High photocatalytic hydrogen production from methanol aqueous solution using the photocatalysts CuS/TiO2

Photocatalysts CuS/TiO₂ for hydrogen production were synthesized by hydrothermal method at high temperature and characterized by XRD, UV–visible DRS, XPS, EDX, SEM and TEM. When TiO₂ was loaded with CuS, it showed photocatalytic activities for water decomposition to hydrogen in methanol aqueous solution under 500 W Xe lamp. Among the photocatalysts with various compositions, the one with 1 wt% CuS-loaded TiO₂ showed the maximum photocatalytic activity for water splitting, which indicated CuS could improve the separation ratio of photoexcited electrons and holes. What's more, the amounts of the produced hydrogen was about 570 μmol h⁻¹, which had exceeded pure titania (P25) 32 times. In the present paper, it is proven that CuS can act as an effective co-catalyst to enhance the photocatalytic H₂ production activity of TiO₂.     

Nickel sulfide as co-catalyst on nanostructured TiO2 for photocatalytic hydrogen evolution

In this study, TiO₂ photocatalysts with nickel sulfide cocatalyst are prepared by loading nickel sulfide on TiO₂ with solvothermal synthesis approach. The materials were prepared by glycol solvothermal method using anatase, nickel nitrate, thiourea as precursor. The prepared catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS), and X-ray photoelectron spectroscopy (XPS). This is the first time to report that NiS is used as a cocatalyst with TiO₂ for the photocatalytic production of H₂. The results revealed that the structure and the amount of the cocatalyst loaded on TiO₂ play important roles in the photocatalytic activity of NiS/TiO₂ composite. The maximum evolution of H₂ was obtained when NiS had hexagonal structure with content in the composite of 7 at% in relation to TiO₂. The rate of H₂ evolution was increased up to about 30 times than that of TiO₂ alone.     

Modification of the photocatalytic properties of self doped TiO2 nanoparticles for hydrogen generation using sunlight type radiation

Synthetic approaches/methodologies can change the properties of nanoparticles significantly. In this study, the photocatalytic property of self (Ti³⁺) doped TiO₂ nanoparticles was modified by synthesizing through different routes. Solvothermal (T-Sol), sonochemical (T-Son) and polyol (T-Pol) methods were employed to prepare TiO₂ nanoparticles and the photocatalytic activities of these samples were compared with that of the sample prepared by precipitation using ammonia solution (T-Ppt). All samples had particle size below 30 nm except T-Son, where small nanoparticles existed as large spherical agglomerates with size around 500 nm. Surface area and porosity measurements of these different TiO₂ samples showed a significant dependency on the synthesis method. UV–Visible absorption spectra showed the onset of absorption at ∼440 nm for all samples due to the presence of defect levels originating from anion vacancies. Photocatalytic activity for hydrogen generation decreased in the order T-Sol > T-Son > T-Pol > T-Ppt and the observed activity is correlated with their physical properties such as surface area and crystallinity. The hydrogen yield was highly enhanced by the addition of Pd metal as co-catalyst on the surface of TiO₂ photocatalysts. Present experiments clearly demonstrate the importance of synthesis route to improve the photocatalytic activity of TiO₂.     

Photocatalytic properties of redox-treated Pt/TiO2 photocatalysts for H2 production from an aqueous methanol solution

The influence of redox-treated Pt/TiO₂ photocatalysts on H₂ production is investigated. Catalyst characterizations are performed by TEM, XPS, XRD, BET, and UV–vis/DR spectroscopy techniques. In terms of production rate, the oxidation treatment shows higher reactivity than the reduction treatment. The reduction treatment allows the formation of metallic Pt(0), which more easily catalyzes the transition of TiO₂ from the anatase to the rutile phases. Reduction-treated Pt/TiO₂ photocatalysts have lower S_BET values than oxidation-treated Pt/TiO₂ photocatalysts due to the higher percentage of TiO₂ in the rutile phase. Combining the results of XPS and optical analyses, PtO/TiO₂ shows a higher energy band gap than metallic Pt(0)/TiO₂, indicating that oxidation-treated Pt/TiO₂ is more capable of achieving water splitting for H₂ production. According to the results of this study, the oxidation treatment of Pt/TiO₂ photocatalysts can significantly enhance the reactivity of photocatalytic H₂ production because of their homogenous distribution, lower phase transition, higher S_BET, and higher energy band gap.     

Facile fabrication of Bi2O3/TiO2-xNx nanocomposites for excellent visible light driven photocatalytic hydrogen evolution

Mesoporous Bi₂O₃/TiO_2−xN_x nanocomposites (BiNT) were synthesized by soft chemical template free homogeneous co-precipitation technique. XRD, XPS, TEM, UV-Vis DRS and photoluminescence studies were adapted to determine the structural, electronic and optical properties. The photocatalytic activities of the catalysts were evaluated for water splitting to generate clean hydrogen fuel under visible light irradiation (λ ≥ 400 nm). BiNT-400 catalyst showed highest results towards hydrogen production (198.4 μmol/h) with an apparent quantum efficiency of 4.3%. The pronounced activity of BiNT-400 sample towards hydrogen production was well consistent with high crystallinity, large surface area, proper excitation by N doping and Bi₂O₃ sensitization.     

Synthesis of g-C3N4/TiO2 with enhanced photocatalytic activity for H2 evolution by a simple method

A photocatalyst composed of graphite-like carbon nitride (g-C₃N₄) and TiO₂ was fabricated by a simple method to calcine the mixture of melamine and TiO₂ precursor. The photocatalyst has enhanced photoactivity for hydrogen evolution from water. Characterization by XRD, FTIR, SEM and elemental analysis showed that the crystal structure and morphologies of composites were affected by the amount of melamine in the composite. The UV–Vis characterization displayed that the optical absorption range of g-C₃N₄/TiO₂ hybrid was broadened with a synergistic effect. The photoactivity for H₂ evolution was shown that the best result obtained from the composite with 67 wt% melamine has about 5 times improvement compared with bare TiO₂ or pure g-C₃N₄. The enhanced photoactivity might be related with the favorable structure resulted from heat-treatment temperature, and the content of g-C₃N₄ participating in wide optical absorption, separation and transportation of electronic-holes, as well as morphology of composite.     

CuCr2O4/TiO2 heterojunction for photocatalytic H2 evolution under simulated sunlight irradiation

CuCr₂O₄/TiO₂ heterojunction has been successfully synthesized via a facile citric acid (CA)-assisted sol-gel method. Techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectrum (UV-vis DRS) have been employed to characterize the as-synthesized nanocomposites. Furthermore, photocatalytic activities of the as-obtained nanocomposites have been evaluated based on the H₂ evolution from oxalic acid solution under simulated sunlight irradiation. Factors such as CuCr₂O₄ to TiO₂ molar ratio in the composites, calcination temperature, photocatalyst mass concentration, and initial oxalic acid concentration affecting the photocatalytic hydrogen producing have been studied in detail. The results showed that the nanocomposite of CuCr₂O₄/TiO₂ is more efficient than their single part of CuCr₂O₄ or TiO₂ in producing hydrogen. The optimized composition of the nanocomposites has been found to be CuCr₂O₄·0.7TiO₂. And the optimized calcination temperature and photocatalyst mass concentration are 500 °C and 0.8 g l⁻¹, respectively. The influence of initial oxalic acid concentration is consistent with the Langmuir model.     

Photocatalytic H2 evolution on a novel CaIn2S4 photocatalyst under visible light irradiation

A novel visible-light-driven photocatalyst CaIn₂S₄ was synthesized using a facile hydrothermal method followed by a post-calcination process. The influence of the calcination temperature and time on the activities of the photocatalyst was investigated. CaIn₂S₄ exhibits optical absorption predominantly in visible region with an optical band gap of 1.76 eV. Considerable activity for hydrogen evolution from pure water was observed without any sacrificial agents or cocatalysts under visible light irradiation. The maximum hydrogen evolution rate achieved was 30.92 μmol g⁻¹ h⁻¹ without obvious deactivation of the photocatalytic activity for four consecutive runs of 32 h.     

Visible light driven photocatalytic hydrogen evolution and photophysical properties of Bi doped NaTaO3

Visible light active Bismuth doped NaTaO₃ powders were synthesized by the conventional solid state route for different Bi concentrations (2.5%, 5.0%, and 7.5% by moles). The optical properties of the doped samples were tuned by changing the molar ratio of Na and Ta in the initial reactants. The doped samples prepared with Na/Ta ratio close to unity (1.01–1.03) resulted in the highest band gap narrowing compared to the other synthesis conditions. It was shown that the photocatalytic hydrogen evolution occurred from these samples under the visible light irradiation (λ > 390 nm) after loading of appropriate amount of platinum co-catalyst. The other synthesis conditions (Na/Ta = 1/1−x; x = 0.025, 0.05, 0.075 and Ta/Na = 1/1−x; x = 0.025, 0.05, 0.075; x is bismuth content) were not useful for the photocatalytic hydrogen evolution. The structural characterization suggested that the samples prepared with Na/Ta ratio close to unity, contain Bi ions located at both Na and Ta sites in the lattice. The Mott–Schottky plots revealed that the flat band potential of the pristine NaTaO₃ is highly negative to the H₂/H₂O reduction potential (−1.19 eV vs. SCE, pH = 7) and for all Bi doped NaTaO₃ samples, the flat band potential was sufficient for the hydrogen generation.     

Pd-Gardenia-TiO2 as a photocatalyst for H2 evolution from pure water

The photocatalytic activity for H₂ evolution from pure water over Pd loaded TiO₂ prepared by gardenia extract (Pd-Gardenia-TiO₂) is systematically investigated. The as-prepared photocatalysts are characterized by X-ray diffraction, high resolution transmission electron microscopy, Fourier transform infrared spectra, and X-ray photoelectron spectroscopy. Gardenia extract functions as reducing and stabilizing agents simultaneously. The mean size of the as-prepared Pd nanoparticles is in the range of 2.3 ± 0.5 nm based on TEM images. The Pd-Gardenia-TiO₂ catalyst exhibits good photocatalytic activity for H₂ evolution (93 μmol · h⁻¹ · g⁻¹), which is much higher than that of Pd photodeposited on TiO₂. Possible factors for its photocatalytic activity from pure water are also investigated.     

Tin-grafted TiO2 with enhanced activity for photocatalytic hydrogen generation from aqueous methanol solutions

A series of Sn-modified TiO₂ samples was prepared by an anhydrous grafting route and applied in the photocatalytic H₂ evolution from aqueous methanol solutions. The synthesized samples were characterized by N₂ physisorption, X-ray diffraction, Raman, UV–Vis reflectance and photoluminescence spectroscopy. The results revealed that the tin species were highly dispersed on the TiO₂ surface and did not alter its crystalline structure. Photocatalytic results showed that Sn-grafting led to a significant improvement in the activity compared to bare TiO₂ owing to the improved charge separation. The photocatalytic performance of samples was found to depend highly on the Sn content. Additionally, the influence of Rh co-modification on the photocatalytic activity of Sn-grafted TiO₂ was investigated, and a synergetic effect between Sn and Rh was identified, which is attributed to the assumed electron relay among TiO₂, tin species and photodeposited Rh nanoparticles.     

Fabrication of noble-metal-free Cd0.5Zn0.5S/NiS hybrid photocatalyst for efficient solar hydrogen evolution

Up to now, most of the semiconductor photocatalysts can only achieve their high photocatalytic activity for hydrogen production with the loading of noble metals, such as Pt or Ru, as cocatalysts, which drastically increases the total cost of the designed photocatalyst. Herein, we report the design and fabrication of a highly efficient Cd_0.5Zn_0.5S photocatalyst decorated with nanosized NiS surface heterojunctions. The hydrogen evolution rate over this photocatalyst reached 1.4 mmol/h, with a remarkable quantum yield of 33.9%. This efficiency is even much higher than many noble metal loaded photocatalysts. In this hybrid photocatalyst, the nanosized NiS on the surface can serve as electron trapping sites, by which, photogenerated electrons were extracted from Cd_0.5Zn_0.5S substrate, leading to spatially separated photoreduction and oxidation reactions. More interestingly, it was found that NiS played a similar role as noble metal, providing active sites for proton reduction, and hence efficiently enhancing the overall hydrogen production rate. Our work demonstrates the possibility of substitution of noble metal cocatalyst by a properly engineered surface hetero-junction to achieve efficient and low cost photocatalytic hydrogen production.     

Remarkable enhancement of photocatalytic hydrogen evolution over Cd0.5Zn0.5S by bismuth-doping

Bi³⁺ doped Cd_0.5Zn_0.5S photocatalysts were prepared by a simple hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscope (XPS), energy dispersive X-ray spectroscopy (EDX), BET and UV-Vis absorption spectroscope techniques. When Bi³⁺ doping content is lower, the doping ions lie at the surface lattice sites, whereas when the doping content is higher, the ions also enter the bulk lattice sites. Their photoactivities were evaluated by hydrogen evolution from aqueous solution containing Na₂S and Na₂SO₃ as a hole scavenger under visible light (λ ≥ 420 nm) irradiation. Bi³⁺ doping enhances markedly photocatalytic activity. When Bi³⁺ doping content is 0.10 mole %, the photocatalyst exhibits the highest activity, and the average apparent quantum yield amounts to 9.71% during 30 h irradiation. The possible mechanism was discussed.     

Solvothermal synthesis of SnNb2O6 nanoplates and enhanced photocatalytic H2 evolution under visible light

Well-defined SnNb₂O₆ nanoplates are synthesized here by a facile template-free solvothermal route in a mixed solvent of water and ethanol without an organic surfactant. The synthesized nanoplates have widths ranging from 200 to 400 nm and thicknesses in a range of 20–30 nm. The nanoplates were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV–Vis spectroscopy, Raman spectrometry, and by the Brunauer–Emmett–Teller method. The variation of the lattice parameters and the optical properties of the nanoplates were discussed in detail based on the crystal and electronic structure. The SnNb₂O₆ nanoplates exhibited greatly enhanced photocatalytic activity in terms of the reduction of water for H₂ generation under visible light irradiation as compared to the same compound prepared by a solid–state reaction method. This was mainly attributed to its higher surface area and extremely high two-dimensional anisotropy, which provided a short migration distance along the thickness direction.     

A green and facile synthesis of TiO2/graphene nanocomposites and their photocatalytic activity for hydrogen evolution

This work reports a green and facile approach to synthesize chemically bonded TiO₂/graphene sheets (GS) nanocomposites using a one-step hydrothermal method. The as-prepared composites were characterized by X-ray diffraction, transmission electron microscopy, Raman spectroscopy and ultraviolet visible (UV-Vis) diffuse reflectance spectra. The photocatalytic activity was evaluated by hydrogen evolution from water splitting under UV-Vis light illumination. An enhancement of photocatalytic hydrogen evolution was observed over the TiO₂/GS composite photocatalysts, as 1.6 times larger for TiO₂/2.0 wt%GS than that of Degussa P25. This fabrication process features the reduction of graphene oxide and formation of TiO₂ simultaneously leading to the well dispersion of generated TiO₂ nanoparticles on the surface of GS.     

A red La(OH)3/TiO2:B,N composite photocatalyst for broad-band visible-light-driven hydrogen evolution

A red La(OH)₃/TiO₂:B,N composite photocatalyst with broad-band visible-light-response was successfully synthesized through a three-step synthetic route. Structural, morphologic, optical and surface characteristics of the as-prepared photocatalysts were characterized by XRD, SEM, TEM, UV–vis, BET and XPS measurements. The 1.5% La added sample exhibited a high photocatalytic performance (48 μmol h⁻¹) in the presence of K₂CO₃ as the sacrificial agent under visible-light irradiation (λ > 400 nm), which is almost a 24-fold increase compared with the sample without La added.     

Influence of metal oxide on LiBH4/2LiNH2/MgH2 system for hydrogen storage properties

In this study, various nanoscale metal oxide catalysts, such as CeO₂, TiO₂, Fe₂O₃, Co₃O₄, and SiO₂, were added to the LiBH₄/2LiNH₂/MgH₂ system by using high-energy ball milling. Temperature programmed desorption and MS results showed that the Li–Mg–B–N–H/oxide mixtures were able to dehydrogenate at much lower temperatures. The order of the catalytic effect of the studied oxides was Fe₂O₃ > Co₃O₄ > CeO₂ > TiO₂ > SiO₂. The onset dehydrogenation temperature was below 70 °C for the samples doped with Fe₂O₃ and Co₃O₄ with 10 wt.%. More than 5.4 wt.% hydrogen was released at 140 °C. X-ray diffraction indicated that the addition of metal oxides inhibited the formation of Mg(NH₂)₂ during ball milling processes. It is thought that the changing of the ball milling products results from the interaction of oxide ions in metal oxide catalysts with hydrogen atoms in MgH₂. The catalytic effect depends on the activation capability of oxygen species in metal oxides on hydrogen atoms in hydrides.     

Photodeposition of amorphous MoSx cocatalyst on TiO2 nanosheets with {001} facets exposed for highly efficient photocatalytic hydrogen evolution

Semiconductor-based photocatalytic hydrogen production is a promising approach to convert solar energy to renewable and clean hydrogen energy. However, development of cheap and efficient hydrogen evolution cocatalyst to replace noble metal based cocatalysts remains a challenge. Here, we report a MoS_x/TiO₂ nanohybrid prepared by a facile photo-assisted deposition method. The amorphous MoS_x grows intimately on the single-crystalline TiO₂ nanosheet with {001} facets exposed to form a heterojunction, which can not only facilitate the charge separation and transfer, but also provide plenty of active sites for hydrogen evolution reaction owing to abundant unsaturated S atoms on amorphous MoS_x. As a result, the MoS_x/TiO₂ nanohybrid shows a remarkable enhancement in photocatalytic hydrogen evolution performance in comparison to bare TiO₂ nanosheet. The best 0.5%-MoS_x/TiO₂ nanohybrid exhibits a hydrogen production rate at 1835.7 μmol g^?1 h^?1 under Xenon light irradiation, which is about 177 times higher than that of bare TiO₂ nanosheet. This work paves a way for the design and construction of low-cost and noble-metal-free photocatalysts for efficient photocatalytic hydrogen evolution.     

Improving photocatalytic activity for hydrogen evolution over ZnIn2S4 under visible-light: A case study of rare earth modification

A series of rare earth (RE) ions (La³⁺, Ce³⁺, Gd³⁺, Er³⁺ or Y³⁺) modified ZnIn₂S₄ photocatalysts (RE-ZnIn₂S₄) were prepared using the hydrothermal method and characterized by various analysis techniques, such as UV–Vis diffusive reflectance spectroscopy, X-ray diffraction, scanning electron microscopy, Brunauer–Emmett–Teller surface analyzer, photoluminescence spectroscopy and X-ray photoelectron spectroscopy. The results indicated that the RE element exists as the oxide RE₂O₃ and their modification can reduce ZnIn₂S₄ crystallite size, inhibit ZnIn₂S₄ grain growth, promote ZnIn₂S₄ crystallite self-organization into a micro-sphere flower-like morphology, increase ZnIn₂S₄ surface area and total pore volume, and bring rich defects to ZnIn₂S₄. The photocatalytic activities of RE-ZnIn₂S₄ were evaluated based on photocatalytic hydrogen production from water under visible-light irradiation and the hydrogen production efficiency increased by 46%, 53%, 61%, 69%, and 106% after adding 2.0 wt% of Y, Gd, Er, Ce and La, respectively. The relationship between the photocatalytic activity of RE-ZnIn₂S₄ and the RE properties was discussed.