The emission intensity of LiSr₄(BO₃)₃:Pr³⁺–Gd³⁺ phosphors increases with increasing Pr³⁺ doping concentration and reaches a maximum at 0.01 mol. From the photoluminescence study of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ we conclude that there was efficient energy transfer from Pr³⁺→ Gd³⁺ ions in LiSr_4?x?y Pr _x Gd _y (BO₃)₃ phosphors.     

Electrical properties of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaO-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses exhibiting majority charge carrier reversal

The thermoelectric power and d.c electrical conductivity of x V₂O₅⋅40CaO⋅(60−x)P₂O₅ (10 ≤ x ≤ 30) glasses were measured. The Seebeck coefficient (Q) varied from +88 μ V K⁻¹ to −93 μV K⁻¹ as a function of V₂O₅ mol%. Glasses with 10 and 15 mol% V₂O₅ exhibited p-type conduction and glasses with 25 and 30 mol% V₂O₅ exhibited n-type conduction. The majority charge carrier reversal occurred at x = 20 mol% V₂O₅. The variation of Q was interpreted in terms of the variation in vanadium ion ratio (V^{5 +}/V^{4 +}). d.c electrical conduction in x V₂O₅⋅40CaO⋅(60−x)P₂O₅ (10 ≤ x ≤ 30) glasses was studied in the temperature range of 150 to 480 K. All the glass compositions exhibited a cross over from small polaron hopping (SPH) to variable range hopping (VRH) conduction mechanism. Mott parameter analysis of the low temperature data gave values for the density of states at Fermi level N (E_F) between 1.7 × 10²⁶ and 3.9 × 10²⁶ m⁻³ eV⁻¹ at 230 K and hopping distance for VRH (R_VRH) between 3.8 × 10⁻⁹m to 3.4 × 10⁻⁹ m. The disorder energy was found to vary between 0.02 and 0.03 eV. N (E_F) and R_VRH exhibit an interesting composition dependence.     

Sr<Subscript>3</Subscript>GdLi(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F: Sm<Superscript>3+</Superscript> phosphor: preparation and luminescence properties evaluation

A series of Sr₃Gd_1?xLi(PO₄)₃F: xSm³⁺ (x?=?0.02, 0.04, 0.06, 0.08) phosphors were synthesized by a high-temperature solid state method. The Sm³⁺ activated Sr₃GdLi(PO₄)₃F phosphors can be efficiently excited by the wavelengths in the range from 350 to 450 nm, which matches perfectly with that of the commercial near-UV LED chips. The optimal doping concentration of Sr₃Gd_1?xLi(PO₄)₃F: xSm³⁺ phosphors was determined to be x?=?0.04, corresponding to the quantum efficiency of 2.23%, and the CIE chromaticity coordinates (x?=?0.5172, y?=?0.4641). The concentration quenching mechanism of Sm³⁺ in Sr₃GdLi(PO₄)₃F host is mainly attributed to the dipole–dipole interaction, which was confirmed by the fluorescent lifetimes. The effect of temperature on the photoluminescence property of Sr₃GdLi(PO₄)₃F: Sm³⁺ was investigated. 90% of the intensity is preserved at 150 °C. In addition, a white light emitting diode (WLED) lamp was fabricated by a 405 nm n-UV LED chip coated with Sr₃Gd_0.96Li(PO₄)₃F:0.04Sm³⁺ phosphor and commercial yellow phosphor (YAG: Ce³⁺) of a certain mass ratio. The present work indicates that the Sr₃GdLi(PO₄)₃F: Sm³⁺ orange–red-emitting phosphors tend to be potential application in n-UV WLED.     

Effect of combined doping (y<Superscript>3 +</Superscript> + fe<Superscript>3 +</Superscript>) on structural features of nanodispersed zirconium oxide

Fully stabilized zirconium dioxide is widely used. One of the basic requirements to this material is the thermal stability of the structure. The most effective stabilizer for zirconium oxide is yttrium oxide. However, the structure of Y-ZrO₂ degraded at low temperature. Partial substitution of Fe^{3 +} for Y³⁺ decreases both the crystallization and sintering temperature of zirconia ceramic. The aim of present work is the investigation of structural peculiarities of zirconium oxide stabilized by combined dopant depending on chemical composition, synthesis conditions and heat treatment. The polymorphic composition of a ZrO₂-based materials has been determined in series of samples that correspond to the formula [1−(x+y)]ZrO₂⋅xY₂O₃⋅yFe₂O₃ in the temperature range 620–1570 K. It has been found that at the same molar ratio ZrO₂ : doping oxides, the degree of ZrO₂ stabilization increases, and the low-temperature degradation process is retarded by the partial substitution of Fe^{3 +} for Y³⁺. Nonequivalent sites of Fe^{3 +} ions have been identified: two with octahedral coordination for CPH and three with octa-, penta- and tetrahedral coordination for SPH. The possibility of cluster distribution of Fe³⁺ ions and the dependence of the number of vacancies on synthesis conditions have been shown.     

Unusual magnetic and transport properties of the CMR Pr<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3−<Emphasis Type="Italic">y</Emphasis></Subscript> system

The substituted nonstoichiometric perovskite Pr_1−x Ca _x MnO_3−y compounds have been synthesized by a standard combustion technique, which show uniphase solid solutions. The all samples of the Pr_1−x Ca _x MnO_3−y system show an orthorhombic crystal system and the cell volumes are decreased with increasing the larger amounts of substituted atoms or the increasing x values. The mixed valence of Mn ions is identified by the XAS (XANES/EXAFS) spectroscopy and the amounts of Mn⁴⁺ ions are determined by an iodometric titration method. Nonstoichiometric chemical formulas of the Pr_1−x Ca _x Mn_1−τ³⁺Mn_τ⁴⁺O_3−y compounds have been obviously formulated. Magnetic properties are investigated by SQUID and thus the Pr_1−x Ca _x MnO_3−y (x = 0.4, 0.6, and 0.8) compounds show the transition from antiferromagnetic state to paramagnetic state. The Pr_1−x Ca _x MnO_3−y (x = 0.0, 0.2, and 1.0) compounds show the transition from ferromagnetic state to paramagnetic state. The facts that Mn⁴⁺ contents play important roles in the magnetic ordering have been found out. The transport properties have been studied by the DC electrical conductivity measurement under magnetic fields of 0 G and 3 kG. Maximum and minimum MR ratios are 1016% of the Pr_0.6Ca_0.4MnO_2.846, and −77.5% of the PrMnO_3.021 compound, respectively.     

Synthesis and photoluminescence properties of LiEu(W,Mo)<Subscript>2</Subscript>O<Subscript>8</Subscript>:Bi<Superscript>3+</Superscript> red-emitting phosphor for white-LEDs

LiEu_1−x (W_2−y Mo _y )O₈:xBi³⁺ series red-emitting phosphors were synthesized by solid state reaction. The structure, morphology, and photoluminescent properties of phosphors were studied by X-ray powder diffraction, scanning electron microscopy, and photoluminescence spectrum, respectively. X-ray powder diffraction analysis showed that the as-obtained phosphors belong to the scheelite structure. The average particle size of the investigated phosphor was about 8 μm. The excitation spectrum exhibits a charge-transfer broad band along with some sharp peaks from the typical 4f–4f transitions of Eu³⁺. Under excitation of UV, near-UV, or blue light, these phosphors showed strong red emission at 615 nm due to ⁵D₀–⁷F₂ transition of Eu³⁺. The incorporation of Mo⁶⁺ into LiEuW₂O₈:Bi³⁺ could induce red-shift of the charge-transfer broad band and a remarkable increase of photoluminescence. The highest red-emission intensity was observed with LiEu_0.80Mo₂O₈:0.20Bi³⁺. Compared with the commercial red-emitting phosphor, Y₂O₂S:Eu³⁺, the emission intensity of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor is much stronger than that of Y₂O₂S:Eu³⁺ and its chromaticity coordinates are closer to the standard values than that of the commercial phosphor. The optical properties of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor make it attractive for the application in white-light-emitting diodes (LEDs), in particular for near-UV InGaN-based white-LEDs.     

Electrical Conductivity and Electrochemical Characteristics of Na<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Based NASICON-Type Materials

NASICON-type materials with the compositions Na₃V_2–xAl_x(PO₄)₃, Na₃V_{2 - x}Fe_x(PO₄)₃, Na_{3 + x}V_2–xNi_x(PO₄)₃, and Na₃V_{2 - x}Cr_x(PO₄)₃ (x = 0, 0.03, 0.05, and 0.1) have been prepared and characterized by X-ray diffraction analysis, electron microscopy, and impedance spectroscopy. The results demonstrate that the highest electrical conductivity among the samples studied is offered by the material doped with 5% Fe: Na₃V_1.9Fe_0.1(PO₄)₃. The activation energy for low-temperature conduction in the doped materials decreases from 84 ± 2 to 54 ± 1 kJ/mol and that for high-temperature conduction is ~33 kJ/mol. The discharge capacity of Na₃V_1.9Fe_0.1(PO₄)₃/C under typical working conditions of cathodes of sodium ion batteries has been shown to exceed that of Na₃V₂(PO₄)₃/C. The capacity of the more porous material prepared by the Pechini process (Na₃V_1.9Fe_0.1(PO₄)₃/C-{II}) approaches the theoretical one at a low charge–discharge rate and retains its high level as the charge rate is raised (its discharge capacity was 117.6, 108.8, and 82.6 mAh/g at a discharge rate of 0.1C, 2C, and 8C, respectively).     

Emission analysis of Pr<Superscript>3+</Superscript> &; Ho<Superscript>3+</Superscript>: Ca<Subscript>4</Subscript>GdO(BO<Subscript>3</Subscript>)<Subscript>3</Subscript> powder phosphors

Emission spectral results of Pr³⁺ & Ho³⁺ ions doped Ca₄GdO(BO₃)₃ powder phosphors are reported here. XRD, SEM and FTIR measurements have been carried out for them. The emission spectrum of Pr³⁺: Ca₄GdO(BO₃)₃ has shown an emission transition ¹D₂ → ³H₄ at 606 nm with λ_exci = 480 nm (³H₄ → ³P₀) and Ho³⁺: Ca₄GdO(BO₃)₃ phosphor has shown an emission transition ⁵S₂ → ⁵I₈ at 549 nm with λ_exci = 447 nm (⁵I₈ → ⁵F₁). Emission performances of these two phosphors have been explained in terms of energy level diagrams.     

Electrical conduction properties of Sr-doped Bi<Subscript>4</Subscript>(SiO<Subscript>4</Subscript>)<Subscript>3</Subscript> with the eulytite-type structure

Electrical conduction in 1 mol% Sr-doped Bi₄(SiO₄)₃ with the eulytite-type structure at elevated temperatures was investigated with conductivity measurements. Conductivity of the material under wet condition was higher than that under dry condition, and were 1.2 × 10⁻⁶ – 9.7 × 10⁻⁵ S cm⁻¹ at 500–850 ^°C. From H/D isotope effects and p(O₂)-dependencies of the conductivity, it was found that the Sr-doped Bi₄(SiO₄)₃ exhibited protonic conduction at all the temperatures investigated while contribution of p-type conduction became significant with increasing p(O₂) and/or temperature. Protonic and p-type conductions in the material were discussed in terms of defect equilibria.     

Mn-doped Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> nanocrystal with enhanced electrochemical properties based on aerosol synthesis method

Mn-doped Li₃V_2?x Mn _x (PO₄)₃ nanocrystals with enhanced electrochemical properties for lithium-ion batteries were synthesized by aerosol process successfully. The nanocrystals synthesized from aerosol-assisted spray process have an average particle size smaller than 500 nm, with some initial particle size of about 100 nm. The Mn-doped Li₃V₂(PO₄)₃ cathode materials show higher capacity and coulombic efficiency than pure Li₃V₂(PO₄)₃ materials. Especially, the Mn-doped Li₃V_1.94Mn_0.06(PO₄)₃ shows a capacity of 130 mAh/g in the voltage range of 3.0–4.4 V and a coulombic efficiency of 99.5 % at 1C. The results from XRD, SEM, HRTEM, and EIS suggested that lattice changes of Li₃V₂(PO₄)₃ due to Mn doping and the fine particles enabled by aerosol-assisted spray process can significantly reduce the charge-transfer resistance and improve the apparent Li⁺ diffusion coefficient of insertion/desertion in the electrodes, which were the critical reason of better electrochemical performance of Mn-doped Li₃V₂(PO₄)₃ cathode materials.