Hydrogen production by steam reforming of ethanol over an Ir/CeO2 catalyst: Reaction mechanism and stability of the catalyst

Steam reforming of ethanol over an Ir/CeO₂ catalyst has been studied with regard to the reaction mechanism and the stability of the catalyst. It was found that ethanol dehydrogenation to acetaldehyde was the primary reaction, and acetaldehyde was then decomposed to methane and CO and/or converted to acetone at low temperatures. Methane was further reformed to H₂ and CO, and acetone was directly converted into H₂ and CO₂. Addition of CO, CO₂, and CH₄ to the water/ethanol mixture proved that steam reforming of methane and the water gas shift were the major reactions at high temperatures. The Ir/CeO₂ catalyst displayed rather stable performance in the steam reforming of ethanol at 650 °C even with a stoichiometric feed composition of water/ethanol, and the effluent gas composition remained constant for 300 h on-stream. The CeO₂ in the catalyst prevented the highly dispersed Ir particles from sintering and facilitated coke gasification through strong Ir–CeO₂ interaction.     

From mechanistic to kinetic analyses of ethanol steam reforming over Ir/CeO2 catalyst

This work presents a kinetic analysis of ethanol steam reforming (ESR) over a performing Ir/CeO₂ catalyst based on a bi-functional mechanism. A first conventional power-law based kinetic study was carried out by varying the main operating parameters (temperature, steam/ethanol molar ratio and partial pressure of products). A limited fit was achieved between the experimental data and the data calculated from this model based on a single type of site, demonstrating the need of a kinetic analysis integrating more closely the demonstrated bi-functional mechanism of the reaction. A kinetic model considering two distinct adsorption sites, on ceria support and on iridium particles, was then considered and only reactions involving the two types of sites, i.e. occurring at the ceria/metal interface, were used to build that model. A good agreement between the experimental data and the model was obtained, without systematic deviations. The central role of the metal-support interface was also consistent with the deactivation of this catalyst upon sintering, related to both changes in metal and support dispersion with time on stream.     

Hydrogen production from ethanol steam reforming over Ir/CeO2 catalysts: Enhanced stability by PrOx promotion

We studied ethanol steam reforming over Ir/Ce_0.9Pr_0.1O₂ and Ir/CeO₂ catalysts comparatively with respect to activity and stability. We found that PrO_x-doping have significantly promoted the oxygen storage capacity and thermal stability of the catalysts by incorporation into the ceria lattice. Ethanol was readily converted to hydrogen, methane and carbon oxides at 773 K over the Ir/Ce_0.9Pr_0.1O₂ catalyst, and this is 100 K lower than that found for the Ir/CeO₂ catalyst. Moreover, the PrO_x-doped catalyst was stable toward ethanol steam reforming at 923 K for 300 h without an apparent variation in ethanol conversion and product distribution. However, the severe aggregation of ceria particles and heavy coke deposition were observed on the Ir/CeO₂ catalyst, resulting in remarkable deactivation under the same reaction conditions.     

Flowerlike microspheres catalyst NiO/La2O3 for ethanol-H2 production

Catalysts of nano-sized nickel oxide particles based on flowerlike lanthanum oxide microspheres with high disperse were prepared to achieve simultaneous dehydrogenation of ethanol and water molecules on multi-active sites. XRD, SEM, 77K N₂ adsorption were used to analyze and observe the catalysts’ structure, morphology and porosity. Catalytic parameters with respect to yield of H₂, activity, selectivity towards gaseous products and stability with time-on-stream and time-on-off-stream were all determined. This special morphology NiO/La₂O₃ catalyst represented more than 1000 h time-on-stream stability test and 500 h time-on-off-stream stability test for hydrogen fuel production from ethanol steam reforming at 300 °C without any deactivation. During the 1000 h time-on-stream stability test, ethanol–water mixtures could be converted into H₂, CO, and CH₄ with average selectivity values of 57.0, 20.1, 19.6 and little CO₂ of 3.2 mol%, respectively, and average ethanol conversion values of 96.7 mol%, with H₂ yield of 1.61 mol H₂/mol C₂H₅OH. During the 500 h time-on-off-stream stability test, ethanol–water mixtures could be converted into H₂, CO, CH₄ and CO₂ with average selectivity values of 65.1, 17.3, 15.1 and 2.5 mol%, respectively, and average ethanol conversion values of 80.0 mol%. For the ethanol-H₂ and petrolic hybrid vehicle (EH–HV), the combustion value is the most important factor. So, it was very suitable for the EH–HV application that the low temperature ethanol steam reforming products’ distribution was with high H₂, CO, CH₄ and very low CO₂ selectivity over the special NiO/La₂O₃ flowerlike microspheres.     

Hydrogen production from steam reforming of ethanol using a ceria-supported iridium catalyst: Effect of different ceria supports

Catalytic activity of a ceria-supported Iridium (Ir/CeO₂) catalyst was investigated for steam reforming of ethanol within a temperature range of 300–500 °C. Three types of ceria were chosen to prepare the catalyst: commercial [assigned as CeO₂(C)] and prepared [using a simple reduction–oxidation method, CeO₂(R), and another combined with ultrasonic irradiation, CeO₂(U)] ceria. The Ir/CeO₂ catalyst with Ir loading of 2 wt.% was prepared by deposition–precipitation using iridium chloride (IrCl₃) as a precursor at 75 °C and pH = 9 (adjusted with 0.25 M Na₂CO₃). Catalytic activities toward the steam reforming of ethanol (SRE) were tested in a fixed-bed reactor. In order to better understand the effect of activation conditions of a catalyst on the reforming of ethanol, reduction pretreatment at 200 and 400 °C (assigned as H₂ and H₄) were conducted. The results indicated that only less sintering influences the catalytic activities for high temperature reduction. The ethanol conversion approached completion around 450 °C via reduction pretreatment for Ir/CeO₂(U) and Ir/CeO₂(C) samples under H₂O/EtOH molar ratio of 13 and 22,000 h⁻¹ GHSV. Not only was a high dispersion of both catalysts present but also no impurities (e.g., boron) interfered with the catalytic activities. The hydrogen yield (H₂ mole/EtOH mole) exceeds 5.0 with less content of CO and CH₄ (<2%).     

Hydrogen production by oxidative steam reforming of methanol over Ni/CeO2–ZrO2 catalysts

Single ZrO₂ and mixed CeO₂-ZrO₂ oxides with different CeO₂/ZrO₂ ratios were prepared by the sol-gel method and the CeO₂ by precipitation. The prepared support were impregnated with an aqueous solution of NiCl₂·6H₂O at an appropriate concentration to yield 3 wt.% of nickel respectively in the catalysts. Catalytic materials were characterized by BET (N₂ adsorption-desorption), SEM-EDS, XRD and TPR. The oxidative steam reforming of methanol (OSRM) reaction was investigated on these catalysts for H₂ production as a function of temperature. Depending of the CeO₂/ZrO₂ ratio; the catalysts composition has a significant influence on the surface area (BET), reduction properties and methanol conversion. XRD patterns of the Ni-base catalysts showed well defined diffraction peaks of the metallic Ni except on the Ni/CeO₂ catalyst, suggesting that on this sample all of the active phase was highly dispersed. Ni/Ceria-rich catalysts were vastly active for OSRM, giving a total CH₃OH conversion at 325 °C with GHSV = 0.3 × 10⁵ h⁻¹. They also showed close selectivity toward H₂, with high selectivity to CO₂ in all range of temperatures, this suggests that the reverse WGS reaction does not occur on these samples. It seems that the nickel is the phase mainly responsible of hydrogen production although the CeO₂/ZrO₂ support reduces the CO formation.     

Oxidative steam reforming of methanol over CuO/ZnO/CeO2/ZrO2/Al2O3 catalysts

The composition (CuO/ZnO/Al₂O₃ = 30/60/10) of a commercial catalyst G66B was used as a reference for designing CuO/ZnO/CeO₂/ZrO₂/Al₂O₃ catalysts for the oxidative (or combined) steam reforming of methanol (OSRM). The effects of Al₂O₃, CeO₂ and ZrO₂ on the OSRM reaction were clearly identified. CeO₂, ZrO₂ and Al₂O₃ all promoted the dispersions of CuO and ZnO in CuO/ZnO/CeO₂/ZrO₂/Al₂O₃ catalysts. Aluminum oxide lowered the reducibility of the catalyst, and weakened the OSRM reaction. Cerium oxide increased the reducibility of the catalyst, but weakened the reaction. Zirconium oxide improved the reducibility of the catalyst, and promoted the reaction. A lower CuO/ZnO ratio of the catalyst was associated with greater promotion of ZrO₂. The critical CuO/ZnO ratio for the promotion of ZrO₂ was approximately 0.75–0.8. Introducing of ZrO₂ into CuO/ZnO/Al₂O₃ also improved the stability of the catalyst. Although Al₂O₃ inhibited the OSRM reaction, a certain amount of it was required to ensure the stability and the mechanical strength of the catalysts.     

Steam reforming and oxidative steam reforming of methanol over CuO–CeO2 catalysts

Steam reforming (SRM) and oxidative steam reforming of methanol (OSRM) were carried out over a series of coprecipitated CuO–CeO₂ catalysts with varying copper content in the range of 30–80 at.% Cu (= 100 × Cu/(Cu + Ce)). The effects of copper content, reaction temperature and O₂ concentration on catalytic activity were investigated. The activity of CuO–CeO₂ catalysts for SRM and OSRM increased with the copper content and 70 at.% CuO–CeO₂ catalyst showed the highest activity in the temperature range of 160–300 °C for both SRM and OSRM. After SRM or OSRM, the copper species in the catalysts observed by XRD were mainly metallic copper with small amount of CuO and Cu₂O, an indication that metallic copper is an active species in the catalysis of both SRM and OSRM. It was observed that the methanol conversion increased considerably with the addition of O₂ into the feed stream, indicating that the partial oxidation of methanol (POM) is much faster than SRM. The optimum 70 at.% CuO–CeO₂ catalyst showed stable activities for both SRM and OSRM reactions at 300 °C.     

Nanocomposite Ni/ZrO2: Highly active and stable catalyst for H2 production via cyclic stepwise methane reforming reactions

This work investigates the catalytic performance of nanocomposite Ni/ZrO₂-AN catalyst consisting of comparably sized Ni (10–15 nm) and ZrO₂ (15–25 nm) particles for hydrogen production from the cyclic stepwise methane reforming reaction with either steam (H₂O) or CO₂ at 500–650 °C, in comparison with a conventional Ni/ZrO₂-CP catalyst featuring Ni particles supported by large and widely sized ZrO₂ particles (20–400 nm). Though both catalysts exhibited similar activity and stability during the reactions at 500 and 550 °C, they showed remarkably different catalytic stabilities at higher temperatures. The Ni/ZrO₂-CP catalyst featured a significant deactivation even during the methane decomposition step in the first cycle of the reactions at ≥600 °C, but the Ni/ZrO₂-AN catalyst showed a very stable activity during at least 17 consecutive cycles in the cyclic reaction with steam. Changes in the catalyst beds at varying stages of the reactions were characterized with TEM, XRD and TPO–DTG and were correlated with the amount and nature of the carbon deposits. The Ni particles in Ni/ZrO₂-AN became stabilized at the sizes of around 20 nm but those in Ni/ZrO₂-CP kept on growing in the methane decomposition steps of the cyclic reaction. The small and narrowly sized Ni particles in the nanocomposite Ni/ZrO₂-AN catalyst led to a selective formation of filamentous carbons whereas the larger Ni particles in the Ni/ZrO₂-CP catalyst a preferred formation of graphitic encapsulating carbons. The filamentous carbons were favorably volatilized in the steam treatment step but the CO₂ treatment selectively volatilized the encapsulating carbons. These results identify that the nature but not the amount of carbon deposits is the key to the stability of Ni/ZrO₂ catalyst and that the nanocomposite Ni/ZrO₂-AN would be a promising catalyst for hydrogen production via cyclic stepwise methane reforming reactions.     

Photocatalytic reforming of ethanol to H2 and CH4 over ZnSn(OH)6 nanocubes

ZnSn(OH)₆ nanocubes (ZHS) were synthesized by solvothermal method and then characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), N₂ sorption (BET surface area), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Photocatalytic reforming of ethanol for H₂ production over ZHS samples were investigated and compared under different reaction conditions. The results indicated that the cubes were formed by the adsorption of small irregular ZHS particles via the Ostwald ripening process. ZHS showed high photoactivity for reforming ethanol to H₂ and CH₄. The H₂ evolution rate of ZHS was found more susceptible to the crystallinity of the samples than the surface area, and could be significantly enhanced by loading with Pt.     

Preferential oxidation of CO in H2 stream on Au/CeO2–TiO2 catalysts

A series of Au catalysts supported on CeO₂–TiO₂ with various CeO₂ contents were prepared. CeO₂–TiO₂ was prepared by incipient-wetness impregnation with aqueous solution of Ce(NO₃)₃ on TiO₂. Gold catalysts were prepared by deposition–precipitation method at pH 7 and 65 °C. The catalysts were characterized by XRD, TEM and XPS. The preferential oxidation of CO in hydrogen stream was carried out in a fixed bed reactor. The catalyst mainly had metallic gold species and small amount of oxidic Au species. The average gold particle size was 2.5 nm. Adding suitable amount of CeO₂ on Au/TiO₂ catalyst could enhance CO oxidation and suppress H₂ oxidation at high reaction temperature (>50 °C). Additives such as La₂O₃, Co₃O₄ and CuO were added to Au/CeO₂–TiO₂ catalyst and tested for the preferential oxidation of CO in hydrogen stream. The addition of CuO on Au/CeO₂–TiO₂ catalyst increased the CO conversion and CO selectivity effectively. Au/CuO–CeO₂–TiO₂ with molar ratio of Cu:Ce:Ti = 0.5:1:9 demonstrated very high CO conversion when the temperature was higher than 65 °C and the CO selectivity also improved substantially. Thus the additive CuO along with the promoter and amorphous oxide ceria and titania not only enhances the electronic interaction, but also stabilizes the nanosize gold particles and thereby enhancing the catalytic activity for PROX reaction to a greater extent.     

Co and Ni supported on CeO2 as selective bimetallic catalyst for dry reforming of methane

Co/CeO₂ (Co 7.5 wt.%), Ni/CeO₂ (Ni 7.5 wt.%) and Co–Ni/CeO₂ (Co 3.75 wt.%, Ni 3.75 wt.%) catalysts were prepared by surfactant assisted co-precipitation method. Samples were characterized by X-Ray diffraction, BET surface areas measurements, temperature programmed reduction and tested for the dry reforming of methane CH₄ + CO₂ → 2CO + 2H₂ in the temperature range 600–800 °C with a CH₄:CO₂:Ar 20:20:60 vol.% feed mixture and a total flow rate of 50 cm³ min⁻¹ (GHSW = 30,000 mL g⁻¹ h⁻¹). The bimetallic Co–Ni/CeO₂ catalyst showed higher CH₄ conversion in comparison with monometallic systems in the whole temperature range, being 50% at 600 °C and 97% at 800 °C. H₂/CO selectivity decreased in the following order: Co–Ni/CeO₂ > Ni/CeO₂ > Co/CeO₂. Carbon deposition on spent catalysts was analyzed by thermal analysis (TG-DTA). After 20 h under stream at 750 °C, cobalt-containing catalysts, Co/CeO₂ and Co–Ni/CeO₂, showed a stable operation in presence of a deposited amorphous carbon of 6 wt.%, whereas Ni/CeO₂ showed an 8% decrease of catalytic activity due to a massive presence of amorphous and graphitic carbon (25 wt.%).     

Reaction pathway for ethanol steam reforming on a Ni/SiO2 catalyst including coke formation

The effect operating conditions (temperature, space time, steam/ethanol molar ratio, ethanol partial pressure and time on stream) have on the activity and stability of a Ni/SiO₂ catalyst for H₂ production by ethanol steam reforming has been studied in a fluidized bed reactor. This catalyst allows obtaining total conversion above 500 °C, with a steam/ethanol molar ratio of 6 and a space time of 0.138 g_catalysth/g_ethanol. Catalyst deactivation in the 300–500 °C range is due to coke deposition, whose nature (determined by TPH and TPO analysis) mainly depends on reaction temperature. The coke deposited at 300 °C is amorphous and blocks metallic sites, whereas at higher temperatures the coke is mainly filamentous and, although its content increases as reaction temperature is raised to 500 °C, it has a low effect on catalyst deactivation because it does not block metal sites. Above 600 °C the decrease in coke content due to gasification is noticeable, although at this temperature an incipient Ni sintering is observed, which is significant at 700 °C.     

CO2 reforming of methane combined with steam reforming or partial oxidation of methane to syngas over NdCoO3 perovskite-type mixed metal-oxide catalyst

CO₂ reforming with simultaneous steam reforming or partial oxidation of methane to syngas over NdCoO₃ perovskite-type mixed metal oxide catalyst (prereduced by H₂) at different process conditions has been investigated. In the simultaneous CO₂ and steam reforming, the conversion of methane and H₂O and also the H₂/CO product ratio are strongly influenced by the CO₂/H₂O feed-ratio. In the simultaneous CO₂ reforming and partial oxidation of methane, the conversion of methane and CO₂, H₂ selectivity and the net heat of reaction are strongly influenced by the process parameters (viz. temperature, space velocity and relative concentration of O₂ in the feed). In both cases, no carbon deposition on the catalyst was observed. The reduced NdCoO₃ perovskite-type mixed-oxide catalyst (Co dispersed on Nd₂O₃) is a highly promising catalyst for carbon-free CO₂ reforming combined with steam reforming or partial oxidation of methane to syngas.     

Comparative study of CeO2/CuO and CuO/CeO2 catalysts on catalytic performance for preferential CO oxidation

The CeO₂/CuO and CuO/CeO₂ catalysts were synthesized by the hydrothermal method and characterized via XRD, SEM, H₂-TPR, HRTEM, XPS and N₂ adsorption–desorption techniques. The study shows that the rod-like structure is self-assembled CeO₂, and both hydrothermal time and Ce/Cu molar ratio are important factors when the particle-like CeO₂ is being self-assembled into the rod-like CeO₂. The CuO is key active component in the CO-PROX reaction, and its reduction has a negative influence on the selective oxidation of CO. The advantage of the inverse CeO₂/CuO catalyst is that it still can provide sufficient CuO for CO oxidation before 200 °C in the hydrogen-rich reductive gasses. The traditional CuO/CeO₂ catalyst shows better activity at lower temperature and the inverse CeO₂/CuO catalysts present higher CO₂ selectivity when the CO conversion reaches 100%. The performance of mixed sample verifies that they might be complementary in the CO-PROX system.     

Catalytic properties of Ag promoted ZnO/Al2O3 catalysts for hydrogen production by steam reforming of ethanol

Ag promoted ZnO/Al₂O₃ catalysts were prepared by using the incipient wetness impregnation method. The catalytic properties of steam reforming reaction for hydrogen production on the prepared catalysts were evaluated with H₂O:C₂H₅OH molar ratios of 3:1 at 450 °C and atmospheric pressure. Ag promoted ZnO/Al₂O₃ catalysts show higher SRE catalytic activity than ZnO/Al₂O₃ catalysts. H₂ and CH₃CHO are the major products on Ag promoted catalysts, and C₂H₄ is also produced probably due to acid sites on Al₂O₃. SRE mechanism on Ag promoted ZnO/Al₂O₃ catalysts, which contains C-C scission, is different from that on ZnO/Al₂O₃ catalysts. A method based on thermogravimetry (TG), differential scanning calorimetry (DSC) and mass spectrometry (MS) was used to analysis the coking behavior on catalyst surface. The surfaces of Ag promoted ZnO/Al₂O₃ catalysts show two different types of coking, and suffer higher coke deposition during the steam reforming reaction.     

Redox cycling of CuFe2O4 supported on ZrO2 and CeO2 for two-step methane reforming/water splitting

CuFe₂O₄ supported on ZrO₂ and CeO₂ for two-step methane reforming was evaluated to determine if it could enhance the reactivity, CO selectivity and thermal stability of CuFe₂O₄. Two-step methane reforming consists of a syngas production step and a water splitting step. CuFe₂O₄ supported on ZrO₂ and CeO₂ was prepared using an aerial oxidation method. Non-isothermal methane reduction was carried out on TGA to compare the reactivity of CuFe₂O₄/ZrO₂ and CuFe₂O₄/CeO₂. In addition, a syngas production step was performed at 900 °C and water splitting was conducted at 800 °C alternatively five times to compare the methane conversion, CO selectivity, cycle ability and hydrogen production by water splitting in a fixed bed reactor. If the 1st syngas production step results are excluded due to over-oxidation, CuFe₂O₄/ZrO₂ and CuFe₂O₄/CeO₂ showed approximately 74.0–82.8% and 60.3–87.5% methane conversion, respectively, and 44.0–47.8% and 65.2–81.5% CO selectivity, respectively. Using CeO₂ and ZrO₂ as supports effectively improved the reactivity and methane conversion compared to CuFe₂O₄. CuFe₂O₄/ZrO₂ showed high methane conversion due to the high phase stability and thermal stability of ZrO₂ but the selectivity was not improved. After 5 successive cycles, the CeFeO₃ phase was found on CuFe₂O₄/CeO₂. Furthermore, methane conversion, CO selectivity and the amounts of hydrogen production of CuFe₂O4/CeO₂ increased with increasing number of cycles. Additional test up to the 11th cycle on CuFe₂O₄/CeO₂ revealed that CeO₂ is a better support that ZnO₂ in terms of the reactivity and CO selectivity.     

High yield hydrogen production from low CO selectivity ethanol steam reforming over modified Ni/Y2O3 catalysts at low temperature for fuel cell application

Ethanol–water mixtures were converted directly into H₂ with 67.6% yield and >98% conversion by catalytic steam reforming at 350 °C over modified Ni/Y₂O₃ catalysts heat treated at 500 °C. XRD was used to test the structure and calculate the grain sizes of the samples with different scan rates. The initial reaction kinetics of ethanol over modified and unmodified Ni/Y₂O₃ catalysts were studied by steady state reaction and a first-order reaction with respect to ethanol was found. TPD was used to analyze mechanism of ethanol desorption over Ni/Y₂O₃ catalyst. Rapid vaporization, efficiency tube reactor and catalyst were used so that homogeneous reactions producing carbon, acetaldehyde, and carbon monoxide could be minimized. And even no CO detective measured during the first 49 h reforming test on the modified catalyst Ni/Y₂O₃. This process has great potential for low cost H₂ generation in fuel cells for small portable applications where liquid fuel storage is essential and where systems must be small, simple, and robust.     

Enhanced ethanol steam reforming by CO2 absorption using CaO,CaO*MgO or Na2ZrO3

This paper presents results of thermodynamic analysis and experimental evaluation of hydrogen production by steam reforming of ethanol (SRE) combined with CO₂ absorption using a mixture of a solid absorbent (CaO, CaO*MgO and Na₂ZrO₃) and a Ni/Al₂O₃ catalyst. Thermodynamic analysis results indicate that a maximum of 69.5% H₂ (dry basis) is feasible at 1 atm, H₂O/C₂H₅OH = 6 (molar ratio) and T = 600 °C. whereas, the addition of a CO₂ absorbent at 1 atm, T = 600 °C and H₂O/C₂H₅OH/Absorbent = 6:1:2.5, produced a H₂ concentration of 96.6, 94.1, and 92.2% using CaO, CaO*MgO, and Na₂ZrO₃, respectively. SRE experimental evaluation achieved a maximum of 60% H₂. While combining SRE and a CO₂ absorbent exhibited a concentration of 96, 94, and 90% employing CaO, CaO*MgO, and Na₂ZrO₃, respectively at 1 atm, T = 600 °C, SV = 414 h⁻¹ and H₂O/C₂H₅OH/absorbent = 6:1:2.5 (molar ratio).