Carbonization and liquid-crystal (mesophase) development. 8. The co-carbonization of coals with acenaphthylene and decacyclene

Several coals of different rank have been carbonized singly and also co-carbonized with acenaphthylene and decacyclene. The resultant cokes were mounted in resin and polished surfaces were examined for optical texture using a polarized-light optical microscope fitted with a half-wave retarder plate. The optical texture can be assessed qualitatively (visually) or quantitatively by a point-counting technique in terms of size and shape of constituent isochromatic anisotropic units. Some cokes from coals were Isotropic. Acenaphthylene was only able to exert a smaller influence than decacyclene on the optical texture of the resultant cokes from co-carbonizations. Decacyclene was able to modify the optical texture for both the low-rank non-fusible and the caking coals. The effects of changing the proportions of coal to additive were examined. Results are interpreted in terms of ‘depolymerization’ of the coal by the action of the additive (as solvent) and also by the action of the additive in modifying the processes of formation of semi-coke via nematic liquid crystals.     

Hydrogen donor and acceptor abilities of pitch: 1H n.m.r. study of hydrogen transfer to anthracene

Petroleum pitches, coal-extract solutions and hydrogenated coal-extract solutions are co-carbonized with anthracene at 673 K. Chloroform-soluble fractions of the system are monitored by ¹H n.m.r. for formation of 9.10 dihydroanthracene (DHA). A hydrogenated coal-extract solution is also co-carbonized at 673 K with anthracene together with thianthrene and sulphur. Ashland A240 petroleum pitch and anthracene are co-carbonized with hydrogenated anthracene oil and resultant ¹H n.m.r. spectra are analysed for DHA. The pitches and coal-extract solutions are carbonized to 823 K and the optical textures of resultant cokes are assessed by optical microscopy. The purpose of the study is to assess if pitches which form cokes with larger optical textures or have greater abilities to modify the carbonization behaviour of coals also have the ability to act as ‘hydrogen shuttles’ in the carbonization system. Results would indicate that such pitches produce the largest amounts of DHA. It is proposed that the most efficient of the modifying pitches operate by extending the zone of temperature of maximum fluidity and by increasing the value of maximum fluidity by removal by proton transfer of radicals which if left in the carbonizing system would interact to form cokes of smaller optical texture.     

Carbonization and liquid-crystal (mesophase) development. 10. The co-carbonization of coals with solvent-refined coals and coal extracts

Coals (NCB rank 102 to 902) were co-carbonized with solvent-refined coals and coal extracts, mixing ratio of 7:3, to 873 K, heating at 10 K min^?1 with a soak period of 1 h. Resultant cokes were examined in polished section using reflected polarized-light microscopy and optical textures were recorded photographically. These optical textures were compared to assess the ability of the additive pitch to modify both the size and extent of optical texture of resultant cokes. The objective of the study is to provide a fundamental understanding of the use of pitch materials in co-carbonizations of lower-rank coals to make metallurgical coke. A Gulf SRC was able to modify the optical texture of cokes from all coals except the anthracite. Soluble fractions of this Gulf SRC were less effective than the parent SRC. A coal extract (NCB D112) modified coke optical texture, the extent being enhanced as the rank of coal being extracted was increased. Hydrogenation of the coal extract increased the penetration of the pitch into the coal particles but simultaneously reduced the size of the optical texture relative to the non-hydrogenated pitch. This indicates a positive interaction of pitch with coal in the co-carbonization process. The optical texture of the cokes from the hydrogenated coal extract in single carbonizations was larger than that from the non-hydrogenated material. Mechanisms explaining these effects are briefly described.     

The co-carbonization of oxidized coals with pitches and decacyclene

Coals of rank (NCB) 701, 401 and 204 were oxidized in air at 371 K for up to 15 days. The changes in optical texture of cokes from these coals were monitored by optical microscopy and point counting. The oxidized coals were cocarbonized to 1273 K with up to 30% of A240 petroleum pitch, a hydrogenated coal extract and decacyclene, and the resultant cokes were reassessed. The increase in isotropy in cokes caused by the oxidation treatment was never completely removed by use of the additives, but significant improvements existed for the less extensively oxidized coals. The possibility exists of using co-carbonization of oxidized coals with additives in coke making. Additives with good hydrogen donor ability, as with the coal extract, appear to be the most suitable.     

Carbonization and liquid-crystal (mesophase) development. 9. The co-carbonization of vitrains with Ashland A200 petroleum pitch

Vitrains from a wide range of ranks of coals were carbonized singly and also co-carbonized (HTT 1273 K) with 25% of Ashland A200 petroleum pitch. Polished surfaces of the resultant cokes were examined for optical texture in a polarizing-light optical microscope using a half-wave retarder plate to produce interference colours. For the anthracites, there is no modification of either component during co-carbonization. The growth of optical texture from the A200 pitch is not affected. For all caking vitrains the optical texture of coke from the blend system is extensively modified when compared to the optical texture of coke from the vitrain. For the low-rank non-caking vitrains the isotropic coke becomes totally or partially anisotropic in co-carbonization. The mechanism of modification of the optical texture of resultant cokes is related to the formation of nematic liquid crystals, mesophase and the semi-coke. It is not considered that the chemistry of pyrolysis is modified on cocarbonization of the vitrain and pitch.     

Carbonization behavior of hydrogenated ethylene tar pitch

Carbonization behavior of ethylene tar pitch has been studied with respect to mesophase formation by means of modification of the chemical composition of the starting materials. The hydrogen treatment of ethylene tar pitch has been carried out over the temperature range from 473 to 673 K under a pressure of 10 MPa without catalyst. Then, the hydrogenated ethylene tar pitches were carbonized at 723 K and the optical texture of the resultant cokes were assesed by optical microscopy. It was revealed that the carbonization of the ethylene tar pitch hydrogenated at 673 K gives a coke of optical texture with enlarged flow-domain. The hydrogen-transfer ability of the ethylene tar pitches during the temperature range of mesophase formation was estimated by the method of 9,10 dihydroanthracene (DHA) formation through co-carbonization of the pitch with anthracene. It was recognized that the larger the amount of conversion of DHA, the better is the development of optical texture.     

Carbonization and liquid-crystal (mesophase) development. 17. Co-carbonization of a solvent-refined coal with petroleum pitches and hydrogenated coal-extract solution

This study characterizes the optical textures of cokes prepared by the carbonization of Ashland petroleum pitches, of non-hydrogenated and hydrogenated coal-extract solutions (CES) and of blends of non-hydrogenated CES materials with the petroleum pitches and hydrogenated CES materials. At an HTT of 823 K petroleum pitches produce cokes with large sized optical texture of flow-type anisotropy characteristic of needle-cokes. The non-hydrogenated CES materials produce cokes with optical textures of mozaics, 2–10 μm. However, following hydrogenation the CES materials carbonized to cokes all of which possess considerable large sized optical textures which for some materials resemble that of needle-cokes by possessing strong flow-type anisotropy, > 100 μm. Hydrogenation of the CES materials evidently facilitates the physical and chemical requirements for growth and coalescence of lamellar nematic liquid-crystals and mesophase from the fluid phase of carbonization leading to anisotropic carbon. Co-carbonizations of the non-hydrogenated and hydrogenated CES materials exhibit the dominant partner effect and are comparable in behaviour with Ashland petroleum pitches which are known to produce needle-cokes on carbonization.     

Co-carbonization of hard coals and coal extracts 1. The co-carbonization of low rank coals with extracts

Studies on the influence of an additive derived from coal on the coking properties of lower-rank coals and on the structure of cokes obtained from blends have been undertaken in our laboratory since 1978. The two coal extracts from flame coal (Int. Class. 900) and gas-coking coal (Int. Class. 632) were used as additives. The results indicate that the blends prepared from low-rank coals — flame coal (Int. Class. 900), gas-flame coal (Int. Class. 721) and the extracts possess better coking properties in comparison to the parent coals. The optical texture and the degree of structure ordering of the cokes obtained from blends is related to the amount of extract in the blend. With increasing extract content in the blend, increases were observed in the amount of optically anisotropic areas in cokes from low-rank coal/extract blends and the crystallite height (L_c) of cokes from the blends. The isotropic optical texture of cokes from low-rank coals can be modified by coal extracts to an anisotropic optical texture. The non-fusible coal is the most difficult to modify. An explanation of the observed phenomena is given.     

Carbonization and liquid-crystal (mesophase) development. Part 4. Carbonization of coal-tar pitches and coals of increasing rank

Coal-tar pitches, from coals of different rank and with various quinoline-insoluble contents, were carbonized under pressure (67 to 200 MN m⁻²) to maximum temperatures of 923 K. The resultant cokes were examined by optical and scanning electron microscopy in terms of size and shape of anisotropic structures within the coke. Natural quinoline-insolubles and carbon blacks both destroyed growth of the mesophase and development of anisotropy. Graphite particles (<10 μm) promoted growth and coalescence of the mesophase. Fourteen coals, of carbon content 77 to 91 wt%, VM 41 to 26%, were similarly carbonized under pressure. In the lower-rank coals no microscopically resolvable anisotropic mesophase was produced, but at a carbon content of 85% anisotropic units 1–2 μm in diameter were detected, increasing in size at a carbon content of 90% to 5 μm diameter. Results are discussed in terms of the origins of anisotropic mosaics observed in cokes, their variation in size with coal rank, and their significance in the carbonization of coal.     

Carbonization and liquid-crystal (mesophase) development. 13. Kinetic considerations of the co-carbonizations of coals with organic additives

Five coals, of rank from an anthracite to a non-caking coal, have been carbonized singly and also cocarbonized with decacyclene, mixing ratio 7:3, in the temperature range 648 K to 823 K, heating at 10 K min^?1, with various soak times. The objective of the study is to derive the basic factors which influence the kinetics of formation of mesophase and anisotropic coke. Accordingly, resultant cokes were polished and surfaces examined by reflected polarized light in an optical microscope. The size, shape and extent of anisotropic development is discussed in terms of the conditions of carbonization and the rank of coal. In these systems a somewhat larger optical texture results in cokes produced at the higher carbonization temperatures. The temperature of onset of growth of anisotropic carbon in co-carbonizations was below that of either the coal or the decacyclene. Reactivities are evidently modified. The origins, growth and coalescence of growth units of anisotropic carbon in these cocarbonizations of coals with decacyclene are demonstrated.     

Carbonization and liquid—crystal (mesophase) development. 19. Co-carbonization of oxidized coals with model organic compounds

This study examines further the phenomena of the modification of coal carbonizations by organic additives. Anthracene, pyrene and chrysene modify the carbonization in a closed system of coking coals as observed from increases in the size of optical textures of resultant cokes. Weakly caking coals are unaffected. Chrysene is the most efficient modifier probably because of its lowest calculated free valence. The co-additives tetralin and hydrogenated anthracene oil further enhance the modification processes so obviating the necessity to use hydrogenated additives. Co-carbonizations of oxidized coking and caking coals with decacyclene are effective in removing the effects of mild oxidation. Increased rates of carbonization enhance the sizes of optical textures of resultant cokes.     

Carbonization of hydrogenated ethylene tar pitch; study of the pitch molecular compactness factor and coke optical texture

Compactness factors of aromatic molecules in hydrogenated ethylene tar pitch were calculated as a parameter to relate to properties of mesophase of the carbonization system. Compactness factors, φ, derived from structural analyses of hydrogenated ethylene tar pitch were also related to the size and shape of optical textures of resultant cokes. Hydrogenated ethylene tar pitches having values of φ 〉 0.5 gave cokes with flow type anisotropy and relate to formation of peri-condensed structures. The spin-lattice relaxation times, T₁, for the cokes derived from hydrogenated ethylene tar pitch, are related to their optical texture.     

Carbonization and liquid-crystal (mesophase) development. 22. Micro-strength and optical textures of cokes from coal-pitch co-carbonizations

This study examines the micro-strength and optical textures of a laboratory coke from a base-blend of Freyming and Pocahontas coal (wt ratio, 1:1) and of cokes from the co-carbonization of the blend, with each of five petroleum pitches in various proportions. Coke pieces, 212–600 μm, from the micro-strength test are assessed in terms of origin and propagation of cracks induced by the test. Always, the addition of pitch to the base-blend improves the strength of the resultant cokes, the pitches behaving differently. A qualitative, subjective appraisal of results indicates that increases in coke strength are associated with relative abilities of pitches to interact with the coals to produce a fluid phase, of solution of coal in pitch, which gives an ‘intermediate’ coke with an optical texture of mozaics. This intermediate coke strengthens the bonding at interfaces. Cracks originate predominantly from the shrinkage cracks in the domains of Pocahontas coke. Mozaic structures tend to resist crack propagation. The coal/pitch system may flow around coal particles so containing incipient crack formation in resultant coke particles.     

Carbonization and liquid-crystal (mesophase) development. 12. Mechanisms of the co-carbonization of coals with organic additives

In industrial situations, coals interact with solvents or additives to produce liquid fuels, solvent-refined coal, coal extract and metallurgical coke. In these processes there occurs a wide variation in effects or modifications of the coal by these additives. This paper describes the modifications which can occur, using a wide range of rank of coal, when these coals interact and are co-carbonized with a wide range of additives of different chemical properties. The optical texture of the resultant cokes is given special attention. The objective of the paper is to summarize the current state of knowledge of the mechanisms of these interactions. Possible mechanisms of interactions are summarized, kinetic and chemical structural aspects of reactions are outlined, the importance is mentioned of the formation of liquid phases enabling anisotropic optical textures in modified cokes to be created, and the industrial relevance of its possible development is discussed.     

Carbonization of coal blends: mesophase formation and coke properties

Laboratory investigations of strength of cokes from blends of coals incorporating pitch were supported by 7 kg trials. The stronger cokes showed a greater interaction between coal and pitch to produce an interface component of anisotropic mozaics which is relatively resistant to crack propagation. The process whereby coal is transformed into coke includes the formation of a fluid zone in which develop nematic liquid crystals and anisotropic carbon which is an essential component of metallurgical coke. Strength, thermal and oxidation resistance of coke can be discussed in terms of the size and shape of the anisotropic carbon which constitutes the optical texture of pore-wall material of coke. Coals of different rank form cokes with different optical textures. Blending procedures of non-caking, caking and coking coals involve the interactions of components of the blend to form mesophase and optical texture. Petroleum pitches used as additives are effective in modifying the carbonization process because of an ability to participate in hydrogen transfer reactions.     

Catalytic graphitization of cokes by indigeneous mineral matter

Indigeneous mineral matter in coals acts catalytically towards graphitization during heat treatment of coals to 2273 K. Nineteen coals of a wide range of rank were demineralized by acid extraction. Original and demineralized coals were carbonized in the range 1073–2273 K, and the resulting cokes examined by optical microscopy, X-ray diffraction and phase-contrast high resolution electron microscopy. Optical microscopy indicated the extent of formation of anisotropic carbon in the resultant cokes. The (002) X-ray diffraction profiles indicated three types of catalytic effect, for which electron microscopy demonstrated different crystallite structures and interrelations. The importance of catalytic graphitization in metallurgical cokes in relation to their strength and reactivity is discussed.     

Gasification studies of cokes from coals. The effects of carbonization pressure on optical texture and porosity

Ten coals were carbonized under various pressures (4 kPa, normal pressure and 10 MPa). Optical textures and physical structures of resultant cokes were monitored. The extent of optical anisotropy increased greatly with increasing carbonization pressure, such a trend being more pronounced with the lower-rank coals. Physical structure was also influenced by carbonization pressure. Gasification reactivities of the cokes with carbon dioxide and steam (1200 °C) were studied with respect to their optical anisotropy and physical structure. Gasification reactivities of optical textures were estimated using both the point-counting technique and regression analysis. The reactivities of cokes with the same optical texture produced from the same parent coal were similar. However, there were considerable differences when compared with cokes from different parent coals. Although the values estimated by regression analyses are consistent with those obtained by point-counting, except for the leaflet and inert textures, the physical locations of respective textures can be important in quantitative discussions of their reactivities.     

Structure in cokes from coals of different rank

A range of bituminous coals has been carbonized to 1273 K. Polished surfaces of the solid products, carbons or cokes, are examined for optical texture by optical microscopy. Fracture surfaces of the carbons are examined by scanning electron microscopy (SEM). The carbon from the lowest rank coal (NCB Code No. 702) is isotropic and fracture surfaces are featureless. Carbons from coals of ranks 602, 502 are optically isotropic but fracture surfaces are granular (size 0.1–0.2 μm), indicating small growth units of mesophase. In the carbon/coke from a 401 coal, the anisotropic optical texture and grain size are both ≈0.5–10 μm diameter. Coke from a coking coal (301a, 301b) has a layered structure extending in units of at least 20 μm diameter with sub-structures ~ 1.5 μm within the layers, indicating perhaps that the bedding anisotropy of these coals is not totally lost in the fluid phase of carbonization. The carbons from the higher rank coals have the bedding anisotropy of the parent coal. The combined techniques of optical microscopy and SEM (both before and after etching of the fracture surfaces of coke in chromic acid solution) reveal useful detail of structure in carbons/cokes and of the mechanism of carbonization of coking coals.     

Effect of parent coal rank on the yield and properties of carbonization extracts

The paper describes the study of carbonization of solvent extracts derived from coals of different rank. The solvent was hydrogenated anthacene oil. The characteristics of the parent coals and of their extracts are presented here as well as the mass balance from carbonization of each extract at a final heat-treatment temperature of 803 K, the physicochemical and structural analysis of the cokes obtained, and the chemical analysis of the liquid and gaseous products. The experiments showed that the properties of the carbonization products significantly depend on the physicochemical properties of the parent extracts. Parent coal rank had a slight effect on carbonization yields from extracts, but markedly influences the structure and texture of the solid carbonization products.     

Effects of additions of petroleum coke in coals upon strengths of resultant cokes

Coals of NCB rank 301, 401 and 502 were co-carbonized with pitch-coke breeze pre-carbonized to temperatures between 900–1200 K, in the ratio 9:1. The objective was to provide fundamental information concerning the effect of inert components upon strength of metallurgical coke; these inert components occur naturally in coals and may also be added to coking blends as coke breeze. Polished surfaces of resultant cokes were examined by optical microscopy and fracture surfaces were examined by SEM to investigate the coal-coke/pitch-coke interface for bonding between components and fissure propagation across the interface. Strengths of cokes were measured using a micro-strength apparatus. For three coals, pitch-coke breeze (900 K and highest volatile content) bonded best to the surrounding coal-coke. The interface became increasingly fissured with increasing pre-carbonization temperature of pitch-coke.