TiO2, TiO2/Ag and TiO2/Au photocatalysts prepared by spray pyrolysis

TiO₂, TiO₂/Ag and TiO₂/Au photocatalysts exhibiting a hollow spherical morphology were prepared by spray pyrolysis of aqueous solutions of titanium citrate complex and titanium oxalate precursors in one-step. Effects of precursor concentration and spray pyrolysis temperature were investigated. By subsequent heat treatment, photocatalysts with phase compositions from 10 to 100% rutile and crystallite sizes from 12 to 120 nm were obtained. A correlation between precursor concentration and size of the hollow spherical agglomerates obtained during spray pyrolysis was established. The anatase to rutile transformation was enhanced with metal incorporations and increased precursor concentration. The photocatalytic activity was evaluated by oxidation of methylene blue under UV-irradiation. As-prepared TiO₂ particles with large amounts of amorphous phase and organic residuals showed similar photocatalytic activity as the commercial Degussa P25. The metal incorporated samples showed comparable photocatalytic activity to the pure TiO₂ photocatalysts.     

The influence of the crystal structure of TiO2 support material on Pd catalysts for formic acid electrooxidation

The influence of the crystal structure of TiO₂ support material on Pd catalyst-mediated formic acid electrooxidation was investigated. Pd/TiO₂ catalysts were synthesized by loading Pd on TiO₂ with different crystal structures obtained by calcinations at different temperatures. Electrochemical tests showed that TiO₂ with the rutile structure improved the catalytic activity of Pd nanoparticles toward formic acid electrooxidation. Physicochemical and electrochemical characterizations revealed that the enhancement of Pd/TiO₂ (rutile) catalytic activity arose from uniform dispersion of Pd nanoparticles, an increase in surface-active sites, and good tolerance to the adsorption of poisonous intermediates (such as CO_ad, COOH_ad and so on).     

Pd nanoparticles supported on carbon-modified rutile TiO2 as a highly efficient catalyst for formic acid electrooxidation

In this article, Pd nanoparticles supported on carbon-modified rutile TiO₂ (CMRT) as a highly efficient catalyst for formic acid electrooxidation were investigated. Pd/CMRT catalyst was synthesized by using liquid phase reduction method in which Pd nanoparticles was loaded on the surface of CMRT obtained through a chemical vapor deposition (CVD) process. Pd/CMRT shows three times the catalytic activity of Pd/C, as well as better catalytic stability towards formic acid electrooxidation. The enhanced catalytic property of Pd/CMRT mainly arises from the improved electronic conductivity of carbon-modified rutile TiO₂, the dilated lattice constant of Pd nanoparticles, an increasing of surface steps and kinks in the microstructure of Pd nanoparticles and slightly better tolerance to the adsorption of poisonous intermediates.     

Excellent antimicrobial properties of mesoporous anatase TiO2 and Ag/TiO2 composite films

Optically transparent, crack-free, mesoporous anatase TiO₂ thin films were fabricated. The Ag/TiO₂ composite films were prepared by incorporating Ag in the pores of TiO₂ films with an impregnation method via photoreduction. The as-prepared composite films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectronic spectra (XPS) and N₂ adsorption. The release behavior of silver ions in the mesoporous composite film was also studied. Moreover, the antimicrobial behaviors of the mesoporous film were also investigated by confocal laser scanning microscopy. The antibacterial activities of the composite films were studied by a fluorescence label method using Escherichia coli (E. coli) as a model. The as-prepared mesoporous TiO₂ films showed much higher antimicrobial efficiency than that of glass and commercial P25 TiO₂ spinning film. The facts would result from the high surface area, small crystal size and more active sites for the mesoporous catalysis. After the doping of Ag, a significant improvement for the antimicrobial ability was obtained. To elucidate the roles of the membrane photocatalyst and the doped silver in the antimicrobial activity, cells from a silver-resistant E. coli were used. These results indicated that Ag nanoparticles in the mesoporous were not only an antimicrobial but also an intensifier for photocatalysis. The as-prepared mesoporous composite film is promising in application of photocatalysis, antimicrobial and self-clean technologies.     

Facile synthesis of mesoporous Ag-loaded TiO2 thin film and its photocatalytic properties

Ag nanoparticles highly dispersed into TiO₂ thin films are synthesized via a remarkably simple one-pot route in the presence of a P123 triblock copolymer as template directing and reducing agents, where the reduction of Ag⁺ to Ag⁰ by in situ heat-induced reduction through the oxidation of template at 400 °C and the controlled polymerization of TiO₂ take place simultaneously. The obtained mesoporous Ag/TiO₂ films deposited on soda-lime glass were optically transparent and crack-free. SEM and Kr adsorption clearly prove that Ag/TiO₂ films at different Ag contents are mesoporous with large surface area and regularly ordered mesopores and the thickness of the obtained films is ∼280 ± 20 nm. The pristine TiO₂ film exhibits a specific surface area of 63 cm²/cm² and specific pore volume of 0.013 mm³/cm² that it is decreased to 42 cm²/cm² and 0.010 mm³/cm² respectively as a result of Ag-loaded mesoporous TiO₂. The newly prepared photocatalysts Ag/TiO₂ films were evaluated for their photocatalytic degradation of 2-chlorophenol as a model reaction. It was found that the meso-ordered Ag/TiO₂ films are more photoactive 8 times than nonporous commercial photocatalysts Pilkington Glass Activ™. The recycling tests indicated that Ag/TiO₂ films was quite stable during that liquid-solid heterogeneous photocatalysis since no significant decrease in activity was observed even after being used repetitively for 10 times, showing a good potential in practical application. In general, the cubic mesoporous Ag/TiO₂ nanocomposites are stable and can be recycled without loss of their photochemical activity.     

Properties of sol-gel SnO2/TiO2 electrodes and their photoelectrocatalytic activities under UV and visible light illumination

A visible light active binary SnO₂-TiO₂ composite was successfully prepared by a sol-gel method and deposited on Ti sheet as a photoanode to degrade orange II dye. Titanium and SnO₂ can promote the development of rutile phase of TiO₂ and inhibit the formation of anatase phase of TiO₂. Formation of SnO₂ crystalline is insignificant even when the calcination temperature increases to 700 °C. Heterogenized interface between SnO₂ and TiO₂ inhibits growth of TiO₂ linkage and leads to the particle-filled surface morphology of SnO₂-containing films. The carbonaceous, Ti-O-C bonds and Ti³⁺ species are likely to account for the photoabsorption and photoelectrocatalytic (PEC) activity under visible light illumination. The electrode with 30% SnO₂ exhibits higher photocurrent when compared with those in the region of 0-50%. The 600 °C-calcined SnO₂-TiO₂ electrode indicates higher activity when compared with those at 400, 500, 700 and 800 °C. PEC degradation of orange II follows the Langmuir-Hinshelwood model and takes place much effectively in a solution of pH 3.0 than those in pH 7.0 and pH 11.0.     

Effect of annealing on the phase transition and morphology of Ag NPs on/in TiO2 rods synthesized by a polyol method

In this study, we report the effect of annealing (250–700 ^oC) on the phase transition and morphology of silver (Ag) nanoparticles (NPs) on/in titanium dioxide (TiO₂) rods prepared using a polyol method. The annealed samples showed not only morphological change, i.e., a solid-to-liquid (melting) transition of Ag NPs due to its partial dissolution into the TiO₂ rods, but also early stage anatase crystallization and anatase–rutile transformation of TiO₂ rods under low annealing temperatures. Such findings, together with XRD and FE-SEM analyses, confirm that, upon higher annealing treatment, diffusion and coalescence leads to changes in the size and shape of the metal particles not only in the outermost regions, but also a random distribution and progressive growth of Ag clusters in the inner interface region. Here, it was shown that annealing can induce changes in morphology, as well as the chemical state and structure of Ag–TiO₂. The present polyol-synthesized Ag–TiO₂ composite also showed improved thermal stability.     

Photocatalytic conversion of benzene to phenol using modified TiO2 and polyoxometalates

The application of photocatalytic reactions to organic synthesis has attracted interests in view of the development of environmentally benign synthetic processes. This study investigated the effects of various parameters (electron acceptor, surface modification, and the combination of photocatalysts) on the direct synthesis of phenol from benzene using photocatalytic oxidation processes. The OH radicals generated on UV-illuminated TiO₂ photocatalyst directly hydroxylate benzene to produce phenol, hydroquinone, and catechol. The addition of Fe³⁺, H₂O₂, or Fe³⁺ + H₂O₂ highly enhanced the phenol production yield and selectivity in TiO₂ suspension. Surface modifications of TiO₂ had significant influence on the phenol synthetic reaction. Depositing Pt nanoparticles on TiO₂ (Pt/TiO₂) markedly enhanced the yield and selectivity. Surface fluorination of TiO₂ (F-TiO₂) increased the phenol yield two-fold because of the enhanced production of mobile (free) OH radicals on F-TiO₂. Polyoxometalate (POM) in phenol synthesis played the dual role both as a homogeneous photocatalyst and as a reversible electron acceptor in TiO₂ suspension. POM alone was as efficient as TiO₂ alone in the phenol production. In particular, the addition of POM to the TiO₂ suspension increased the phenol yield from 2.6% to 11% (the highest yield obtained in this study). Reaction mechanisms for each photocatalytic system were discussed in relation to the phenol synthesis.     

Influence of flame conditions on the dispersion of Pd on the flame spray-derived Pd/TiO2 nanoparticles

The Pd/TiO₂ nanoparticles containing 5 wt.% Pd were synthesized by one-step flame spray pyrolysis (FSP) under different flame conditions. As revealed by both X-ray diffraction (XRD) and transmission electron microscopy (TEM) results, the average particle sizes of Pd/TiO₂ were increased from 9.7 to 24.6 nm with increasing the precursor concentration and the feed flow rate as well as reduction of the O₂ dispersing gas during FSP synthesis. Although the BET surface area and %anatase phase content were decreased with increasing Pd/TiO₂ particle size, %Pd dispersion as determined from the amounts of CO chemisorption were higher on the larger size FSP-made Pd/TiO₂ nanoparticles. It is suggested that the shorter residence time in flame and/or the lower combustion energy (enthalpy density) resulted in more coverage of Pd surface by the formation of Ti-O groups, rendering lower CO chemisorption ability of the smaller size Pd/TiO₂.     

Influence of TiO2 and CeO2 on the hydrogenation activity of bulk Ni2P

TiO₂- and CeO₂-promoted bulk Ni₂P catalysts were prepared by impregnation and in-situ H₂ temperature-programmed reduction method. The prepared catalysts were characterized by XRD and XPS. The hydrogenation activities of the catalysts were studied using 1.5 wt.% 1-heptene in toluene and 1.0 wt.% phenylacetylene in ethanol as the model feeds. The results indicate that bulk Ni₂P possesses low hydrogenation activity but is tunable by simply controlling the content of the additives (TiO₂ or CeO₂), suggesting that TiO₂ and CeO₂ are effective promoters to enhance the hydrogenation activity of Ni₂P.     

甘油中水合TiO2及不同晶型纳米TiO2光致变色现象

系统地研究了甘油中水合TiO₂及不同晶型纳米TiO₂的光致变色现象。实验结果显示无定型水合TiO₂具有最明显的变色行为,锐钛型纳米TiO₂变色程度次之,金红石型纳米TiO2没有明显变色现象发生,混晶型(金红石和锐钛)纳米TiO₂的变色程度介于金红石型和锐钛型之间。XPS结果表明TiO₂的光致变色是由Ti³⁺引起的。从电子-空穴对复合率影响Ti ³⁺形成的角度对实验现象作出了详细解释,电子-空穴对复合率越高,Ti³⁺形成率越低,从而变色程度越浅;并运用双注入机制和小极子模型阐述了不同晶型TiO₂的光致变色机理。分析了甘油环境对TiO₂光致变色现象的影响,得出甘油对TiO₂的光致变色行为有促进作用。     

The studies on the Friedel-Crafts acylation of toluene with acetic anhydride over HPW/TiO2

P-methyl acetephenone synthesis from toluene and acetic anhydride over HPW(H₃PW₁₂O₄₀)/TiO₂ was carefully studied, and catalysts were characterized by BET, XRD and NH₃-TPD. The characterized results displayed that the interaction between HPW and TiO₂ prevented the loss of acidic protons from HPW to form the weak Lewis acid sites over HPW/TiO₂. The weak acid sites over HPW/TiO₂ came into being in case of much more HPW being loaded onto TiO₂ or HPW/TiO₂ being calcined at high temperature. The reaction results suggest that p-methyl acetephenone yield and selectivity depended on the acidity of catalysts, and the appearance of weak Lewis acid sites over HPW/TiO₂ resulted in p-methyl acetephenone yield decline.     

CO hydrogenation to iso-C4 hydrocarbons over CeO2–TiO2 catalysts

CeO₂–TiO₂ (Ce:Ti = 0.25–9, molar ratio) catalysts were synthesized by a sol–gel method and the catalytic performances were evaluated in the selective synthesis of isobutene and isobutane from CO hydrogenation under the reaction conditions of 673–748 K, 1–5 MPa and 720–3000 h⁻¹. The physical properties, such as specific surface area, cumulative pore volume, average pore diameter, crystal phase and size, of the catalysts were characterized by N₂ adsorption/desorption and XRD. All the CeO₂–TiO₂ composite oxides showed higher surface areas than pure TiO₂ and CeO₂. No TiO₂ phase was detected on the samples of CeO₂–TiO₂ in which TiO₂ contents were in the range of 10–50 mol%. Crystalline Ce₂O₃ was detected in CeO₂–TiO₂ (8:2). The reaction conditions, temperature, pressure and space velocity, had obvious influences on the CO conversion and distribution of the products over CeO₂–TiO₂ (8:2) catalyst.     

Enhanced visible light-induced photoelectrocatalytic degradation of phenol by carbon nanotube-doped TiO2 electrodes

We used a modified sol-gel method to prepare titanium dioxide and multi-walled carbon nanotube (CNT) composites that we subsequently deposited onto indium tin oxide (ITO) conductive glass plates. We characterized these CNT-doped TiO₂ (CNT-TiO₂) films using X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and diffuse reflectance UV-vis spectroscopy. The photoelectrocatalytic (PEC) activity of the composites was evaluated through their ability to mediate the degradation of phenol. XRD measurements indicated that the TiO₂ component existed solely in the anatase phase and that the crystallinity of the CNTs was low. XPS indicated that carbon atoms could substitute for both oxygen and titanium atoms in the TiO₂ lattice to form Ti-C and Ti-O-C structures, which were responsible for the extra photoabsorption and PEC activity under illumination with visible light, in addition to those provided by the CNTs and carbonaceous and Ti³⁺ species. An interphase interaction between TiO₂ and the CNTs elevated the photoabsorbance of the composites in the visible light region. A sample of TiO₂ doped with 10% CNTs and calcined at 400 °C exhibited the highest photocurrent and PEC efficiency. We systematically investigated the effects of several parameters of the PEC process, including the applied potential and pH, on the phenol conversion.     

Effect of TiO2 on phase evolution and microstructure of MgAl2O4 spinel in different atmospheres

The effect of TiO₂ on the formation and microstructure of magnesium aluminate spinel (MgAl₂O₄) at 1600 °C in air and reducing conditions were investigated. Under reducing conditions, stoichiometric MgAl₂O₄ spinel shifted toward alumina-rich types owing to volatilization of MgO, resulting in an increase in the porosity of fired samples. Addition of graphite to mixtures of MgO and Al₂O₃ intensified the reducing conditions and accelerated the formation of non-stoichiometric MgAl₂O₄. For TiO₂-containing samples on addition of MgAl₂O₄, magnesium aluminum titanium oxide (Mg_xAl_2(1−x)Ti_(1+x)O₅, x = 0.2 or 0.3) was detected as a minor phase. Under reducing conditions, XRD peak shifts were smaller for TiO₂-containing samples than for samples without TiO₂ owing to the formation of a solid solution of TiO₂ in MgAl₂O₄ and establishment of alumina-rich spinel, which have opposite effects on increasing the lattice parameter. In bauxite-containing samples, MgAl₂O₄ spinel, corundum, magnesium orthotitanate spinel (Mg₂TiO₄) and amorphous phases were identified. Mg₂TiO₄ spinel formed a complete solid solution with MgAl₂O₄ spinel but Mg₂TiO₄ remained as a distinct phase owing to the heterogeneous microstructure of bauxite-containing samples. Also dense microstructure established in air fired TiO₂ containing samples. The results are discussed with emphasis on the application and design of alumina-magnesia-carbon refractory materials, which are used in the steel industry.     

Preparation of TiO2-enriched CaCu3Mn0.1Ti3.9O12 ceramics and their dielectric properties

TiO₂-enriched CaCu₃(Mn_0.1Ti_3.9)O₁₂ (CCMTO) ceramics have been prepared by a two-step method. X-ray diffraction (XRD) and TEM results indicate that TiO₂ particles were partially coated on the surface of CCMTO powders. The dielectric spectra of TiO₂-enriched CCMTO samples showed that the dielectric constant was almost independent of the measured frequency and the dielectric loss was markedly suppressed by increasing the addition of TiO₂. The grain activation energy was calculated and an increase in energy was observed with the addition of TiO₂. This transformation gave influence to grain charge mobility and resulted in transformed dielectric behaviors.     

Tailoring high-surface-area nanocrystalline TiO2 polymorphs for high-power Li ion battery electrodes

The crystallization and morphology of brookite and anatase titania (TiO₂) were controlled using the urea-mediated hydrolysis/precipitation route in the presence of the Ti³⁺ ions. Without the strong complexing agents and the non-hydrothermal conditions, simple alterations to the urea concentration led to the synthesis from brookite nanorods to anatase nanoflowers at a low temperature below 100 °C, whereas the BET specific surface area evolved from 102 to 268 m² g⁻¹, respectively. A possible formation mechanism was also proposed for these TiO₂ nanostructures. The excellent reversible capacity and rate capability were achieved for the anatase nanoflowers because of the small crystallite size and significantly large surface area.     

Chlorobenzene total oxidation over palladium supported on ZrO2, TiO2 nanostructured supports

Two series of supported Pd catalysts were synthesized on new mesoporous–macroporous supports (ZrO₂, TiO₂) labelled M (Zr and Ti). The deposition of palladium was carried out by wet impregnation on the calcined TiO₂ and ZrO₂ supports at 400 °C (Pd/Zr₄, Pd/Ti₄) and 600 °C (Pd/Zr₆, Pd/Ti₆) and followed by a calcination at 400 °C for 4 h. The pre-reduced Pd/MX catalysts were investigated for the chlorobenzene total oxidation and their catalytic properties where compared to those of a reference catalyst Pd/Ti-Ref (TiO₂ from Huntsman Tioxide recalcined at 500 °C) and of a palladium supported on the fresh mesoporous–macroporous TiO₂ (Pd/Ti). Based on the activity determined by T₅₀, the Pd/Ti and Pd/Ti₄ catalysts have been found to be more active than the reference one. Moreover activity decreased owing to the sequence: Pd/TiX  Pd/ZrX and in each series when the temperature of calcination of the support was raised. The overall results clearly showed that the activity was dependant on the nature of the support. The better activity of Pd/TiX compared to Pd/ZrX was likely due to a better reducibility of the TiO₂ support (Ti⁴⁺ into Ti³⁺) leading to an enhancement of the oxygen mobility. Production of polychlorinated benzenes PhCl_x (x = 2–6) and of Cl₂ was also observed. Nevertheless at 500 °C the selectivity in HCl was higher than 90% for the best catalysts.     

TiO2 nanotubes and CNT–TiO2 hybrid materials for the photocatalytic oxidation of propene at low concentration

In this work, we investigated titanium dioxide (TiO₂) nanotubes and CNT–TiO₂ hybrid materials for the photocatalytic oxidation (PCO) of propene at low concentration (100 ppmv) in gaseous phase. The materials were prepared via sol–gel method using sacrificial multi-walled carbon nanotubes (CNT) as templates and subsequent heat treatments to obtain the desired crystalline phase (anatase, rutile or a mixture of both) and eventually to remove the carbon template. We also studied rutile nanotubes for the first time and demonstrate that the activity strongly depends on the crystalline composition, following rutile < anatase < anatase/rutile mixture. The enhanced activity of the anatase–rutile mixture is attributed to the decrease in the electron–hole pair recombination due to the multiphasic nature of the particles. The key result of this work is the exceptional performance of the CNT–TiO₂ hybrid, which yielded the highest observed photocatalytic activity. The improved performance is attributed to synergistic effects due to the hybrid nature of the material, resulting in small anatase crystalline sizes (CNT act as heat sinks) and a reduced electron–hole pair recombination rate (CNTs act as electron traps). These results demonstrate the great potential of hybrid materials and stimulate further research on CNT-inorganic hybrid materials in photocatalysis and related areas.     

Support modification to improve the sulphur tolerance of Ag/Al2O3 for SCR of NOx with propene under lean-burn conditions

Ag/Al₂O₃ catalysts with 1 wt% SiO₂ or TiO₂ doping in alumina support have been prepared by wet impregnation method and tested for sulphur tolerance during the selective catalytic reduction (SCR) of NO_x using propene under lean conditions. Ag/Al₂O₃ showed 44% NO_x conversion at 623 K, which was drastically reduced to 21% when exposed to 20 ppm SO₂. When Al₂O₃ support in Ag/Al₂O₃ was doped with 1 wt% SiO₂ or TiO₂ the NO_x conversion remained constant in presence of SO₂ showing the improved sulphur tolerance of these catalysts. Subsequent water addition does not induce significant deactivation. On the contrary, a slight promotional effect on the activity of NO conversion to nitrogen is observed after Si and Ti incorporation. FTIR study showed the sulphation of silver and aluminum sites of Ag/Al₂O₃ catalysts resulting in the decrease in the formation of reactive intermediate species such as –NCO, which in turn decreases NO_x conversion to N₂. In the case of Ag/Al₂O₃ doped with SiO₂ or TiO₂, formation of silver sulphate and aluminum sulphate was drastically reduced, which was evident in FTIR resulting in remarkable improvement in the sulphur tolerance of Ag/Al₂O₃ catalyst. These catalysts before and after the reaction have been characterized with various techniques (XRD, BET surface area, transmittance FTIR and pyridine adsorption) for physico-chemical properties.