The interaction of antihydrogen with simple atoms and molecules

In this paper, we describe calculations that we have carried out of cross sections for rearrangement processes in very low-energy helium + antihydrogen scattering that result in or or . A significantly more accurate method from that used previously [E.A.G. Armour, S. Jonsell, Y. Liu, A.C. Todd, Nucl. Instr. and Meth. B 247 (2006) 127] is used to calculate the entrance channel wave function. Results are presented for the first two processes. Mention is made of the use of the method in calculations of low-energy e⁺H₂ scattering.     

Study of the electronic structures of oxygen doped in LiBaF3 crystal

The most likely substituting positions of impurity oxygen ions in LiBaF₃ crystals are studied using the general utility lattice program (GULP). The calculated results indicate that the main defect model is [] in the O:LiBaF₃ crystal. The electronic structures of the LiBaF₃ crystal with the defect [] are calculated using the DV-Xα method. It can be concluded from the electronic structures that the LiBaF₃ crystal with the defect [] will exhibit a 217-280 nm absorption band and the impurity oxygen will decrease core-valence luminescence yield.     

Morphology and interface structure of α-Fe2O3 islands grown on sapphire by ion-implantation and annealing

The morphology and interface structure of α-Fe₂O₃ islands grown on α-Al₂O₃ single crystals (sapphire) by Fe-ion-implantation and annealing in an oxidizing atmosphere have been studied using transmission electron microscopy. The α-Fe₂O₃ islands have the orientation relationship of and with sapphire. The typical outline of α-Fe₂O₃ islands consists of two (0 0 0 1) and six planes. The interfaces between α-Fe₂O₃ islands and sapphire are semicoherent, that is coherent regions separated by misfit dislocations at the interfaces. When imaged along the direction, the projected Burgers vector is determined to be . When imaged along the direction, the projected Burgers vector is determined to be . These misfit dislocations form a network structure at the interface to accommodate the mismatch between the lattices of the α-Fe₂O₃ and the α-Al₂O₃.     

Atomistic simulations of nanometric dislocation loops in bcc tungsten

Small dislocation loops formed from self-interstitial atoms (SIAs) are commonly found in irradiated metals. These defects significantly influence the mechanical properties of the materials. Atomistic simulations are used to describe nanometric circular dislocation loops with Burger’s vectors , and in bcc tungsten. Particular attention is paid to the habit plane of the loop. Two different embedded atom model (EAM) potentials are used. The energetics and geometry of the loops are studied as a function of their size.     

Development of secondary ion mass spectroscopy using medium energy C60 ion impact

In this paper, we report time-of-flight (TOF) secondary ion mass spectroscopy using primary C₆₀ ions with an energy range from several tens of keV to several hundreds of keV. Application of the spectroscopy to the analysis of a poly(amino acid) film revealed that characteristic peaks, necessary for identification of the amino acid in proteins, show higher intensities for medium energy C₆₀ (120 keV and 540 keV ) impacts than those for low energy C₆₀ (30 keV ) impacts. This finding demonstrates that medium energy C₆₀ ion impacts are useful for highly sensitive characterization of amino acids.     

380 keV proton irradiation effects on photoluminescence of Eu-doped GaN

The effect of 380 keV proton irradiation on the photoluminescence (PL) properties has been investigated for undoped and Eu-doped GaN. As the proton irradiation exceeds , a drastic decrease of PL intensity of the near band-edge emission of undoped GaN was observed. On the other hand, for Eu-doped GaN, the PL emission corresponding to the ⁵D₀→⁷F₂ transition in Eu³⁺ kept the initial PL intensity after the proton irradiation up to . Present results, together with our previous report on electron irradiation results, suggest that Eu-doped GaN is a strong candidate for light emitting devices in high irradiation environment.     

Radiation synthesis of low swelling acrylamide based hydrogels and determination of average molecular weight between cross-links

A comparative analysis of determination of cross-link density (ν_e) of hydrogels by using swelling tests and mechanical measurements has been made. Poly(acrylamide/methacrylamide) P(AAm/MAAm) and poly(acrylamide/hydroxyethyl methacrylate) P(AAm/HEMA) hydrogels were prepared by using gamma rays and used as model hydrogel systems. The uniaxial compression test was applied to cylindrical gel samples in the swollen state at pH 7. Stress-strain curves of hydrogels were evaluated to calculate the shear modulus values. The average molecular weight between cross-links and ν_e obtained from mechanical measurements were significantly different than the values obtained from swelling experiments. Large differences were attributed to the uncertainty on the value of the χ parameter used in the Flory-Rehner equation. ±1% change in this parameter doubled or reduced the value of hydrogel to half value.     

Comparison of secondary ion emission yields for poly-tyrosine between cluster and heavy ion impacts

Emission yields of secondary ions necessary for the identification of poly-tyrosine were compared for incident ion impacts of energetic cluster ions (0.8 MeV , 2.4 MeV , and 4.0 MeV ) and swift heavy monoatomic molybdenum ions (4.0 MeV Mo⁺ and 14 MeV Mo⁴⁺) with similar mass to that of the cluster by time-of-flight secondary ion mass analysis combined with secondary ion electric current measurements. The comparison revealed that (1) secondary ion emission yields per impact increase with increasing incident energy within the energy range examined, (2) the 4.0 MeV impact provides higher emission yields than the impact of the monoatomic Mo ion with the same incident energy (4.0 MeV Mo⁺), and (3) the 2.4 MeV impact exhibits comparable emission yields to that for the Mo ion impact with higher incident energy (14 MeV Mo⁴⁺). Energetic cluster ion impacts effectively produce the characteristic secondary ions for poly-tyrosine, which is advantageous for highly sensitive amino acid detection in proteins using time-of-flight secondary ion mass analysis.