Daily intake of aluminium by adult population of Mumbai,India

Electrothermal atomic absorption spectrophotometry (ET-AAS) has been used for the determination of Al in environmental and food samples with a detection limit of 0.3 ng ml(-1). The reliability of estimation is assessed through the analysis of Standard Reference Materials (IAEA SRMs) of Soil-7, SL-3, SD-M2/TM and Hay (V-10). The results indicate that the average concentration of aluminium in air particulate samples is 5.3 microg m(-3). The daily intake of Al by the adult population of Mumbai is 6.4 mg day(-1).     

Daily intake of manganese by the adult population of Mumbai

The daily intake of manganese (Mn) estimated through air, water and duplicate dietary analysis is found to range from 0.67 to 4.99 mg with a mean value of 2.21 mg. Ingestion through food contributed to the predominant fraction of the intake. The turnover rate of Mn through blood is approximately 2 h, based on the mean concentration of Mn in blood of 1.54 microg l(-1). The average concentrations of Mn in water and air were approximately 1.42 microg l(-1) and 37 ng m(-3), respectively. The daily intake of Mn by the adult population of Mumbai is closer to the lower bound of the recommended limit of 2-5 mg. Electro Thermal Atomic Absorption Spectrophotometry (ET-AAS), has been used for the determination of Mn in a variety of environmental and human biological fluids. The detection limit of Mn for a volume injection of 20 microl is 2 pg absolute. The precision of the method is established by analyzing a synthetic mixture containing various elements in different quantities (0.5-10 ppm) and is found to be within +/- 8%. The reliability of estimation is further assessed through the analysis of Standard Reference Materials (SRMs) of soil, hay, milk powder and fish tissue obtained from IAEA.     

Dietary intake of metals by Mumbai adult population

Daily intake of 12 metals (Na, K, Ca, Cu, Zn, Fe, Mn, Mg, Pb, Cd, Co and Ni) by Mumbai adult population were assessed by analysing duplicate diet samples. These metals were determined by flame atomic absorption spectrophotometry (AAS) and stripping voltammetric techniques. A total of 250 diet samples containing 170 vegetarian diet and 80 non-vegetarian diet collected during April 2003 to March 2004 were analysed during this study. Daily dietary intakes of 2.4 g Na and 1.2 g K were observed for Mumbai adults. Daily dietary intakes of Ca, Cu, Zn, Fe, Mn and Mg were 367, 1.0, 6.3, 6.7, 2.0 and 304 mg, respectively. Pb, Cd, Co and Ni intakes by Mumbai adults were 32.3, 2.2, 2.2 and 108 microg/day, respectively. From this study it has been observed that the intake of toxic metals such as Pb, Cd and Ni is much lower than the tolerable daily intake derived from PTWI given by FAO/WHO and could not be considered harmful in this group of subjects. Daily intake of the studied 12 metals was found to be higher in non-vegetarian diet compared to the vegetarian diet (P<0.02, 0.01).     

Selenium levels in biological matrices in adult population of Mumbai, India

Selenium (Se) levels in whole blood, serum, urine, muscle and saliva of Mumbai adults have been estimated by differential pulse cathodic stripping voltammetry (DPCSV); the detection limit of Se is 0.05 ng ml(-1). The reliability of estimation is further assessed through the analysis of Standard Reference Materials. The Se levels in whole blood (n = 35) and blood serum (n = 201) of the Mumbai adult population is 99.6 and 100 ng ml(-1); approximately 34.8% of the population have serum Se levels between 80 and 100 ng ml(-1). The blood serum levels of Se for Mumbai adults are comparable to those of whole blood. The mean concentration of Se in urine on a 24-h basis is 5.2 ng ml(-1). Muscle and saliva of the Mumbai adult population contain 195.4 ng g(-1) and 2 ng ml(-1) of Se, respectively. A good correlation between serum Se and dietary Se is observed with a correlation coefficient of 0.89.     

Daily intake of manganese by local population around Kylleng Pyndengsohiong Mawthabah (Domiasiat), Meghalaya in India

Present work is carried out adjacent to world's highest rainfall area Kylleng Pyndengsohiong (KP) Mawthabah (Domiasiat), Meghalaya in India to establish the baseline value of manganese intake through dietary route by the local tribe population in view of proposed uranium mining. The locally available food items collected from villages surrounding the proposed uranium mining site at KP Mawthabah (Domiasiat) were analysed using Energy Dispersive X-Ray Fluorescence (EDXRF) Technique. The manganese concentration in different food categories varies from 2.76-12.50 mg kg^− 1 in cereals, 1.8-4.20 mg kg^− 1 in leafy vegetables, 0.30-13.50 mg kg^− 1 in non leafy vegetables, 0.50-15.30 mg kg^− 1 in roots and tubers, 0.70-1.50 mg kg^− 1 in fruits and 0.12-0.96 mg kg^− 1 in flesh food. The mean dietary intake of Mn was found to be 3.83 ± 0.25 mg d^− 1 compared to Recommended Dietary Allowances (RDAs) of 2-5 mg d^− 1. The daily intake of Manganese by the local tribe population is comparable with the value (3.7 mg d^− 1) recommended by International Commission on Radiological Protection (ICRP) for reference man and lower than the intake value observed for Indian and other Asian population.     

Precipitation scavenging of polycyclic aromatic hydrocarbons in Mumbai, India

The concurrent rain and air sampling was conducted for thirteen rain events between the last week of May and end of June 2001. Concentration of total PAHs varied from 84.25 to 777.49 ng/l whereas that in air was in the range of 4.05 to 34.42 ng/m(3). In rainwater the lower molecular weight PAHs (e.g. Phenanthrene, Fluoranthene and Pyrene) were found to be more prominent than the higher molecular weight compounds. The gas phase scavenging ratio (Wg) was found to increase with the molecular weight of the compound. The particle phase scavenging ratio (Wp) values for the more volatile PAHs were generally much higher than those for less volatile PAHs. The higher MW PAHs have Wg values equal to or larger than their Wp values.     

Volatile organic compounds in indoor environments in Mumbai, India

Air samples, representing different types of indoor environments, were collected and analyzed for eight hydrocarbons namely, n-hexane, benzene, heptane, toluene, p- and o-xylene, ethyl benzene and n-decane using a cryogenic preconcentration system and a gas chromatograph with a flame-ionization detector. Simultaneous outdoor samples were also collected to determine indoor to outdoor (I/O) ratios for every compound at each location. In all, seven different types of indoor environments were investigated for VOC levels. Toluene concentration levels were found to be high in a hall which was recently renovated. The indoor environment of a kitchen in which a kerosene stove was used and smoker's rooms showed high levels of benzene. The concentrations of VOCs during painting were found to be high and the levels of VOCs depended on the type of paint used. The study revealed that the indoor concentrations of selected VOCs on occasions could be significantly high due to various sources. The data presented here can be useful in developing air quality standards for indoor air.     

Study of bio-aerosols in a prominent temple in Mumbai City,India

Numerous health complaints occur with respect to indoor air quality and scanty information is available on the air flora, particularly with respect to bio-aerosols in India. This paper reports a study which examined air quality in a prominent temple in the city of Mumbai. It was found that the indoor microbial load was significantly higher probably because appropriate ventilation systems were lacking. In the festive month of September, the highest bacterial counts (13.98 × 10⁴ CFU/m³) and fungal counts (9.22 × 10⁴ CFU/m³) were observed. Pseudomonas spp. and Aspergillus spp. were found to be predominant in the air microflora sampled. Correlation analysis with meteorological factors such as temperature, relative humidity and wind speed showed that these were non-significant. The study indicated that poor ventilation, number of occupants and their activities in a given area are largely responsible for the variation in microbial loads observed. The data generated underline the question of monitoring crowded areas including places of religious importance. Some remedial measures are suggested.     

Daily intake of heavy metals by infants through milk and milk products

Concentrations of the essential elements Zn and Cu and potentially toxic elements Pb and Cd in different milk samples and baby food materials were measured, primarily to assess whether the intakes comply with recommended desired levels for essential and permissible levels for toxic elements. The geometric mean concentrations of Pb, Cd, Cu and Zn in different types of milk were found to vary from 1.70 to 3.35, 0.07 to 0.10, 43.2 to 195 and 1772 to 4230 micrograms/l, while the same in different baby foods had values from 39.5 to 77.7, 0.45 to 17.7, 1106.3 to 3157.3 and 9367 to 34,592 micrograms/kg, respectively. The concentration of Cd was found to be very low (0.1 microgram/l) and fairly constant in all types of milk. The lead content in cow milk was observed to be lowest even in comparison with breast milk. Concentrations of all these metals are approximately one order of magnitude higher in baby food products than those observed in different types of milk owing to higher fat content. The infant baby food Amul Spray contains low concentrations of toxic (Pb and Cd) and high concentrations of essential (Cu and Zn) elements. The daily intakes of Pb, Cd, Cu and Zn by infants through milk and baby foods marketed in Mumbai city have also been estimated. The daily intakes of Pb (1.1 micrograms/kg) and Cd (0.01 microgram/kg) for infants through baby foods are well below the recommended tolerable levels of 3.57 micrograms/kg and 0.8-1.0 microgram/kg, respectively. Similarly the daily intake levels of essential elements are also significantly lower than the recommended desirable levels of 3-5 mg and 0.5-1.0 mg for Zn and Cu, respectively. Milk from an Indian mother also does not provide adequate levels of essential elements to the infants and children.     

Slumdogs vs. Millionaires: Balancing Urban Informality and Global Modernity in Mumbai, India

Mumbai and other Indian cities are rapidly transforming to address the needs of global commerce and the expanding middle class. Mumbai's vernacular environments, home to most working-class residents, are consequently being redeveloped using supermodern global aesthetics. The urbanism emerging from the current wave of modernism is an unprecedented radical departure from existing patterns of place. Proponents claim the new developments serve low-income residents' interests, when actually they ignore fundamental socio-cultural and economic realities. This paper considers two case studies, Dharavi and Girangaon, highlighting a subset of Mumbai's vernacular environments to argue for their significance and to explore alternative redevelopment approaches.     

Dietary intake of heavy metals in Bombay city,India

Concentrations of heavy metals such as Pb, Cd, Cu and Zn have been estimated in air particulates, water and food samples collected from different suburbs in Bombay during 1991–1994. The concentrations of these metals are translated into intake rates through inhalation and ingestion pathways. Results indicate the highest concentration of Pb and Cu are in pulses (green gram), Cd in leafy vegetables (amaranth) and Zn in meat. Root vegetables and fruits contained a lower concentration of these metals. Total intakes of Zn, Cu, Pb and Cd through air, water and food were 10500 μg/day, 1500 μg/day, 30 μg/day and 4.3 μg/day, respectively. Although the major contribution for the daily intake is the ingestion route, eventual uptake in the body stream is contributed through inhalation for Pb (41%) and Cd (16%) and ingestion for Cu (98.8%) and Zn (99.6%). The total intake of these elements through the duplicate diet study is 9500 μg/day for Zn, 1770 μg/day for Cu, 27 μg/day for Pb and 2.5 μg/day for Cd, respectively. The daily intake of these metals by the population of Bombay is well below the recommended dietary values.     

Daily intakes of copper, zinc and arsenic in drinking water by population of Shanghai, China

Daily intakes of metals in drinking water are of extreme importance in risk assessment to human health. Some papers focused on this topic, but most of them did not consider the effect of age, gender and work location on daily intakes of metals in drinking water. The objective of present paper is to estimate the levels of Cu, Zn and As ingestion in drinking water in Shanghai, China and the effect of age, gender and work location on daily intakes of these metals. It was also the first time that such a detailed investigation on daily intakes of metals in drinking water was carried out in China in recent years. Drink/Sample (D/S) method was used to estimate the daily intakes of Cu, Zn and As in drinking water. The mean concentrations of Cu, Zn and As in drinking water were 10.8 microg/l, 0.29 mg/l and 0.91 microg/l, which were lower than U.S. EPA's Drinking Water Equivalent Level (DWEL) and WHO guideline values. The average daily intakes of Cu, Zn and As in drinking water was 21.12 microg/d, 0.65 mg/d, and 1.83 microg/d, which were on average 0.01%, 1.1% and 1.5% of the provisional maximum tolerable daily intake (PMTDI) set by the Joint FAO/WHO Expert Committee. There was a significant difference in daily intake of Zn for different work locations (P=0.04). But no other significant differences in daily intakes of metals in drinking water were found according to age, gender and work location.     

Daily intake of TBT, Cu, Zn, Cd and As for fishermen in Taiwan

The consumption of contaminated seafood has been reported as an important route of human exposure to metals in Taiwan. We consider the concentrations of TBT, Cu, Zn, Cd, As, and the consumption of oysters of Taiwanese to be the important information related to public health in Taiwan. Therefore, the aim of this study was to evaluate the public health risks associated with TBT, Cu, Zn, Cd and As from shellfish for the general population and fishermen of Taiwan. In general, TBT concentrations in various oysters ranging from 0.32 to 1.51 microg/g dry wt. varied with sampling locations. The highest TBT, Cu, and Zn geometric mean (GM) concentrations in oysters of 1.51, 1180 and 1567 microg/g dry wt. were obtained from the Hsiangshan coastal area. The values of oyster consumption for fishermen were 94.1 and 250 g/day for typically and maximally exposed individuals, respectively. In particular, the highest intake (250 g/day) from fishermen was almost two times greater than that of the general population (139 g/day). The THQ (target hazard quotient) values of Hsiangshan's fishermen are 3.87 and 20.50 for TBT and Cu for maximally exposed individuals are higher than other oyster culture areas. It is interesting that those consuming oysters from Hsiangshan, Lukang, Taishi caused abnormally high THQs of TBT and other metals (100% over 1.0), and TBT was attributed to only 3-21% of the total THQs in different fishermen of Taiwan. Our results suggest that current environmental levels of TBT and other metals are associated with a significant potential threat to human health for fishermen resident in coastal areas of Taiwan.     

Improved indoor environment through optimised ventilator and furniture positioning: A case of slum rehabilitation housing,Mumbai, India

This study optimized the ventilator and furniture location of a tenement unit in a low-income urban habitat to obtain maximum experiential indoor environmental quality (e-IEQ) over the breathing zone. Hypothetical interior layouts using a combination of the two design parameters of ventilator location and bed position were generated for optimizing the design layout. This layout could promote maximum indoor airflow and minimum indoor air temperature and contaminant concentration. In this study, an improved indoor environment is hypothesized to be attainable through improved natural ventilation and thermal performance in the occupied zones. A sequential methodology involving “parametric design modeling–computational simulation–multiobjective optimization–multicriteria decision making”-based framework was selected. Results exhibited that the currently designed tenement unit had a poor indoor environment, whereas the hypothesized iterated layout “optimized design layout, scenario 3 (ODL 3)” derived from the optimization and decision-making algorithm performed effectively in providing e-IEQ. An increase in experiential indoor air velocity by 0.2 m/s and a decrease in temperature by 2 °C were observed over the monitoring point in the ODL 3 considering the existing scenario. Therefore, this study can find a way toward the development of sustainable habitat design guidelines under upcoming slum redevelopment policies across the nation.     

Atmospheric and children's blood lead as indicators of vehicular traffic and other emission sources in Mumbai, India

Average concentration of Pb in atmospheric air particulates in different suburbs of Mumbai was studied for almost a decade and its spatial and temporal profiles are discussed in relation to emission sources. In general the concentration of Pb in all the residential suburban atmosphere is well below the Central Pollution Control Board (CPCB, 1994) prescribed limit of 1.5 microg m(-3) barring a few exceptions for some residential/industrial sites, such as those of Thane and Kurla scrap yards. The correlation between blood lead of children and air lead reveals that the blood Pb level in children could increase by 3.6 microg dl(-1) for an incremental rise of 1.0 microg Pb m(-3) of air. The temporal profile of air Pb values indicates a decreasing trend in residential suburbs (Khar: 1984, 0.39 microg m(-3); 1996, 0.17 microg m(-3)) as well as in suburban residential areas with low traffic (Goregaon: 1984, 0.53 microg m(-3); 1996, 0.30 microg m(-3)).     

Daily intakes of 238U, 234U, 232Th, 230Th, 228Th and 226Ra in the adult population of central Poland.

Activity concentration of the uranium and thorium series radionuclides was determined in foodstuffs and drinking water in central Poland. Annual and daily intake for the adult population was estimated from the concentrations determined and average annual consumption of food and water. The daily intakes (in mBq) were 22.1 (238U), 26.5 (234U), 2.38 (232Th), 4.06 (230Th), 11.2 (228Th) and 42.2 (226Ra). The intake of uranium isotopes occurred mainly with water; the main intake of thorium isotopes was with animal products, vegetables, cereals and potatoes, whereas 226Ra entered mainly with animal products, cereals and vegetables. From the intake and dose coefficients, the annual effective doses for the ingested radionuclides were calculated. The annual effective dose was 5.95 microSv, of which 72.4% originated from 226Ra.     

The physical face of slums: a structural comparison of slums in Mumbai,India, based on remotely sensed data

The term “slum” is difficult to define, but if we see one, we know it. Definitions for slums are qualitative such as “areas of people lacking, for example, durable housing or easy access to safe water”. This study aims at identifying characteristic physical features of the built environment that allows defining slum areas based on quantitative and measurable parameters. In general, spatial data on slums are generalized, outdated, or even nonexistent. The bird’s eye view of remotely sensed data is capable to provide an independent, area-wide spatial overview, to capture the complex morphological pattern and at the same time capture the large-scale individual objects typical for slums. Using high-resolution optical satellite data, parameters such as building density, building heights, and sizes are used to differentiate between slums and formal settlements. From it, the physical features are used to analyze structural homogeneity and heterogeneities within and across slums and to suggest characteristic physical features for spatial slum delineation at three study sites in Mumbai, India.     

Extent of sewage pollution in coastal environment of Mumbai,India: an object‐based image analysis

The coastal water quality of Mumbai is deteriorating by receiving partially treated effluent from wastewater treatment facilities, sewage discharges from ocean outfalls and discharges from point and non‐point sources in the creek and coast. A novel approach of object‐based image analysis has been used in this research study to assess the extent of sewage pollution in the coastal environment of Mumbai. For this, Indian Remote Sensing P6 Linear Imaging Self Scanning IV image was used for multiresolution segmentation and rule‐based image classification as per normalised difference water index and normalised difference turbidity index. Water quality regions as per classification were strongly correlated with observed water quality parameters. Based on classified regions and water quality parameters, extent of sewage pollution in the coast was ranked from high to least polluted. The approach developed in this methodology should be tested in similarly polluted waters to ascertain its adaptability for assessing the spatial extent of sewage pollution.     

Arsenic intake via water and food by a population living in an arsenic-affected area of Bangladesh

More and more people in Bangladesh have recently become aware of the risk of drinking arsenic-contaminated groundwater, and have been trying to obtain drinking water from less arsenic-contaminated sources. In this study, arsenic intakes of 18 families living in one block of a rural village in an arsenic-affected district of Bangladesh were evaluated to investigate their actual arsenic intake via food, including from cooking water, and to estimate the contribution of each food category and of drinking water to the total arsenic intake. Water consumption rates were estimated by the self-reporting method. The mean drinking water intake was estimated as about 3 L/d without gender difference. Arsenic intakes from food were evaluated by the duplicate portion sampling method. The duplicated foods from each family were divided into four categories (cooked rice, solid food, cereals for breakfast, and liquid food), and the arsenic concentrations of each food category and of the drinking water were measured. The mean arsenic intake from water and food by all 18 respondents was 0.15 +/-0.11 mg/d (range, 0.043 - 0.49), that by male subjects was 0.18 +/- 0.13 mg/d (n = 12) and that by female subjects was 0.096 +/- 0.007 mg/d (n = 6). The average contributions to the total arsenic intake were, from drinking water, 13%; liquid food, 4.4%; cooked rice, 56%; solid food, 11%; and cereals, 16%. Arsenic intake via drinking water was not high despite the highly contaminated groundwater in the survey area because many families had changed their drinking water sources to less-contaminated ones. Instead, cooked rice contributed most to the daily arsenic intake. Use of contaminated water for cooking by several families was suspected based on comparisons of arsenic concentrations between drinking water and liquid food, and between rice before and after cooking. Detailed investigation suggested that six households used contaminated water for cooking but not drinking, leading to an increase of arsenic intake via arsenic-contaminated cooking water.