左手材料在天线中的应用研究进展

从理论上解释了左手材料用于天线设计时实现天线高指向性、高效率、小型化以及大扫描范围的原因,重点介绍了基于金属谐振结构和复合左/右手传输线(CRLH TL)结构的左手材料用于天线设计时的研究进展,指出金属谐振结构在提高天线方向性、增大天线增益、减小天线体积等方面具有很大优势,CRLH TL结构在提高天线带宽、增加天线频带、增大漏波天线扫描范围等方面具有潜在的应用价值。     

Compact active integrated microstrip antennas with circular polarisation diversity

A compact active integrated microstrip antenna with circular polarisation (CP) diversity for a global positioning system (GPS) receiver is presented. As a radiator, a diamond-shaped micro- strip ring patch with four embedded slots has been newly proposed to realise wide impedance bandwidth, compact size and dual CP. The active circuitry, consisting of both switching circuits and a small signal amplifier, is placed at the square opening inside the radiator. Thus, all electrical parts are mounted on the top layer of the circuit board. CP diversity is achieved by the switching circuit, and its output signal is amplified. The proposed antenna has been simulated and fabricated on the FR-4 PCB board. The size of the fabricated active antenna, including the radiator and active circuitry, is only about 57% of a conventional square-microstrip antenna with a side of half wavelength. From the measured radiation patterns and CP bandwidth for either polarisation selection, it is proven that this antenna has successfully performed the polarisation diversity. In addition, the measured minimum antenna gain of 12 dBi is estimated to be good enough to improve the GPS receiver performance.     

外推法天线增益测量的核心算法及实验研究

基于外推法测量原理研究了外推法天线增益测量核心算法,重点在于天线互耦的滤波抑制、功率级数展开式的拟合和任意距离下的天线增益求解.此外,还基于以上核心算法设计了一款外推法天线增益测量界面,为外推法天线增益的精密测量提供便利.最后,开展了 W波段标准天线的增益校准实验,增益测量结果与NPL的测量偏差小于0.04 dB,实现...     

Multipatches multilayered UWB microstrip antennas

The authors present multipatches multilayered ultra-wideband (UWB) microstrip antennas. The antenna comprises a driven patch radiator with five parasitic patch radiators. Two antennas with different dielectric substrate combinations are studied. The antenna with low-high-low dielectric constant substrate combination (Antenna no. 1) has an improved performance in terms of impedance bandwidth, gain, overall antenna size and beam-squinting over the antenna with low-low-low dielectric constant substrate combination (Antenna no. 2). The low-high-low dielectric constant combination consisting of three dielectric substrates, namely low dielectric constant (ϵr = 3.38) for both bottom and upper substrate but, high dielectric constant (ϵr = 6.15) for middle substrate. Five parasitic patches and multi-dielectric layers are used for wide impedance bandwidth and less boresight gain variation with frequency. A measured 10 dB return loss bandwidth of 48% with boresight gain .5.0 dBi is achieved. Antenna no. 1 can have 8% wider impedance bandwidth, 40% overall area reduction and less beam-squinting compared with Antenna no. 2.     

Investigation of anisotropic negative permeability medium cover for patch antenna

A more directional and higher gain patch antenna with an anisotropic negative permeability medium (NPM) cover is proposed. The patch antenna operates at the frequency where the permeability of split-ring resonator (SRR) is negative, and then the sideward radiation can be forbidden. It leads to a significant enhancement of designing the high gain antenna. We investigate numerically and experimentally the performance of the antenna when NPM composed of SRR is placed above the patch antenna. The measured result has a good agreement with the simulation. Compared with the conventional antenna, the result shows that the beam of antenna with the NPM cover becomes more convergent, half-power beamwidth is smaller by almost 30deg in the H-plane and 10deg in the E-plane and the gain is higher by 4.03 dB. Moreover, NPM cover can have applications in the other types of antenna such as monopoles, dipole antennas, leak-wave antennas and aperture antennas.     

一种新型复合左右手负阶谐振天线的设计

为了获得高增益小尺寸天线,通过在基片集成波导上引入二阶Hilbert分形缝隙,提出了一种新型复合左右手传输线.在等效电路模型的基础上,利用HFSS和Serenade软件对该传输线的电路参数进行了提取;利用MATLAB语言给出了该传输线的色散曲线;最后,由该传输线设计了终端短路的缝隙天线.实验结果表明：该天线馈电网络简单,工作在复合左右手传输线的-1阶模式上,比之前报道的复合左右手谐振天线具有更小的电尺寸和更高的增益.由于这些性能,使得该天线可以用于无线通信系统中.     

Compact wideband Koch fractal printed slot antenna

A compact wideband printed slot antenna, suitable for wireless local area network (WLAN) and satisfying the worldwide interoperability for microwave access (WiMAX) applications, is proposed here. The antenna is microstrip-fed and its structure is based on Koch fractal geometry where the resonance frequency of a conventional triangular slot antenna is lowered by applying Koch iterations. The antenna size inclusive of the ground plane is compact and has a wide operating bandwidth. The proposed second iteration Koch slot antenna operates from 2.33 to 6.19 GHz covering the 2.4/5.2/5.8 GHz WLAN bands and 2.5/3.5/5.5 GHz WiMAX bands. The antenna exhibits omnidirectional radiation coverage with a gain better than 2.0 dBi in the entire operating band. Design equations for the proposed antenna are developed and their validity is confirmed on different substrates and for different slot sizes.     

Compact broadband coplanar waveguide-fed curved quasi-Yagi antenna

A novel uniplanar coplanar waveguide-fed quasi-Yagi antenna is presented. The originality of this design is because of its feed selection and its elliptical structure and in doing so achieving a wide bandwidth and compact size. An X-band prototype is developed and measures a bandwidth of 40%, with 3.2 dBi gain and 11 dB front-to-back ratio measured at 10 GHz. The antenna is realised on a high dielectric constant substrate and is compatible with monolithic microwave integrated circuits and solid-state devices     

V-Shaped Monopole Antenna with Chichena Itzia Inspired Defected Ground Structure for UWB Applications

Due to rapid growth in wireless communication technology, higher bandwidth requirement for advance telecommunication systems, capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired. In this paper, a compact Ultra-Wideband (UWB) V-shaped monopole antenna is presented. UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape. The proposed V-shaped is designed by incorporating a rectangle, and an inverted isosceles triangle using FR4 substrate. The size of the antenna is 25 mm×26 mm×1.6 mm. The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial, Scientific, and Medical (ISM), Worldwide Interoperability for Microwave Access (WiMAX), (IEEE 802.11/HIPERLAN band, 5G sub 6 GHz) which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission (FCC) with a maximum gain of 3.83 dB. The antenna is designed in Ansys HFSS. Results for key performance parameters of the antenna are presented. The measured results are in good agreement with the simulated results. Due to flat gain, uniform group delay, omni directional radiation pattern characteristics and well-matched impedance, the proposed antenna is suitable for WiMAX, ISM and heterogeneous wireless systems.     

Horn antenna analysis as applied to the evaluation of thegain-transfer method

An important condition that has to be satisfied when implementing the gain-transfer method is that the fields in the test zone of the measurement facility should be as close to the plane wave as possible. In this paper, the effect of amplitude and phase deviation from a perfect plane wave, on gain measurements for microwave aperture antennas, conducted via the gain-transfer method, is determined and quantified. The pyramidal horn antenna is used as a basis for all calculations as it is the universal standard for microwave antenna gain measurements. Coupling, between the antenna being illuminated and the test zone fields, is evaluated by means of the reciprocity theorem. Test zone field variations are simulated and the effect thereof, on the predicted measured gain, is illustrated     

Frequency Reconfigurable Antenna for Portable Wireless Applications

In this paper, the design and experimental evaluation of a hexagonal-shaped coplanar waveguide (CPW)-feed frequency reconfigurable antenna is presented using flame retardant (FR)-4 substrate with size of 37 × 35 × 1.6 mm³. The antenna is made tunable to three different modes through the status of two pin diodes to operate in four distinct frequency bands, i.e., 2.45 GHz wireless fidelity (Wi-Fi) in MODE 1, 3.3 GHz (5G sub-6 GHz band) in MODE 2, 2.1 GHz (3G Long Term Evolution (LTE)-advanced) and 3.50 GHz Worldwide Interoperability for Microwave Access (WiMAX) in MODE 3. The optimization through simulation modeling shows that the proposed antenna can provide adequate gain (1.44~2.2 dB), sufficient bandwidth (200~920 MHz) and high radiation efficiency (80%~95%) in the four resonating frequency bands. Voltage standing wave ratio (VSWR) < 1.5 is achieved for all bands with properly matched characteristics of the antenna. To validate the simulation results, fabrication of the proposed optimized design is performed, and experimental analysis is found to be in a considerable amount of agreement. Due to its reasonably small size and support of multiple frequency bands operation, the proposed antenna can support portable devices for handheld 5G and Wireless LAN (WLAN) applications.     

High-temperature superconductor antennas: Utilization of low rf losses and of nonlinear effects

The low radio frequency (r.f.) losses in epitaxial HTS thin films allow the realization of novel antenna structures which have to be excluded in conventional antenna techniques with normal conductors because of the highly reduced radiation efficiency. Thus, the design of miniaturized but nevertheless highly efficient antennas down to a lower limit determined by both the required order of radiation pattern and the frequency bandwidth becomes possible. For a bandwidth of more than about 1%, a considerable margin for a size reduction below the critical size is restricted to the case of electrically small antennas and of superdirective antennas with a relatively low order of the radiation pattern, e.g. antennas with a beam of less than 15 dB maximum gain. If the size approaches the lower limit, the antennas show a sharp bandpass frequency response. This is demonstrated by means of experimental results for a novel HTS meander antenna. These bandpass characteristics can be utilized in compact multiport antenna systems in order to decouple subantennas for adjacent frequency bands. Besides the low losses in HTS's, their nonlinear properties can be used in order to realize current-controlled HTS switches for antenna systems.     

Quintuple Band Antenna for Wireless Applications with Small Form Factor

A coplanar waveguide-fed quintuple band antenna with a slotted circular-shaped radiator for wireless applications with a high isolation between adjacent bands is presented in this paper. The proposed antenna resonates at multiple frequencies with corresponding center frequencies of 2.35, 4.92, 5.75, 6.52, and 8.46 GHz. The intended functionality is achieved by introducing a circular disc radiator with five slots and a U-shaped slot in the feed. The proposed antenna exhibits coverage of the maximum set of wireless applications, such as satellite communication, worldwide interoperability for microwave access, wireless local area network (WLAN), long-distance radio telecommunications, and X-band/Satcom wireless applications. The simulation and measurement results of the proposed fabricated antenna demonstrate the high isolation between adjacent bands. A stable realized gain with an advantageous radiation pattern is achieved at the operating frequency bands. The proposed simple design, compact structure, and simple feeding technique make this antenna suitable for integration in several wireless communication applications, where the portability of devices is a significant concern. The proposed antenna is anticipated to be an appropriate candidate for WLAN, long-term evolution, and fifth-generation mobile communication because of its multi-operational bands and compact size for handheld devices.     

Reduction of ground-plane-dependent effects on microstrip-fed printed rectangular monopoles

Methods to mitigate the strong dependence of impedance bandwidth on the ground- plane size for a rectangular printed planar monopole is described. It is shown that the bandwidth limitation may be overcome by introducing feed-line asymmetry, which alters the purity and the Q of the higher frequency modes and by ground-plane augmentation, which effects the lower frequency modes. A method of extending the ground plane without increasing the overall antenna size is shown to improve both the bandwidth and gain and also to enable the use of significantly smaller ground planes. The effects of these techniques on radiation pattern are discussed.     

Compact coplanar waveguide-fed ultra-wideband monopole-like slot antenna

A simple and compact coplanar waveguide (CPW)-fed ultra-wideband (UWB) monopole-like slot antenna is presented. The proposed antenna comprises a monopole-like slot and a CPW fork-shaped feeding structure, which is etched onto an FR4 printed circuit board (PCB) with an overall size of 26 mm x 29 mm x 1.5 mm. The simulation and experiment show that the proposed antenna achieves good impedance matching, consistent gain, stable radiation patterns and consistent group delay over an operating bandwidth of 2.7?12.4 GHz (128.5%). Furthermore, through adding two more grounded open-circuited stubs, the proposed antenna design features band-notched characteristic in the band of 5?6 GHz while maintaining the desirable performance over lower/upper UWB bands of 3.1?4.85 GHz/6.2?9.7 GHz.     

Inkjet Printed Metamaterial Loaded Antenna for WLAN/WiMAX Applications

In this paper, the design and performance analysis of an Inkjet-printed metamaterial loaded monopole antenna is presented for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications. The proposed metamaterial structure consists of two layers, one is rectangular tuning fork-shaped antenna, and another layer is an inkjet-printed metamaterial superstate. The metamaterial layer is designed using four split-ring resonators (SRR) with an H-shaped inner structure to achieve negative-index metamaterial properties. The metamaterial structure is fabricated on low-cost photo paper substrate material using a conductive ink-based inkjet printing technique, which achieved dual negative refractive index bands of 2.25–4.25 GHz and 4.3–4.6 GHz. The antenna is designed using a rectangular tuning fork structure to operate at WLAN and WiMAX bands. The antenna is printed on 30 × 39 × 1.27 mm3 Rogers RO3010 substrate, which shows wide impedance bandwidth of 0.75 GHz (2.2 to 2.95 GHz) with 2 dB realized gain at 2.4 GHz. After integrating metamaterial structure, the impedance bandwidth becomes 1.25 GHz (2.33 to 3.58 GHz) with 2.6 dB realized gain at 2.4 GHz. The antenna bandwidth and gain have been increased using developed quad SRR based metasurface by 500 MHz and 0.6 dBi respectively. Moreover, the proposed quad SRR loaded antenna can be used for 2.4 GHz WLAN bands and 2.5 GHz WiMAX applications. The contribution of this work is to develop a cost-effective inject printed metamaterial to enhance the impedance bandwidth and realized the gain of a WLAN/WiMAX antenna.     

高阻抗电磁表面对贴片天线性能的影响

研究了高阻抗表面对矩形贴片天线及贴片天线阵列性能的影响.结果表明: 当高阻抗表面的金属盘与贴片天线形状相同、大小接近时,二者在天线的工作频率上发生谐振,可以大大增加天线的增益,本文中单贴片天线和双贴片天线阵列的增益分别增加了5.2 dB、4.5 dB.对于阵列天线,还可以利用高阻抗表面来抑制第一副瓣电平.理论模拟与实验结果基本一致.     

Design and Analysis of Antipodal Vivaldi Antennas for Breast CancerDetection

This paper presents the design and analysis of antipodal Vivaldi antennas (AVAs) for breast cancer detection. In order to enhance the antenna gain, different techniques such as using the uniform and non-uniform corrugation, expanding the dielectric substrate and adding the parasitic patch are applied to original AVA. The design procedure of two developed AVA structures i.e., AVA with non-uniform corrugation and AVA with parasitic patch are presented. The proposed AVAs are designed on inexpensive FR4 substrate. The AVA with non-uniform corrugation has compact dimension of mm² or , where is wavelength of the lowest operating frequency. The antenna can operate within the frequency range from 1.63 GHz to over 8 GHz. For the AVA with parasitic patch and uniform corrugation, the overall size of antenna is mm² or It can operate within the frequency range from 1.4 GHz to over 8 GHz. The maximum gain for AVA with non-uniform corrugation and AVA with parasitic patch and uniform corrugation are 9.03 and 11.31 dBi, respectively. The corrugation profile and parasitic patch of the proposed antenna are optimized to achieve the desired properties for breast cancer detection. In addition, the proposed AVAs are measured with breast phantom to detect cancerous cell inside the breast and the performance in detecting cancerous cell are discussed. The measured result can confirm that the proposed AVAs can detect unwanted cell inside the breast while maintaining the compact size, simple structure and low complexity in design.     

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel, ultrawideband (UWB) planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things (IoT) applications. The total electrical dimensions of the proposed compact UWB antenna are 0.19 λ_o × 0.215 λ_o × 0.0196 λ_o with the overall physical sizes of 15 mm × 17 mm × 1.548 mm at the lower resonance frequency of 3.8 GHz. The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation. The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at −10 dB return loss with a fractional bandwidth (FBW) of about 122%. The numerically computed and experimentally measured results agree well in between. A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation. The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%. The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.     

Gain-Enhanced Metamaterial Based Antenna for 5G Communication Standards

Metamaterial surfaces play a vital role to achieve the surface waves suppression and in-phase reflection, in order to improve the antenna performance. In this paper, the performance comparison of a fifth generation (5G) antenna design is analyzed and compared with a metamaterial-based antenna for 5G communication system applications. Metamaterial surface is utilized as a reflector due to its in-phase reflection characteristic and high-impedance nature to improve the gain of an antenna. As conventional conducting ground plane does not give enough surface waves suppression which affects the antenna performance in terms of efficiency and gain etc. These factors are well considered in this work and improved by using the metamaterial surface. The radiating element of the proposed metamaterial based antenna is made up of copper material which is backed by the substrate, i.e., Rogers-4003 with a standard thickness, loss tangent and a relative permittivity of 1.524 mm, 0.0027 and 3.55, correspondingly. The proposed antenna with and without metamaterial surface operates at the central frequency of 3.32 GHz and 3.60 GHz, correspondingly. The traditional antenna yields a boresight gain of 2.76 dB which is further improved to 6.26 dB, using the metamaterial surface. The radiation efficiency of the proposed metamaterial-based 5G antenna is above 85% at the desired central frequency.