钛的电阻钎焊技术研究

研究了Ｔｉ－２４Ａｌ－１１Ｎｂ－２Ｓｉ和Ｔｉ－２４Ａｌ－１１Ｎｂ－５Ｓｉ金属间化合物合金的热轧组织与性能,结果发现：随着变形量的增加,两种合金第二相Ｔｉ５Ｓｉ３变得细小且趋向于均匀分布。变形量越大,合金的室温四点弯曲程度越大,含Ｔｉ５Ｓｉ３较多的Ｔｉ－２４Ａｌ－１１Ｎｂ－５Ｓｉ合金的弯曲强度较高。两种合金的室温弯曲断口形貌均为准解理形式,两相界面结合较强。高温拉伸试验表明：随变形量的增大,Ｔｉ－２４Ａｌ－１１Ｎｂ－２Ｓｉ合金的拉伸强度和塑性都增加。Ｔｉ－２４Ａｌ－１１Ｎｂ－５Ｓｉ合金由于变形量较大和较高的强化相体积含量,拉伸强度明显较Ｔｉ－２４Ａｌ－１１Ｎｂ－２Ｓｉ合金的为高,但塑性却大为降低     

ZL101A合金熔炼新工艺

ＺＬ１０１Ａ合金熔炼新工艺山东平阴铝厂谷兰成表１新工艺与传统工艺比较工艺类别原料投料顺序精炼处理新工艺０．１０～０．２０％Ａｌ－Ｔｉ合金锭（电解）结晶硅（Ｓｉ－１）金属镁（Ｍｇ－１）Ａｌ－Ｔｉ→Ｓｉ→Ａｌ－Ｔｉ→ＭｇＣＣｌ４０．５ｋｇ／ｔＡｌ７２０...     

Al-Ti-B-Sr对Al-Si-Mg合金的变质细化作用

用快速凝固和热变形处理的Ａｌ－Ｔｉ－Ｂ－Ｓｒ中间合金,对Ａｌ－Ｓｉ－Ｍｇ铝轮毂材料进行处理,试验结果表明：Ａｌ－Ｔｉ－Ｂ－Ｓｒ中间合金可以对Ａａ－７Ｓｉ－０．３５Ｍｇ合金有效地细化与变质;改善Ａｌ－Ｔｉ－Ｂ－Ｓｒ的细化与变质效果,Ａｌ－Ｓｉ－Ｍｇ合金的抗拉强度和延伸率较Ａｌ－Ｔｉ－Ｂ、Ａｌ－Ｓｒ两种中间俣金分别外入时提高了约１０％和２５％。     

Al—12%Si合金α—Al晶粒细化剂的研究

研究了Ａｌ－５Ｔｉ－１Ｂ和Ａｌ－３Ｂ中间合金对铸造铝合金Ａｌ－１２％Ｓｉ的α－Ａｌ晶粒的细化效果。结果表明，Ａｌ－３Ｂ中间合金的细化能力和抗延时衰减性能皆优于Ａｌ－５Ｔｉ－１Ｂ中间合金。分析认为，ＡｌＢ２和ＴｉＢ２相质点均为铸造Ａｌ－Ｓｉ合金中α－Ａｌ潜在的结晶核心，而Ａｌ３Ｔｉ相易被Ｓｉ原子毒化，失去作为结晶核心的作用。     

Al-Si-Ti合金除铁工艺研究

通过对富铁的Ａｌ－Ｓｉ－Ｔｉ合金液进行自然沉降和添加锰元素再自然沉降后的组织观察和分析表明：自然沉降前后Ａｌ－Ｓｉ－Ｔｉ合金中铁相含量几乎无变化,而经加锰再自然沉降后则可去除大部分Ａｌ－Ｓｉ－Ｔｉ合金中的铁相     

铸造Al—Si合金熔体处理——晶粒细化

对亚共晶Ａｌ－Ｓｉ铸造合金进行细化处理已成为一种基本操作,中间合金（Ａｌ－Ｔｉ,Ａｌ－Ｔｉ－Ｂ和Ａｌ－Ｂ合金）在亚共晶Ａｌ－Ｓｉ铸造合金中与在工业纯铝和变形铝合金中的晶粒细化行为存在较大的差异,Ａｌ－３Ｔｉ－３Ｂ,Ａｌ－３Ｂ中间合金在Ａｌ－Ｓｉ铸造合金中表现出优异的晶粒细胞化效应,Ｓｉ与晶粒细化剂的交互作用在其中扮演着重要的角色,通过炉前对熔体进行快速热分析可愉对晶粒细化效果和变质程度进行评价和预     

铸造Al-Si合金熔体处理——晶粒细化

对亚共晶Ａｌ－Ｓｉ铸造合金进行细化处理已成为一种基本操作。中间合金（Ａｌ－Ｔｉ,Ａｌ－Ｔｉ－Ｂ和Ａｌ－Ｂ合金）在亚共晶Ａｌ－Ｓｉ铸造合金中与在工业纯铝和变形铝合金中的晶粒细化行为存在较大的差异。Ａｌ－３Ｔｉ－３Ｂ,Ａｌ－３Ｂ中间合金在Ａｌ－Ｓｉ铸造合金中表现出优异的晶粒细化效应,Ｓｉ与晶粒细化剂的交互作用在其中扮演着重要的角色。通过炉前对熔体进行快速热分析可以对晶粒细化效果和变质程度进行评价和预测,继而控制熔体处理的质量。对于亚共晶Ａｌ－Ｓｉ铸造合金,归纳起来有四种晶粒细化机理：包晶反应理论、共晶反应理论、硼化物颗粒理论和超形核理论。仅对Ａｌ－Ｓｉ铸造合金细化处理的最新进展、Ｓｉ与晶粒细化剂的交互作用和晶粒细化机理进行综合评述     

电解法直接制取Al－Si－Ti合金工业试验

论述了在６０ｋＡ铝电解槽中直接制取Ａｌ－Ｓｉ－Ｔｉ合金的工业试验过程和试验条件，对试验结果以及试验过程的工艺制度和最佳选择范围作了详细分析，并对试验制取的Ａｌ－Ｓｉ－Ｔｉ合金的应用效果作了介绍。     

SiC陶瓷与TiAl合金的真空钎焊

采用Ａｇ－Ｃｕ－Ｔｉ钎料对常压烧结的ＳｉＣ陶瓷与ＴｉＡｌ金属间化合物进行了真空钎焊,并对接头的微观组织和室温强度进行了研究。结果表明,利用Ａｇ－Ｃｕ－Ｔｉ钎料可以实现ＳｉＣ与ＴｉＡｌ的连接;接头界面具有明显的层状结构,即由Ｔｉ－Ｓｉ合金层、富Ｃｕ相与富Ａｇ相的双相层和Ｔｉ－Ａｌ－Ｃｕ合金层组成;在１１７３Ｋ和１０ｍｉｎ的钎焊条件下,接头室温剪切强度达互１７３ＭＰａ。     

电解法直接制取Al—Si—Ti合金工业试验研究

论述了在６０ｋＡ铝电解槽中直接制取Ａｌ－Ｓｉ－Ｔｉ合金的工业试验过程，对试验方法和试验条件进行了全面介绍，对试验结果以及试验过程的工艺技术制度的最佳选择范围作了详细分析，并对试验制取的Ａｌ－Ｓｉ－Ｔｉ合金的应用效果作了介绍。     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

Thermodynamics Study on the Decomposition of Chromite with KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

Influence of Heat Treatment on Damping Behaviour of the Magnesium Wrought Alloy AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.     

电化学噪声数据处理方法概述

综述了常见的电化学噪声数据处理方法,介绍了直流趋势剔除、统计分析、快速傅立叶变换(FFT)法计算功率谱密度(PSD)以及小波变换处理电化学噪声信号的基本过程,并阐释了各种数学处理及所得参数的物理意义。