共查询到20条相似文献,搜索用时 796 毫秒
1.
COM+及其在组态软件中的应用研究 总被引:3,自引:0,他引:3
文章概要介绍了COM+组件技术,研究了 COM+在组态软件中的应用,并探讨了基于 COM+的多层组态软件的设计与实现方法,有效地解决了传统工控软件存在的问题。 相似文献
2.
Endress+Hauser(E+H)工业现场仪表广泛应用于石油、冶金、电力、生命科学等多个核心行业,具有可靠集成、精准测量、交互式数据管理等特点。为提高实验装置工业适用性,培养学生熟练运用工业级传感器和过程监控的操作技能,将这类传感器引入实验室,设计了一套E+H组合式过程测控装置与实时监控系统。系统以过程控制涉及的典型对象为基础,以PLC为控制主体,组合装配多类工业级E+H传感器完成检测与控制,并具备实时组态控制显示和远程可视化监控功能。可实现自主设计并完成工业过程中常见的液位、流量、温度、溶液PH等控制量的测控实验,为自动化、测控技术、传感器等相关专业课程提供综合实验平台。 相似文献
3.
4.
论述由紫金桥监控组态软件、清华大学小型多参数过程控制实验台利用互联网共同构建的过程控制远程教学实验系统,完成远程PID、前馈/反馈控制,实现网络实验室。 相似文献
5.
6.
7.
本文介绍了EPA功能块基本模型及功能块定义并主要描述了PID功能块在单片机上的设计方案及PID功能块过程控制算法的具体实现,并通过组态软件验证了PID的过程控制算法及抗干扰的功能. 相似文献
8.
针对洛阳钼业集团金属材料有限公司钼铁冶炼的实际应用,介绍了由艾默生过程控制有限公司Deltav组态软件实现的DCS控制系统。 相似文献
9.
本文详细介绍了用于工业过程控制监控级的组态软件中图形组态的功能分析、软件设计、具体实现和实际运用。实现后的图形组态具有可视化交互工的友好界面,简单易学,操作方便,功能齐全,适合我国中小型企业使用的二级集散式控制系统工业控制流程图的绘制与实现。 相似文献
10.
工控可视化用户工具的设计与实现 总被引:1,自引:0,他引:1
本文详细介绍了用于工业过程控制监控级的组态软件中图形组态的功能分析、软件设计、具体实现和实际运用。实现后的图形组态具有可视化交互式的友好界面,简单易学,操作方便,功能齐全,适合我国中小型企业使用的二级集散式控制系统工业控制流程图的绘制与实现。 相似文献
11.
In this paper, a parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller is proposed. It is derived from the conventional parallel proportional-integral-derivative (PID) controller. It preserves the linear structure of a conventional parallel PID controller, with analytical formulas. The final shape of the controller is a discrete-time fuzzy version of a conventional parallel PID controller. Computer simulations are performed to evaluate the performance of the FP+FI+FD controller for setpoint tracking and load-disturbance rejection for some complex processes, such as first- and second-order processes with delay, inverse response process with and without delay and higher order processes. Also, the performance of the proposed fuzzy controller is evaluated experimentally on highly nonlinear liquid-flow process with a hysteresis characteristic due to a pneumatic control valve. The simulation and real time control is done using National Instrument hardware and software (LabVIEW). The response of the FP+FI+FD controller is compared with the conventional parallel PID controller, tuned with the Ziegler-Nichols (Z-H) and Astrom-Hagglund (A-H) tuning technique. It is observed that the FP+FI+FD controller performed much better than the conventional PI/PID controller. Simulation and experimental results demonstrate the effectiveness of the proposed parallel FP+FI+FD controller. 相似文献
12.
13.
本文介绍了SUPCONECS-100集散控制系统在云南锡业股份有限公司冶炼厂粉煤制备工序控制系统改造中的应用,并针对该集散控制系统的结构和功能特点阐述了粉煤制备工序中的一些特殊的控制方案。 相似文献
14.
The paper addresses the adaptive behaviour of parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller. The parallel FP+FI+FD controller is actually a non-linear adaptive controller whose gain changes continuously with output of the process under control. Two non-stationary processes, whose characteristics change with time, are considered for simulation study. Simulation is performed using software LabVIEW TM . The set-point tracking response of parallel FP+FI+FD is compared with conventional parallel proportional plus integral plus derivative (PID) controller, tuned with the Ziegler-Nichols (Z-N) tuning technique. Simulation results show that conventional PID controller fails to track the set-point and becomes unstable as the process changes its characteristic with time. But the parallel FP+FI+FD controller shows considerably much better set-point tracking response and does not deviate from steady state. Also, a huge spike is observed in the output of PID controller as the reference set-point and process parameters are changed, while the FP+FI+FD controller gives spike free control signal. 相似文献
15.
在重介质选煤过程中 ,重介质悬浮液工艺参数的变化对分选效果有显著的影响。文章详细介绍了其计算机监控系统的设计思想、系统组成及软件开发等。 相似文献
16.
17.
给出了采煤机自动控制系统结构;介绍了采煤机自动控制的实现:采用全截深双向跟机自动化割煤工艺和采煤机记忆截割技术,通过定义采煤机的位置参数和采煤机记忆截割参数表、液压支架跟机操作状态表,实现1个采样间隔长度内采煤机割煤流程,针对煤层条件突变采用基于人工免疫的方法处理;研究了基于灰色系统理论的采煤机自动控制优化方法。测试结果验证了该方法的可行性。 相似文献
18.
19.
20.
相对于单一煤层或其他煤层群开采,近距离煤层群在开采过程中邻近层受到开采层应力影响更为剧烈,瓦斯更容易通过发育的裂隙涌入开采层,造成开采层工作面瓦斯积聚。现有的针对近距离煤层群的瓦斯治理研究主要侧重于单一措施参数的确定及效果分析,没有深入研究瓦斯治理措施在时间、空间层面之间的联系,对综合瓦斯治理措施的优选组合、具体参数的确定依据及措施采取后的效果分析不够深入。针对上述问题,以阳煤一矿81403综采工作面为研究对象,通过数值模拟方式分析了近距离煤层群条件下开采应力分布及演化过程,研究了上覆岩层破坏及裂隙发育变化规律,得到了81403综采工作面瓦斯主要来源为煤层解吸瓦斯、上邻近层卸压瓦斯、采空区瓦斯等,针对不同瓦斯涌出源头和特点,优先采取顺层预抽+高抽巷+高位钻孔+采空区埋管的瓦斯抽采措施,即在开采前充分预抽减少煤层解析瓦斯量,通过高位钻孔、高抽巷处理邻近层瓦斯涌入,采用埋管治理上隅角瓦斯局部聚集,在时间和空间上形成综合的治理体系,从而达到瓦斯治理目的。实际应用结果表明,工作面回采期间瓦斯抽采率达到了89.9%,回风巷及上隅角瓦斯体积分数保持在1%以下,保证了工作面的安全回采。 相似文献